Skip to contentSkip to conversation

L2CAP MTU and packet fragmentation?

Bluez-users Stephen Strowes 2 participants 7 messages Jun 23, 2006 – Jun 26, 2006 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi,

Forgive me if this has been answered time and again, but I can't seem to access the archives just now. Google's not helping me much either.

I have a bit of BlueZ code, which I have to make use of L2CAP sockets to communicate between devices. I've seen that I can alter the MTU for packets, but I'm surprised that packets don't get fragmented as per plain UDP when a packet larger than the MTU is passed to send().

Have I missed a configuration option somewhere?

I could live with the MTU being 64k with no fragmentation, but I seem to get quite a lot of corrupt packets over around 2kB.

Cheers,
Stephen.

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#1 lore raw

Hi Stephen,

Quoted 9 lines

Forgive me if this has been answered time and again, but I can't seem to access the archives just now. Google's not helping me much either.

I have a bit of BlueZ code, which I have to make use of L2CAP sockets to communicate between devices. I've seen that I can alter the MTU for packets, but I'm surprised that packets don't get fragmented as per plain UDP when a packet larger than the MTU is passed to send().

Have I missed a configuration option somewhere?

the L2CAP socket is a SOCK_SEQPACKET and you have to honor that MTU. It is not a stream or a connection-less socket.

Quoted 2 lines

I could live with the MTU being 64k with no fragmentation, but I seem to get quite a lot of corrupt packets over around 2kB.

I have no idea what you are talking about. The L2CAP layer is reliable and the underlaying ACL link, too.

Regards

Marcel

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#2 lore raw

Hi,

Quoted 5 lines · Marcel Holtmann
Quoted 2 lines

I could live with the MTU being 64k with no fragmentation, but I seem to get quite a lot of corrupt packets over around 2kB.

I have no idea what you are talking about. The L2CAP layer is reliable and the underlaying ACL link, too.

Sorry, correction, I get a lot of lost packets. I assume either because they've become corrupted, or perhaps because they never arrive.

I get between 20-40% packet loss with packet sizes around 3000 bytes, and more loss as packet sizes increase. l2ping says 56% loss at 3500 bytes.

This loss is what prompted my question. This behaviour, actually, is why I'm using L2CAP -- because it was likened to UDP in what I'd read previously. Ironically, perhaps, it's just a little *too* lossy :-)

I'll either bolt on some packet segmentation to my app, or use RFCOMM for now.

Cheers,
S.

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#3 lore raw

Hi Stephen,

Quoted 9 lines
Quoted 5 lines
Quoted 2 lines

I could live with the MTU being 64k with no fragmentation, but I seem to get quite a lot of corrupt packets over around 2kB.

I have no idea what you are talking about. The L2CAP layer is reliable and the underlaying ACL link, too.

Sorry, correction, I get a lot of lost packets. I assume either because they've become corrupted, or perhaps because they never arrive.

Quoted 7 lines

I get between 20-40% packet loss with packet sizes around 3000 bytes, and more loss as packet sizes increase. l2ping says 56% loss at 3500 bytes.

This loss is what prompted my question. This behaviour, actually, is why I'm using L2CAP -- because it was likened to UDP in what I'd read previously. Ironically, perhaps, it's just a little *too* lossy :-)

with l2ping you use the L2CAP signal channel and it happens that some remote implementation don't handle this very well. Hence you might see a loss percentage. This actually means unanswered echo requests.

If you actually use L2CAP data channel with SOCK_SEQPACKET then you won't see a loss at all. It is a reliable channel.

Quoted 2 lines

I'll either bolt on some packet segmentation to my app, or use RFCOMM for now.

Or help Martin Roehricht to extend L2CAP with retransmission and flow control. Once this has been implemented it will be possible to have a SOCK_STREAM on L2CAP like you have with RFCOMM.

Regards

Marcel

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#4 lore raw

Hi,

Quoted 2 lines

If you actually use L2CAP data channel with SOCK_SEQPACKET then you won't see a loss at all. It is a reliable channel.

Yeah, this is what I'm doing, but I'm seeing loss.

I'm following the code from http://people.csail.mit.edu/albert/bluez-intro/x556.html, but not fiddling with anything related to unreliability in section 4.3.2.

Trying the same between two different machines gets me the reliable data transfer.

Am I dealing with bad hardware here? Hardware with bad drivers (I'm dealing with Bluetooth built into a HP iPaq running Familiar Linux, kernel version 2.6.12)? Or an out of date bluez-utils (bluez-utils-nodbus package is version 2.14-r4)?

Cheers,
S.

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#5 lore raw

Hi Stephen,

Quoted 10 lines
Quoted 2 lines

If you actually use L2CAP data channel with SOCK_SEQPACKET then you won't see a loss at all. It is a reliable channel.

Yeah, this is what I'm doing, but I'm seeing loss.

I'm following the code from http://people.csail.mit.edu/albert/bluez-intro/x556.html, but not fiddling with anything related to unreliability in section 4.3.2.

Trying the same between two different machines gets me the reliable data transfer.

Am I dealing with bad hardware here? Hardware with bad drivers (I'm dealing with Bluetooth built into a HP iPaq running Familiar Linux, kernel version 2.6.12)? Or an out of date bluez-utils (bluez-utils-nodbus package is version 2.14-r4)?

you can't see loss on the L2CAP data channel. This is impossible.

Regards

Marcel

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#6 lore raw

Hi,

Quoted 5 lines
Quoted 1 line

Am I dealing with bad hardware here? Hardware with bad drivers (I'm dealing with Bluetooth

built into a HP iPaq running Familiar Linux, kernel version 2.6.12)? Or an out of date bluez-utils (bluez-utils-nodbus package is version 2.14-r4)?

you can't see loss on the L2CAP data channel. This is impossible.

I'll put the packet loss down to bad hardware support then, since it's not a bluez problem.

Cheers,
S.

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users