Update MTD NAND to Linux-2. [...]
PATCH 1/1 Update MTD NAND to Linux-2. [...]
Hello list,
inside the automatic U-Boot patch tracking system a new ticket [DNX#2006033142000696] was created:
<snip>
Quoted 94 lines
Generated against testing-NAND branch.
Signed-off-by Ladislav Michl <[email protected]>CHANGELOG:
* Update NAND code to be based on what is in Linux-2.6.14 Patch by Ladislav Michl, 3 Nov 2005diff -Naurw
a/include/linux/mtd/nand.hb/include/linux/mtd/nand.hinclude/linux/mtd/nand.h +1
-1@@ -5,7 +5,7 @@* Steven J. Hill <[email protected]> * Thomas Gleixner <[email protected]> * -* $Id: nand.h,v 1.68 2004/11/12 10:40:37 gleixner Exp $ +* $Id: nand.h,v 1.73 2005/05/31 19:39:17 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -48,12 +48,15 @@* 02-08-2004 tglx added option field to nand structure for chip anomalities
* 05-25-2004 tglx added bad block table support, ST-MICRO
manufacturer id
* update ofnand_chipstructure description
+ * 01-17-2005 dmarlin added extended commands for AG-AND device and
added option
+ * forBBT_AUTO_REFRESH.
+ * 01-20-2005 dmarlin added optional pointer to hardware specific
callback for
+ * extra error status checks.
*/
#ifndef__LINUX_MTD_NAND_H
#define__LINUX_MTD_NAND_H#include <
linux/mtd/compat.h>include/linux/mtd/nand.h +27
-1-#include <linux/mtd/mtd.h> struct mtd_info ;/* Scan and identify a NAND device */ @@ -113,6 +116,25 @@#define NAND_CMD_READSTART 0x30#define NAND_CMD_CACHEDPROG 0x15 +/* Extended commands for AG-AND device */ +/* +* Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but +* there is no way to distinguish that from NAND_CMD_READ0 +* until the remaining sequence of commands has been completed +* so add a high order bit and mask it off in the command. +*/ +#define NAND_CMD_DEPLETE1 0x100 +#define NAND_CMD_DEPLETE2 0x38 +#define NAND_CMD_STATUS_MULTI 0x71 +#define NAND_CMD_STATUS_ERROR 0x72 +/* multi-bank error status (banks 0-3) */ +#define NAND_CMD_STATUS_ERROR0 0x73 +#define NAND_CMD_STATUS_ERROR1 0x74 +#define NAND_CMD_STATUS_ERROR2 0x75 +#define NAND_CMD_STATUS_ERROR3 0x76 +#define NAND_CMD_STATUS_RESET 0x7f +#define NAND_CMD_STATUS_CLEAR 0xff +/* Status bits */ #define NAND_STATUS_FAIL 0x01#define NAND_STATUS_FAIL_N1 0x02@@ -149,6 +171,10 @@/* Enable Hardware ECC before syndrom is read back from flash */ #define NAND_ECC_READSYN 2 +/* Bit mask for flags passed to do_nand_read_ecc */ +#define NAND_GET_DEVICE 0x80 + +/* Option constants for bizarre disfunctionality and real * features */ @@ -168,6 +194,10 @@/* Chip has a array of 4 pages which can be read without * additional ready /busy waits */ #define NAND_4PAGE_ARRAY 0x00000040 +/* Chip requires that BBT is periodically rewritten to prevent +* bits from adjacent blocks from 'leaking' in altering data. +* This happens with the Renesas AG-AND chips, possibly others. */ +#define BBT_AUTO_REFRESH 0x00000080/* Options valid for Samsung large page devices */ #define NAND_SAMSUNG_LP_OPTIONS \@@ -190,7 +220,8 @@* This can only work if we have the ecc bytes directly behind the * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
#defineNAND_HWECC_SYNDROME0x00020000
include/linux/mtd/nand.h
Quoted 6 lines
include/linux/mtd/nand.h +2
-1- +/* This option skips the bbt scan during initialization. */ +#define NAND_SKIP_BBTSCAN 0x00040000/* Options set by nand scan */ /* Nand scan has allocated oob_buf */
</snip>
Your U-Boot support team