board_nand_init
Hi,all
I am trying to run u-boot-1.1.5 on my s3c2410_board,which has 32M SDRAM
and 64M NAND flash.i have enabled the CFG_CMD_NAND flag.when i make the src the compiler report this
"drivers/nand/libnand.a(nand.o): In function `nand_init':/home/code/arm/u-boot-1.1.5/drivers/nand/nand.c:50: undefined reference to `board_nand_init'
"
my problem is if i should init all functions and variables in the nand_chip struct? if not what's my job in the board_nand_init?
This message has been scanned for viruses and spam by CVICSE_mail_gate!
Quoted 9 lines · Bill Tang
I am trying to run u-boot-1.1.5 on my s3c2410_board,which has 32M SDRAM
and 64M NAND flash.i have enabled theCFG_CMD_NANDflag.when i make the src the compiler report this
"drivers/nand/libnand.a(nand.o): In function `nand_init':/home/code/arm/u-boot-1.1.5/drivers/nand/nand.c:50: undefined reference to `board_nand_init'
"
my problem is if i should init all functions and variables in thenand_chipstruct? if not what's my job in theboard_nand_init?
You need to implement a board (or cpu) specific init function called "board_nand_init()" to init all functions and variables in the nand_chip struct. Take a look at cpu/ppc4xx/ndfc.c or board/prodrive/pdnb3/nand.c how this can be done.
Best regards,
Stefan