i2c: Drop the i2c-frodo bus driver
PATCH 27/36 i2c: Drop the i2c-frodo bus driver
Drop the i2c-frodo bus driver. It isn't referenced by the build system, and depends on code which was never included in 2.6 kernels.
Signed-off-by Jean Delvare <khali at linux-fr.org>
Signed-off-by Greg Kroah-Hartman <gregkh at suse.de>
---
drivers/i2c/busses/i2c-frodo.c | 85 ---------------------------------------- include/linux/i2c-id.h | 1 2 files changed, 0 insertions(+), 86 deletions(-) delete mode 100644 drivers/i2c/busses/i2c-frodo.c
2f27f46c49c096d86e7e63acd43cad3bc42f2383
drivers/i2c/busses/i2c-frodo.c deleted +0 -85
@@ -1,85 +0,0 @@ - -/* -* linux/drivers/i2c/i2c-frodo.c -* -* Author: Abraham van der Merwe <abraham at 2d3d.co.za> -* -* An I2C adapter driver for the 2d3D, Inc. StrongARM SA-1110 -* Development board (Frodo). -* -* This source code is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* version 2 as published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <asm/hardware.h> - - -static void frodo_setsda (void *data,int state) -{ -if (state) -FRODO_CPLD_I2C |=FRODO_I2C_SDA_OUT ; -else -FRODO_CPLD_I2C &= ~FRODO_I2C_SDA_OUT ; -} - -static void frodo_setscl (void *data,int state) -{ -if (state) -FRODO_CPLD_I2C |=FRODO_I2C_SCL_OUT ; -else -FRODO_CPLD_I2C &= ~FRODO_I2C_SCL_OUT ; -} - -static int frodo_getsda (void *data) -{ -return ((FRODO_CPLD_I2C &FRODO_I2C_SDA_IN ) !=0 ); -} - -static int frodo_getscl (void *data) -{ -return ((FRODO_CPLD_I2C &FRODO_I2C_SCL_IN ) !=0 ); -} - -static struct i2c_algo_bit_data bit_frodo_data = { - .setsda = frodo_setsda, - .setscl = frodo_setscl, - .getsda = frodo_getsda, - .getscl = frodo_getscl, - .udelay =80 , - .mdelay =80 , - .timeout =HZ -}; - -static struct i2c_adapter frodo_ops = { - .owner =THIS_MODULE , - .id =I2C_HW_B_FRODO , - .algo_data = &bit_frodo_data, - .dev = { - .name ="Frodo adapter driver" , - }, -}; - -static int __init i2c_frodo_init (void ) -{ -return i2c_bit_add_bus (&frodo_ops); -} - -static void __exit i2c_frodo_exit (void) -{ -i2c_bit_del_bus (&frodo_ops); -} - -MODULE_AUTHOR ("Abraham van der Merwe <abraham at 2d3d.co.za>" ); -MODULE_DESCRIPTION ("I2C-Bus adapter routines for Frodo" ); -MODULE_LICENSE ("GPL" ); - -module_init (i2c_frodo_init); -module_exit (i2c_frodo_exit); -
include/linux/i2c-id.h +0 -1
@@ -172,7 +172,6 @@#define I2C_HW_B_RIVA 0x010010/* Riva based graphics cards */ #define I2C_HW_B_IOC 0x010011/* IOC bit-wiggling */ #define I2C_HW_B_TSUNA 0x010012/* DEC Tsunami chipset */ -#define I2C_HW_B_FRODO 0x010013/* 2d3D SA-1110 Development Board */ #define I2C_HW_B_OMAHA 0x010014/* Omaha I2C interface (ARM) */ #define I2C_HW_B_GUIDE 0x010015/* Guide bit-basher */ #define I2C_HW_B_IXP2000 0x010016/* GPIO on IXP2000 systems */
Signature · 1 line
1.2.4