powerpc: consolidate feature fixup code
PATCH 1/5 powerpc: consolidate feature fixup code
There are currently two versions of the functions for applying the feature fixups, one for CPU features and one for firmware features. In addition, they are both in assembly and with separate implementations for 32 and 64 bits. identify_cpu() is also implemented in assembly and separately for 32 and 64 bits.
This patch replaces them with a pair of C functions. The call sites are slightly moved on ppc64 as well to be called from C instead of from assembly, though it's a very small change, and thus shouldn't cause any problem.
arch/powerpc/kernel/head_64.S +0 -19
@@ -1580,11 +1580,6 @@ _STATIC(__start_initialization_iSeries) li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) - LOAD_REG_IMMEDIATE(r3,cpu_specs) - LOAD_REG_IMMEDIATE(r4,cur_cpu_spec) - li r5,0 - bl .identify_cpu - LOAD_REG_IMMEDIATE(r2,__toc_start) addi r2,r2,0x4000 addi r2,r2,0x4000
@@ -1964,13 +1959,6 @@ _STATIC(start_here_multiplatform) addi r2,r2,0x4000 add r2,r2,r26 - LOAD_REG_IMMEDIATE(r3, cpu_specs) - add r3,r3,r26 - LOAD_REG_IMMEDIATE(r4,cur_cpu_spec) - add r4,r4,r26 - mr r5,r26 - bl .identify_cpu - /* Do very early kernel initializations, including initial hash table, * stab and slb setup before we turn on relocation. */
@@ -2000,13 +1988,6 @@ _STATIC(start_here_common) li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) - /* Apply the CPUs-specific fixups (nop out sections not relevant - * to this CPU - */ - li r3,0 - bl .do_cpu_ftr_fixups - bl .do_fw_ftr_fixups - /* ptr to current */ LOAD_REG_IMMEDIATE(r4, init_task) std r4,PACACURRENT(r13)
arch/powerpc/kernel/misc_64.S +0 -124
130 lines not on this page · raw message
arch/powerpc/kernel/setup-common.c +36 -0
@@ -520,3 +520,39 @@ void __init setup_panic(void) {atomic_notifier_chain_register (&panic_notifier_list, &ppc_panic_block); } + +void do_feature_fixups (unsigned long offset,unsigned long value, +void *fixup_start,void *fixup_end) +{ +struct fixup_entry { +unsigned long mask; +unsigned long value; +unsigned int *start; +unsigned int *end; + } *fcur, *fend; + + fcur = fixup_start; + fend = fixup_end; + +for (; fcur < fend; fcur++) { +unsigned int *pstart, *pend, *p; + +if ((value & fcur->mask) == fcur->value) +continue ; + +/* These PTRRELOCs will disappear once the new scheme for +* modules and vdso is implemented +*/ + pstart =PTRRELOC (fcur->start); + pend =PTRRELOC (fcur->end); + +for (p = pstart; p < pend; p++) { + *p =0x60000000u ; + asmvolatile ("dcbst 0, %0" : :"r" (p)); + } + asmvolatile ("sync" : : :"memory" ); +for (p = pstart; p < pend; p++) + asmvolatile ("icbi 0,%0" : :"r" (p)); + asmvolatile ("sync; isync" : : :"memory" ); + } +}
arch/powerpc/kernel/setup.h +6 -3
@@ -1,9 +1,12 @@#ifndef _POWERPC_KERNEL_SETUP_H#define _POWERPC_KERNEL_SETUP_H -void check_for_initrd (void ); -void do_init_bootmem (void ); -void setup_panic (void ); +extern void check_for_initrd (void ); +extern void do_init_bootmem (void ); +extern void setup_panic (void ); +extern void do_feature_fixups (unsigned long offset,unsigned long value, +void *fixup_start,void *fixup_end); +extern int do_early_xmon;#endif /* _POWERPC_KERNEL_SETUP_H */
arch/powerpc/kernel/setup_32.c +7 -2
@@ -90,7 +90,9 @@ int ucache_bsize;*/ unsigned long __init early_init (unsigned long dt_ptr) { +extern unsigned int __start___ftr_fixup, __stop___ftr_fixup;unsigned long offset =reloc_offset (); +struct cpu_spec *spec;/* First zero the BSS -- use memset_io, some platforms don't have * caches on yet */
