implement ata_link
PATCH 9/11 implement ata_link
Hellooo.
This is part of patchset series described in [T].
This is the first take of implement-ata_link patchset. This patchset contains 14 patches which can be categorized as follows.
#01 : prep
#02-03: implement ata_link
#04-06: make parts of libata deal with link instead of port #07-09: misc link stuff (link init, reset_tries, ata_link_abort()) #10-14: add ap->pm_link[] and update parts of libata to deal with
multiple links
ata_link abstracts PHY and sits between ata_port and ata_device. The following attributes are moved to ata_link from ata_port.
- active command state (active_tag, sactive)
- [hw_]sata_spd_limit
- eh_info and eh_context
- device array
With above and a few extra fields, a link can fully host attached devices including qc management and EH/hotplug. This patchset makes libata ready to handle PM links.
This patchset is against
upstream (acc696d93dcf993dec123d69d599979e1456ffec)
+ [1] prep-for-new-EH patchset
+ [2] new-EH-framework patchset, take 3
+ [3] new-EH-implementation patchset, take 3
+ [4] merge-irq-pio patchset
+ [5] add-NCQ-support patchset, take 3
+ [6] prep-for-hotplug support, take 2
+ [7] prep-LLDDs-for-hotplug-support, take 1
+ [8] add-hotplug-support, take 2
--
tejun
[T] http://article.gmane.org/gmane.linux.ide/9957
[1] http://article.gmane.org/gmane.linux.ide/9959
[2] http://article.gmane.org/gmane.linux.ide/9984
[3] http://article.gmane.org/gmane.linux.ide/9995
[4] http://article.gmane.org/gmane.linux.ide/10005
[5] http://article.gmane.org/gmane.linux.ide/10011
[6] http://article.gmane.org/gmane.linux.ide/10028
[7] http://article.gmane.org/gmane.linux.ide/10063
[8] http://article.gmane.org/gmane.linux.ide/10073
PATCH 1/14 libata-link: add PM related ATA constants
Add Port Multiplier related ATA constants and macros. Some of these will be used by ata_link implementation.
---
include/linux/ata.h | 29 +++++++++++++++++++++++++++++ 1 files changed, 29 insertions(+), 0 deletions(-)
51b532b3a54ccca372762a5f3cad55e65807df27
include/linux/ata.h +29 -0
@@ -154,6 +154,8 @@ enum {ATA_CMD_READ_NATIVE_MAX =0xF8 ,ATA_CMD_READ_NATIVE_MAX_EXT =0x27 ,ATA_CMD_READ_LOG_EXT =0x2f , +ATA_CMD_PM_READ =0xE4 , +ATA_CMD_PM_WRITE =0xE8 ,/* READ_LOG_EXT pages */ ATA_LOG_SATA_NCQ = 0x10,
@@ -187,6 +189,28 @@ enum {0=to device, 1=to host */ ATAPI_CDB_LEN =16 , +/* PM stuff */ +ATA_PM_MAX_PORTS =15 , +ATA_PM_CTRL_PORT =15 , + +ATA_PM_GSCR_DWORDS =128 , +ATA_PM_GSCR_PROD_ID =0 , +ATA_PM_GSCR_REV =1 , +ATA_PM_GSCR_PORT_INFO =2 , +ATA_PM_GSCR_ERROR =32 , +ATA_PM_GSCR_ERROR_EN =33 , +ATA_PM_GSCR_FEAT =64 , +ATA_PM_GSCR_FEAT_EN =96 , + +ATA_PM_PSCR_STATUS =0 , +ATA_PM_PSCR_ERROR =1 , +ATA_PM_PSCR_CONTROL =2 , + +ATA_PM_FEAT_BIST = (1 <<0 ), +ATA_PM_FEAT_PMREQ = (1 <<1 ), +ATA_PM_FEAT_DYNSSC = (1 <<2 ), +ATA_PM_FEAT_NOTIFY = (1 <<3 ), +/* cable types */ ATA_CBL_NONE =0 , ATA_CBL_PATA40 = 1,
@@ -363,4 +387,9 @@ static inline int lba_48_ok(u64 block, u return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= 65536); } +#define ata_pm_gscr_vendor (gscr) ((gscr)[ATA_PM_GSCR_PROD_ID] & 0xffff) +#define ata_pm_gscr_devid (gscr) ((gscr)[ATA_PM_GSCR_PROD_ID] >> 16) +#define ata_pm_gscr_rev (gscr) (((gscr)[ATA_PM_GSCR_REV] >> 8) & 0xff) +#define ata_pm_gscr_ports (gscr) ((gscr)[ATA_PM_GSCR_PORT_INFO] & 0xf) +#endif /* __LINUX_ATA_H__ */
Signature · 1 line
1.2.4
PATCH 2/14 libata-link: introduce ata_link
In reply to Tejun HeoIntroduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link.
Except for the host link, each link can be connected to at most one device and thus contains one struct ata_device. Slave device (PATA or emulated SATA) is a special case for the host link and is handled by struct ata_device storage __dev1 put right after the host link in struct ata_port.
This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port.
This patch introduces no behavior change.
---
drivers/scsi/ahci.c | 20 +++--- drivers/scsi/libata-bmdma.c | 4 + drivers/scsi/libata-core.c | 134 +++++++++++++++++++++++-------------------- drivers/scsi/libata-eh.c | 68 +++++++++++----------- drivers/scsi/libata-scsi.c | 20 +++--- drivers/scsi/pdc_adma.c | 4 + drivers/scsi/sata_mv.c | 6 +- drivers/scsi/sata_nv.c | 2 - drivers/scsi/sata_promise.c | 4 + drivers/scsi/sata_qstor.c | 4 + drivers/scsi/sata_sil.c | 4 + drivers/scsi/sata_sil24.c | 10 ++- drivers/scsi/sata_sx4.c | 4 + drivers/scsi/sata_vsc.c | 2 - include/linux/libata.h | 40 ++++++++----- 15 files changed, 174 insertions(+), 152 deletions(-)
14834a330b2a065a120bc776be561f3be32831c1
drivers/scsi/ahci.c +10 -10
@@ -617,7 +617,7 @@ static int ahci_softreset(struct ata_por/* restart engine */ ahci_start_engine (ap); -ata_tf_init (ap->device, &tf); +ata_tf_init (ap->link.device, &tf); fis = pp->cmd_tbl;/* issue the first D2H Register FIS */
@@ -709,7 +709,7 @@ static void ahci_postreset(struct ata_po/* clear stored SError */ spin_lock_irqsave (&ap->host_set->lock, flags); - ap->eh_info.serror =0 ; + ap->link.eh_info.serror =0 ;spin_unlock_irqrestore (&ap->host_set->lock, flags);/* Make sure port's ATAPI bit is set appropriately */
@@ -807,7 +807,7 @@ static void ahci_qc_prep(struct ata_queustatic void ahci_error_intr (struct ata_port *ap,u32 irq_stat) {struct ahci_port_priv *pp = ap->private_data; -struct ata_eh_info *ehi = &ap->eh_info; +struct ata_eh_info *ehi = &ap->link.eh_info;unsigned int err_mask =0 , action =0 ;struct ata_queued_cmd *qc;u32 serror;
@@ -855,7 +855,7 @@ static void ahci_error_intr(struct ata_p ehi->serror |= serror; ehi->action |= action; - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);if (qc) qc->err_mask |= err_mask;else
@@ -871,7 +871,7 @@ static void ahci_host_intr(struct ata_po {void __iomem *mmio = ap->host_set->mmio_base;void __iomem *port_mmio =ahci_port_base (mmio, ap->port_no); -struct ata_eh_info *ehi = &ap->eh_info; +struct ata_eh_info *ehi = &ap->link.eh_info;u32 status, serror, qc_active;int rc;
@@ -897,7 +897,7 @@ static void ahci_host_intr(struct ata_poreturn ; } -if (ap->sactive) +if (ap->link.sactive) qc_active =readl (port_mmio +PORT_SCR_ACT );else qc_active =readl (port_mmio +PORT_CMD_ISSUE );
@@ -915,13 +915,13 @@ static void ahci_host_intr(struct ata_po/* hmmm... a spurious interupt */ /* some devices send D2H reg with I bit set during NCQ command phase */ -if (ap->sactive && status &PORT_IRQ_D2H_REG_FIS ) +if (ap->link.sactive && status &PORT_IRQ_D2H_REG_FIS )return ;/* ignore interim PIO setup fis interrupts */ -if (ata_tag_valid (ap->active_tag)) { +if (ata_tag_valid (ap->link.active_tag)) {struct ata_queued_cmd *qc = -ata_qc_from_tag (ap, ap->active_tag); +ata_qc_from_tag (ap, ap->link.active_tag);if (qc && qc->tf.protocol ==ATA_PROT_PIO && (status &PORT_IRQ_PIOS_FIS ))
@@ -931,7 +931,7 @@ static void ahci_host_intr(struct ata_poif (ata_ratelimit ())ata_port_printk (ap,KERN_INFO ,"spurious interrupt " "(irq_stat 0x%x active_tag %d sactive 0x%x)\n" , - status, ap->active_tag, ap->sactive); + status, ap->link.active_tag, ap->link.sactive); }static void ahci_irq_clear (struct ata_port *ap)
drivers/scsi/libata-bmdma.c +2 -2
@@ -716,12 +716,12 @@ void ata_bmdma_drive_eh(struct ata_port ata_postreset_fn_t postreset) {struct ata_host_set *host_set = ap->host_set; -struct ata_eh_context *ehc = &ap->eh_context; +struct ata_eh_context *ehc = &ap->link.eh_context;struct ata_queued_cmd *qc;unsigned long flags;int thaw =0 ; - qc =__ata_qc_from_tag (ap, ap->active_tag); + qc =__ata_qc_from_tag (ap, ap->link.active_tag);if (qc && !(qc->flags &ATA_QCFLAG_FAILED )) qc =NULL ;
drivers/scsi/libata-core.c +72 -62
413 lines not on this page · raw message
drivers/scsi/libata-eh.c +34 -34
242 lines not on this page · raw message
drivers/scsi/libata-scsi.c +10 -10
@@ -1356,16 +1356,16 @@ static void ata_scsi_qc_complete(struct*/ static int ata_scmd_need_defer (struct ata_device *dev,int is_io) { -struct ata_port *ap = dev->ap; +struct ata_link *link = dev->link;if (!(dev->flags &ATA_DFLAG_NCQ ))return 0 ;if (is_io) { -if (!ata_tag_valid (ap->active_tag)) +if (!ata_tag_valid (link->active_tag))return 0 ; }else { -if (!ata_tag_valid (ap->active_tag) && !ap->sactive) +if (!ata_tag_valid (link->active_tag) && !link->sactive)return 0 ; }return 1 ;
@@ -2348,7 +2348,7 @@ static unsigned int atapi_xlat(struct atstatic struct ata_device *ata_find_dev (struct ata_port *ap,int id) {if (likely (id ==0 || (id ==1 && ap->flags &ATA_FLAG_SLAVE_POSS ))) -return &ap->device[id]; +return &ap->link.device[id];return NULL ; }
@@ -2781,7 +2781,7 @@ void ata_scsi_scan_host(struct ata_portreturn ;for (i =0 ; i <ATA_MAX_DEVICES ; i++) { -struct ata_device *dev = &ap->device[i]; +struct ata_device *dev = &ap->link.device[i];struct scsi_device *sdev;if (!ata_dev_enabled (dev) || dev->sdev)
@@ -2831,7 +2831,7 @@ int ata_scsi_offline_dev(struct ata_devi*/ void ata_scsi_remove_dev (struct ata_device *dev) { -struct ata_port *ap = dev->ap; +struct ata_port *ap = dev->link->ap;struct scsi_device *sdev;unsigned long flags;
