Kernel 2.6.17.8 on Quad AMD Opteron 852 with 16x 4GB Modules (64GB RAM)
Quoted 16 lines
Quoted 14 lines · Björn Engelhardt
Hello,
we upgraded a Server from 32 GB RAM to 64 GB. Now we try to get a Linux (FC5) with kernel 2.6.17.8 on a Quad Opteron (852; 64bit)-system with 16x 4GB modules to run.
With 32 GB (8x 4GB modules) the system starts without any problems, but above I get kernelpanics.
The output then gives me several memoryaddresses bevore the panic appears. The board (a Tyan K8QW,model S4881) should support up to 64GB Ram. A Memorytest under Linux recognizes the 64GB and continues without an error.
I tried several BIOS-Settings.
Does the kernel support the new 4GB-Modules by 64GB Ram?
Quoted 3 lines
Sounds like your memory is bad.
-hpa
My friend Bjoern has forgotten to write that we actually checked the memory with only 32GB and kernel booted normally. The problem appears when we want to put more, even just next 4GB, over the 32GB. It seems to be a kernel problem to me. Will try to retrive and send oops tonight.
Thanks for any suggestion!
Regards
Maciek