i2c: New bus driver for TI OMAP boards
Subsystems (4)
PATCH 15/30 i2c: New bus driver for TI OMAP boards
From: Komal Shah <komal_shah802003 at yahoo.com>
i2c: New bus driver for TI OMAP boards
This patch adds I2C bus driver for various Texas Instruments (TI) OMAP1/2 (http://www.ti.com/omap) series based boards like OMAP1510/1610/1710/242x.
Signed-off-by Komal Shah <komal_shah802003 at yahoo.com>
Signed-off-by Jean Delvare <khali at linux-fr.org>
Signed-off-by Greg Kroah-Hartman <gregkh at suse.de>
--- drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 drivers/i2c/busses/i2c-omap.c | 676 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 687 insertions(+), 0 deletions(-)
drivers/i2c/busses/Kconfig +10 -0
@@ -287,6 +287,16 @@ config I2C_OCORES This driver can also be built as a module. If so, the module will be called i2c-ocores. +config I2C_OMAP + tristate "OMAP I2C adapter" + depends on I2C && ARCH_OMAP + default y if MACH_OMAP_H3 || MACH_OMAP_OSK + help + If you say yes to this option, support will be included for the + I2C interface on the Texas Instruments OMAP1/2 family of processors. + Like OMAP1510/1610/1710/5912 and OMAP242x. + For details see http://www.ti.com/omap. + config I2C_PARPORT tristate "Parallel port adapter" depends on I2C && PARPORT
drivers/i2c/busses/Makefile +1 -0
@@ -24,6 +24,7 @@ obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o +obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
drivers/i2c/busses/i2c-omap.c new file +676 -0
676 lines not on this page · raw message
Signature · 1 line
1.4.2.1