@@ -2911,14 +2911,14 @@ static int ata_scsi_user_scan(struct Scsspin_lock_irqsave (&ap->host_set->lock, flags);if (id ==SCAN_WILD_CARD ) { - ap->eh_info.probe_mask |= (1 <<ATA_MAX_DEVICES ) -1 ; - ap->eh_info.action |=ATA_EH_SOFTRESET ; + ap->link.eh_info.probe_mask |= (1 <<ATA_MAX_DEVICES ) -1 ; + ap->link.eh_info.action |=ATA_EH_SOFTRESET ; }else {struct ata_device *dev =ata_find_dev (ap, id);if (dev) { - ap->eh_info.probe_mask |=1 << dev->devno; - ap->eh_info.action |=ATA_EH_SOFTRESET ; + ap->link.eh_info.probe_mask |=1 << dev->devno; + ap->link.eh_info.action |=ATA_EH_SOFTRESET ; }else rc = -EINVAL ; }
drivers/scsi/pdc_adma.c +2 -2
@@ -461,7 +461,7 @@ static inline unsigned int adma_intr_pkt pp = ap->private_data;if (!pp || pp->state != adma_state_pkt)continue ; - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);if (qc && (!(qc->tf.flags &ATA_TFLAG_POLLING ))) {if ((status & (aPERR | aPSD | aUIRQ))) qc->err_mask |=AC_ERR_OTHER ;
@@ -486,7 +486,7 @@ static inline unsigned int adma_intr_mmistruct adma_port_priv *pp = ap->private_data;if (!pp || pp->state != adma_state_mmio)continue ; - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);if (qc && (!(qc->tf.flags &ATA_TFLAG_POLLING ))) {/* check main status, clearing INTRQ */
drivers/scsi/sata_mv.c +3 -3
@@ -1413,7 +1413,7 @@ static void mv_host_intr(struct ata_host }if (handled) { - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);if (qc && (qc->flags &ATA_QCFLAG_ACTIVE )) {VPRINTK ("port %u IRQ found for qc, " "ata_status 0x%x\n" , port,ata_status);
@@ -1922,7 +1922,7 @@ static void __mv_phy_reset(struct ata_postruct mv_host_priv *hpriv = ap->host_set->private_data;void __iomem *port_mmio =mv_ap_base (ap);struct ata_taskfile tf; -struct ata_device *dev = &ap->device[0 ]; +struct ata_device *dev = &ap->link.device[0 ];unsigned long timeout;int retry =5 ;u32 sstatus;
@@ -2029,7 +2029,7 @@ static void mv_eng_timeout(struct ata_pomv_dump_all_regs (ap->host_set->mmio_base, ap->port_no,to_pci_dev (ap->host_set->dev)); - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);printk (KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n" , ap->host_set->mmio_base, ap, qc, qc->scsicmd, &qc->scsicmd->cmnd);
drivers/scsi/sata_nv.c +1 -1
@@ -283,7 +283,7 @@ static irqreturn_t nv_interrupt (int irq !(ap->flags & ATA_FLAG_DISABLED)) {struct ata_queued_cmd *qc; - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);if (qc && (!(qc->tf.flags &ATA_TFLAG_POLLING ))) handled +=ata_host_intr (ap, qc);else
drivers/scsi/sata_promise.c +2 -2
@@ -432,7 +432,7 @@ static void pdc_eng_timeout(struct ata_pspin_lock_irqsave (&host_set->lock, flags); - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);switch (qc->tf.protocol) {case ATA_PROT_DMA :
@@ -539,7 +539,7 @@ static irqreturn_t pdc_interrupt (int ir !(ap->flags & ATA_FLAG_DISABLED)) {struct ata_queued_cmd *qc; - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);if (qc && (!(qc->tf.flags &ATA_TFLAG_POLLING ))) handled +=pdc_host_intr (ap, qc); }
drivers/scsi/sata_qstor.c +2 -2
@@ -400,7 +400,7 @@ static inline unsigned int qs_intr_pkt(sstruct qs_port_priv *pp = ap->private_data;if (!pp || pp->state != qs_state_pkt)continue ; - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);if (qc && (!(qc->tf.flags &ATA_TFLAG_POLLING ))) {switch (sHST) {case 0 :/* successful CPB */
@@ -433,7 +433,7 @@ static inline unsigned int qs_intr_mmio(struct qs_port_priv *pp = ap->private_data;if (!pp || pp->state != qs_state_mmio)continue ; - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);if (qc && (!(qc->tf.flags &ATA_TFLAG_POLLING ))) {/* check main status, clearing INTRQ */
drivers/scsi/sata_sil.c +2 -2
@@ -285,7 +285,7 @@ static void sil_post_set_mode (struct atunsigned int i;for (i =0 ; i <2 ; i++) { - dev = &ap->device[i]; + dev = &ap->link.device[i];if (!ata_dev_enabled (dev)) dev_mode[i] =0 ;/* PIO0/1/2 */ else if (dev->flags &ATA_DFLAG_PIO )
@@ -339,7 +339,7 @@ static void sil_scr_write (struct ata_postatic void sil_host_intr (struct ata_port *ap,u32 bmdma2) { -struct ata_queued_cmd *qc =ata_qc_from_tag (ap, ap->active_tag); +struct ata_queued_cmd *qc =ata_qc_from_tag (ap, ap->link.active_tag);u8 status;if (unlikely (bmdma2 &SIL_DMA_SATA_IRQ || !qc || qc->tf.ctl &ATA_NIEN ))
drivers/scsi/sata_sil24.c +5 -5
@@ -735,7 +735,7 @@ static void sil24_thaw(struct ata_port *static void sil24_error_intr (struct ata_port *ap) {void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr; -struct ata_eh_info *ehi = &ap->eh_info; +struct ata_eh_info *ehi = &ap->link.eh_info;int freeze =0 ;u32 irq_stat;
@@ -794,7 +794,7 @@ static void sil24_error_intr(struct ata_ }/* record error info */ - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);if (qc) {sil24_read_tf (ap,sil24_tag (qc->tag), &qc->result_tf); qc->err_mask |= err_mask;
@@ -838,7 +838,7 @@ static inline void sil24_host_intr(strucif (rc >0 )return ;if (rc <0 ) { -struct ata_eh_info *ehi = &ap->eh_info; +struct ata_eh_info *ehi = &ap->link.eh_info; ehi->err_mask |=AC_ERR_HSM ; ehi->action |=ATA_EH_SOFTRESET ;ata_port_freeze (ap);
@@ -848,7 +848,7 @@ static inline void sil24_host_intr(strucif (ata_ratelimit ())ata_port_printk (ap,KERN_INFO ,"spurious interrupt " "(slot_stat 0x%x active_tag %d sactive 0x%x)\n" , - slot_stat, ap->active_tag, ap->sactive); + slot_stat, ap->link.active_tag, ap->link.sactive); }static irqreturn_t sil24_interrupt (int irq,void *dev_instance,struct pt_regs *regs)
@@ -890,7 +890,7 @@ static irqreturn_t sil24_interrupt(int istatic void sil24_error_handler (struct ata_port *ap) { -struct ata_eh_context *ehc = &ap->eh_context; +struct ata_eh_context *ehc = &ap->link.eh_context;if (sil24_init_port (ap)) {ata_eh_freeze_port (ap);
drivers/scsi/sata_sx4.c +2 -2
@@ -837,7 +837,7 @@ static irqreturn_t pdc20621_interrupt (i !(ap->flags & ATA_FLAG_DISABLED)) {struct ata_queued_cmd *qc; - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);if (qc && (!(qc->tf.flags &ATA_TFLAG_POLLING ))) handled +=pdc20621_host_intr (ap, qc, (i >4 ), mmio_base);
@@ -864,7 +864,7 @@ static void pdc_eng_timeout(struct ata_pspin_lock_irqsave (&host_set->lock, flags); - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);switch (qc->tf.protocol) {case ATA_PROT_DMA :
drivers/scsi/sata_vsc.c +1 -1
@@ -232,7 +232,7 @@ static irqreturn_t vsc_sata_interrupt (iif (ap && !(ap->flags &ATA_FLAG_DISABLED )) {struct ata_queued_cmd *qc; - qc =ata_qc_from_tag (ap, ap->active_tag); + qc =ata_qc_from_tag (ap, ap->link.active_tag);if (qc && (!(qc->tf.flags &ATA_TFLAG_POLLING ))) handled +=ata_host_intr (ap, qc);else if (is_vsc_sata_int_err (i, int_status)) {
include/linux/libata.h +26 -14
@@ -417,7 +417,7 @@ struct ata_ering {struct ata_ering_entry name_entries[size];struct ata_device { -struct ata_port *ap; +struct ata_link *link;unsigned int devno;/* 0 or 1 */ unsigned long flags;/* ATA_DFLAG_xxx */ struct scsi_device *sdev;/* attached SCSI device */
@@ -468,6 +468,24 @@ struct ata_eh_context {unsigned int did_probe_mask; }; +struct ata_link { +struct ata_port *ap; + +unsigned int active_tag;/* active tag on this link */ +u32 sactive;/* active NCQ commands */ + +unsigned int flags;/* ATA_LFLAG_* */ +unsigned int hw_sata_spd_limit; +unsigned int sata_spd_limit; + +/* record runtime error info, protected by host_set lock */ +struct ata_eh_info eh_info; +/* EH context */ +struct ata_eh_context eh_context; + +struct ata_device device[1 ]; +}; +struct ata_port {struct Scsi_Host *host;/* our co-allocated scsi host */ const struct ata_port_operations *ops;
@@ -490,22 +508,13 @@ struct ata_port {unsigned int mwdma_mask;unsigned int udma_mask;unsigned int cbl;/* cable type; ATA_CBL_xxx */ -unsigned int hw_sata_spd_limit; -unsigned int sata_spd_limit;/* SATA PHY speed limit */ - -/* record runtime error info, protected by host_set lock */ -struct ata_eh_info eh_info; -/* EH context owned by EH */ -struct ata_eh_context eh_context; - -struct ata_device device[ATA_MAX_DEVICES ];struct ata_queued_cmd qcmd[ATA_MAX_QUEUE ];unsigned long qc_allocated;unsigned int qc_active; -unsigned int active_tag; -u32 sactive; +struct ata_link link;/* host default link */ +struct ata_device __dev1;/* storage for link.device[1] */ struct ata_host_stats stats;struct ata_host_set *host_set;
@@ -782,8 +791,11 @@ extern void ata_do_eh(struct ata_port *a #define ata_port_printk(ap, lv, fmt, args...) \ printk(lv"ata%u: "fmt, (ap)->id , ##args) +#define ata_link_printk(link, lv, fmt, args...) \ + printk(lv"ata%u: "fmt, (link)->ap->id , ##args) + #define ata_dev_printk(dev, lv, fmt, args...) \ - printk(lv"ata%u.%02u: "fmt, (dev)->ap->id, (dev)->devno , ##args) + printk(lv"ata%u.%02u: "fmt, (dev)->link->ap->id, (dev)->devno , ##args)/* * ata_eh_info helpers
@@ -984,7 +996,7 @@ static inline void ata_tf_init(struct at {memset (tf,0 ,sizeof (*tf)); - tf->ctl = dev->ap->ctl; + tf->ctl = dev->link->ap->ctl;if (dev->devno ==0 ) tf->device =ATA_DEVICE_OBS ;else
Signature · 1 line
1.2.4
PATCH 4/14 libata-link: linkify PHY-related functions
In reply to Tejun HeoMake the following PHY-related functions to deal with ata_link instead of ata_port.
* sata_print_link_status()
* ata_down_sata_spd_limit()
* ata_set_sata_spd_limit() and friends
* sata_link_debounce/resume()
* ata_scr_valid/read/write/write_flush()
* ata_link_on/offline()
This patch introduces no behavior change.