@@ -100,8 +102,11 @@ unsigned long __init early_init(unsigned* Identify the CPU type and fix up code sections * that depend on which cpu we have. */ -identify_cpu (offset,0 ); -do_cpu_ftr_fixups (offset); + spec =identify_cpu (offset); + +do_feature_fixups (offset, spec->cpu_features, +PTRRELOC (&__start___ftr_fixup), +PTRRELOC (&__stop___ftr_fixup));return KERNELBASE + offset; }
arch/powerpc/kernel/setup_64.c +14 -0
@@ -170,6 +170,9 @@ void __init setup_paca(int cpu)void __init early_setup (unsigned long dt_ptr) { +/* Identify CPU type */ +identify_cpu (0 ); +/* Assume we're on cpu 0 for now. Don't write to the paca yet! */ setup_paca (0 );
@@ -346,8 +349,19 @@ static void __init initialize_cache_info*/ void __init setup_system (void ) { +extern unsigned int __start___ftr_fixup, __stop___ftr_fixup; +extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup; +DBG (" -> setup_system()\n" ); +/* Apply the CPUs-specific and firmware specific fixups to kernel +* text (nop out sections not relevant to this CPU or this firmware) +*/ +do_feature_fixups (0 , cur_cpu_spec->cpu_features, + &__start___ftr_fixup, &__stop___ftr_fixup); +do_feature_fixups (0 , powerpc_firmware_features, + &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup); +/* * Unflatten the device-tree passed by prom_init or kexec */
arch/powerpc/kernel/cputable.c +23 -1
@@ -73,7 +73,7 @@ extern void __restore_cpu_ppc970(void);#define PPC_FEATURE_SPE_COMP 0#endif -struct cpu_spec cpu_specs[] = { +static struct cpu_spec cpu_specs[] = { #ifdef CONFIG_PPC64 { /* Power3 */ .pvr_mask = 0xffff0000,
@@ -1152,3 +1152,25 @@ struct cpu_spec cpu_specs[] = {#endif /* !CLASSIC_PPC */ #endif /* CONFIG_PPC32 */ }; + +struct cpu_spec *identify_cpu (unsigned long offset) +{ +struct cpu_spec *s = cpu_specs; +struct cpu_spec **cur = &cur_cpu_spec; +unsigned int pvr =mfspr (SPRN_PVR ); +int i; + + s =PTRRELOC (s); + cur =PTRRELOC (cur); + +if (*cur !=NULL ) +return PTRRELOC (*cur); + +for (i =0 ; i <ARRAY_SIZE (cpu_specs); i++,s++) +if ((pvr & s->pvr_mask) == s->pvr_value) { + *cur = cpu_specs + i; +return s; + } +BUG (); +return NULL ; +}
arch/powerpc/kernel/misc_32.S +0 -74
80 lines not on this page · raw message
include/asm-powerpc/cputable.h +1 -2
@@ -89,8 +89,7 @@ struct cpu_spec {extern struct cpu_spec *cur_cpu_spec; -extern void identify_cpu (unsigned long offset,unsigned long cpu); -extern void do_cpu_ftr_fixups (unsigned long offset); +extern struct cpu_spec *identify_cpu (unsigned long offset);#endif /* __ASSEMBLY__ */
include/asm-powerpc/system.h +4 -0
@@ -378,7 +378,11 @@ extern unsigned long reloc_offset(void);extern unsigned long add_reloc_offset (unsigned long );extern void reloc_got2 (unsigned long ); +#ifdef CONFIG_PPC64 +#define PTRRELOC (x) x +#else #define PTRRELOC (x) ((typeof(x)) add_reloc_offset((unsigned long)(x))) +#endif static inline void create_instruction (unsigned long addr,unsigned int instr) {
arch/powerpc/platforms/iseries/setup.c +5 -0
@@ -694,6 +694,11 @@ void * __init iSeries_early_setup(void) {unsigned long phys_mem_size; +/* Identify CPU type. This is done again by the common code later +* on but calling this function multiple times is fine. +*/ +identify_cpu (0 ); + powerpc_firmware_features |=FW_FEATURE_ISERIES ; powerpc_firmware_features |=FW_FEATURE_LPAR ;
Quoted 225 lines · On Fri, 13 Oct 2006 18:04:22 +1000 Benjamin Herrenschmidt…
There are currently two versions of the functions for applying the feature fixups, one for CPU features and one for firmware features. In addition, they are both in assembly and with separate implementations for 32 and 64 bits.
identify_cpu()is also implemented in assembly and separately for 32 and 64 bits.This patch replaces them with a pair of C functions. The call sites are slightly moved on ppc64 as well to be called from C instead of from assembly, though it's a very small change, and thus shouldn't cause any problem.
Signed-off-by Benjamin Herrenschmidt <[email protected]>Index:
linux-cell/arch/powerpc/kernel/head_64.S
===================================================================arch/powerpc/kernel/head_64.S +0
-19@@ -1580,11 +1580,6 @@ _STATIC(__start_initialization_iSeries) li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) - LOAD_REG_IMMEDIATE(r3,cpu_specs) - LOAD_REG_IMMEDIATE(r4,cur_cpu_spec) - li r5,0 - bl .identify_cpu - LOAD_REG_IMMEDIATE(r2,__toc_start) addi r2,r2,0x4000 addi r2,r2,0x4000@@ -1964,13 +1959,6 @@ _STATIC(start_here_multiplatform) addi r2,r2,0x4000 add r2,r2,r26 - LOAD_REG_IMMEDIATE(r3, cpu_specs) - add r3,r3,r26 - LOAD_REG_IMMEDIATE(r4,cur_cpu_spec) - add r4,r4,r26 - mr r5,r26 - bl .identify_cpu - /* Do very early kernel initializations, including initial hash table, * stab and slb setup before we turn on relocation. */@@ -2000,13 +1988,6 @@ _STATIC(start_here_common) li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) - /* Apply the CPUs-specific fixups (nop out sections not relevant - * to this CPU - */ - li r3,0 - bl .do_cpu_ftr_fixups - bl .do_fw_ftr_fixups - /* ptr to current */ LOAD_REG_IMMEDIATE(r4, init_task) std r4,PACACURRENT(r13)Index:
linux-cell/arch/powerpc/kernel/misc_64.S
===================================================================arch/powerpc/kernel/misc_64.S +0
-124@@ -246,130 +246,6 @@ _GLOBAL(__flush_dcache_icache) isync blr -/* - * identify_cpu and calls setup_cpu - * In: r3 = base of the cpu_specs array - * r4 = address of cur_cpu_spec - * r5 = relocation offset - */ -_GLOBAL(identify_cpu) - mfpvr r7 -1: - lwz r8,CPU_SPEC_PVR_MASK(r3) - and r8,r8,r7 - lwz r9,CPU_SPEC_PVR_VALUE(r3) - cmplw 0,r9,r8 - beq 1f - addi r3,r3,CPU_SPEC_ENTRY_SIZE - b 1b -1: - sub r0,r3,r5 - std r0,0(r4) - ld r4,CPU_SPEC_SETUP(r3) - cmpdi 0,r4,0 - add r4,r4,r5 - beqlr - ld r4,0(r4) - add r4,r4,r5 - mtctr r4 - /* Calling convention for cpu setup is r3=offset, r4=cur_cpu_spec */ - mr r4,r3 - mr r3,r5 - bctr - -/* - * do_cpu_ftr_fixups - goes through the list of CPU feature fixups - * and writes nop's over sections of code that don't apply for this cpu. - * r3 = data offset (not changed) - */ -_GLOBAL(do_cpu_ftr_fixups) - /* Get CPU 0 features */ - LOAD_REG_IMMEDIATE(r6,cur_cpu_spec) - sub r6,r6,r3 - ld r4,0(r6) - sub r4,r4,r3 - ld r4,CPU_SPEC_FEATURES(r4) - /* Get the fixup table */ - LOAD_REG_IMMEDIATE(r6,__start___ftr_fixup) - sub r6,r6,r3 - LOAD_REG_IMMEDIATE(r7,__stop___ftr_fixup) - sub r7,r7,r3 - /* Do the fixup */ -1: cmpld r6,r7 - bgelr - addi r6,r6,32 - ld r8,-32(r6) /* mask */ - and r8,r8,r4 - ld r9,-24(r6) /* value */ - cmpld r8,r9 - beq 1b - ld r8,-16(r6) /* section begin */ - ld r9,-8(r6) /* section end */ - subf. r9,r8,r9 - beq 1b - /* write nops over the section of code */ - /* todo: if large section, add a branch at the start of it */ - srwi r9,r9,2 - mtctr r9 - sub r8,r8,r3 - lis r0,0x60000000@h /* nop */ -3: stw r0,0(r8) - andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l - beq 2f - dcbst 0,r8 /* suboptimal, but simpler */ - sync - icbi 0,r8 -2: addi r8,r8,4 - bdnz 3b - sync /* additional sync needed on g4 */ - isync - b 1b - -/* - * do_fw_ftr_fixups - goes through the list of firmware feature fixups - * and writes nop's over sections of code that don't apply for this firmware. - * r3 = data offset (not changed) - */ -_GLOBAL(do_fw_ftr_fixups) - /* Get firmware features */ - LOAD_REG_IMMEDIATE(r6,powerpc_firmware_features) - sub r6,r6,r3 - ld r4,0(r6) - /* Get the fixup table */ - LOAD_REG_IMMEDIATE(r6,__start___fw_ftr_fixup) - sub r6,r6,r3 - LOAD_REG_IMMEDIATE(r7,__stop___fw_ftr_fixup) - sub r7,r7,r3 - /* Do the fixup */ -1: cmpld r6,r7 - bgelr - addi r6,r6,32 - ld r8,-32(r6) /* mask */ - and r8,r8,r4 - ld r9,-24(r6) /* value */ - cmpld r8,r9 - beq 1b - ld r8,-16(r6) /* section begin */ - ld r9,-8(r6) /* section end */ - subf. r9,r8,r9 - beq 1b - /* write nops over the section of code */ - /* todo: if large section, add a branch at the start of it */ - srwi r9,r9,2 - mtctr r9 - sub r8,r8,r3 - lis r0,0x60000000@h /* nop */ -3: stw r0,0(r8) -BEGIN_FTR_SECTION - dcbst 0,r8 /* suboptimal, but simpler */ - sync - icbi 0,r8 -END_FTR_SECTION_IFSET(CPU_FTR_SPLIT_ID_CACHE) - addi r8,r8,4 - bdnz 3b - sync /* additional sync needed on g4 */ - isync - b 1b #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) /*Index:
linux-cell/arch/powerpc/kernel/setup-common.c
===================================================================arch/powerpc/kernel/setup-common.c +24
-0@@ -520,3 +520,39 @@ void __init setup_panic(void) {atomic_notifier_chain_register (&panic_notifier_list, &ppc_panic_block); } + +void do_feature_fixups (unsigned long offset,unsigned long value, +void *fixup_start,void *fixup_end) +{ +struct fixup_entry { +unsigned long mask; +unsigned long value; +unsigned int *start; +unsigned int *end; + } *fcur, *fend; + + fcur = fixup_start; + fend = fixup_end; + +for (; fcur < fend; fcur++) { +unsigned int *pstart, *pend, *p; + +if ((value & fcur->mask) == fcur->value) +continue ; + +/* These PTRRELOCs will disappear once the new scheme for +* modules and vdso is implemented +*/ + pstart =PTRRELOC (fcur->start);
arch/powerpc/kernel/setup-common.c void __init setup_panic(void) · line 556
Quoted 10 lines
arch/powerpc/kernel/setup-common.c +10
-0+ pend =PTRRELOC (fcur->end); + +for (p = pstart; p < pend; p++) { + *p =0x60000000u ; + asmvolatile ("dcbst 0, %0" : :"r" (p)); + } + asmvolatile ("sync" : : :"memory" ); +for (p = pstart; p < pend; p++) + asmvolatile ("icbi 0,%0" : :"r" (p)); + asmvolatile ("sync; isync" : : :"memory" );
You can advance the pointer with L1_CACHE_BYTES/sizeof(int) per iteration in the second loop here.
Quoted 261 lines
arch/powerpc/kernel/setup-common.c +2
-0+ } +}Index:
linux-cell/arch/powerpc/kernel/setup.h
===================================================================arch/powerpc/kernel/setup.h +6
-3@@ -1,9 +1,12 @@#ifndef _POWERPC_KERNEL_SETUP_H#define _POWERPC_KERNEL_SETUP_H -void check_for_initrd (void ); -void do_init_bootmem (void ); -void setup_panic (void ); +extern void check_for_initrd (void ); +extern void do_init_bootmem (void ); +extern void setup_panic (void ); +extern void do_feature_fixups (unsigned long offset,unsigned long value, +void *fixup_start,void *fixup_end); +extern int do_early_xmon;#endif /* _POWERPC_KERNEL_SETUP_H */ Index:
linux-cell/arch/powerpc/kernel/setup_32.c
===================================================================arch/powerpc/kernel/setup_32.c +7
-2@@ -90,7 +90,9 @@ int ucache_bsize;*/ unsigned long __init early_init (unsigned long dt_ptr) { +extern unsigned int __start___ftr_fixup, __stop___ftr_fixup;unsigned long offset =reloc_offset (); +struct cpu_spec *spec;/* First zero the BSS -- use memset_io, some platforms don't have * caches on yet */ @@ -100,8 +102,11 @@ unsigned long __init early_init(unsigned* Identify the CPU type and fix up code sections * that depend on which cpu we have. */ -identify_cpu (offset,0 ); -do_cpu_ftr_fixups (offset); + spec =identify_cpu (offset); + +do_feature_fixups (offset, spec->cpu_features, +PTRRELOC (&__start___ftr_fixup), +PTRRELOC (&__stop___ftr_fixup));return KERNELBASE + offset; }Index:
linux-cell/arch/powerpc/kernel/setup_64.c
===================================================================arch/powerpc/kernel/setup_64.c +14
