Skip to contentSkip to conversation

: mpc7448hpc2 pci f [...]

PATCH New DENX Support System 1 participant 1 message Nov 2, 2006

lore
Share & tools
lore
#0 lore raw

PATCH v3 8/10 : mpc7448hpc2 pci f [...]

Hello list,

inside the automatic U-Boot patch tracking system a new ticket [DNX#2006110242000109] was created:

<snip>

Quoted 90 lines

Tsi108 on chip pci controller support.

If there is no pci card, the tsi108/109 pci configure read will cause a machine check exception to the processor. PCI error should also be cleared after the read.

---
 drivers/tsi108_pci.c |  178
++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 178 insertions(+), 0 deletions(-)
drivers/tsi108_pci.c new file +44 -0
new file mode 100644
index 0000000..f374ede
@@ -0,0 +1,178 @@
+/*
+ * (C) Copyright 2004 Tundra Semiconductor Corp.
+ * Alex Bounine <[email protected]>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * PCI initialisation for the Tsi108 EMU board.
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_TSI108_PCI
+
+#include <common.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <tsi108.h>
+
+struct pci_controller local_hose;
+
+void tsi108_clear_pci_error(void)
+{
+	u32 err_stat, err_addr, pci_stat;
+
+	/*
+	 * Quietly clear errors signalled as result of PCI/X configuration

read

drivers/tsi108_pci.c new file +25 -0
+	 * requests.
+	 */
+	/* Read PB Error Log Registers */
+	err_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+				     TSI108_PB_REG_OFFSET + PB_ERRCS);
+	err_addr = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+				     TSI108_PB_REG_OFFSET + PB_AERR);
+	if (err_stat & PB_ERRCS_ES) {
+		/* Clear PCI/X bus errors if applicable */
+		if ((err_addr & 0xFF000000) == CFG_PCI_CFG_BASE) {
+			/* Clear error flag */
+			*(u32 *) (CFG_TSI108_CSR_BASE +
+				  TSI108_PB_REG_OFFSET + PB_ERRCS) =
+			    PB_ERRCS_ES;
+
+			/* Clear read error reported in PB_ISR */
+			*(u32 *) (CFG_TSI108_CSR_BASE +
+				  TSI108_PB_REG_OFFSET + PB_ISR) =
+			    PB_ISR_PBS_RD_ERR;
+
+		/* Clear errors reported by PCI CSR (Normally Master Abort) */
+			pci_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+						     TSI108_PCI_REG_OFFSET +
+						     PCI_CSR);
+			*(volatile u32 *)(CFG_TSI108_CSR_BASE +

drivers/tsi108_pci.c

Quoted 10 lines
drivers/tsi108_pci.c new file +10 -0
+					  TSI108_PCI_REG_OFFSET + PCI_CSR) =
+			    pci_stat;
+
+			*(volatile u32 *)(CFG_TSI108_CSR_BASE +
+					  TSI108_PCI_REG_OFFSET +
+					  PCI_IRP_STAT) = PCI_IRP_STAT_P_CSR;
+		}
+	}
+
+	return;

</snip>

Your U-Boot support team