: Fix 2nd ifup failure on 5752M.
Subsystems (2)
[TG3]: Fix 2nd ifup failure on 5752M.
This fixes a bug reported in:
http://bugzilla.kernel.org/show_bug.cgi?id=7438
tg3_close() turns off the PHY if WoL and ASF are both disabled. On the next tg3_open(), some devices such as the 5752M will not be brought up correctly without a PHY reset early in the reset sequence. The PHY clock is needed for some internal MAC blocks to function correctly.
This problem is fixed by always resetting the PHY early in tg3_reset_hw() when it is called from tg3_open() or tg3_resume(). tg3_setup_phy() can then be called later in the sequence without the reset_phy parameter set to 1, since the PHY reset is already done.
Update version to 3.68.
drivers/net/tg3.c +4 -4
@@ -68,8 +68,8 @@ #include "tg3.h"#define DRV_MODULE_NAME "tg3"#define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.67" -#define DRV_MODULE_RELDATE "October 18, 2006" +#define DRV_MODULE_VERSION "3.68" +#define DRV_MODULE_RELDATE "November 02, 2006"#define TG3_DEF_MAC_MODE 0#define TG3_DEF_RX_MODE 0
@@ -6014,7 +6014,7 @@ static int tg3_reset_hw(struct tg3 *tp,tg3_abort_hw (tp,1 ); } -if ((tp->tg3_flags2 &TG3_FLG2_MII_SERDES ) && reset_phy) +if (reset_phy)tg3_phy_reset (tp); err =tg3_chip_reset (tp);
@@ -6574,7 +6574,7 @@ #endiftw32 (GRC_LOCAL_CTRL , tp->grc_local_ctrl); } - err =tg3_setup_phy (tp, reset_phy); + err =tg3_setup_phy (tp,0 );if (err)return err;
From: "Michael Chan" <[email protected]>
Date: Thu, 02 Nov 2006 13:02:29 -0800
Quoted 12 lines
[TG3]: Fix 2nd ifup failure on 5752M.
This fixes a bug reported in:
http://bugzilla.kernel.org/show_bug.cgi?id=7438
tg3_close()turns off the PHY if WoL and ASF are both disabled. On the nexttg3_open(), some devices such as the 5752M will not be brought up correctly without a PHY reset early in the reset sequence. The PHY clock is needed for some internal MAC blocks to function correctly.
Quoted 8 lines
This problem is fixed by always resetting the PHY early in
tg3_reset_hw()when it is called fromtg3_open()ortg3_resume().tg3_setup_phy()can then be called later in the sequence without thereset_phyparameter set to 1, since the PHY reset is already done.Update version to 3.68.
Signed-off-by Michael Chan <[email protected]>
Applied, thanks a lot Michael.