Skip to contentSkip to conversation

Ntfs compability

DISCUSSION Tommi Tapani Piirainen 5 participants 6 messages Mar 14, 2006 – Sep 25, 2007

lore
Share & tools
lore
#0 lore raw

Hi,

I have slackware 10.1. I rewrote my ntfs partition with cfdisk and now I am unable to boot the partition (with windows xp). Can the problem be that i wrote the table with cfdisk or could it be some thing else. In additional there is two different ntfs partition is cfdisk both named same way. I used the first one can't remember the number (or was it 86, don't remember).

The reason for doing this was to include slackware to same disk. First I deleted ntfs partition and made it smaller. Motivation for doing this was mbr chrash due use of "System Mechanic 6" or at least I think so. I intalled lilo to mbr and it fixed the mbr problem. Booting problems can also have some thing to do with System Mechanic 6 altering my dll-files or some thing else.

The ntfs partition is first partition in the disk and I use lilo-bootloader. Can I fix the partition with ntfstools to be bootable?

Signature · 6 lines
Tommi
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#1 lore raw
Quoted 8 lines · Tommi Tapani Piirainen

Hi,

I have slackware 10.1. I rewrote my ntfs partition with cfdisk and now I am unable to boot the partition (with windows xp). Can the problem be that i wrote the table with cfdisk or could it be some thing else. In additional there is two different ntfs partition is cfdisk both named same way. I used the first one can't remember the number (or was it 86, don't remember).

Quoted 11 lines

The reason for doing this was to include slackware to same disk. First I deleted ntfs partition and made it smaller. Motivation for doing this was mbr chrash due use of "System Mechanic 6" or at least I think so. I intalled lilo to mbr and it fixed the mbr problem. Booting problems can also have some thing to do with System Mechanic 6 altering my dll-files or some thing else.

The ntfs partition is first partition in the disk and I use lilo-bootloader. Can I fix the partition with ntfstools to be bootable?

Signature · 1 line
Tommi

Greetings: In other words it looks like you want XP to boot,
but then how would you run Slack; with a floppy??

Anyway could you not re-edit /etc/lilo.conf putting the hda1
notations ahead of the Linux notations; running lilo to rewrite the MBR?

How about booting with an XP rescue floppy or CD and running
the old standby; fdisk /mbr?? Live dangerously, eh?

HTH.

Signature · 7 lines
    Hal - in Terra Alta, WV/US - Slackware GNU/Linux 10.1   (2.4.29)
.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#2 lore raw
In reply to Tommi Tapani Piirainen
Quoted 8 lines · Tommi Tapani Piirainen

Hi,

I have slackware 10.1. I rewrote my ntfs partition with cfdisk and now I am unable to boot the partition (with windows xp). Can the problem be that i wrote the table with cfdisk or could it be some thing else. In additional there is two different ntfs partition is cfdisk both named same way. I used the first one can't remember the number (or was it 86, don't remember).

Quoted 10 lines

The reason for doing this was to include slackware to same disk. First I deleted ntfs partition and made it smaller. Motivation for doing this was mbr chrash due use of "System Mechanic 6" or at least I think so. I intalled lilo to mbr and it fixed the mbr problem. Booting problems can also have some thing to do with System Mechanic 6 altering my dll-files or some thing else.

The ntfs partition is first partition in the disk and I use lilo-bootloader. Can I fix the partition with ntfstools to be bootable?

Hi, Tommi Tapani Piirainen:

I bought a laptop with Windows XP and I repartitioned the hard drive with fdisk but I did not create any NTFS partitions. I used the recovery CDROM and restored the o/s to /dev/hda1. Then I installed Slackware 10.0.0 to the remaining hard drive portion.

/dev/hda1   NTFS   Windows XP home
/dev/hda2   swap
/dev/hda3   /            Slackware

"I rewrote my ntfs partition with cfdisk and now I am

unable to boot the partition (with windows xp)."

Yes, I would expect so. I expect that you will need to reinstall Windows.

I have no knowledge of "System Mechanic 6". :-|

HTH, Chuck

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#3 lore raw
In reply to Tommi Tapani Piirainen
Quoted 1 line

/dev/hda1 * 1 9605 77152131 86 NTFS volume set

;your problem may be the NTFS volume should be type 7 (HPFS/NTFS) instead of 86 or 87, which i believe is for dynamic disks (partitions spanning multiple disks).

