Skip to contentSkip to conversation

libata: test driver for Marvell PATA

PATCH In review Alan Cox 2 participants 2 messages Sep 29, 2006 libata

lore
Share & tools
lore

Alan Cox

author
#0 lore raw

PATCH 1/1 libata: test driver for Marvell PATA

This should drive the Marvell PATA (and first two SATA ports) but I don't have hardware to test so give it a spin. Currently it'll probably clash with the AHCI driver if you are using the SATA ports but if we know this code works for the PATA port that is fixable later on.

Alan

drivers/ata/Kconfig +9 -0
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.18-mm2/drivers/ata/Kconfig linux-2.6.18-mm2/drivers/ata/Kconfig
@@ -327,6 +327,15 @@
 
 	  If unsure, say N.
 
+config PATA_MARVELL
+	tristate "Marvell PATA support via legacy nmode"
+	depends on PCI
+	help
+	  This option enables limited support for the Marvell 88SE6145 ATA
+	  controller.
+
+	  If unsure, say N.
+
 config PATA_MPIIX
 	tristate "Intel PATA MPIIX support"
 	depends on PCI
drivers/ata/Makefile +1 -0
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.18-mm2/drivers/ata/Makefile linux-2.6.18-mm2/drivers/ata/Makefile
@@ -38,6 +38,7 @@
 obj-$(CONFIG_PATA_NS87410)	+= pata_ns87410.o
 obj-$(CONFIG_PATA_OPTI)		+= pata_opti.o
 obj-$(CONFIG_PATA_OPTIDMA)	+= pata_optidma.o
+obj-$(CONFIG_PATA_MARVELL)	+= pata_marvell.o
 obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
 obj-$(CONFIG_PATA_OLDPIIX)	+= pata_oldpiix.o
 obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
drivers/ata/pata_marvell.c +210 -0

210 lines not on this page · raw message

#1 lore raw
Quoted 13 lines · Alan Cox

This should drive the Marvell PATA (and first two SATA ports) but I don't have hardware to test so give it a spin. Currently it'll probably clash with the AHCI driver if you are using the SATA ports but if we know this code works for the PATA port that is fixable later on.

Alan

diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.18-mm2/drivers/ata/Kconfig linux-2.6.18-mm2/drivers/ata/Kconfig
--- linux.vanilla-2.6.18-mm2/drivers/ata/Kconfig 2006-09-28
14:33:46.000000000 +0100
+++ linux-2.6.18-mm2/drivers/ata/Kconfig 2006-09-29
17:42:31.392428080 +0100

drivers/ata/Kconfig line 331

Quoted 5 lines
drivers/ata/Kconfig +2 -0
@@ -327,6 +327,15 @@
 
 	  If unsure, say N.
 
+config PATA_MARVELL
+	tristate "Marvell PATA support via legacy nmode"

mode?

Chris

Signature · 3 lines
Chris Boot
[email protected]
http://www.bootc.net/