Skip to contentSkip to conversation

U-Boot stop booting after environment change + Environment in large nand flash

U-Boot-Users Chun Kit Edwin Lau 1 participant 1 message Jan 27, 2006

lore
Share & tools
lore
#0 lore raw

Hi everyone,

I have tried the large nand (2k erase size, K9F2G08U0M) code from
testing-NAND. I can erase/read/write the NAND flash in U-Boot. I
didn't try any ECC code, but things seems to be working out fine. I have modded the env_nand.c a bit to add support for environment in NAND for this chip. And it seemed ok.

I have encountered two issues, on my custom AT91RM9200 board

First, when I changed the default U-Boot environment in include/configs/at91rm9200dk.h. The resulting U-Boot didn't even boot. It only have the line

"Uncompressing image"

coming from boot.bin. And this problem was reproducible. And again, the default U-Boot environment was the only thing I changed. Is there a limit on the size of each environment variable? Did I overwrite some part of the program because the environment was too long?

Second, I used fw_printenv to retrieve the U-Boot environment from Linux. (again, I modded it a little to use the large NAND) CRC didn't pass, but in U-Boot the CRC was ok. I uncommented the CRC checking in fw_printenv. And found out that one of the environment was corrupted. But the U-Boot didn't show the corruption. Any idea for the two incidents? Thanx

Edwin