-0@@ -170,6 +170,9 @@ void __init setup_paca(int cpu)void __init early_setup (unsigned long dt_ptr) { +/* Identify CPU type */ +identify_cpu (0 ); +/* Assume we're on cpu 0 for now. Don't write to the paca yet! */ setup_paca (0 );@@ -346,8 +349,19 @@ static void __init initialize_cache_info*/ void __init setup_system (void ) { +extern unsigned int __start___ftr_fixup, __stop___ftr_fixup; +extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup; +DBG (" -> setup_system()\n" ); +/* Apply the CPUs-specific and firmware specific fixups to kernel +* text (nop out sections not relevant to this CPU or this firmware) +*/ +do_feature_fixups (0 , cur_cpu_spec->cpu_features, + &__start___ftr_fixup, &__stop___ftr_fixup); +do_feature_fixups (0 , powerpc_firmware_features, + &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup); +/* * Unflatten the device-tree passed by prom_init or kexec */ Index:
linux-cell/arch/powerpc/kernel/cputable.c
===================================================================arch/powerpc/kernel/cputable.c +23
-1@@ -73,7 +73,7 @@ extern void __restore_cpu_ppc970(void);#define PPC_FEATURE_SPE_COMP 0#endif -struct cpu_spec cpu_specs[] = { +static struct cpu_spec cpu_specs[] = { #ifdef CONFIG_PPC64 { /* Power3 */ .pvr_mask = 0xffff0000,@@ -1152,3 +1152,25 @@ struct cpu_spec cpu_specs[] = {#endif /* !CLASSIC_PPC */ #endif /* CONFIG_PPC32 */ }; + +struct cpu_spec *identify_cpu (unsigned long offset) +{ +struct cpu_spec *s = cpu_specs; +struct cpu_spec **cur = &cur_cpu_spec; +unsigned int pvr =mfspr (SPRN_PVR ); +int i; + + s =PTRRELOC (s); + cur =PTRRELOC (cur); + +if (*cur !=NULL ) +return PTRRELOC (*cur); + +for (i =0 ; i <ARRAY_SIZE (cpu_specs); i++,s++) +if ((pvr & s->pvr_mask) == s->pvr_value) { + *cur = cpu_specs + i; +return s; + } +BUG (); +return NULL ; +}Index:
linux-cell/arch/powerpc/kernel/misc_32.S
===================================================================arch/powerpc/kernel/misc_32.S +0
-74@@ -102,80 +102,6 @@ _GLOBAL(reloc_got2) blr /* - * identify_cpu, - * called with r3 = data offset and r4 = CPU number - * doesn't change r3 - */ -_GLOBAL(identify_cpu) - addis r8,r3,cpu_specs@ha - addi r8,r8,cpu_specs@l - mfpvr r7 -1: - lwz r5,CPU_SPEC_PVR_MASK(r8) - and r5,r5,r7 - lwz r6,CPU_SPEC_PVR_VALUE(r8) - cmplw 0,r6,r5 - beq 1f - addi r8,r8,CPU_SPEC_ENTRY_SIZE - b 1b -1: - addis r6,r3,cur_cpu_spec@ha - addi r6,r6,cur_cpu_spec@l - sub r8,r8,r3 - stw r8,0(r6) - blr - -/* - * do_cpu_ftr_fixups - goes through the list of CPU feature fixups - * and writes nop's over sections of code that don't apply for this cpu. - * r3 = data offset (not changed) - */ -_GLOBAL(do_cpu_ftr_fixups) - /* Get CPU 0 features */ - addis r6,r3,cur_cpu_spec@ha - addi r6,r6,cur_cpu_spec@l - lwz r4,0(r6) - add r4,r4,r3 - lwz r4,CPU_SPEC_FEATURES(r4) - - /* Get the fixup table */ - addis r6,r3,__start___ftr_fixup@ha - addi r6,r6,__start___ftr_fixup@l - addis r7,r3,__stop___ftr_fixup@ha - addi r7,r7,__stop___ftr_fixup@l - - /* Do the fixup */ -1: cmplw 0,r6,r7 - bgelr - addi r6,r6,16 - lwz r8,-16(r6) /* mask */ - and r8,r8,r4 - lwz r9,-12(r6) /* value */ - cmplw 0,r8,r9 - beq 1b - lwz r8,-8(r6) /* section begin */ - lwz r9,-4(r6) /* section end */ - subf. r9,r8,r9 - beq 1b - /* write nops over the section of code */ - /* todo: if large section, add a branch at the start of it */ - srwi r9,r9,2 - mtctr r9 - add r8,r8,r3 - lis r0,0x60000000@h /* nop */ -3: stw r0,0(r8) - andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l - beq 2f - dcbst 0,r8 /* suboptimal, but simpler */ - sync - icbi 0,r8 -2: addi r8,r8,4 - bdnz 3b - sync /* additional sync needed on g4 */ - isync - b 1b - -/* * call_setup_cpu - call the setup_cpu function for this cpu * r3 = data offset, r24 = cpu number *Index:
linux-cell/include/asm-powerpc/cputable.h
===================================================================include/asm-powerpc/cputable.h +1
-2@@ -89,8 +89,7 @@ struct cpu_spec {extern struct cpu_spec *cur_cpu_spec; -extern void identify_cpu (unsigned long offset,unsigned long cpu); -extern void do_cpu_ftr_fixups (unsigned long offset); +extern struct cpu_spec *identify_cpu (unsigned long offset);#endif /* __ASSEMBLY__ */ Index:
linux-cell/include/asm-powerpc/system.h
===================================================================include/asm-powerpc/system.h +4
-0@@ -378,7 +378,11 @@ extern unsigned long reloc_offset(void);extern unsigned long add_reloc_offset (unsigned long );extern void reloc_got2 (unsigned long ); +#ifdef CONFIG_PPC64 +#define PTRRELOC (x) x +#else #define PTRRELOC (x) ((typeof(x)) add_reloc_offset((unsigned long)(x))) +#endif static inline void create_instruction (unsigned long addr,unsigned int instr) {Index:
linux-cell/arch/powerpc/platforms/iseries/setup.c
===================================================================arch/powerpc/platforms/iseries/setup.c +5
-0@@ -694,6 +694,11 @@ void * __init iSeries_early_setup(void) {unsigned long phys_mem_size; +/* Identify CPU type. This is done again by the common code later +* on but calling this function multiple times is fine. +*/ +identify_cpu (0 ); + powerpc_firmware_features |=FW_FEATURE_ISERIES ; powerpc_firmware_features |=FW_FEATURE_LPAR ;_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
Quoted 3 lines
You can advance the pointer with L1_CACHE_BYTES/sizeof(int) per iteration in the second loop here.
Yeah, I suppose so. Though I'm not 100% confident we get L1_CACHE_BYTES on all cpus, for example, PA6T is 64 bytes ;) We could use cur_cpu_spec->icache_bsize but that would involve ugly RELOC's to get it right on 32 bits. I decided not to care for now.
Ben.
Hi Olof,
Quoted 1 line · On Fri, 13 Oct 2006 11:54:57 -0500 Olof Johansson <[email protected]> wrote:
... lots of stuff deleted ...
Could you please trim your replies to just areasonable amount of context, please. You are not the only one who is at fault here, but yours was the example that came my way just as I needed to point out the problem.
--
Cheers,
Stephen Rothwell [email protected]
http://www.canb.auug.org.au/~sfr/
Quoted 9 lines · On Sat, 14 Oct 2006 11:42:59 +1000 Stephen Rothwell <[email protected]>…
Hi Olof,
Quoted 1 line · On Fri, 13 Oct 2006 11:54:57 -0500 Olof Johansson <[email protected]> wrote:
... lots of stuff deleted ...
Could you please trim your replies to just areasonable amount of context, please. You are not the only one who is at fault here, but yours was the example that came my way just as I needed to point out the problem.
I normally try to do it, I think I might have been sloppy lately. Thanks for the reminder.
-Olof
Quoted 8 lines · On Sat, 14 Oct 2006 08:36:46 +1000 Benjamin Herrenschmidt…
Quoted 3 lines
You can advance the pointer with L1_CACHE_BYTES/sizeof(int) per iteration in the second loop here.
Yeah, I suppose so. Though I'm not 100% confident we get
L1_CACHE_BYTESon all cpus, for example, PA6T is 64 bytes ;) We could usecur_cpu_spec->icache_bsizebut that would involve ugly RELOC's to get it right on 32 bits. I decided not to care for now.
Ugh, yeah, I remember this when I did the patches but forgot about it now. L1_CACHE_BYTES is used in a number of places, but overall used as the largest value needed to bump between lines to avoid false sharing.
The other early places seems to have used hardcoded constants. I guess it's better to just loop over every word like you're already doing. It still avoids a barrier on every iteration.
-Olof
Quoted 6 lines · On Fri, 13 Oct 2006 18:04:22 +1000 Benjamin Herrenschmidt…
There are currently two versions of the functions for applying the feature fixups, one for CPU features and one for firmware features. In addition, they are both in assembly and with separate implementations for 32 and 64 bits.
identify_cpu()is also implemented in assembly and separately for 32 and 64 bits.
Quoted 6 lines
This patch replaces them with a pair of C functions. The call sites are slightly moved on ppc64 as well to be called from C instead of from assembly, though it's a very small change, and thus shouldn't cause any problem.
