Skip to contentSkip to conversation

How to saveenv in SPI DataFlash?

U-Boot-Users Andrew Zhukov 2 participants 2 messages Apr 14, 2006

lore
Share & tools
lore
#0 lore raw

Hello everybody,

My target is at91rm9200dk with SPI DataFlash only (no Flash). I'd like to store environment vars in this SPI DataFlash. For Flash and Nand there are corresponding modules: common/env_flash.c|env_nand.c. But for Dataflash there is nothing... Should I create the module to store environment in at91rm9200dk SPI DataFlash?

Best regards
Andrew Zhukov

#1 lore raw

Hi Andrew Zhukov,

No.

In include/configs/at91rm9200dk.h

#define CFG_ENV_IS_IN_DATAFLASH

and things work automatically. You may need to tune

#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)

but for your case, I think no necessary.

Quoted 11 lines · Andrew Zhukov

Hello everybody,

My target is at91rm9200dk with SPI DataFlash only (no Flash). I'd like to store environment vars in this SPI DataFlash. For Flash and Nand there are corresponding modules: common/env_flash.c|env_nand.c. But for Dataflash there is nothing... Should I create the module to store environment in at91rm9200dk SPI DataFlash?

Best regards
Andrew Zhukov

Signature · 1 line
  lark