Skip to contentSkip to conversation

Kernel BUG at page_alloc.c:117!

DISCUSSION zine el abidine Hamid 2 participants 2 messages Dec 7, 2005 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hello,

I come back to you. The code of the module wdpiano is the next one :

#include <linux/config.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/fcntl.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>

#define WDIO 0x443
#define WDIODIS 0x43
static int wdpiano_is_open=0; // le fichier driver n'est pas ouvert
static unsigned char tempo=10; //temporisation de 10 second par défaut

MODULE_PARM(tempo, "b"); MODULE_PARM_DESC(tempo, "time-out period from 1s to 255s (default 10s)"); MODULE_AUTHOR("Massinissa AGOUDJIL RATP(R) <[email protected]>"); MODULE_LICENSE("GPL");

static int wdpiano_open(struct inode *inode, struct file *file) {
if (MINOR(inode->i_rdev)!=WATCHDOG_MINOR) return
-ENODEV;
// access exclusive au fichier de driver if (wdpiano_is_open) return -EBUSY;
// Comptage du nombre de chargement MOD_INC_USE_COUNT;
//Initialise le timeout outb_p(tempo,WDIO);
printk("<1>wdpiano: initialised with a time-out of
%ds\n",tempo);
// limiter l'ouverture
wdpiano_is_open=1;
return 0;
}

static int wdpiano_release(struct inode *inode, struct file *file) {
if (MINOR(inode->i_rdev)==WATCHDOG_MINOR) {

#ifndef CONFIG_WATCHDOG_NOWAYOUT
      //désactiver le watchdog à la fermeture
      inb_p(WDIO);
      inb_p(WDIODIS);
#endif
      wdpiano_is_open=0;

}
MOD_DEC_USE_COUNT;
return 0;
}

static ssize_t wdpiano_write(struct file *file, const char *buf, size_t count, loff_t *ppos) {
if (ppos!=&file->f_pos)

     return -ESPIPE;
   if (count) {
      //reinitialiser le timer du watchdog
      inb_p(WDIODIS);
      inb_p(WDIO);
      return 1;

}
return 0;
}
//Un petit message!
static int wdpiano_notify_sys(struct notifier_block *this, unsigned long code,

	void *unused) {
	if(code==SYS_DOWN || code==SYS_HALT) {
	    //désactiver le watchdog à la fermeture
      	    inb_p(WDIO);
      	    inb_p(WDIODIS);
	}
	return NOTIFY_DONE;
}

static struct file_operations wdpiano_fops = {
owner: THIS_MODULE,

// read:           wdpiano_read,
   write:          wdpiano_write,
   open:           wdpiano_open,
   release:        wdpiano_release,

};

static struct miscdevice wdpiano_dev = {
WATCHDOG_MINOR, //fixer le mineur voir miscdevice.h
et devices.txt
"watchdog", //fixer le nom de fichier d'accee
&wdpiano_fops
};

static struct notifier_block wdpiano_notifier = {
wdpiano_notify_sys,

     NULL,
     0
};

int init_module(void)
{
int retval;

printk("Piano watchdog driver RATP(r) V1.0\n");

wdpiano_dev.fops = &wdpiano_fops;
// Allocation des ressources
register_reboot_notifier(&wdpiano_notifier);
// Enregistrement du module
retval = misc_register(&wdpiano_dev);
/* if (retval)
return retval;*/
return 0;
}

void cleanup_module(void)
{
printk("<1>wdpiano: cleanup_module\n");

// Suppression du module
misc_deregister(&wdpiano_dev);
//liberation des ressources
unregister_reboot_notifier(&wdpiano_notifier);
}

Thank's for your help.

Zine

--- Dirk Henning Gerdes <[email protected]> a écrit :

Quoted 68 lines

Hi Zine!

That is not the point. But I suppose that the module which runs under
2.4.18 won't run under Linux 2.6. Or quite even under 2.4.32.
That could cause some problems, either.
If the vendor would give you a new version compatible to 2.6, you could
update your whole kernel.

Am Dienstag, den 06.12.2005, 11:35 +0100 schrieb zine el abidine Hamid:

Quoted 4 lines

Why? Do you think that the problem is the module
wdpiano?