---
drivers/scsi/ahci.c | 6 + drivers/scsi/libata-bmdma.c | 2 drivers/scsi/libata-core.c | 217 +++++++++++++++++++++++-------------------- drivers/scsi/libata-eh.c | 22 ++-- drivers/scsi/libata.h | 4 - drivers/scsi/sata_mv.c | 14 +-- drivers/scsi/sata_sil24.c | 12 +- include/linux/libata.h | 23 ++--- 8 files changed, 157 insertions(+), 143 deletions(-)
e99ffedfb16c0fae395568f367561a930118e4d1
drivers/scsi/ahci.c +3 -3
@@ -587,7 +587,7 @@ static int ahci_softreset(struct ata_porDPRINTK ("ENTER\n" ); -if (ata_port_offline (ap)) { +if (ata_link_offline (&ap->link)) {DPRINTK ("PHY reports no device\n" ); *class =ATA_DEV_NONE ;return 0 ;
@@ -661,7 +661,7 @@ static int ahci_softreset(struct ata_pormsleep (150 ); *class =ATA_DEV_NONE ; -if (ata_port_online (ap)) { +if (ata_link_online (&ap->link)) {if (ata_busy_sleep (ap,ATA_TMOUT_BOOT_QUICK ,ATA_TMOUT_BOOT )) { rc = -EIO ; reason ="device not ready" ;
@@ -690,7 +690,7 @@ static int ahci_hardreset(struct ata_por rc =sata_std_hardreset (ap, class);ahci_start_engine (ap); -if (rc ==0 &&ata_port_online (ap)) +if (rc ==0 &&ata_link_online (&ap->link)) *class =ahci_dev_classify (ap);if (*class ==ATA_DEV_UNKNOWN ) *class =ATA_DEV_NONE ;
drivers/scsi/libata-bmdma.c +1 -1
@@ -778,7 +778,7 @@ void ata_bmdma_error_handler(struct ata_ata_reset_fn_t hardreset; hardreset =NULL ; -if (ata_scr_valid (ap)) +if (ata_scr_valid (&ap->link)) hardreset = sata_std_hardreset; ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
drivers/scsi/libata-core.c +114 -103
579 lines not on this page · raw message
drivers/scsi/libata-eh.c +12 -10
@@ -1154,7 +1154,7 @@ static int ata_eh_speed_down(struct ata_return 0 ;/* speed down SATA link speed if possible */ -if (ata_down_sata_spd_limit (dev->link->ap) ==0 ) +if (ata_down_sata_spd_limit (dev->link) ==0 )return ATA_EH_HARDRESET ;/* lower transfer mode */
@@ -1179,7 +1179,8 @@ static int ata_eh_speed_down(struct ata_*/ static void ata_eh_autopsy (struct ata_port *ap) { -struct ata_eh_context *ehc = &ap->link.eh_context; +struct ata_link *link = &ap->link; +struct ata_eh_context *ehc = &link->eh_context;unsigned int action = ehc->i.action;struct ata_device *failed_dev =NULL ;unsigned int all_err_mask =0 ;
@@ -1190,7 +1191,7 @@ static void ata_eh_autopsy(struct ata_poDPRINTK ("ENTER\n" );/* obtain and analyze SError */ - rc =ata_scr_read (ap,SCR_ERROR , &serror); + rc =ata_scr_read (link,SCR_ERROR , &serror);if (rc ==0 ) { ehc->i.serror |= serror;ata_eh_analyze_serror (ap);
@@ -1368,7 +1369,8 @@ static int ata_eh_reset(struct ata_port ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { - struct ata_eh_context *ehc = &ap->link.eh_context; + struct ata_link *link = &ap->link; +struct ata_eh_context *ehc = &link->eh_context;unsigned int *classes = ehc->classes;int tries =ATA_EH_RESET_TRIES ;int verbose = !(ap->flags &ATA_FLAG_LOADING );
@@ -1382,7 +1384,7 @@ static int ata_eh_reset(struct ata_port*/ action = ehc->i.action; ehc->i.action &= ~ATA_EH_RESET_MASK ; -if (softreset && (!hardreset || (!ata_set_sata_spd_needed (ap) && +if (softreset && (!hardreset || (!ata_set_sata_spd_needed (link) && !(action &ATA_EH_HARDRESET )))) { ehc->i.action |=ATA_EH_SOFTRESET ; reset = softreset;
@@ -1399,7 +1401,7 @@ static int ata_eh_reset(struct ata_port*/ if (rc == -ENODEV ) {struct ata_device *dev; -ata_link_for_each_dev (dev, &ap->link) +ata_link_for_each_dev (dev, link) classes[dev->devno] =ATA_DEV_NONE ;return 0 ; }
@@ -1464,7 +1466,7 @@ static int ata_eh_reset(struct ata_portssleep (5 );if (reset == hardreset) -ata_down_sata_spd_limit (ap); +ata_down_sata_spd_limit (link);if (hardreset) reset = hardreset; goto retry;
@@ -1496,7 +1498,7 @@ static int ata_eh_revalidate_and_attach(ata_link_for_each_dev (dev, &ap->link) {if (ehc->i.action &ATA_EH_REVALIDATE &&ata_dev_enabled (dev) && (!ehc->i.dev || ehc->i.dev == dev)) { -if (ata_port_offline (ap)) { +if (ata_link_offline (dev->link)) { rc = -EIO ;break ; }
@@ -1675,7 +1677,7 @@ static int ata_eh_recover(struct ata_por ehc->tries[dev->devno] =0 ;break ;case -EIO : -ata_down_sata_spd_limit (ap); +ata_down_sata_spd_limit (&ap->link);default : ehc->tries[dev->devno]--; if (down_xfermask &&
@@ -1688,7 +1690,7 @@ static int ata_eh_recover(struct ata_porata_dev_disable (dev);/* detach if offline */ -if (ata_port_offline (ap)) +if (ata_link_offline (&ap->link))ata_eh_detach_dev (dev);/* probe if requested */
drivers/scsi/libata.h +2 -2
@@ -53,8 +53,8 @@ extern unsigned ata_exec_internal(structextern int ata_dev_read_id (struct ata_device *dev,unsigned int *p_class,int post_reset,u16 *id);extern int ata_dev_configure (struct ata_device *dev,int print_info); -extern int ata_down_sata_spd_limit (struct ata_port *ap); -extern int ata_set_sata_spd_needed (struct ata_port *ap); +extern int ata_down_sata_spd_limit (struct ata_link *link); +extern int ata_set_sata_spd_needed (struct ata_link *link);extern int ata_down_xfermask_limit (struct ata_device *dev,int force_pio0);extern int ata_set_mode (struct ata_port *ap,struct ata_device **r_failed_dev);extern void ata_qc_free (struct ata_queued_cmd *qc);
drivers/scsi/sata_mv.c +7 -7
@@ -1310,8 +1310,8 @@ static void mv_err_intr(struct ata_port edma_err_cause =readl (port_mmio +EDMA_ERR_IRQ_CAUSE_OFS );if (EDMA_ERR_SERR & edma_err_cause) { -ata_scr_read (ap,SCR_ERROR , &serr); -ata_scr_write_flush (ap,SCR_ERROR , serr); +ata_scr_read (&ap->link,SCR_ERROR , &serr); +ata_scr_write_flush (&ap->link,SCR_ERROR , serr); }if (EDMA_ERR_SELF_DIS & edma_err_cause) {struct mv_port_priv *pp = ap->private_data;
@@ -1935,15 +1935,15 @@ static void __mv_phy_reset(struct ata_po/* Issue COMRESET via SControl */ comreset_retry: -ata_scr_write_flush (ap,SCR_CONTROL ,0x301 ); +ata_scr_write_flush (&ap->link,SCR_CONTROL ,0x301 );__msleep (1 , can_sleep); -ata_scr_write_flush (ap,SCR_CONTROL ,0x300 ); +ata_scr_write_flush (&ap->link,SCR_CONTROL ,0x300 );__msleep (20 , can_sleep); timeout = jiffies +msecs_to_jiffies (200 ); do { - ata_scr_read(ap, SCR_STATUS, &sstatus); + ata_scr_read(&ap->link, SCR_STATUS, &sstatus); sstatus &= 0x3; if ((sstatus == 3) || (sstatus == 0)) break;
@@ -1961,10 +1961,10 @@ comreset_retry:"SCtrl 0x%08x\n" ,mv_scr_read (ap,SCR_STATUS ), mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); -if (ata_port_online (ap)) { +if (ata_link_online (&ap->link)) {ata_port_probe (ap); }else { -ata_scr_read (ap,SCR_STATUS , &sstatus); +ata_scr_read (&ap->link,SCR_STATUS , &sstatus);ata_port_printk (ap,KERN_INFO ,"no device found (phy stat %08x)\n" , sstatus);ata_port_disable (ap);
drivers/scsi/sata_sil24.c +6 -6
@@ -521,7 +521,7 @@ static int sil24_softreset(struct ata_poDPRINTK ("ENTER\n" ); -if (ata_port_offline (ap)) { +if (ata_link_offline (&ap->link)) {DPRINTK ("PHY reports no device\n" ); *class =ATA_DEV_NONE ; goto out;
@@ -578,10 +578,10 @@ static int sil24_hardreset(struct ata_pou32 tmp;/* sil24 does the right thing(tm) without any protection */ -ata_set_sata_spd (ap); +ata_set_sata_spd (&ap->link); tout_msec =100 ; -if (ata_port_online (ap)) +if (ata_link_online (&ap->link)) tout_msec =5000 ;writel (PORT_CS_DEV_RST , port +PORT_CTRL_STAT );
@@ -591,15 +591,15 @@ static int sil24_hardreset(struct ata_po/* SStatus oscillates between zero and valid status after * DEV_RST, debounce it. */ - rc =sata_phy_debounce (ap,ATA_DEBOUNCE_INTERVAL , -ATA_DEBOUNCE_DURATION ,ATA_DEBOUNCE_TIMEOUT ); + rc =sata_link_debounce (&ap->link,ATA_DEBOUNCE_INTERVAL , +ATA_DEBOUNCE_DURATION ,ATA_DEBOUNCE_TIMEOUT );if (rc) { reason ="PHY debouncing failed" ; goto err; }if (tmp &PORT_CS_DEV_RST ) { -if (ata_port_offline (ap)) +if (ata_link_offline (&ap->link))return 0 ; reason ="link not ready" ; goto err;
include/linux/libata.h +12 -11
@@ -616,11 +616,12 @@ extern void ata_port_probe(struct ata_poextern void __sata_phy_reset (struct ata_port *ap);extern void sata_phy_reset (struct ata_port *ap);extern void ata_bus_reset (struct ata_port *ap); -extern int ata_set_sata_spd (struct ata_port *ap); -extern int sata_phy_debounce (struct ata_port *ap,unsigned long interval_msec, -unsigned long duration_msec, -unsigned long timeout_msec); -extern int sata_phy_resume (struct ata_port *ap,int quick); +extern int ata_set_sata_spd (struct ata_link *link); +extern int sata_link_debounce (struct ata_link *link, +unsigned long interval_msec, +unsigned long duration_msec, +unsigned long timeout_msec); +extern int sata_link_resume (struct ata_link *link,int quick);extern int ata_std_prereset (struct ata_port *ap);extern int ata_std_softreset (struct ata_port *ap,unsigned int *classes);extern int sata_std_hardreset (struct ata_port *ap,unsigned int *class);
@@ -644,12 +645,12 @@ extern int ata_scsi_ioctl(struct scsi_deextern int ata_scsi_queuecmd (struct scsi_cmnd *cmd,void (*done)(struct scsi_cmnd *));extern int ata_scsi_release (struct Scsi_Host *host);extern unsigned int ata_host_intr (struct ata_port *ap,struct ata_queued_cmd *qc); -extern int ata_scr_valid (struct ata_port *ap); -extern int ata_scr_read (struct ata_port *ap,int reg,u32 *val); -extern int ata_scr_write (struct ata_port *ap,int reg,u32 val); -extern int ata_scr_write_flush (struct ata_port *ap,int reg,u32 val); -extern int ata_port_online (struct ata_port *ap); -extern int ata_port_offline (struct ata_port *ap); +extern int ata_scr_valid (struct ata_link *link); +extern int ata_scr_read (struct ata_link *link,int reg,u32 *val); +extern int ata_scr_write (struct ata_link *link,int reg,u32 val); +extern int ata_scr_write_flush (struct ata_link *link,int reg,u32 val); +extern int ata_link_online (struct ata_link *link); +extern int ata_link_offline (struct ata_link *link);extern int ata_scsi_device_resume (struct scsi_device *);extern int ata_scsi_device_suspend (struct scsi_device *,pm_message_t state);extern int ata_device_resume (struct ata_device *);
Signature · 1 line
1.2.4
PATCH 8/14 libata-link: implement link->reset_tries
In reply to Tejun HeoMake reset_tries per-link property. PM links will use different value from host links.