Signed-off-by Benjamin Herrenschmidt <[email protected]>
Quoted 7 lines · Benjamin Herrenschmidt
Index:
linux-cell/include/asm-powerpc/system.h
===================================================================include/asm-powerpc/system.h 2006-10-13 16:24:45.000000000 +1000 renamed from include/asm-powerpc/system.h 2006-10-06 13:48:24.000000000 +1000 +0
-0@@ -378,7 +378,11 @@ extern unsigned long reloc_offset(void); extern unsigned long add_reloc_offset(unsigned long);
include/asm-powerpc/system.h 2006-10-13 16:24:45.000000000 +1000 extern unsigned long reloc_offset(void); · line 388
Quoted 10 lines
include/asm-powerpc/system.h 2006-10-13 16:24:45.000000000 +1000 renamed from include/asm-powerpc/system.h 2006-10-06 13:48:24.000000000 +1000 +4
-0extern void reloc_got2(unsigned long); +#ifdef CONFIG_PPC64 +#define PTRRELOC(x) x +#else #define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x))) +#endif static inline void create_instruction(unsigned long addr, unsigned int instr) {
And of course that bit of the patch is a stupid "optimisation" that breaks prom_init.c on ppc64... I'll post a new patch without it and do more tests (damn, I tested iSeries and figured if it worked there, it would work everywhere :)
Ben.
PATCH 1/5 powerpc: consolidate feature fixup code #2
There are currently two versions of the functions for applying the feature fixups, one for CPU features and one for firmware features. In addition, they are both in assembly and with separate implementations for 32 and 64 bits. identify_cpu() is also implemented in assembly and separately for 32 and 64 bits.
This patch replaces them with a pair of C functions. The call sites are slightly moved on ppc64 as well to be called from C instead of from assembly, though it's a very small change, and thus shouldn't cause any problem.
---
(Minus the bug with PTRRELOC)
arch/powerpc/kernel/head_64.S +0 -19
@@ -1580,11 +1580,6 @@ _STATIC(__start_initialization_iSeries) li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) - LOAD_REG_IMMEDIATE(r3,cpu_specs) - LOAD_REG_IMMEDIATE(r4,cur_cpu_spec) - li r5,0 - bl .identify_cpu - LOAD_REG_IMMEDIATE(r2,__toc_start) addi r2,r2,0x4000 addi r2,r2,0x4000
@@ -1964,13 +1959,6 @@ _STATIC(start_here_multiplatform) addi r2,r2,0x4000 add r2,r2,r26 - LOAD_REG_IMMEDIATE(r3, cpu_specs) - add r3,r3,r26 - LOAD_REG_IMMEDIATE(r4,cur_cpu_spec) - add r4,r4,r26 - mr r5,r26 - bl .identify_cpu - /* Do very early kernel initializations, including initial hash table, * stab and slb setup before we turn on relocation. */
@@ -2000,13 +1988,6 @@ _STATIC(start_here_common) li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) - /* Apply the CPUs-specific fixups (nop out sections not relevant - * to this CPU - */ - li r3,0 - bl .do_cpu_ftr_fixups - bl .do_fw_ftr_fixups - /* ptr to current */ LOAD_REG_IMMEDIATE(r4, init_task) std r4,PACACURRENT(r13)
arch/powerpc/kernel/misc_64.S +0 -124
130 lines not on this page · raw message
arch/powerpc/kernel/setup-common.c +36 -0
@@ -520,3 +520,39 @@ void __init setup_panic(void) {atomic_notifier_chain_register (&panic_notifier_list, &ppc_panic_block); } + +void do_feature_fixups (unsigned long offset,unsigned long value, +void *fixup_start,void *fixup_end) +{ +struct fixup_entry { +unsigned long mask; +unsigned long value; +unsigned int *start; +unsigned int *end; + } *fcur, *fend; + + fcur = fixup_start; + fend = fixup_end; + +for (; fcur < fend; fcur++) { +unsigned int *pstart, *pend, *p; + +if ((value & fcur->mask) == fcur->value) +continue ; + +/* These PTRRELOCs will disappear once the new scheme for +* modules and vdso is implemented +*/ + pstart =PTRRELOC (fcur->start); + pend =PTRRELOC (fcur->end); + +for (p = pstart; p < pend; p++) { + *p =0x60000000u ; + asmvolatile ("dcbst 0, %0" : :"r" (p)); + } + asmvolatile ("sync" : : :"memory" ); +for (p = pstart; p < pend; p++) + asmvolatile ("icbi 0,%0" : :"r" (p)); + asmvolatile ("sync; isync" : : :"memory" ); + } +}