It's a small program which modify the Watch-Dog

Timer

Quoted 3 lines

value only...

--- Dirk Henning Gerdes <[email protected]> a

écrit

Quoted 3 lines

:

Quoted 1 line

Probably you can contact the manufactor of the

board

Quoted 2 lines
Quoted 2 lines

to get a driver for
the watchdog, which runs under newer

Linux-versions,

Quoted 3 lines
Quoted 3 lines

if you really need
the watchdog
Am Montag, den 05.12.2005, 17:48 +0100 schrieb

zine

Quoted 3 lines
Quoted 3 lines

el abidine Hamid:

Quoted 2 lines

I don't know if it's helpfull but the output

of

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines

ksymoops is :

ksymoops 2.4.4 on i686 2.4.18-3. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.18-3/ (default) -m /boot/System.map-2.4.18-3 (default)

Warning: You did not tell me where to find

symbol

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

information. I will
assume that the log matches the kernel and

modules

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

that are running
right now and I'll use the default options

above

Quoted 3 lines
Quoted 3 lines

for

Quoted 2 lines

symbol resolution.
If the current kernel and/or modules do not

match

Quoted 6 lines
Quoted 6 lines

the

Quoted 2 lines

log, you can get
more accurate output by telling me the kernel

version

Quoted 2 lines

and where to find
map, modules, ksyms etc. ksymoops -h explains

the

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

options.

Quoted 19 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line

Error (expand_objects): cannot

stat(/lib/ext3.o)

Quoted 4 lines
Quoted 4 lines

for

Quoted 3 lines

ext3
ksymoops: No such file or directory Error (expand_objects): cannot

stat(/lib/jbd.o)

Quoted 11 lines
Quoted 10 lines

for

Quoted 8 lines

jbd

....

Warning (compare_maps): parport symbol parport_unregister_port not found in

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o.

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Ignoring

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o

Quoted 7 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines

entry
Warning (compare_maps): parport symbol parport_wait_event not found in

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o.

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Ignoring

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o

Quoted 7 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines

entry
Warning (compare_maps): parport symbol parport_wait_peripheral not found in

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o.

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Ignoring

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o

Quoted 8 lines
Quoted 7 lines
Quoted 6 lines
Quoted 2 lines

entry
Warning (compare_maps): parport symbol

parport_write

Quoted 2 lines

not found in

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o.

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Ignoring

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o

Quoted 38 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

entry
Warning (map_ksym_to_module): cannot match

loaded

Quoted 1 line
Quoted 1 line
Quoted 1 line

module ext3 to a unique module object. Trace

may

Quoted 3 lines
Quoted 3 lines

not

Quoted 2 lines

be reliable.
Warning (map_ksym_to_module): cannot match

loaded

Quoted 1 line
Quoted 1 line
Quoted 1 line

module jbd to a unique module object. Trace

may

Quoted 3 lines
Quoted 3 lines

not

Quoted 2 lines

be reliable.

Dec  1 14:54:58 Republique_ncl_a kernel:

kernel

Quoted 3 lines
Quoted 3 lines

BUG at

Quoted 2 lines

page_alloc.c:117!

Dec  1 14:54:58 Republique_ncl_a kernel:

invalid

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

operand: 0000

Dec  1 14:54:58 Republique_ncl_a kernel: CPU: 

0

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Dec  1 14:54:58 Republique_ncl_a kernel: EIP: 

0010:[<c01316e7>] Not tainted

Using defaults from ksymoops -t elf32-i386 -a

i386

Quoted 1 line
Quoted 1 line
Quoted 1 line
Dec  1 14:54:58 Republique_ncl_a kernel:

EFLAGS:

Quoted 8 lines
Quoted 8 lines
Quoted 2 lines

00010282

Dec  1 14:54:58 Republique_ncl_a kernel: eax:

00000020

Quoted 2 lines

ebx: c16502d8 ecx: 00000001 edx: 000019

Dec  1 14:54:58 Republique_ncl_a kernel: esi:

00000000

Quoted 2 lines

edi: 000001d0 ebp: 00000000 esp: c1755f

Dec  1 14:54:58 Republique_ncl_a kernel: ds:
Quoted 35 lines

0018

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

es: 0018 ss: 0018

Dec  1 14:54:58 Republique_ncl_a kernel:

Process

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

kswapd (pid: 5, stackpage=c1755000)

Dec  1 14:54:58 Republique_ncl_a kernel:
Stack:
Quoted 26 lines
Quoted 26 lines
Quoted 1 line

c02250b5 00000075 c013d0e3 ddf7e600 c16502d8

000001d

Quoted 3 lines
Dec  1 14:54:58 Republique_ncl_a kernel:      

c16502f4 c16502d8 c16502d8 000001d0 000001d0

c012ff8

Quoted 3 lines
Dec  1 14:54:58 Republique_ncl_a kernel:      

00000125 c02c473c 00000c24 00000848 0000000f

c013038

Quoted 1 line
Dec  1 14:54:58 Republique_ncl_a kernel: Call

Trace:

Quoted 2 lines

[<c013d0e3>] try_to_free_buffers [kernel] 0xb3

Dec  1 14:54:58 Republique_ncl_a kernel:

[<c013b23a>]

Quoted 2 lines

try_to_release_page [kernel] 0x3a

Dec  1 14:54:58 Republique_ncl_a kernel:

[<c012ff8b>]

Quoted 2 lines

page_launder_zone [kernel] 0x42b

Dec  1 14:54:58 Republique_ncl_a kernel:

[<c0130388>]

Quoted 2 lines

page_launder [kernel] 0x168

Dec  1 14:54:58 Republique_ncl_a kernel:

[<c0130c12>]

Quoted 2 lines

do_try_to_free_pages [kernel] 0x12

Dec  1 14:54:58 Republique_ncl_a kernel:

=== message truncated ===

___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

#2 lore raw

Hi Zine!

I didn't get that you have the source-code of the module. The keyword "tainted" in your lsmod-output shows, that you have a propritary driver loaded in your system. I thought that would be the watchdog-driver. But from the sourcecode you can see, that the driver stands under gpl and won't taint your kernel.
I would strongly suggest to update to 2.4.32 and recompile the watchdog-module. I don't think, that you will find an error in such old code in an acceptable time.

Dirk

Am Mittwoch, den 07.12.2005, 10:40 +0100 schrieb zine el abidine Hamid:

Quoted 381 lines

Hello,

I come back to you. The code of the module wdpiano is the next one :

#include <linux/config.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/fcntl.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/init.h>

#define WDIO 0x443
#define WDIODIS 0x43
static int wdpiano_is_open=0; // le fichier driver n'est pas ouvert
static unsigned char tempo=10; //temporisation de 10 second par défaut

MODULE_PARM(tempo, "b"); MODULE_PARM_DESC(tempo, "time-out period from 1s to 255s (default 10s)"); MODULE_AUTHOR("Massinissa AGOUDJIL RATP(R) <[email protected]>"); MODULE_LICENSE("GPL");

static int wdpiano_open(struct inode *inode, struct

file *file) {
   if (MINOR(inode->i_rdev)!=WATCHDOG_MINOR) return
-ENODEV;
   // access exclusive au fichier de driver
   if (wdpiano_is_open) return -EBUSY;
   // Comptage du nombre de chargement
   MOD_INC_USE_COUNT;
   //Initialise le timeout
   outb_p(tempo,WDIO);
    printk("<1>wdpiano: initialised with a time-out of
%ds\n",tempo);
   // limiter l'ouverture 
   wdpiano_is_open=1;
   return 0;
}

static int wdpiano_release(struct inode *inode, struct

file *file) {
   if (MINOR(inode->i_rdev)==WATCHDOG_MINOR) {
#ifndef CONFIG_WATCHDOG_NOWAYOUT
      //désactiver le watchdog à la fermeture
      inb_p(WDIO);
      inb_p(WDIODIS);
#endif
      wdpiano_is_open=0;
   }
   MOD_DEC_USE_COUNT;
   return 0;
}

