Skip to contentSkip to conversation

PATCH: Pre UDMA EIDE PIO mode selection

PATCH Applied Alan Cox 2 participants 2 messages Jan 9, 2006 – Jan 17, 2006 SCSI

lore
Share & tools
lore

Alan Cox

author
#0 lore raw

I misread the spec when doing the original. I've tested the corrected version with pre UDMA drives and it now picks the right modes. This is a specific bug fix rather than an update or new feature item.

drivers/scsi/libata-core.c +9 -5
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.15-mm2/drivers/scsi/libata-core.c linux-2.6.15-mm2/drivers/scsi/libata-core.c
@@ -1052,18 +1057,22 @@
 {
 	u16 modes;
 
-	/* Usual case. Word 53 indicates word 88 is valid */
-	if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) {
+	/* Usual case. Word 53 indicates word 64 is valid */
+	if (adev->id[ATA_ID_FIELD_VALID] & (1 << 1)) {
 		modes = adev->id[ATA_ID_PIO_MODES] & 0x03;
 		modes <<= 3;
 		modes |= 0x7;
 		return modes;
 	}
 
-	/* If word 88 isn't valid then Word 51 holds the PIO timing number
-	   for the maximum. Turn it into a mask and return it */
-	modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ;
+	/* If word 64 isn't valid then Word 51 high byte holds the PIO timing
+	   number for the maximum. Turn it into a mask and return it */
+	modes = (2 << ((adev->id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF)) - 1 ;
 	return modes;
+	/* But wait.. there's more. Design your standards by committee and
+	   you too can get a free iordy field to process. However its the 
+	   speeds not the modes that are supported... Note drivers using the
+	   timing API will get this right anyway */
 }
 
 struct ata_exec_internal_arg {
Applied
#1 lore raw
Quoted 5 lines · Alan Cox

I misread the spec when doing the original. I've tested the corrected version with pre UDMA drives and it now picks the right modes. This is a specific bug fix rather than an update or new feature item.

applied to 'upstream'