Skip to contentSkip to conversation

uli526x again

DISCUSSION Rakotomandimby Mihamina 2 participants 2 messages May 21, 2006 – May 23, 2006

lore
Share & tools
lore
#0 lore raw

Hi,
Know it's worst about this.
I have an amd64, on a asrock 939 Dual Sata mother board, and the onbard network is an ULi526x one.
Know, just ifconfig makes the switch led to blink, and no possibility to
dhclient: I never get ip address from the DHCP server.
I tried with 2.6.16 kernels. Nothing about uli526x file/stuff in the 2.6.17, so it should be OK.

What would you sugest to do?

Signature · 3 lines
A powerfull GroupWare, CMS, CRM, ECM: CPS (Open Source & GPL).
Opengroupware, SPIP, Plone, PhpBB, JetSpeed... are good: CPS is better.
http://www.cps-project.org for downloads & documentation.
#1 lore raw
Quoted 4 lines · Rakotomandimby Mihamina

I tried with 2.6.16 kernels. Nothing about uli526x file/stuff in the 2.6.17, so it should be OK.

What would you sugest to do?

The last thing I've seen about the uli526x driver is the following thread on this mailing list:

http://groups.google.com/group/linux.kernel/browse_frm/thread/37c6b2a3fdc75583

Cheers // Fredrik Roubert

Signature · 2 lines
Sörbyplan 5       |  +46 8 7609169 / +46 708 776974
SE-163 71 Spånga  |  http://www.df.lth.se/~roubert/