---
drivers/scsi/libata-core.c | 1 + drivers/scsi/libata-eh.c | 2 +- include/linux/libata.h | 2 ++ 3 files changed, 4 insertions(+), 1 deletions(-)
c7399562f682d7f2684a5f8fa95fc74583907031
drivers/scsi/libata-core.c +1 -0
@@ -5116,6 +5116,7 @@ static void ata_link_init(struct ata_por link->pmp = pmp; link->active_tag =ATA_TAG_POISON ; link->hw_sata_spd_limit =UINT_MAX ; + link->reset_tries =ATA_EH_RESET_TRIES ;ata_link_for_each_dev (dev, link) { dev->link = link;
drivers/scsi/libata-eh.c +1 -1
@@ -1375,7 +1375,7 @@ static int ata_eh_reset(struct ata_link {struct ata_eh_context *ehc = &link->eh_context;unsigned int *classes = ehc->classes; -int tries =ATA_EH_RESET_TRIES ; +int tries = link->reset_tries;int verbose = !(link->ap->flags &ATA_FLAG_LOADING );unsigned int action;ata_reset_fn_t reset;
include/linux/libata.h +2 -0
@@ -479,6 +479,8 @@ struct ata_link {unsigned int hw_sata_spd_limit;unsigned int sata_spd_limit; +int reset_tries; +/* record runtime error info, protected by host_set lock */ struct ata_eh_info eh_info;/* EH context */
Signature · 1 line
1.2.4
PATCH 12/14 libata-link: update ata_dev_configure() to deal with PM links
In reply to Tejun HeoUpdate ata_dev_configure() to deal with PM links.
---
drivers/scsi/libata-core.c | 13 ++++++++----- 1 files changed, 8 insertions(+), 5 deletions(-)
17a1cd83a17e3c44a2732ff2e77320f79b8565cd
drivers/scsi/libata-core.c +8 -5
@@ -1314,7 +1314,7 @@ int ata_dev_configure(struct ata_device {struct ata_port *ap = dev->link->ap;const u16 *id = dev->id; -struct ata_device *tdev; +struct ata_link *tlink;unsigned int xfer_mask;int rc;
@@ -1437,10 +1437,13 @@ int ata_dev_configure(struct ata_device } ap->host->max_cmd_len =0 ; -ata_link_for_each_dev (tdev, dev->link) { - ap->host->max_cmd_len = max_t(unsigned int, - ap->host->max_cmd_len, - tdev->cdb_len); +ata_port_for_each_link (tlink, ap) { +struct ata_device *tdev; +ata_link_for_each_dev (tdev, tlink) { + ap->host->max_cmd_len = max_t(unsigned int, + ap->host->max_cmd_len, + tdev->cdb_len); + } }/* limit bridge transfers to udma5, 200 sectors */
Signature · 1 line
1.2.4
PATCH 6/14 libata-link: linkify config/EH related functions
In reply to Tejun HeoMake the following functions deal with ata_link instead of ata_port.
* ata_set_mode()
* ata_eh_analyze_ncq_error()
* ata_eh_analyze_serror()
* ata_eh_autopsy()
* ata_eh_report()
* ata_eh_attach_and_revalidate()
---
drivers/scsi/libata-core.c | 13 +++-- drivers/scsi/libata-eh.c | 113 +++++++++++++++++++++++--------------------- drivers/scsi/libata.h | 3 + 3 files changed, 68 insertions(+), 61 deletions(-)
222e799fb2ba9ac4c8e0437d5418d6a89fa515b9
drivers/scsi/libata-core.c +7 -6
@@ -1525,7 +1525,7 @@ static int ata_bus_probe(struct ata_port }/* configure transfer mode */ - rc =ata_set_mode (ap, &dev); + rc =ata_set_mode (&ap->link, &dev);if (rc) { down_xfermask =1 ; goto fail;
@@ -2062,7 +2062,7 @@ static int ata_dev_set_mode(struct ata_d/** * ata_set_mode - Program timings and issue SET FEATURES - XFER -* @ap: port on which timings will be programmed +* @link: link on which timings will be programmed * @r_failed_dev: out paramter for failed device * * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
@@ -2075,9 +2075,9 @@ static int ata_dev_set_mode(struct ata_d* RETURNS: * 0 on success, negative errno otherwise */ -int ata_set_mode (struct ata_port *ap,struct ata_device **r_failed_dev) +int ata_set_mode (struct ata_link *link,struct ata_device **r_failed_dev) { -struct ata_link *link = &ap->link; +struct ata_port *ap = link->ap;struct ata_device *dev;int rc =0 , used_dma =0 , found =0 ;
@@ -4938,12 +4938,13 @@ static int ata_start_drive(struct ata_de*/ int ata_device_resume (struct ata_device *dev) { -struct ata_port *ap = dev->link->ap; +struct ata_link *link = dev->link; +struct ata_port *ap = link->ap;if (ap->flags &ATA_FLAG_SUSPENDED ) {struct ata_device *failed_dev; ap->flags &= ~ATA_FLAG_SUSPENDED ; -while (ata_set_mode (ap, &failed_dev)) +while (ata_set_mode (link, &failed_dev))ata_dev_disable (failed_dev); }if (!ata_dev_enabled (dev))
drivers/scsi/libata-eh.c +59 -54
337 lines not on this page · raw message
drivers/scsi/libata.h +2 -1
@@ -56,7 +56,8 @@ extern int ata_dev_configure(struct ata_extern int ata_down_sata_spd_limit (struct ata_link *link);extern int ata_set_sata_spd_needed (struct ata_link *link);extern int ata_down_xfermask_limit (struct ata_device *dev,int force_pio0); -extern int ata_set_mode (struct ata_port *ap,struct ata_device **r_failed_dev); +extern int ata_set_mode (struct ata_link *link, +struct ata_device **r_failed_dev);extern void ata_qc_free (struct ata_queued_cmd *qc);extern void ata_qc_issue (struct ata_queued_cmd *qc);extern void __ata_qc_complete (struct ata_queued_cmd *qc);
Signature · 1 line
1.2.4
PATCH 7/14 libata-link: separate out link initialization functions
In reply to Tejun HeoSeparate out link initialization into ata_link_init() and ata_link_init_sata_spd_limit().
---
drivers/scsi/libata-core.c | 83 ++++++++++++++++++++++++++++++++++---------- 1 files changed, 65 insertions(+), 18 deletions(-)
b1520dbca5c449c69ccb6eb54a6449801d044b87
drivers/scsi/libata-core.c +65 -18
@@ -65,6 +65,7 @@ static unsigned int ata_dev_init_params( u16 heads, u16 sectors);static unsigned int ata_dev_set_xfermode (struct ata_device *dev);static void ata_dev_xfermask (struct ata_device *dev); +static int ata_link_init_sata_spd_limit (struct ata_link *link);static unsigned int ata_unique_id =1 ;static struct workqueue_struct *ata_wq;
@@ -5094,6 +5095,68 @@ void ata_dev_init(struct ata_device *dev }/** +* ata_link_init - Initialize an ata_link structure +* @ap: ATA port link is attached to +* @link: Link structure to initialize +* @pmp: Port multiplier port number +* +* Initialize @link. +* +* LOCKING: +* Kernel thread context (may sleep) +*/ +static void ata_link_init (struct ata_port *ap,struct ata_link *link,int pmp) +{ +struct ata_device *dev; + +/* clear everything except for devices */ + memset(link, 0, offsetof(struct ata_link, device[0])); + + link->ap = ap; + link->pmp = pmp; + link->active_tag =ATA_TAG_POISON ; + link->hw_sata_spd_limit =UINT_MAX ; + +ata_link_for_each_dev (dev, link) { + dev->link = link; + dev->devno = dev - link->device; +ata_dev_init (dev); + } +} + +/** +* ata_link_init_sata_spd_limit - Initialize link->sata_spd_limit +* @link: Link to configure sata_spd_limit for +* +* Initialize @link->[orig_]sata_spd_limit to the currently +* configured value. +* +* LOCKING: +* Kernel thread context (may sleep). +* +* RETURNS: +* 0 on success, -errno on failure. +*/ +static int ata_link_init_sata_spd_limit (struct ata_link *link) +{ + +u32 scontrol, spd; +int rc; + + rc =ata_scr_read (link,SCR_CONTROL , &scontrol); +if (rc) +return rc; + + spd = (scontrol >>4 ) &0xf ; +if (spd) + link->hw_sata_spd_limit &= (1 << spd) -1 ; + + link->sata_spd_limit = link->hw_sata_spd_limit; + +return 0 ; +} + +/** * ata_host_init - Initialize an ata_port structure * @ap: Structure to initialize * @host: associated SCSI mid-layer structure
@@ -5111,8 +5174,6 @@ static void ata_host_init(struct ata_porstruct ata_host_set *host_set, const struct ata_probe_ent *ent, unsigned int port_no) { - unsigned int i; - host->max_id = 16; host->max_lun =1 ; host->max_channel =1 ;
@@ -5133,8 +5194,6 @@ static void ata_host_init(struct ata_por ap->udma_mask = ent->udma_mask; ap->flags |= ent->host_flags; ap->ops = ent->port_ops; - ap->link.hw_sata_spd_limit =UINT_MAX ; - ap->link.active_tag =ATA_TAG_POISON ; ap->last_ctl =0xFF ;INIT_WORK (&ap->port_task,NULL ,NULL );
@@ -5146,14 +5205,7 @@ static void ata_host_init(struct ata_porif (ap->flags &ATA_FLAG_SATA ) ap->cbl =ATA_CBL_SATA ; - ap->link.ap = ap; - -for (i =0 ; i <ata_link_max_devices (&ap->link); i++) { -struct ata_device *dev = &ap->link.device[i]; - dev->link = &ap->link; - dev->devno = i; -ata_dev_init (dev); - } +ata_link_init (ap, &ap->link,0 );#ifdef ATA_IRQ_TRAP ap->stats.unhandled_irq =1 ;
@@ -5304,17 +5356,12 @@ int ata_device_add(const struct ata_probDPRINTK ("probe begin\n" );for (i =0 ; i < count; i++) {struct ata_port *ap; -u32 scontrol;int rc; ap = host_set->ports[i];/* init sata_spd_limit to the current value */ -if (ata_scr_read (&ap->link,SCR_CONTROL , &scontrol) ==0 ) { -int spd = (scontrol >>4 ) &0xf ; - ap->link.hw_sata_spd_limit &= (1 << spd) -1 ; - } - ap->link.sata_spd_limit = ap->link.hw_sata_spd_limit; +ata_link_init_sata_spd_limit (&ap->link); rc =scsi_add_host (ap->host, dev);if (rc) {
Signature · 1 line
1.2.4
PATCH 10/14 libata-link: add PM links
In reply to Tejun HeoAdd link->pmp, ap->nr_pm_links, ap->pm_link[], and implement/update printk helpers and iterators.
printk helpers are updated such that each component is identified as follows.
if PM is not attached,
port 'ataP:' link 'ataP:' dev 'ataP.DD:'
If PM is attached
port 'ataP:' dev 'ataP.LL:' link 'ataP.LL'
ie. link and device are identified their PMP number.
If PM is attached (ap->nr_pm_links != 0), ata_for_each_link() iterates over PM links, while __ata_for_each_link() iterates over the host link
+ PM links. If PM is not attached (ap->nr_pm_links == 0), both iterate over the host link only.
---
include/linux/libata.h | 52 ++++++++++++++++++++++++++++++++++++++++++------ 1 files changed, 46 insertions(+), 6 deletions(-)
1b7ba4a43a2a50e0732a8fbcfe99fc64ba2cdffe
include/linux/libata.h +46 -6
@@ -471,6 +471,7 @@ struct ata_eh_context {struct ata_link {struct ata_port *ap; +int pmp;/* port multiplier port # */ unsigned int active_tag;/* active tag on this link */ u32 sactive;/* active NCQ commands */
@@ -519,6 +520,9 @@ struct ata_port {struct ata_link link;/* host default link */ struct ata_device __dev1;/* storage for link.device[1] */ +int nr_pm_links;/* nr of available PM links */ +struct ata_link *pm_link;/* array of PM links */ +struct ata_host_stats stats;struct ata_host_set *host_set;struct device *dev;
@@ -796,11 +800,16 @@ extern void ata_do_eh(struct ata_port *a #define ata_port_printk(ap, lv, fmt, args...) \ printk(lv"ata%u: "fmt, (ap)->id , ##args) -#define ata_link_printk(link, lv, fmt, args...) \ - printk(lv"ata%u: "fmt, (link)->ap->id , ##args) +#define ata_link_printk(link, lv, fmt, args...) do { \ + if ((link)->ap->nr_pm_links) \ + printk(lv"ata%u.%02u: "fmt, (link)->ap->id, (link)->pmp , ##args); \ + else \ + printk(lv"ata%u: "fmt, (link)->ap->id , ##args); \ + } while(0) #define ata_dev_printk(dev, lv, fmt, args...) \ - printk(lv"ata%u.%02u: "fmt, (dev)->link->ap->id, (dev)->devno , ##args) + printk(lv"ata%u.%02u: "fmt, (dev)->link->ap->id, \ + (dev)->link->pmp + (dev)->devno , ##args)/* * ata_eh_info helpers
@@ -902,15 +911,46 @@ static inline unsigned int ata_dev_absen/* * link helpers */ +static inline int ata_is_host_link (const struct ata_link *link) +{ +return link == &link->ap->link; +} +static inline int ata_link_max_devices (const struct ata_link *link) { -if (link->ap->flags &ATA_FLAG_SLAVE_POSS ) +if (ata_is_host_link (link) && link->ap->flags &ATA_FLAG_SLAVE_POSS )return 2 ;return 1 ; } -#define ata_port_for_each_link (lk, ap) \ - for ((lk) = &(ap)->link; (lk); (lk) = NULL) +static inline struct ata_link *ata_port_first_link (struct ata_port *ap) +{ +if (ap->nr_pm_links) +return ap->pm_link; +return &ap->link; +} + +static inline struct ata_link *ata_port_next_link (struct ata_link *link) +{ +struct ata_port *ap = link->ap; + +if (link == &ap->link) { +if (!ap->nr_pm_links) +return NULL ; +return ap->pm_link; + } + +if (++link - ap->pm_link < ap->nr_pm_links) +return link; +return NULL ; +} + +#define __ata_port_for_each_link (lk, ap) \ + for ((lk) = &(ap)->link; (lk); (lk) = ata_port_next_link(lk)) + +#define ata_port_for_each_link (link, ap) \ + for ((link) = ata_port_first_link(ap); (link); \ + (link) = ata_port_next_link(link))#define ata_link_for_each_dev (dev, link) \ for ((dev) = (link)->device; \
Signature · 1 line
1.2.4
PATCH 11/14 libata-link: update ata_scsi_error() to handle PM links
In reply to Tejun HeoUpdate ata_scsi_error() to handle PM links. As error conditions can occur on both host and PM links, __ata_port_for_each_link() is used.
---
drivers/scsi/libata-eh.c | 15 ++++++++++----- 1 files changed, 10 insertions(+), 5 deletions(-)
48be52e2b9a5f5ec81af8e3da1e784a63f1cde47
drivers/scsi/libata-eh.c +10 -5
@@ -235,13 +235,17 @@ void ata_scsi_error(struct Scsi_Host *ho repeat:/* invoke error handler */ if (ap->ops->error_handler) { +struct ata_link *link; +/* fetch & clear EH info */ spin_lock_irqsave (hs_lock, flags); -memset (&ap->link.eh_context,0 ,sizeof (ap->link.eh_context)); -if (!(ap->flags &ATA_FLAG_UNLOADING )) - ap->link.eh_context.i = ap->link.eh_info; -memset (&ap->link.eh_info,0 ,sizeof (ap->link.eh_info)); +__ata_port_for_each_link (link, ap) { +memset (&link->eh_context,0 ,sizeof (link->eh_context)); +if (!(ap->flags &ATA_FLAG_UNLOADING )) + link->eh_context.i = link->eh_info; +memset (&link->eh_info,0 ,sizeof (link->eh_info)); + } ap->flags &= ~ATA_FLAG_EH_PENDING ;
@@ -269,7 +273,8 @@ void ata_scsi_error(struct Scsi_Host *ho }/* this run is complete, make sure EH info is clear */ -memset (&ap->link.eh_info,0 ,sizeof (ap->link.eh_info)); +__ata_port_for_each_link (link, ap) +memset (&link->eh_info,0 ,sizeof (link->eh_info));/* Clear host_eh_scheduled while holding hs_lock such * that if exception occurs after this point but
Signature · 1 line
1.2.4
PATCH 5/14 libata-link: linkify reset
In reply to Tejun HeoMake reset methods and related functions deal with ata_link instead of ata_port.
* ata_eh_about_to_do()
* ata_do_reset()
* ata_eh_reset()
* all prereset/reset/postreset methods
This patch introduces no behavior change.
---
drivers/scsi/ahci.c | 31 ++++++++++++++++----------- drivers/scsi/ata_piix.c | 14 +++++++----- drivers/scsi/libata-core.c | 36 +++++++++++++++++--------------- drivers/scsi/libata-eh.c | 50 ++++++++++++++++++++++---------------------- drivers/scsi/sata_sil24.c | 20 ++++++++++-------- include/linux/libata.h | 15 +++++++------ 6 files changed, 89 insertions(+), 77 deletions(-)
d3d6129dc940ccbb72c4bb834482456776342b84
drivers/scsi/ahci.c +18 -13
@@ -562,19 +562,22 @@ static int ahci_clo(struct ata_port *ap)return 0 ; } -static int ahci_prereset (struct ata_port *ap) +static int ahci_prereset (struct ata_link *link) { +struct ata_port *ap = link->ap; +if ((ap->flags &AHCI_FLAG_RESET_NEEDS_CLO ) && (ata_busy_wait (ap,ATA_BUSY ,1000 ) &ATA_BUSY )) {/* ATA_BUSY hasn't cleared, so send a CLO */ ahci_clo (ap); } -return ata_std_prereset (ap); +return ata_std_prereset (link); } -static int ahci_softreset (struct ata_port *ap,unsigned int *class) +static int ahci_softreset (struct ata_link *link,unsigned int *class) { +struct ata_port *ap = link->ap;struct ahci_port_priv *pp = ap->private_data;void __iomem *mmio = ap->host_set->mmio_base;void __iomem *port_mmio =ahci_port_base (mmio, ap->port_no);
@@ -587,7 +590,7 @@ static int ahci_softreset(struct ata_porDPRINTK ("ENTER\n" ); -if (ata_link_offline (&ap->link)) { +if (ata_link_offline (link)) {DPRINTK ("PHY reports no device\n" ); *class =ATA_DEV_NONE ;return 0 ;
@@ -617,7 +620,7 @@ static int ahci_softreset(struct ata_por/* restart engine */ ahci_start_engine (ap); -ata_tf_init (ap->link.device, &tf); +ata_tf_init (link->device, &tf); fis = pp->cmd_tbl;/* issue the first D2H Register FIS */
@@ -661,7 +664,7 @@ static int ahci_softreset(struct ata_pormsleep (150 ); *class =ATA_DEV_NONE ; -if (ata_link_online (&ap->link)) { +if (ata_link_online (link)) {if (ata_busy_sleep (ap,ATA_TMOUT_BOOT_QUICK ,ATA_TMOUT_BOOT )) { rc = -EIO ; reason ="device not ready" ;
@@ -676,21 +679,22 @@ static int ahci_softreset(struct ata_por fail_restart:ahci_start_engine (ap); fail: -ata_port_printk (ap,KERN_ERR ,"softreset failed (%s)\n" , reason); +ata_link_printk (link,KERN_ERR ,"softreset failed (%s)\n" , reason);return rc; } -static int ahci_hardreset (struct ata_port *ap,unsigned int *class) +static int ahci_hardreset (struct ata_link *link,unsigned int *class) { +struct ata_port *ap = link->ap;int rc;DPRINTK ("ENTER\n" );ahci_stop_engine (ap); - rc =sata_std_hardreset (ap, class); + rc =sata_std_hardreset (link, class);ahci_start_engine (ap); -if (rc ==0 &&ata_link_online (&ap->link)) +if (rc ==0 &&ata_link_online (link)) *class =ahci_dev_classify (ap);if (*class ==ATA_DEV_UNKNOWN ) *class =ATA_DEV_NONE ;
@@ -699,17 +703,18 @@ static int ahci_hardreset(struct ata_porreturn rc; } -static void ahci_postreset (struct ata_port *ap,unsigned int *class) +static void ahci_postreset (struct ata_link *link,unsigned int *class) { +struct ata_port *ap = link->ap;void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;unsigned long flags;u32 new_tmp, tmp; -ata_std_postreset (ap, class); +ata_std_postreset (link, class);/* clear stored SError */ spin_lock_irqsave (&ap->host_set->lock, flags); - ap->link.eh_info.serror =0 ; + link->eh_info.serror =0 ;spin_unlock_irqrestore (&ap->host_set->lock, flags);/* Make sure port's ATAPI bit is set appropriately */
drivers/scsi/ata_piix.c +8 -6
@@ -458,15 +458,16 @@ cbl40:/** * piix_pata_prereset - prereset for PATA host controller -* @ap: Target port +* @link: Target link * * Prereset including cable detection. * * LOCKING: * None (inherited from caller). */ -static int piix_pata_prereset (struct ata_port *ap) +static int piix_pata_prereset (struct ata_link *link) { +struct ata_port *ap = link->ap;struct pci_dev *pdev =to_pci_dev (ap->host_set->dev);if (!pci_test_config_bits (pdev, &piix_enable_bits[ap->hard_port_no])) {
@@ -476,7 +477,7 @@ static int piix_pata_prereset(struct atapiix_pata_cbl_detect (ap); -return ata_std_prereset (ap); +return ata_std_prereset (link); }static void piix_pata_error_handler (struct ata_port *ap)
@@ -487,7 +488,7 @@ static void piix_pata_error_handler(stru/** * piix_sata_prereset - prereset for SATA host controller -* @ap: Target port +* @link: Target link * * Reads and configures SATA PCI device's PCI config register * Port Configuration and Status (PCS) to determine port and
@@ -500,8 +501,9 @@ static void piix_pata_error_handler(stru* RETURNS: * 0 if device is present, -ENODEV otherwise. */ -static int piix_sata_prereset (struct ata_port *ap) +static int piix_sata_prereset (struct ata_link *link) { +struct ata_port *ap = link->ap;struct pci_dev *pdev =to_pci_dev (ap->host_set->dev);const unsigned int *map = ap->host_set->private_data;int base =2 * ap->hard_port_no;
@@ -547,7 +549,7 @@ static int piix_sata_prereset(struct atareturn -ENODEV ; } -return ata_std_prereset (ap); +return ata_std_prereset (link); }static void piix_sata_error_handler (struct ata_port *ap)
drivers/scsi/libata-core.c +19 -17
@@ -2521,9 +2521,9 @@ int sata_link_resume(struct ata_link *li/** * ata_std_prereset - prepare for reset -* @ap: ATA port to be reset +* @link: ATA link to be reset * -* @ap is about to be reset. Initialize it. +* @link is about to be reset. Initialize it. * * LOCKING: * Kernel thread context (may sleep)
@@ -2531,20 +2531,21 @@ int sata_link_resume(struct ata_link *li* RETURNS: * 0 on success, -errno otherwise. */ -int ata_std_prereset (struct ata_port *ap) +int ata_std_prereset (struct ata_link *link) { +struct ata_port *ap = link->ap;int boot_probe = ap->flags &ATA_FLAG_LOADING ;int rc;/* if we're about to do hardreset, don't bother */ -if (ap->link.eh_context.i.action &ATA_EH_HARDRESET ) +if (link->eh_context.i.action &ATA_EH_HARDRESET )return 0 ;/* resume link */ - rc =sata_link_resume (&ap->link, boot_probe); + rc =sata_link_resume (link, boot_probe);if (rc && rc != -EOPNOTSUPP ) {/* phy resume failed, whine but continue */ -ata_port_printk (ap,KERN_WARNING ,"failed to resume link " +ata_link_printk (link,KERN_WARNING ,"failed to resume link " "for reset (errno=%d)\n" , rc); }
@@ -2554,7 +2555,7 @@ int ata_std_prereset(struct ata_port *ap* cases. As we wait for !BSY after resets, this should be * safe. */ -if (boot_probe && !ata_link_offline (&ap->link)) +if (boot_probe && !ata_link_offline (link))ata_busy_sleep (ap,ATA_TMOUT_BOOT_QUICK ,ATA_TMOUT_BOOT );return 0 ;
@@ -2562,7 +2563,7 @@ int ata_std_prereset(struct ata_port *ap/** * ata_std_softreset - reset host port via ATA SRST -* @ap: port to reset +* @link: ATA link to reset * @classes: resulting classes of attached devices * * Reset host port using ATA SRST.
