Skip to contentSkip to conversation

[parisc-linux] Re: [Fwd: Parisc - Linux on a HP-UX C8000 machine]

parisc-linux Roel Teuwen 2 participants 3 messages Feb 10, 2006 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 1139531824.5272.1.camel@debian

#1 lore raw

Hello Daniel,

Quoted 5 lines
Quoted 5 lines

I read that you are the owner of the HP-UX C8000 machine in the machine list of the PA_RISC Linux website. In our institute we have the same machine and would like to install a Linux on this machine. We tried the Debian 3.1, the gentoo and the Ubuntu HPPA version but without any success.

As you can read on the hardware database website
(http://www.parisc-linux.org/hardware/index.html), the hardware database just contains links from certain hardware models to specific devices to help the developers.

It is not a list of supported hardware. For that you will be better off following the link on the same page :
http://www.parisc-linux.org/hardware/supported.html and
http://www.pateam.org/list.html

Quoted 1 line
Quoted 1 line

Is it possible to get some help of you?

I see at least a few problems with my C8000 running linux. First of all, I did not yet have any time to test it. Secondly, my C8000 contains PA8900 processors which I don't think anyone has tried yet. I've added the machine to the hardware database with the plan of sending a success/error report to the pateam site and parisc-linux maillist later.

By the way, apparently the HWDB doesn't recognize most of the hardware in this machine to map it to useful entries. (PA8800 and PA8900 are missing for example). I have CC'd the parisc-linux mailing list in the hope that someone might know why.

Quoted 2 lines
Quoted 2 lines

Which distribution did you use and which parameters did you set while booting? Does the graphical user interface works in your installation?

I was planning on using Debian but I don't expect the graphical interface (I suppose you mean X) to work at all. (even the console might not, no tests yet :-) )

Quoted 1 line
Quoted 1 line

I hope you can help us.

Not really, sorry. Someone on the mailinglist might know more or be interested in hearing about any specific problems you have encountered.

Best regards,

Roel

Quoted 5 lines
Quoted 5 lines

Thanks, Daniel

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

Quoted 25 lines
Quoted 25 lines

MPI of Molecular Plant Physiology

Dipl. Inf. (FH)

Daniel Weicht

Bioinformatics Group

Max-Planck-Institut f=FCr Molekulare Pflanzenphysiologie

Wissenschaftspark Golm

Am M=FChlenberg 1

14476 Potsdam-Golm

Germany

Quoted 5 lines
Quoted 5 lines

e-mail: [email protected]

web: http://www.mpimp-golm.mpg.de

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

Quoted 6 lines
Quoted 4 lines

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

#2 lore raw

Roel,
thanks for forwarding.

On Fri, Feb 10, 2006 at 01:51:16AM +0100, Roel Teuwen wrote:
...

Quoted 3 lines

I see at least a few problems with my C8000 running linux. First of all, I did not yet have any time to test it. Secondly, my C8000 contains PA8900 processors which I don't think anyone has tried yet.

I've been trying some rp3440's with pa8800 processors over the past 18 monthes and we still have problems with the L2 cache. I'm very slowly making some forward progress on it but it's nowhere near debugged.

We do think it's related to the use of non-equivalent aliasing by the parisc-linux kernel. HPUX doesn't do that.

So right now don't expect more than a single socket to work and still see occasion segfaults.
If more than one CPU socket is enabled, the box will HPMC with any substatial load that inolves lots of context switching.

Quoted 3 lines

I've added the machine to the hardware database with the plan of sending a success/error report to the pateam site and parisc-linux maillist later.

thanks!

Quoted 4 lines

By the way, apparently the HWDB doesn't recognize most of the hardware in this machine to map it to useful entries. (PA8800 and PA8900 are missing for example). I have CC'd the parisc-linux mailing list in the hope that someone might know why.

We probably need to clone the new entries from arch/parisc/kernel/hardware.c to the php/mysql code that drives the HWDB.
Any volunteers?

Quoted 3 lines

I was planning on using Debian but I don't expect the graphical interface (I suppose you mean X) to work at all. (even the console might not, no tests yet :-) )

I have a C8000 here as well and was told we could probably get X.org working on it with 2D accelleration. We could get 3D HW accel if we could get bugs in the x.org/xfree86 BIOS emulation fixed.

thanks,
grant
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

A message that is not in the archive (sent off-list or not yet received): [email protected]

#4 lore raw
Quoted 5 lines · Thibaut VARENE

And btw, I just noticed that the list on pateam.org reports some "cache issues" with fast A500. Though we believe firmly that L2 and non-equivalent aliasing might be at fault on PA8800/PA8900, I wonder if there are still other cache issues, or if the comments on the list should be cleared. Any update about that? :)

I don't know. I don't think any problems we've seen recently can be attributed to caching issues. The most stable kernel so far seems to be 2.6.13-pa1. But I expect as 2.6.15 gets more exposure on Debian we'll know if that is better and if it has any remaining caching issues.

Quoted 8 lines
Quoted 3 lines

We probably need to clone the new entries from arch/parisc/kernel/hardware.c to the php/mysql code that drives the HWDB.
Any volunteers?

This is not that easy. The underlaying infrastructure of the HWDB is a really PITA, adding new stuff will probably require a bit more hacking. I'll try to figure out what needs to be done and will report about it ;)

The upside of pa8900 being the last one is we won't have to update the HWDB much more. :(

Quoted 2 lines

BTW, if anyone feels like volunteering for a complete redesign of the mysql/php infrastructure, please raise a hand!

I'd like to add, the HWDB maintainer doesn't need to be a linux hacker. If someone from *BSD or HP-UX community wants to maintain it, I certainly won't object.

thanks,
grant
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux