Skip to contentSkip to conversation

Finish up support for the ATSTK1000/ATSTK1002 boards

PATCH New Haavard Skinnemoen 2 participants 2 messages Oct 25, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Finish up support for the ATSTK1000/ATSTK1002 boards

Add atstk1002_config target to Makefile and move the AVR32 section down below Blackfin so that it doesn't end up in the middle of MIPS.

Drop the autogenerated linker script thing for now. Will have to revisit how to handle chips with different flash and RAM layout later.

---

NOTE: This patch will only work when using the git tools, i.e. git-apply, git-am or git-applymbox due to the rename detection (which makes the patch much smaller and nicer.)

Please let me know if you want me to create a proper non-git patch as well.

 Makefile                                           |   17 ++++++++++-------
 board/atmel/atstk1000/{u-boot.lds.S => u-boot.lds} |   10 ++++------
 2 files changed, 14 insertions(+), 13 deletions(-)
Makefile +10 -7
index dec6355..c2e47d4 100644
@@ -2122,13 +2122,6 @@ pb1000_config		: 	unconfig
 	@echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h
 	@$(MKCONFIG) -a pb1x00 mips mips pb1x00
 
-#========================================================================
-# AVR32
-#========================================================================
-#########################################################################
-## AT32AP7xxx
-#########################################################################
-
 #########################################################################
 ## MIPS64 5Kc
 #########################################################################
@@ -2248,6 +2241,16 @@ stamp_config	:	unconfig
 dspstamp_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) blackfin bf533 dsp_stamp
 
+#========================================================================
+# AVR32
+#========================================================================
+#########################################################################
+## AT32AP7xxx
+#########################################################################
+
+atstk1002_config	:	unconfig
+	@./mkconfig $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
+
 #########################################################################
 #########################################################################
 #########################################################################
board/atmel/atstk1000/u-boot.lds renamed from board/atmel/atstk1000/u-boot.lds.S +4 -6
similarity index 93%
rename from board/atmel/atstk1000/u-boot.lds.S
rename to board/atmel/atstk1000/u-boot.lds
index d46b82c..ef89ea4 100644
@@ -20,27 +20,25 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-#include <config.h>
-
 OUTPUT_FORMAT("elf32-avr32", "elf32-avr32", "elf32-avr32")
 OUTPUT_ARCH(avr32)
 ENTRY(_start)
 
 SECTIONS
 {
-	. = CFG_FLASH_BASE;
+	. = 0;
 	_text = .;
 	.text : {
 		*(.text)
 		*(.text.*)
 	}
 
-	. = ALIGN(CFG_ICACHE_LINESZ);
+	. = ALIGN(32);
 	__flashprog_start = .;
 	.flashprog : {
 		*(.flashprog)
 	}
-	. = ALIGN(CFG_ICACHE_LINESZ);
+	. = ALIGN(32);
 	__flashprog_end = .;
 
 	. = ALIGN(8);
@@ -51,7 +49,7 @@ SECTIONS
 	_etext = .;
 
 	__data_lma = ALIGN(8);
-	. = CFG_INTRAM_BASE;
+	. = 0x24000000;
 	_data = .;
 	.data : AT(__data_lma) {
 		*(.data)
Signature · 1 line
1.4.1.1
#1 lore raw

PATCH 1/1 Finish up support for the ATSTK1000/ATSTK1002 boards

Quoted 9 lines · In message <[email protected]> you wrote:

Add atstk1002_config target to Makefile and move the AVR32 section down below Blackfin so that it doesn't end up in the middle of MIPS.

Drop the autogenerated linker script thing for now. Will have to revisit how to handle chips with different flash and RAM layout later.

Applied.

Quoted 2 lines

Please let me know if you want me to create a proper non-git patch as well.

git patches are perfectly fine.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The last thing one knows in constructing a work is what to put first.
- Blaise Pascal