@@ -2573,15 +2574,16 @@ int ata_std_prereset(struct ata_port *ap* RETURNS: * 0 on success, -errno otherwise. */ -int ata_std_softreset (struct ata_port *ap,unsigned int *classes) +int ata_std_softreset (struct ata_link *link,unsigned int *classes) { +struct ata_port *ap = link->ap;unsigned int slave_possible = ap->flags &ATA_FLAG_SLAVE_POSS ;unsigned int devmask =0 , err_mask;u8 err;DPRINTK ("ENTER\n" ); -if (ata_link_offline (&ap->link)) { +if (ata_link_offline (link)) { classes[0 ] =ATA_DEV_NONE ; goto out; }
@@ -2599,7 +2601,7 @@ int ata_std_softreset(struct ata_port *aDPRINTK ("about to softreset, devmask=%x\n" , devmask); err_mask =ata_bus_softreset (ap, devmask);if (err_mask) { -ata_port_printk (ap,KERN_ERR ,"SRST failed (err_mask=0x%x)\n" , +ata_link_printk (link,KERN_ERR ,"SRST failed (err_mask=0x%x)\n" , err_mask);return -EIO ; }
@@ -2616,7 +2618,7 @@ int ata_std_softreset(struct ata_port *a/** * sata_std_hardreset - reset host port via SATA phy reset -* @ap: port to reset +* @link: link to reset * @class: resulting class of attached device * * SATA phy-reset host port using DET bits of SControl register.
@@ -2627,9 +2629,9 @@ int ata_std_softreset(struct ata_port *a* RETURNS: * 0 on success, -errno otherwise. */ -int sata_std_hardreset (struct ata_port *ap,unsigned int *class) +int sata_std_hardreset (struct ata_link *link,unsigned int *class) { -struct ata_link *link = &ap->link; +struct ata_port *ap = link->ap;u32 scontrol;int rc;
@@ -2692,7 +2694,7 @@ int sata_std_hardreset(struct ata_port */** * ata_std_postreset - standard postreset callback -* @ap: the target ata_port +* @link: the target ata_link * @classes: classes of attached devices * * This function is invoked after a successful reset. Note that
@@ -2702,9 +2704,9 @@ int sata_std_hardreset(struct ata_port ** LOCKING: * Kernel thread context (may sleep) */ -void ata_std_postreset (struct ata_port *ap,unsigned int *classes) +void ata_std_postreset (struct ata_link *link,unsigned int *classes) { -struct ata_link *link = &ap->link; +struct ata_port *ap = link->ap;u32 serror;DPRINTK ("ENTER\n" );
drivers/scsi/libata-eh.c +25 -25
164 lines not on this page · raw message
drivers/scsi/sata_sil24.c +11 -9
@@ -509,8 +509,9 @@ static int sil24_init_port(struct ata_poreturn 0 ; } -static int sil24_softreset (struct ata_port *ap,unsigned int *class) +static int sil24_softreset (struct ata_link *link,unsigned int *class) { +struct ata_port *ap = link->ap;void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;struct sil24_port_priv *pp = ap->private_data;struct sil24_prb *prb = &pp->cmd_block[0 ].ata.prb;
@@ -521,7 +522,7 @@ static int sil24_softreset(struct ata_poDPRINTK ("ENTER\n" ); -if (ata_link_offline (&ap->link)) { +if (ata_link_offline (link)) {DPRINTK ("PHY reports no device\n" ); *class =ATA_DEV_NONE ; goto out;
@@ -566,22 +567,23 @@ static int sil24_softreset(struct ata_poreturn 0 ; err: -ata_port_printk (ap,KERN_ERR ,"softreset failed (%s)\n" , reason); +ata_link_printk (link,KERN_ERR ,"softreset failed (%s)\n" , reason);return -EIO ; } -static int sil24_hardreset (struct ata_port *ap,unsigned int *class) +static int sil24_hardreset (struct ata_link *link,unsigned int *class) { +struct ata_port *ap = link->ap;void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;const char *reason;int tout_msec, rc;u32 tmp;/* sil24 does the right thing(tm) without any protection */ -ata_set_sata_spd (&ap->link); +ata_set_sata_spd (link); tout_msec =100 ; -if (ata_link_online (&ap->link)) +if (ata_link_online (link)) tout_msec =5000 ;writel (PORT_CS_DEV_RST , port +PORT_CTRL_STAT );
@@ -591,7 +593,7 @@ static int sil24_hardreset(struct ata_po/* SStatus oscillates between zero and valid status after * DEV_RST, debounce it. */ - rc =sata_link_debounce (&ap->link,ATA_DEBOUNCE_INTERVAL , + rc =sata_link_debounce (link,ATA_DEBOUNCE_INTERVAL ,ATA_DEBOUNCE_DURATION ,ATA_DEBOUNCE_TIMEOUT );if (rc) { reason ="PHY debouncing failed" ;
@@ -599,7 +601,7 @@ static int sil24_hardreset(struct ata_po }if (tmp &PORT_CS_DEV_RST ) { -if (ata_link_offline (&ap->link)) +if (ata_link_offline (link))return 0 ; reason ="link not ready" ; goto err;
@@ -614,7 +616,7 @@ static int sil24_hardreset(struct ata_poreturn -EAGAIN ; err: -ata_port_printk (ap,KERN_ERR ,"hardreset failed (%s)\n" , reason); +ata_link_printk (link,KERN_ERR ,"hardreset failed (%s)\n" , reason);return -EIO ; }
include/linux/libata.h +8 -7
@@ -292,13 +292,14 @@ enum ata_completion_errors {struct scsi_device ;struct ata_port_operations ;struct ata_port ; +struct ata_link ;struct ata_queued_cmd ;/* typedefs */ typedef void (*ata_qc_cb_t ) (struct ata_queued_cmd *qc); -typedef int (*ata_prereset_fn_t )(struct ata_port *ap); -typedef int (*ata_reset_fn_t )(struct ata_port *ap,unsigned int *classes); -typedef void (*ata_postreset_fn_t )(struct ata_port *ap,unsigned int *classes); +typedef int (*ata_prereset_fn_t )(struct ata_link *link); +typedef int (*ata_reset_fn_t )(struct ata_link *link,unsigned int *classes); +typedef void (*ata_postreset_fn_t )(struct ata_link *link,unsigned int *classes);struct ata_ioports {unsigned long cmd_addr;
@@ -622,10 +623,10 @@ extern int sata_link_debounce(struct ataunsigned long duration_msec, unsigned long timeout_msec);extern int sata_link_resume (struct ata_link *link,int quick); -extern int ata_std_prereset (struct ata_port *ap); -extern int ata_std_softreset (struct ata_port *ap,unsigned int *classes); -extern int sata_std_hardreset (struct ata_port *ap,unsigned int *class); -extern void ata_std_postreset (struct ata_port *ap,unsigned int *classes); +extern int ata_std_prereset (struct ata_link *link); +extern int ata_std_softreset (struct ata_link *link,unsigned int *classes); +extern int sata_std_hardreset (struct ata_link *link,unsigned int *class); +extern void ata_std_postreset (struct ata_link *link,unsigned int *classes);extern int ata_dev_revalidate (struct ata_device *dev,int post_reset);extern void ata_port_disable (struct ata_port *);extern void ata_std_ports (struct ata_ioports *ioaddr);
Signature · 1 line
1.2.4
PATCH 9/14 libata-link: implement ata_link_abort()
In reply to Tejun HeoImplement ata_link_abort().
---
drivers/scsi/libata-core.c | 1 + drivers/scsi/libata-eh.c | 50 ++++++++++++++++++++++++++++++++------------ include/linux/libata.h | 1 + 3 files changed, 38 insertions(+), 14 deletions(-)
77f07c1fd4a3c534664d3591e941489d20d51b85
drivers/scsi/libata-core.c +1 -0
@@ -5864,6 +5864,7 @@ EXPORT_SYMBOL_GPL(ata_scsi_device_resumeEXPORT_SYMBOL_GPL (ata_eng_timeout);EXPORT_SYMBOL_GPL (ata_port_schedule_eh); +EXPORT_SYMBOL_GPL (ata_link_abort);EXPORT_SYMBOL_GPL (ata_port_abort);EXPORT_SYMBOL_GPL (ata_port_freeze);EXPORT_SYMBOL_GPL (ata_eh_freeze_port);
drivers/scsi/libata-eh.c +36 -14
68 lines not on this page · raw message
include/linux/libata.h +1 -0
@@ -776,6 +776,7 @@ extern unsigned long ata_pci_default_filextern void ata_eng_timeout (struct ata_port *ap);extern void ata_port_schedule_eh (struct ata_port *ap); +extern int ata_link_abort (struct ata_link *link);extern int ata_port_abort (struct ata_port *ap);extern int ata_port_freeze (struct ata_port *ap);
Signature · 1 line
1.2.4
PATCH 3/14 libata-link: implement and use link/device iterators
In reply to Tejun HeoMultiple links and different number of devices per link should be considered to iterate over links and devices. This patch implements and uses link and device iterators - ata_port_for_each_link() and ata_link_for_each_dev() - and ata_link_max_devices().
This change makes a lot of functions iterate over only possible devices instead of from dev 0 to dev ATA_MAX_DEVICES. All such changes have been examined and nothing should be broken.
While at it, add a separating comment before device helpers to distinguish them better from link helpers and others.