static ssize_t wdpiano_write(struct file *file, const

char *buf, size_t count, loff_t *ppos) {
   if (ppos!=&file->f_pos)
     return -ESPIPE;
   if (count) {
      //reinitialiser le timer du watchdog
      inb_p(WDIODIS);
      inb_p(WDIO);
      return 1;
   }
   return 0;
}
//Un petit message!
static int wdpiano_notify_sys(struct notifier_block
*this, unsigned long code,
	void *unused) {
	if(code==SYS_DOWN || code==SYS_HALT) {
	    //désactiver le watchdog à la fermeture
      	    inb_p(WDIO);
      	    inb_p(WDIODIS);
	}
	return NOTIFY_DONE;
}

static struct file_operations wdpiano_fops = {
owner: THIS_MODULE,

// read:           wdpiano_read,
   write:          wdpiano_write,
   open:           wdpiano_open,
   release:        wdpiano_release,

};

static struct miscdevice wdpiano_dev = {
WATCHDOG_MINOR, //fixer le mineur voir miscdevice.h
et devices.txt
"watchdog", //fixer le nom de fichier d'accee
&wdpiano_fops
};

static struct notifier_block wdpiano_notifier = {
   wdpiano_notify_sys,
     NULL,
     0
};

int init_module(void)
{
int retval;

printk("Piano watchdog driver RATP(r) V1.0\n");

wdpiano_dev.fops = &wdpiano_fops;
// Allocation des ressources
register_reboot_notifier(&wdpiano_notifier);
// Enregistrement du module
retval = misc_register(&wdpiano_dev);
/* if (retval)
return retval;*/
return 0;
}

void cleanup_module(void)
{
printk("<1>wdpiano: cleanup_module\n");

// Suppression du module
misc_deregister(&wdpiano_dev);
//liberation des ressources
unregister_reboot_notifier(&wdpiano_notifier);
}

Thank's for your help.

Zine

--- Dirk Henning Gerdes <[email protected]> a écrit :

Quoted 68 lines

Hi Zine!

That is not the point. But I suppose that the module which runs under
2.4.18 won't run under Linux 2.6. Or quite even under 2.4.32.
That could cause some problems, either.
If the vendor would give you a new version compatible to 2.6, you could
update your whole kernel.

Am Dienstag, den 06.12.2005, 11:35 +0100 schrieb zine el abidine Hamid:

Quoted 4 lines

Why? Do you think that the problem is the module
wdpiano?

It's a small program which modify the Watch-Dog

Timer

Quoted 3 lines

value only...

--- Dirk Henning Gerdes <[email protected]> a

écrit

Quoted 3 lines

:

Quoted 1 line

Probably you can contact the manufactor of the

board

Quoted 2 lines
Quoted 2 lines

to get a driver for
the watchdog, which runs under newer

Linux-versions,

Quoted 3 lines
Quoted 3 lines

if you really need
the watchdog
Am Montag, den 05.12.2005, 17:48 +0100 schrieb

zine

Quoted 3 lines
Quoted 3 lines

el abidine Hamid:

Quoted 2 lines

I don't know if it's helpfull but the output

of

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines

ksymoops is :

ksymoops 2.4.4 on i686 2.4.18-3. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.18-3/ (default) -m /boot/System.map-2.4.18-3 (default)

Warning: You did not tell me where to find

symbol

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

information. I will
assume that the log matches the kernel and

modules

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

that are running
right now and I'll use the default options

above

Quoted 3 lines
Quoted 3 lines

for

Quoted 2 lines

symbol resolution.
If the current kernel and/or modules do not

match

Quoted 6 lines
Quoted 6 lines

the

Quoted 2 lines

log, you can get
more accurate output by telling me the kernel

version

Quoted 2 lines

and where to find
map, modules, ksyms etc. ksymoops -h explains

the

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

options.

Quoted 19 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line

Error (expand_objects): cannot

stat(/lib/ext3.o)

Quoted 4 lines
Quoted 4 lines

for

Quoted 3 lines

ext3
ksymoops: No such file or directory Error (expand_objects): cannot

stat(/lib/jbd.o)

Quoted 11 lines
Quoted 10 lines

for

Quoted 8 lines

jbd

....

Warning (compare_maps): parport symbol parport_unregister_port not found in

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o.

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Ignoring

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o

Quoted 7 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines

entry
Warning (compare_maps): parport symbol parport_wait_event not found in

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o.