;another issue may be that your /dev/hda1 is toggled as bootable, i don't know for certain. i thought that the bootable flag was just for linux, so is it possible that you toggled it on when you installed slackware, and linux has this as your /boot in /etc/fstab? or did you turn that flag on in cfdisk yourself?

;cRaig

Quoted 17 lines · Tommi Tapani Piirainen

Hi,

I have slackware 10.1. I rewrote my ntfs partition with cfdisk and now I am unable to boot the partition (with windows xp). Can the problem be that i wrote the table with cfdisk or could it be some thing else. In additional there is two different ntfs partition is cfdisk both named same way. I used the first one can't remember the number (or was it 86, don't remember).

The reason for doing this was to include slackware to same disk. First I deleted ntfs partition and made it smaller. Motivation for doing this was mbr chrash due use of "System Mechanic 6" or at least I think so. I intalled lilo to mbr and it fixed the mbr problem. Booting problems can also have some thing to do with System Mechanic 6 altering my dll-files or some thing else.

The ntfs partition is first partition in the disk and I use lilo-bootloader. Can I fix the partition with ntfstools to be bootable?

Quoted 8 lines

--
Tommi
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#4 lore raw

Hi,

Ok, thanks I will try type 7 after I back up my recent data.

I toggled hda1 bootable, so I will change this for my linux partition.

Thank you cRaig from your answer:) If none of these changes will solve my problem I will reinstall.

--
Tommi

Quoted 58 lines · On Tue, 14 Mar 2006 21:10:33 -0500 cRaig <[email protected]> wrote:
Quoted 1 line

/dev/hda1 * 1 9605 77152131 86 NTFS volume

set

;your problem may be the NTFS volume should be type 7 (HPFS/NTFS) instead of 86 or 87, which i believe is for dynamic disks (partitions spanning multiple disks).

;another issue may be that your /dev/hda1 is toggled as bootable, i don't know for certain. i thought that the bootable flag was just for linux, so is it possible that you toggled it on when you installed slackware, and linux has this as your /boot in /etc/fstab? or did you turn that flag on in cfdisk yourself?

;cRaig

Quoted 3 lines · Tommi Tapani Piirainen

Hi,

I have slackware 10.1. I rewrote my ntfs partition with cfdisk and

now I am

Quoted 1 line

unable to boot the partition (with windows xp). Can the problem be

that i wrote

Quoted 1 line

the table with cfdisk or could it be some thing else. In additional

there is two

Quoted 1 line

different ntfs partition is cfdisk both named same way. I used the

first one

Quoted 3 lines

can't remember the number (or was it 86, don't remember).

The reason for doing this was to include slackware to same disk.

First I deleted

Quoted 1 line

ntfs partition and made it smaller. Motivation for doing this was mbr

chrash due

Quoted 1 line

use of "System Mechanic 6" or at least I think so. I intalled lilo to

mbr and it

Quoted 1 line

fixed the mbr problem. Booting problems can also have some thing to

do with

Quoted 3 lines

System Mechanic 6 altering my dll-files or some thing else.

The ntfs partition is first partition in the disk and I use

lilo-bootloader. Can

Quoted 6 lines

I fix the partition with ntfstools to be bootable?

--
Tommi
-
To unsubscribe from this list: send the line "unsubscribe

linux-newbie" in

Quoted 4 lines

the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Signature · 12 lines
*********************
Tommi Piirainen
Lintukorventie 2 C 25
02660 ESPOO
+358 50 330 9143
[email protected]
**********************
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#5 lore raw
In reply to Tommi Tapani Piirainen
Quoted 16 lines · Tommi Tapani Piirainen

Hi,

I have slackware 10.1. I rewrote my ntfs partition with cfdisk and now I am unable to boot the partition (with windows xp). Can the problem be that i wrote the table with cfdisk or could it be some thing else. In additional there is two different ntfs partition is cfdisk both named same way. I used the first one can't remember the number (or was it 86, don't remember).

The reason for doing this was to include slackware to same disk. First I deleted ntfs partition and made it smaller. Motivation for doing this was mbr chrash due use of "System Mechanic 6" or at least I think so. I intalled lilo to mbr and it fixed the mbr problem. Booting problems can also have some thing to do with System Mechanic 6 altering my dll-files or some thing else.

Quoted 3 lines

The ntfs partition is first partition in the disk and I use lilo-bootloader. Can I fix the partition with ntfstools to be bootable?

Your best bet might be to use windows' fixmbr to repair the boot record then using a live linux cd repair lilo. Further, to access ntfs partitions in linux you should mount them as ntfs-3g.

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs