abituguru: Fix fan detection
Subsystems (2)
PATCH 29/44 abituguru: Fix fan detection
From: Hans de Goede <j.w.r.degoede at hhs.nl>
One of my testers had a problem where the driver only saw 2 of the 4 fan sensors his uGuru has, this fixes this.
-accept 0x40 (bit 6) being high as a valid fan sensor setting for all fans
not just fan 1, I have a feeling this bit indicates whether or not a fan is actually connected .
Signed-off-by Hans de Goede <j.w.r.degoede at hhs.nl>
Signed-off-by Jean Delvare <khali at linux-fr.org>
Signed-off-by Greg Kroah-Hartman <gregkh at suse.de>
--- drivers/hwmon/abituguru.c | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-)
drivers/hwmon/abituguru.c +2 -3
@@ -529,9 +529,8 @@ abituguru_detect_no_bank2_sensors(struct-0x08 enable beep -0x01 enable alarm All other bits should be 0, but on some motherboards -0x40 (bit 6) is also high, at least for fan1 */ -if ((!i && (data->bank2_settings[i][0 ] & ~0xC9 )) || - (i && (data->bank2_settings[i][0 ] & ~0x89 ))) { +0x40 (bit 6) is also high for some of the fans?? */ +if (data->bank2_settings[i][0 ] & ~0xC9 ) {ABIT_UGURU_DEBUG (2 ," bank2 sensor %d does not seem " "to be a fan sensor: settings[0] = %02X\n" , i, (unsigned int )data->bank2_settings[i][0 ]);
Signature · 1 line
1.4.0