Skip to contentSkip to conversation

RTC subsystem, SA1100/PXA2xx driver

PATCH In review Richard Purdie 2 participants 2 messages Mar 4, 2006 – Mar 5, 2006

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 RTC subsystem, SA1100/PXA2xx driver

Add an RTC subsystem driver for the ARM SA1100/PXA2XX processor RTC.

--

drivers/rtc/Kconfig +10 -0
Index: linux-2.6.15/drivers/rtc/Kconfig
===================================================================
@@ -113,6 +113,16 @@
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-rs5c372.
 
+config RTC_DRV_SA1100
+	bool "SA11x0/PXA2xx RTC support"
+	depends on ARCH_SA1100 || ARCH_PXA
+	help
+	  If you say Y here you will get access to the real time clock
+	  built into your SA11x0 or PXA2xx CPU.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-sa1100.
+
 config RTC_DRV_TEST
 	tristate "Test driver/device"
 	depends on RTC_CLASS
drivers/rtc/Makefile +1 -0
Index: linux-2.6.15/drivers/rtc/Makefile
===================================================================
@@ -17,4 +17,5 @@
 obj-$(CONFIG_RTC_DRV_DS1672)	+= rtc-ds1672.o
 obj-$(CONFIG_RTC_DRV_PCF8563)	+= rtc-pcf8563.o
 obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
+obj-$(CONFIG_RTC_DRV_SA1100)	+= rtc-sa1100.o
 
drivers/rtc/rtc-sa1100.c new file +391 -0

391 lines not on this page · raw message

arch/arm/mach-pxa/generic.c +6 -0
Index: linux-2.6.15/arch/arm/mach-pxa/generic.c
===================================================================
@@ -319,6 +319,11 @@
 	pxaficp_device.dev.platform_data = info;
 }
 
+static struct platform_device pxartc_device = {
+	.name		= "sa1100-rtc",
+	.id		= -1,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&pxamci_device,
 	&udc_device,
@@ -329,6 +334,7 @@
 	&pxaficp_device,
 	&i2c_device,
 	&i2s_device,
+	&pxartc_device,
 };
 
 static int __init pxa_init(void)
arch/arm/mach-sa1100/generic.c +6 -0
Index: linux-2.6.15/arch/arm/mach-sa1100/generic.c
===================================================================
@@ -324,6 +324,11 @@
 	sa11x0ir_device.dev.platform_data = irda;
 }
 
+static struct platform_device sa11x0rtc_device = {
+	.name		= "sa1100-rtc",
+	.id		= -1,
+};
+
 static struct platform_device *sa11x0_devices[] __initdata = {
 	&sa11x0udc_device,
 	&sa11x0uart1_device,
@@ -333,6 +338,7 @@
 	&sa11x0pcmcia_device,
 	&sa11x0fb_device,
 	&sa11x0mtd_device,
+	&sa11x0rtc_device,
 };
 
 static int __init sa1100_init(void)
#1 lore raw
Quoted 3 lines · On Sat, 04 Mar 2006 22:24:37 +0000 Richard Purdie <[email protected]> wrote:

Add an RTC subsystem driver for the ARM SA1100/PXA2XX processor RTC.

Thanks, I will import it in my patchset.

Signature · 6 lines
 Best regards,

 Alessandro Zummo,
  Tower Technologies - Turin, Italy

  http://www.towertech.it