reality check: dsdt.dsl -> compile -> DSDT.aml -> decompile -> DSDT.dsl but dsdt.dsl neq DSDT.dsl
I am attempting to hack my dsdt ...
There are two puzzling things here. Comment is invited.
1. what/where is RSDT
2. if I compile dsdt.dsl to get DSDT.aml, then decompile DSDT.aml to get DSDT.dsl ... shouldn't I expect DSDT.dsl == dsdt.dsl?
here's the gory details:
machine: acer aspire 3003LC
linux: ubuntu 5.10
kernel: 2.6.12-9-686 (ubuntu standard - via apt-get)
# iasl -g
Intel ACPI Component Architecture
ASL Optimizing Compiler version 20050930 [Nov 20 2005] Copyright (C) 2000 - 2005 Intel Corporation Supports ACPI Specification Revision 3.0
Could not obtain RSDT
Could not get ACPI tables, AE_NO_ACPI_TABLES
... Well, OK./proc/acpi exists and contains a file called dsdt.
# cp /proc/acpi/dsdt dsdt.dat # iasl -d dsdt.dat # iasl -ta dsdt.dsl
generates a bunch of errors - I googled them, and applied the recommended hacks until the following result:
# iasl -ta dsdt.dsl
Intel ACPI Component Architecture
ASL Optimizing Compiler version 20050930 [Nov 20 2005] Copyright (C) 2000 - 2005 Intel Corporation Supports ACPI Specification Revision 3.0
ASL Input: dsdt.dsl - 3471 lines, 121247 bytes, 1565 keywords AML Output: DSDT.aml - 13975 bytes 377 named objects 1188 executable
opcodes
Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 542 Optimizations
... which seems fine so far.
# cp DSDT.amp /etc/mkinitramfs/DSDT.aml
reboot.
I see a syslog saying that this DSDT.aml is detected and loaded. However, I get errors as follows:
ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node cbed7be0), AE_NOT_FOUND
ACPI-0362: *** Error: Looking up [Z007] in namespace, AE_NOT_FOUND
... ad infinitum.
Puzzled - especially since Z007 does not appear in dsdt.dsl (replaced by "ones" on advice from this forum - a la acer laptops and Z007 being nonexistant anywhere.)
OK - so I try:
# acpi -dc DSDT.aml
which provides the following error:
Error 1061 - Object does not exist (\_PR.CPU0._PPC)
This appears six times overall, across methods:_Q8A, _Q8D, _Q8D ... which seem unhelpful.
I see /proc/acpi/processor/CPU0 contains files;
info limit power throttling
I see that _PPC is a reserved method name:_PPC Method with 0 arguments, must return a value
CPU0 is AMD Mobile Sempron.
So I'm starting to feel a little out to sea.
I could attempt to hack a fix for these new errors, but there's no point if they are an artifact of the decompilation process. I've tried to test this by compiling in compatability mode - the same error crop up, suggesting this is no artifact. However, if I decompile an aml file with the same compiler it was compiled with, shouldn't I end up with the same dsl file I started out with?
I thought it may be that the computer alters the DSDT.aml it uses, but the same result is available from a copy the computer hasn't access to.
Any comments on anything here would be appreciated. Thanks.
Quoted 21 lines · Simon Bridge
# iasl -ta dsdt.dslIntel ACPI Component Architecture
ASL Optimizing Compiler version 20050930 [Nov 20 2005] Copyright (C) 2000 - 2005 Intel Corporation Supports ACPI Specification Revision 3.0ASL Input: dsdt.dsl - 3471 lines, 121247 bytes, 1565 keywords AML Output: DSDT.aml - 13975 bytes 377 named objects 1188 executableopcodes
Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 542 Optimizations
... which seems fine so far.
# cp DSDT.amp /etc/mkinitramfs/DSDT.amlreboot.
I see a syslog saying that this DSDT.aml is detected and loaded. However, I get errors as follows:
Quoted 5 lines
ACPI-0508: *** Error: Method execution failed [\_SB_.BAT1._BST] (Node
cbed7be0),AE_NOT_FOUND
ACPI-0362: *** Error: Looking up [Z007] in namespace,AE_NOT_FOUND... ad infinitum.
Those Z00X objects should get fixed as soon as the next big ACPI patch from Len goes mainline.
This should be interesting for a lot people here, currently patching there DSDTs because of this error.
See: http://bugzilla.kernel.org/show_bug.cgi?id=5322
I expect you used an iasl compiler newer than 20051216 that already includes the fix and therefore does not complain about the missing Z007 object. Your kernel is probably still missing this fix and constantly complains.
You may want to patch 2.6.16-rc1 with Len's latest patches:
http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/patches/test/2.6.16/
If you try this out, I'd be glad if you could report back whether the Z00X issue is really finally solved for you.
Quoted 4 lines
Puzzled - especially since Z007 does not appear in dsdt.dsl (replaced by "ones" on advice from this forum - a la acer laptops and Z007 being nonexistant anywhere.)
...
Quoted 2 lines
which provides the following error:
Error 1061 - Object does not exist (\_PR.CPU0._PPC)
The object is probably declared in SSDT.
acpidmp >/tmp/acpidmp
acpixtract ssdt acpidmp >ssdt
iasl -d ssdt
To get rid of the compiler error just declare it:
External (\_PR.CPU0._PPC)
So that the compiler knows it is declared in some
other, later loaded ACPI table.
Quoted 8 lines
This appears six times overall, across methods:
_Q8A,_Q8D,_Q8D... which seem unhelpful.I see
/proc/acpi/processor/CPU0contains files; info limit power throttlingI see that
_PPCis a reserved method name:_PPCMethod with 0 arguments, must return a value
It is probably because of the above missing external().
If the Z00x is your only problem, don't waste time by trying to rewrite your DSDT, better try out Len's patches and let us know if you still see anything bad.
Thomas