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Ignoring

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o

Quoted 7 lines
Quoted 6 lines
Quoted 5 lines
Quoted 4 lines

entry
Warning (compare_maps): parport symbol parport_wait_peripheral not found in

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o.

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Ignoring

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o

Quoted 8 lines
Quoted 7 lines
Quoted 6 lines
Quoted 2 lines

entry
Warning (compare_maps): parport symbol

parport_write

Quoted 2 lines

not found in

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o.

Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Ignoring

/lib/modules/2.4.18-3/kernel/drivers/parport/parport.o

Quoted 38 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

entry
Warning (map_ksym_to_module): cannot match

loaded

Quoted 1 line
Quoted 1 line
Quoted 1 line

module ext3 to a unique module object. Trace

may

Quoted 3 lines
Quoted 3 lines

not

Quoted 2 lines

be reliable.
Warning (map_ksym_to_module): cannot match

loaded

Quoted 1 line
Quoted 1 line
Quoted 1 line

module jbd to a unique module object. Trace

may

Quoted 3 lines
Quoted 3 lines

not

Quoted 2 lines

be reliable.

Dec  1 14:54:58 Republique_ncl_a kernel:

kernel

Quoted 3 lines
Quoted 3 lines

BUG at

Quoted 2 lines

page_alloc.c:117!

Dec  1 14:54:58 Republique_ncl_a kernel:

invalid

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

operand: 0000

Dec  1 14:54:58 Republique_ncl_a kernel: CPU: 

0

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Dec  1 14:54:58 Republique_ncl_a kernel: EIP: 

0010:[<c01316e7>] Not tainted

Using defaults from ksymoops -t elf32-i386 -a

i386

Quoted 1 line
Quoted 1 line
Quoted 1 line
Dec  1 14:54:58 Republique_ncl_a kernel:

EFLAGS:

Quoted 8 lines
Quoted 8 lines
Quoted 2 lines

00010282

Dec  1 14:54:58 Republique_ncl_a kernel: eax:

00000020

Quoted 2 lines

ebx: c16502d8 ecx: 00000001 edx: 000019

Dec  1 14:54:58 Republique_ncl_a kernel: esi:

00000000

Quoted 2 lines

edi: 000001d0 ebp: 00000000 esp: c1755f

Dec  1 14:54:58 Republique_ncl_a kernel: ds:
Quoted 35 lines

0018

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

es: 0018 ss: 0018

Dec  1 14:54:58 Republique_ncl_a kernel:

Process

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

kswapd (pid: 5, stackpage=c1755000)

Dec  1 14:54:58 Republique_ncl_a kernel:
Stack:
Quoted 26 lines
Quoted 26 lines
Quoted 1 line

c02250b5 00000075 c013d0e3 ddf7e600 c16502d8

000001d

Quoted 3 lines
Dec  1 14:54:58 Republique_ncl_a kernel:      

c16502f4 c16502d8 c16502d8 000001d0 000001d0

c012ff8

Quoted 3 lines
Dec  1 14:54:58 Republique_ncl_a kernel:      

00000125 c02c473c 00000c24 00000848 0000000f

c013038

Quoted 1 line
Dec  1 14:54:58 Republique_ncl_a kernel: Call

Trace:

Quoted 2 lines

[<c013d0e3>] try_to_free_buffers [kernel] 0xb3

Dec  1 14:54:58 Republique_ncl_a kernel:

[<c013b23a>]

Quoted 2 lines

try_to_release_page [kernel] 0x3a

Dec  1 14:54:58 Republique_ncl_a kernel:

[<c012ff8b>]

Quoted 2 lines

page_launder_zone [kernel] 0x42b

Dec  1 14:54:58 Republique_ncl_a kernel:

[<c0130388>]

Quoted 2 lines

page_launder [kernel] 0x168

Dec  1 14:54:58 Republique_ncl_a kernel:

[<c0130c12>]

Quoted 2 lines

do_try_to_free_pages [kernel] 0x12

Dec  1 14:54:58 Republique_ncl_a kernel:

=== message truncated ===

___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

Signature · 7 lines
Dirk Henning Gerdes
Bönnersdyk 47
47803 Krefeld

Tel:  02151-755745
      0174-7776640
Mail: [email protected]