---
drivers/scsi/libata-core.c | 71 +++++++++++++++++++------------------------ drivers/scsi/libata-eh.c | 72 +++++++++++++++++++++----------------------- drivers/scsi/libata-scsi.c | 10 +++--- include/linux/libata.h | 22 +++++++++++++ 4 files changed, 93 insertions(+), 82 deletions(-)
c3d11a19666ed32115710146ec33e24cb9336b7e
drivers/scsi/libata-core.c +31 -40
@@ -1313,8 +1313,9 @@ int ata_dev_configure(struct ata_device {struct ata_port *ap = dev->link->ap;const u16 *id = dev->id; +struct ata_device *tdev;unsigned int xfer_mask; -int i, rc; +int rc;if (!ata_dev_enabled (dev)) { DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n",
@@ -1435,10 +1436,11 @@ int ata_dev_configure(struct ata_device } ap->host->max_cmd_len =0 ; -for (i =0 ; i <ATA_MAX_DEVICES ; i++) +ata_link_for_each_dev (tdev, dev->link) { ap->host->max_cmd_len = max_t(unsigned int, ap->host->max_cmd_len, - ap->link.device[i].cdb_len); + tdev->cdb_len); + }/* limit bridge transfers to udma5, 200 sectors */ if (ata_dev_knobble (dev)) {
@@ -1479,13 +1481,13 @@ static int ata_bus_probe(struct ata_port {unsigned int classes[ATA_MAX_DEVICES ];int tries[ATA_MAX_DEVICES ]; -int i, rc, down_xfermask; +int rc, down_xfermask;struct ata_device *dev;ata_port_probe (ap); -for (i =0 ; i <ATA_MAX_DEVICES ; i++) - tries[i] =ATA_PROBE_MAX_TRIES ; +ata_link_for_each_dev (dev, &ap->link) + tries[dev->devno] =ATA_PROBE_MAX_TRIES ; retry: down_xfermask =0 ;
@@ -1493,9 +1495,7 @@ static int ata_bus_probe(struct ata_port/* reset and determine device classes */ ap->ops->phy_reset (ap); -for (i =0 ; i <ATA_MAX_DEVICES ; i++) { - dev = &ap->link.device[i]; - +ata_link_for_each_dev (dev, &ap->link) {if (!(ap->flags &ATA_FLAG_DISABLED ) && dev->class !=ATA_DEV_UNKNOWN ) classes[dev->devno] = dev->class;
@@ -1508,11 +1508,9 @@ static int ata_bus_probe(struct ata_portata_port_probe (ap);/* read IDENTIFY page and configure devices */ -for (i =0 ; i <ATA_MAX_DEVICES ; i++) { - dev = &ap->link.device[i]; - -if (tries[i]) - dev->class = classes[i]; +ata_link_for_each_dev (dev, &ap->link) { +if (tries[dev->devno]) + dev->class = classes[dev->devno];if (!ata_dev_enabled (dev))continue ;
@@ -1533,9 +1531,10 @@ static int ata_bus_probe(struct ata_port goto fail; } -for (i =0 ; i <ATA_MAX_DEVICES ; i++) -if (ata_dev_enabled (&ap->link.device[i])) +ata_link_for_each_dev (dev, &ap->link) { +if (ata_dev_enabled (dev))return 0 ; + }/* no device present, disable port */ ata_port_disable (ap);
@@ -2077,16 +2076,17 @@ static int ata_dev_set_mode(struct ata_d*/ int ata_set_mode (struct ata_port *ap,struct ata_device **r_failed_dev) { +struct ata_link *link = &ap->link;struct ata_device *dev; -int i, rc =0 , used_dma =0 , found =0 ; +int rc =0 , used_dma =0 , found =0 ;/* has private set_mode? */ if (ap->ops->set_mode) {/* FIXME: make ->set_mode handle no device case and * return error code and failing device on failure. */ -for (i =0 ; i <ATA_MAX_DEVICES ; i++) { -if (ata_dev_enabled (&ap->link.device[i])) { +ata_link_for_each_dev (dev, link) { +if (ata_dev_enabled (dev)) { ap->ops->set_mode (ap);break ; }
@@ -2095,11 +2095,9 @@ int ata_set_mode(struct ata_port *ap, st }/* step 1: calculate xfer_mask */ -for (i =0 ; i <ATA_MAX_DEVICES ; i++) { +ata_link_for_each_dev (dev, link) {unsigned int pio_mask, dma_mask; - dev = &ap->link.device[i]; -if (!ata_dev_enabled (dev))continue ;
@@ -2118,8 +2116,7 @@ int ata_set_mode(struct ata_port *ap, st goto out;/* step 2: always set host PIO timings */ -for (i =0 ; i <ATA_MAX_DEVICES ; i++) { - dev = &ap->link.device[i]; +ata_link_for_each_dev (dev, link) {if (!ata_dev_enabled (dev))continue ;
@@ -2136,9 +2133,7 @@ int ata_set_mode(struct ata_port *ap, st }/* step 3: set host DMA timings */ -for (i =0 ; i <ATA_MAX_DEVICES ; i++) { - dev = &ap->link.device[i]; - +ata_link_for_each_dev (dev, link) {if (!ata_dev_enabled (dev) || !dev->dma_mode)continue ;
@@ -2149,9 +2144,7 @@ int ata_set_mode(struct ata_port *ap, st }/* step 4: update devices' xfer mode */ -for (i =0 ; i <ATA_MAX_DEVICES ; i++) { - dev = &ap->link.device[i]; - +ata_link_for_each_dev (dev, link) {if (!ata_dev_enabled (dev))continue ;
@@ -2947,8 +2940,8 @@ static void ata_dev_xfermask(struct ata_struct ata_link *link = dev->link;struct ata_port *ap = link->ap;struct ata_host_set *hs = ap->host_set; +struct ata_device *d;unsigned long xfer_mask; -int i; xfer_mask =ata_pack_xfermask (ap->pio_mask, ap->mwdma_mask, ap->udma_mask);
@@ -2959,10 +2952,8 @@ static void ata_dev_xfermask(struct ata_if (ap->cbl ==ATA_CBL_PATA40 ) xfer_mask &= ~(0xF8 <<ATA_SHIFT_UDMA ); -/* FIXME: Use port-wide xfermask for now */ -for (i =0 ; i <ATA_MAX_DEVICES ; i++) { -struct ata_device *d = &link->device[i]; - +/* FIXME: Use link-wide xfermask for now */ +ata_link_for_each_dev (d, link) {if (ata_dev_absent (d))continue ;
@@ -5143,7 +5134,7 @@ static void ata_host_init(struct ata_por ap->link.ap = ap; -for (i =0 ; i <ATA_MAX_DEVICES ; i++) { +for (i =0 ; i <ata_link_max_devices (&ap->link); i++) {struct ata_device *dev = &ap->link.device[i]; dev->link = &ap->link; dev->devno = i;
@@ -5330,7 +5321,7 @@ int ata_device_add(const struct ata_probspin_lock_irqsave (&ap->host_set->lock, flags); ap->link.eh_info.probe_mask = - (1 <<ATA_MAX_DEVICES ) -1 ; + (1 <<ata_link_max_devices (&ap->link)) -1 ; ap->link.eh_info.action |=ATA_EH_SOFTRESET ;set_bit (bit, &ap->flags);
@@ -5396,7 +5387,7 @@ err_free_ret:void ata_port_detach (struct ata_port *ap) {unsigned long flags; -int i; +struct ata_device *dev;if (!ap->ops->error_handler)return ;
@@ -5405,8 +5396,8 @@ void ata_port_detach(struct ata_port *apspin_lock_irqsave (&ap->host_set->lock, flags); ap->flags |=ATA_FLAG_UNLOADING ; -for (i =0 ; i <ATA_MAX_DEVICES ; i++) - ap->link.device[i].flags |=ATA_DFLAG_DETACH ; +ata_link_for_each_dev (dev, &ap->link) + dev->flags |=ATA_DFLAG_DETACH ;ata_port_schedule_eh (ap);
drivers/scsi/libata-eh.c +35 -37
167 lines not on this page · raw message
drivers/scsi/libata-scsi.c +5 -5
@@ -2775,19 +2775,18 @@ void ata_scsi_simulate(struct ata_devicevoid ata_scsi_scan_host (struct ata_port *ap) { -unsigned int i; +struct ata_device *dev;if (ap->flags &ATA_FLAG_DISABLED )return ; -for (i =0 ; i <ATA_MAX_DEVICES ; i++) { -struct ata_device *dev = &ap->link.device[i]; +ata_link_for_each_dev (dev, &ap->link) {struct scsi_device *sdev;if (!ata_dev_enabled (dev) || dev->sdev)continue ; - sdev =__scsi_add_device (ap->host,0 , i,0 ,NULL ); + sdev =__scsi_add_device (ap->host,0 , dev->devno,0 ,NULL );if (!IS_ERR (sdev)) { dev->sdev = sdev;scsi_device_put (sdev);
@@ -2911,7 +2910,8 @@ static int ata_scsi_user_scan(struct Scsspin_lock_irqsave (&ap->host_set->lock, flags);if (id ==SCAN_WILD_CARD ) { - ap->link.eh_info.probe_mask |= (1 <<ATA_MAX_DEVICES ) -1 ; + ap->link.eh_info.probe_mask |= + (1 <<ata_link_max_devices (&ap->link)) -1 ; ap->link.eh_info.action |=ATA_EH_SOFTRESET ; }else {struct ata_device *dev =ata_find_dev (ap, id);
include/linux/libata.h +22 -0
@@ -861,6 +861,9 @@ static inline unsigned int ata_tag_interreturn tag ==ATA_MAX_QUEUE -1 ; } +/* +* device helpers +*/ static inline unsigned int ata_class_enabled (unsigned int class) {return class ==ATA_DEV_ATA || class ==ATA_DEV_ATAPI ;
@@ -891,6 +894,25 @@ static inline unsigned int ata_dev_absenreturn ata_class_absent (dev->class); } +/* +* link helpers +*/ +static inline int ata_link_max_devices (const struct ata_link *link) +{ +if (link->ap->flags &ATA_FLAG_SLAVE_POSS ) +return 2 ; +return 1 ; +} + +#define ata_port_for_each_link (lk, ap) \ + for ((lk) = &(ap)->link; (lk); (lk) = NULL) + +#define ata_link_for_each_dev (dev, link) \ + for ((dev) = (link)->device; \ + (dev) - (link)->device < ata_link_max_devices(link) || (dev = NULL); \ + (dev)++) + +static inline u8 ata_chk_status (struct ata_port *ap) {return ap->ops->check_status (ap);
Signature · 1 line
1.2.4
PATCH 14/14 libata-link: update hotplug to handle PM links
In reply to Tejun HeoUpdate hotplug to handle PM links. When PM is attached, the PMP number corresponds to I of SCSI C:H:I:L.
