SNMPv2 "ipFragFails" counter error
Subsystems (3)
Hi, All
When I tested Linux kernel 2.6.17.7 about statistics
"ipFragFails",found that this counter couldn't increase correctly. The criteria is RFC2011:
RFC2011
ipFragFails OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current DESCRIPTION
"The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set."
::= { ip 18 }
When I send big IP packet to a router with DF bit set to 1 which need to be fragmented, and router just sends an ICMP error message ICMP_FRAG_NEEDED but no increments for this counter(in the function ip_fragment).
net/ipv4/ip_output.c +1 -0
@@ -441,6 +441,7 @@ iph = skb->nh.iph;if (unlikely ((iph->frag_off &htons (IP_DF )) && !skb->local_df)) { +IP_INC_STATS (IPSTATS_MIB_FRAGFAILS );icmp_send (skb,ICMP_DEST_UNREACH ,ICMP_FRAG_NEEDED ,htonl (dst_mtu (&rt->u.dst)));kfree_skb (skb);
David Miller
maintainerFrom: weidong <[email protected]>
Date: Fri, 01 Sep 2006 10:39:35 -0400
Quoted 15 lines
Hi, All
When I tested Linux kernel 2.6.17.7 about statistics
"ipFragFails",found that this counter couldn't increase correctly. The criteria is RFC2011:
RFC2011
ipFragFails OBJECT-TYPESYNTAX Counter32 MAX-ACCESS read-only STATUS currentDESCRIPTION
"The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set."
::= { ip 18 }
Quoted 6 lines
When I send big IP packet to a router with DF bit set to 1 which need to be fragmented, and router just sends an ICMP error message
ICMP_FRAG_NEEDEDbut no increments for thiscounter(in the function ip_fragment).Signed-off-by Wei Dong <[email protected]>
Patch applied, thank you very much.