arch/powerpc/kernel/setup.h +6 -3
@@ -1,9 +1,12 @@#ifndef _POWERPC_KERNEL_SETUP_H#define _POWERPC_KERNEL_SETUP_H -void check_for_initrd (void ); -void do_init_bootmem (void ); -void setup_panic (void ); +extern void check_for_initrd (void ); +extern void do_init_bootmem (void ); +extern void setup_panic (void ); +extern void do_feature_fixups (unsigned long offset,unsigned long value, +void *fixup_start,void *fixup_end); +extern int do_early_xmon;#endif /* _POWERPC_KERNEL_SETUP_H */
arch/powerpc/kernel/setup_32.c +7 -2
@@ -90,7 +90,9 @@ int ucache_bsize;*/ unsigned long __init early_init (unsigned long dt_ptr) { +extern unsigned int __start___ftr_fixup, __stop___ftr_fixup;unsigned long offset =reloc_offset (); +struct cpu_spec *spec;/* First zero the BSS -- use memset_io, some platforms don't have * caches on yet */
@@ -100,8 +102,11 @@ unsigned long __init early_init(unsigned* Identify the CPU type and fix up code sections * that depend on which cpu we have. */ -identify_cpu (offset,0 ); -do_cpu_ftr_fixups (offset); + spec =identify_cpu (offset); + +do_feature_fixups (offset, spec->cpu_features, +PTRRELOC (&__start___ftr_fixup), +PTRRELOC (&__stop___ftr_fixup));return KERNELBASE + offset; }
arch/powerpc/kernel/setup_64.c +14 -0
@@ -170,6 +170,9 @@ void __init setup_paca(int cpu)void __init early_setup (unsigned long dt_ptr) { +/* Identify CPU type */ +identify_cpu (0 ); +/* Assume we're on cpu 0 for now. Don't write to the paca yet! */ setup_paca (0 );
@@ -346,8 +349,19 @@ static void __init initialize_cache_info*/ void __init setup_system (void ) { +extern unsigned int __start___ftr_fixup, __stop___ftr_fixup; +extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup; +DBG (" -> setup_system()\n" ); +/* Apply the CPUs-specific and firmware specific fixups to kernel +* text (nop out sections not relevant to this CPU or this firmware) +*/ +do_feature_fixups (0 , cur_cpu_spec->cpu_features, + &__start___ftr_fixup, &__stop___ftr_fixup); +do_feature_fixups (0 , powerpc_firmware_features, + &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup); +/* * Unflatten the device-tree passed by prom_init or kexec */
arch/powerpc/kernel/cputable.c +23 -1
@@ -73,7 +73,7 @@ extern void __restore_cpu_ppc970(void);#define PPC_FEATURE_SPE_COMP 0#endif -struct cpu_spec cpu_specs[] = { +static struct cpu_spec cpu_specs[] = { #ifdef CONFIG_PPC64 { /* Power3 */ .pvr_mask = 0xffff0000,
@@ -1152,3 +1152,25 @@ struct cpu_spec cpu_specs[] = {#endif /* !CLASSIC_PPC */ #endif /* CONFIG_PPC32 */ }; + +struct cpu_spec *identify_cpu (unsigned long offset) +{ +struct cpu_spec *s = cpu_specs; +struct cpu_spec **cur = &cur_cpu_spec; +unsigned int pvr =mfspr (SPRN_PVR ); +int i; + + s =PTRRELOC (s); + cur =PTRRELOC (cur); + +if (*cur !=NULL ) +return PTRRELOC (*cur); + +for (i =0 ; i <ARRAY_SIZE (cpu_specs); i++,s++) +if ((pvr & s->pvr_mask) == s->pvr_value) { + *cur = cpu_specs + i; +return s; + } +BUG (); +return NULL ; +}
arch/powerpc/kernel/misc_32.S +0 -74
80 lines not on this page · raw message
include/asm-powerpc/cputable.h +1 -2
@@ -89,8 +89,7 @@ struct cpu_spec {extern struct cpu_spec *cur_cpu_spec; -extern void identify_cpu (unsigned long offset,unsigned long cpu); -extern void do_cpu_ftr_fixups (unsigned long offset); +extern struct cpu_spec *identify_cpu (unsigned long offset);#endif /* __ASSEMBLY__ */
arch/powerpc/platforms/iseries/setup.c +5 -0
@@ -694,6 +694,11 @@ void * __init iSeries_early_setup(void) {unsigned long phys_mem_size; +/* Identify CPU type. This is done again by the common code later +* on but calling this function multiple times is fine. +*/ +identify_cpu (0 ); + powerpc_firmware_features |=FW_FEATURE_ISERIES ; powerpc_firmware_features |=FW_FEATURE_LPAR ;