---
drivers/scsi/libata-eh.c | 43 +++++++++++++++++++++++++-------------- drivers/scsi/libata-scsi.c | 49 +++++++++++++++++++++++++++++++------------- 2 files changed, 62 insertions(+), 30 deletions(-)
314e603ad221c11cea7e123706d8c4c492466ab0
drivers/scsi/libata-eh.c +28 -15
@@ -1875,6 +1875,25 @@ static void ata_eh_finish(struct ata_por } } +static void ata_eh_scsi_handle_link_detach (struct ata_link *link) +{ +struct ata_port *ap = link->ap; +struct ata_device *dev; + +ata_link_for_each_dev (dev, link) { +unsigned long flags; + +if (!(dev->flags &ATA_DFLAG_DETACHED )) +continue ; + +spin_lock_irqsave (&ap->host_set->lock, flags); + dev->flags &= ~ATA_DFLAG_DETACHED ; +spin_unlock_irqrestore (&ap->host_set->lock, flags); + +ata_scsi_remove_dev (dev); + } +} +/** * ata_eh_scsi_hotplug - SCSI part of hotplug * @data: Pointer to ATA port to perform SCSI hotplug on
@@ -1891,8 +1910,7 @@ void ata_eh_scsi_hotplug(void *data) {struct ata_port *ap = data;unsigned long timeout; -struct ata_device *dev; -int requeue =0 ; +int i, requeue =0 ;DPRINTK ("ENTER\n" );
@@ -1912,19 +1930,14 @@ void ata_eh_scsi_hotplug(void *data)if (scsi_host_in_recovery (ap->host)) requeue =1 ; -/* unplug detached devices */ -ata_link_for_each_dev (dev, &ap->link) { -unsigned long flags; - -if (!(dev->flags &ATA_DFLAG_DETACHED )) -continue ; - -spin_lock_irqsave (&ap->host_set->lock, flags); - dev->flags &= ~ATA_DFLAG_DETACHED ; -spin_unlock_irqrestore (&ap->host_set->lock, flags); - -ata_scsi_remove_dev (dev); - } +/* Unplug detached devices. We cannot use link iterator here +* because PM links have to be scanned even if PM is currently +* not attached. Iterate manually. +*/ +ata_eh_scsi_handle_link_detach (&ap->link); +if (ap->pm_link) +for (i =0 ; i <ATA_PM_MAX_PORTS ; i++) +ata_eh_scsi_handle_link_detach (&ap->pm_link[i]);/* scan for new ones */ ata_scsi_scan_host (ap);
drivers/scsi/libata-scsi.c +34 -15
84 lines not on this page · raw message
Signature · 1 line
1.2.4
PATCH 13/14 libata-link: update EH to deal with PM links
In reply to Tejun HeoUpdate ata_eh_autopsy(), ata_eh_report() and ata_eh_recover() to deal with PM links. ata_eh_autopsy() and ata_eh_report() updates are straightforward. They just repeat the same operation over all configured links.
ata_eh_recover() update is more complex as it first processes all resets and then performs the rest. This is necessary as thawing with some links in unknown state can be dangerous. ehi->action is cleared on successful recovery of a link to avoid repeating recovery due to failures in other links.
ata_eh_recover() iterates over only PM links if PM is attached, and, on failure, the failing link is returned in @failed_link instead of disabling devices directly. These are to integrate ata_eh_recover() into PM EH later.
---
drivers/scsi/libata-eh.c | 192 ++++++++++++++++++++++++++++++++-------------- 1 files changed, 135 insertions(+), 57 deletions(-)
e76a448cb0f33855cd17ee65f4a5f5b83e6962af
drivers/scsi/libata-eh.c +135 -57
@@ -1196,8 +1196,8 @@ static int ata_eh_speed_down(struct ata_ }/** -* ata_eh_autopsy - analyze error and determine recovery action -* @link: ATA link to perform autopsy on +* ata_eh_link_autopsy - analyze error and determine recovery action +* @link: host link to perform autopsy on * * Analyze why @link failed and determine which recovery actions * are needed. This function also sets more detailed AC_ERR_*
@@ -1206,7 +1206,7 @@ static int ata_eh_speed_down(struct ata_* LOCKING: * Kernel thread context (may sleep). */ -static void ata_eh_autopsy (struct ata_link *link) +static void ata_eh_link_autopsy (struct ata_link *link) {struct ata_port *ap = link->ap;struct ata_eh_context *ehc = &link->eh_context;
@@ -1287,7 +1287,25 @@ static void ata_eh_autopsy(struct ata_li }/** -* ata_eh_report - report error handling to user +* ata_eh_autopsy - analyze error and determine recovery action +* @ap: host port to perform autopsy on +* +* Analyze all links of @ap and determine why they failed and +* which recovery actions are needed. +* +* LOCKING: +* Kernel thread context (may sleep). +*/ +static void ata_eh_autopsy (struct ata_port *ap) +{ +struct ata_link *link; + +__ata_port_for_each_link (link, ap) +ata_eh_link_autopsy (link); +} + +/** +* ata_eh_link_report - report error handling to user * @link: ATA link EH is going on * * Report EH to user.
@@ -1295,7 +1313,7 @@ static void ata_eh_autopsy(struct ata_li* LOCKING: * None. */ -static void ata_eh_report (struct ata_link *link) +static void ata_eh_link_report (struct ata_link *link) {struct ata_port *ap = link->ap;struct ata_eh_context *ehc = &link->eh_context;
@@ -1355,6 +1373,23 @@ static void ata_eh_report(struct ata_lin } } +/** +* ata_eh_report - report error handling to user +* @ap: ATA port to report EH about +* +* Report EH to user. +* +* LOCKING: +* None. +*/ +static void ata_eh_report (struct ata_port *ap) +{ +struct ata_link *link; + +__ata_port_for_each_link (link, ap) +ata_eh_link_report (link); +} +static int ata_do_reset (struct ata_link *link,ata_reset_fn_t reset,unsigned int *classes) {
@@ -1615,12 +1650,13 @@ static int ata_eh_skip_recovery(struct a* @softreset: softreset method (can be NULL) * @hardreset: hardreset method (can be NULL) * @postreset: postreset method (can be NULL) +* @r_failed_link: out parameter for failed link * * This is the alpha and omega, eum and yang, heart and soul of * libata exception handling. On entry, actions required to -* recover the port and hotplug requests are recorded in -* eh_context. This function executes all the operations with -* appropriate retrials and fallbacks to resurrect failed +* recover each link and hotplug requests are recorded in the +* link's eh_context. This function executes all the operations +* with appropriate retrials and fallbacks to resurrect failed * devices, detach goners and greet newcomers. * * LOCKING:
@@ -1631,71 +1667,106 @@ static int ata_eh_skip_recovery(struct a*/ static int ata_eh_recover (struct ata_port *ap,ata_prereset_fn_t prereset,ata_reset_fn_t softreset,ata_reset_fn_t hardreset, -ata_postreset_fn_t postreset) +ata_postreset_fn_t postreset, +struct ata_link **r_failed_link) { -struct ata_link *link = &ap->link; -struct ata_eh_context *ehc = &link->eh_context; +struct ata_link *link; +struct ata_eh_context *ehc;struct ata_device *dev; -int down_xfermask, rc; +int down_xfermask, reset, rc;DPRINTK ("ENTER\n" );/* prep for recovery */ -ata_link_for_each_dev (dev, link) { - ehc->tries[dev->devno] =ATA_EH_DEV_TRIES ; +ata_port_for_each_link (link, ap) { + ehc = &link->eh_context; -/* process hotplug request */ -if (dev->flags &ATA_DFLAG_DETACH ) -ata_eh_detach_dev (dev); +ata_link_for_each_dev (dev, link) { + ehc->tries[dev->devno] =ATA_EH_DEV_TRIES ; -if (!ata_dev_enabled (dev) && - (ehc->i.probe_mask & (1 << dev->devno) && - !(ehc->did_probe_mask & (1 << dev->devno)))) { -ata_eh_detach_dev (dev); -ata_dev_init (dev); - ehc->did_probe_mask |= (1 << dev->devno); - ehc->i.action |=ATA_EH_SOFTRESET ; +/* process hotplug request */ +if (dev->flags &ATA_DFLAG_DETACH ) +ata_eh_detach_dev (dev); + +if (!ata_dev_enabled (dev) && + (ehc->i.probe_mask & (1 << dev->devno) && + !(ehc->did_probe_mask & (1 << dev->devno)))) { +ata_eh_detach_dev (dev); +ata_dev_init (dev); + ehc->did_probe_mask |= (1 << dev->devno); + ehc->i.action |=ATA_EH_SOFTRESET ; + } } } retry: down_xfermask =0 ; rc =0 ; + reset =0 ; -/* skip EH if possible. */ -if (ata_eh_skip_recovery (link)) - ehc->i.action =0 ; +/* do we need to reset? */ +ata_port_for_each_link (link, ap) { + ehc = &link->eh_context; -ata_link_for_each_dev (dev, link) - ehc->classes[dev->devno] =ATA_DEV_UNKNOWN ; +/* skip EH if possible. */ +if (ata_eh_skip_recovery (link)) + ehc->i.action =0 ; + +if (ehc->i.action &ATA_EH_RESET_MASK ) + reset =1 ; + } + +ata_port_for_each_link (link, ap) { +ata_link_for_each_dev (dev, link) { + ehc = &link->eh_context; + ehc->classes[dev->devno] =ATA_DEV_UNKNOWN ; + } + }/* reset */ -if (ehc->i.action &ATA_EH_RESET_MASK ) { -ata_eh_freeze_port (ap); +if (reset) { +__ata_port_freeze (ap); - rc =ata_eh_reset (link,ata_link_nr_vacant (ap), prereset, - softreset, hardreset, postreset); -if (rc) { -ata_port_printk (ap,KERN_ERR , -"reset failed, giving up\n" ); - goto out; +ata_port_for_each_link (link, ap) { + ehc = &link->eh_context; + +if (!(ehc->i.action &ATA_EH_RESET_MASK )) +continue ; + + rc =ata_eh_reset (link,ata_link_nr_vacant (link), + prereset, softreset, hardreset, + postreset); +if (rc) { +ata_link_printk (link,KERN_ERR , +"reset failed, giving up\n" ); + goto out; + } }ata_eh_thaw_port (ap); } -/* revalidate existing devices and attach new ones */ - rc =ata_eh_revalidate_and_attach (link, &dev); -if (rc) - goto dev_fail; - -/* configure transfer mode if the port has been reset */ -if (ehc->flags &ATA_EHC_DID_RESET ) { - rc =ata_set_mode (link, &dev); -if (rc) { - down_xfermask =1 ; +/* the rest */ +ata_port_for_each_link (link, ap) { + ehc = &link->eh_context; + +/* revalidate existing devices and attach new ones */ + rc =ata_eh_revalidate_and_attach (link, &dev); +if (rc) goto dev_fail; + +/* configure transfer mode if the port has been reset */ +if (ehc->flags &ATA_EHC_DID_RESET ) { + rc =ata_set_mode (link, &dev); +if (rc) { + down_xfermask =1 ; + goto dev_fail; + } } + +/* this link is okay now */ + ehc->flags &= ~ATA_EHC_DID_RESET ; + ehc->i.action =0 ; } goto out;
@@ -1718,7 +1789,7 @@ static int ata_eh_recover(struct ata_por }if (ata_dev_enabled (dev) && !ehc->tries[dev->devno]) { -/* disable device if it has used up all its chances */ +/* the device has used all its chances, disable */ ata_dev_disable (dev);/* detach if offline */
@@ -1743,8 +1814,8 @@ static int ata_eh_recover(struct ata_por ehc->i.action |=ATA_EH_SOFTRESET ; } -if (ata_link_nr_enabled (ap)) { -ata_port_printk (ap,KERN_WARNING ,"failed to recover some " +if (ata_link_nr_enabled (link)) { +ata_link_printk (link,KERN_WARNING ,"failed to recover some " "devices, retrying in 5 secs\n" );ssleep (5 ); }else {
@@ -1755,10 +1826,8 @@ static int ata_eh_recover(struct ata_por goto retry; out: -if (rc) { -ata_link_for_each_dev (dev, link) -ata_dev_disable (dev); - } +if (rc && r_failed_link) + *r_failed_link = link;DPRINTK ("EXIT, rc=%d\n" , rc);return rc;
@@ -1887,11 +1956,20 @@ void ata_do_eh(struct ata_port *ap, ata_ ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { + struct ata_device *dev; +int rc; +if (!(ap->flags & (ATA_FLAG_LOADING |ATA_FLAG_UNLOADING ))) { - ata_eh_autopsy(&ap->link); -ata_eh_report (&ap->link); +ata_eh_autopsy (ap); +ata_eh_report (ap); + } + + rc =ata_eh_recover (ap, prereset, softreset, hardreset, postreset, +NULL ); +if (rc) { +ata_link_for_each_dev (dev, &ap->link) +ata_dev_disable (dev); } -ata_eh_recover (ap, prereset, softreset, hardreset, postreset);ata_eh_finish (ap); }
Signature · 1 line
1.2.4