Skip to contentSkip to conversation

: tsi108 i2c support

PATCH New DENX Support System 1 participant 1 message Jul 28, 2006

lore
Share & tools
lore
#0 lore raw

PATCH 7/8 : tsi108 i2c support

Hello list,

inside the automatic U-Boot patch tracking system a new ticket [DNX#2006072842000051] was created:

<snip>

Quoted 92 lines

tsi108 i2c support.

---
 board/mpc7448hpc2/ts_i2c.h     |  104 ++++++++++++++
 board/mpc7448hpc2/tsi108_i2c.c |  295
++++++++++++++++++++++++++++++++++++++++
 board/mpc7448hpc2/tsi108_i2c.h |   42 ++++++
 3 files changed, 441 insertions(+), 0 deletions(-)
board/mpc7448hpc2/ts_i2c.h new file +24 -0
new file mode 100644
index 0000000..722b06f
@@ -0,0 +1,104 @@
+/*
+ * (C) Copyright 2004-05;  Tundra Semiconductor Corp.
+ * 
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _TS_I2C_H_
+#define _TS_I2C_H_
+
+#define I2C_NUM_REGS_TO_TEST

0x00000004

board/mpc7448hpc2/ts_i2c.h new file +5 -0
+
+/* 
+ * I2C : Register address offset definitions
+ */
+#define I2C_CNTRL1

(0x00000000)
+#define I2C_CNTRL2
(0x00000004)
+#define I2C_RD_DATA
(0x00000008)
+#define I2C_TX_DATA
(0x0000000c)

board/mpc7448hpc2/ts_i2c.h new file +8 -0
+
+/*
+ * I2C : Register Bit Masks and Reset Values
+ *           definitions for every register 
+ */
+
+/* I2C_CNTRL1 : Reset Value */
+#define I2C_CNTRL1_RESET_VALUE

(0x0000000a)

board/mpc7448hpc2/ts_i2c.h new file +3 -0
+
+/* I2C_CNTRL1 : Register Bits Masks Definitions */
+#define I2C_CNTRL1_DEVCODE

(0x0000000f)
+#define I2C_CNTRL1_PAGE
(0x00000700)
+#define I2C_CNTRL1_BYTADDR
(0x00ff0000)
+#define I2C_CNTRL1_I2CWRITE
(0x01000000)

board/mpc7448hpc2/ts_i2c.h new file +3 -0
+
+/* I2C_CNTRL1 : Read/Write Bit Mask Definition */
+#define I2C_CNTRL1_RWMASK

(0x01ff070f)

board/mpc7448hpc2/ts_i2c.h new file +3 -0
+
+/* I2C_CNTRL1 : Unused/Reserved bits Definition */
+#define I2C_CNTRL1_RESERVED

(0xfe00f8f0)

board/mpc7448hpc2/ts_i2c.h new file +3 -0
+
+/* I2C_CNTRL2 : Reset Value */
+#define I2C_CNTRL2_RESET_VALUE

(0x00000000)

board/mpc7448hpc2/ts_i2c.h new file +3 -0
+
+/* I2C_CNTRL2 : Register Bits Masks Definitions */
+#define I2C_CNTRL2_SIZE

(0x00000003)
+#define I2C_CNTRL2_LANE
(0x0000000c)

Quoted 8 lines

+#define I2C_CNTRL2_MULTIBYTE
(0x00000010)
+#define I2C_CNTRL2_START
(0x00000100)
+#define I2C_CNTRL2_WR_STATUS
(0x00010000)
+#define I2C_CNTRL2_RD_STATUS
(0x00020000)

</snip>

Your U-Boot support team