Cheap USB audio card with phantom
Quoted 3 lines
I am looking for a cheap two channels USB audio card, with two XLR entries and preamp. This is for an Internet Podcast. Of course, I need good Alsa support.
I lost hours connecting on Websites to look for information. Can anyone help me, this would be very nice.
Is there a single fully-supported card answering my needs?
Thank you in advance,
Jean-Michel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
Quoted 3 lines · Jean-Michel Pouré
Quoted 3 lines
I am looking for a cheap two channels USB audio card, with two XLR entries and preamp. This is for an Internet Podcast. Of course, I need good Alsa support.
Not sure what you want-- that may be why you get no response. By two
channels in, do you mean a single stereo channel in? What do you mean by
"two xlr entries" or "preamp"? sound cards tend not to be mixer boards, and especially not cheap mixer boards. Why not buy a cheap usb soundcard (I
like the maudio transit-- under $100-- it has a standard stereo in) and add a preamp if that is really what you need.
Why do you need XLR connectors and a preamp for Internet Podcast?
Quoted 20 lines
I lost hours connecting on Websites to look for information. Can anyone help me, this would be very nice.
Is there a single fully-supported card answering my needs?
Thank you in advance,
Jean-Michel-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
Signature · 4 lines
William G. Unruh | Canadian Institute for| Tel: +1(604)822-3273 Physics&Astronomy | Advanced Research | Fax: +1(604)822-5324 UBC, Vancouver,BC | Program in Cosmology | [email protected] Canada V6T 1Z1 | and Gravity | www.theory.physics.ubc.ca/
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 10 lines · Bill Unruh
Quoted 3 lines · Jean-Michel Pouré
Quoted 3 lines
I am looking for a cheap two channels USB audio card, with two XLR entries and preamp. This is for an Internet Podcast. Of course, I need good Alsa support.
Not sure what you want-- that may be why you get no response. By two channels in, do you mean a single stereo channel in? What do you mean by "two xlr entries" or "preamp"? sound cards tend not to be mixer boards, and especially not cheap mixer boards.
Well, a USB audio interface hardly qualifies as a sound card, either. There are quite a few USB and Firewire interfaces that have preamps with XLR inputs, largely because that's what microphones (in a broadcast or recording context) use.
Finding such a device that works with Linux could be a challenge though. I got the impression from a quick look at the M-Audio web site that most of their USB devices listed on the ALSA matrix have been discontinued. Is a Firewire device with jackd and libfreebob not an option?
John
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
Quoted 3 lines · On Sat, 27 Jan 2007 22:15:31 +0100 Jean-Michel Pouré <[email protected]> wrote:
Quoted 3 lines
I am looking for a cheap two channels USB audio card, with two XLR entries and preamp. This is for an Internet Podcast. Of course, I need good Alsa support.
I have an Edirol UA-25. I don't know if it's fully supported, but as far as I can tell, it works perfectly. It records and plays in all the bitrates etc. it's supposed to, and the MIDI interface works as well.
That doesn't mean that every Linux program works well with it, since some of them e.g. Audacity seems to assume that it should have mixer controls, which it doesn't have, since those are on the box. But I've used it with Jack, Ardour and Rosegarden without any problems at all.
I've also tested the M-Audio MobilePre, and it also seemed to work well. It has mixer controls and knobs on the box, which is kind of confusing. I haven't tested it a lot though. There's some info about needing to load firmware to the MobilePre, but I didn't need to do that. I think they come in different versions without changing the name. But there is a firmware loader for it if it's needed, but if they keep changing it without letting people know about it, I wouldn't bet on buying one without testing it first.
Quoted 10 lines
I lost hours connecting on Websites to look for information. Can anyone help me, this would be very nice.
Is there a single fully-supported card answering my needs?
Thank you in advance,
Jean-Michel
Quoted 9 lines
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Thank you for your answers:
Quoted 11 lines
Not sure what you want-- that may be why you get no response. By two channels in, do you mean a single stereo channel in? What do you mean by
"two xlr entries" or "preamp"? sound cards tend not to be mixer boards, and
especially not cheap mixer boards. Why not buy a cheap usb soundcard (I
like the maudio transit-- under $100-- it has a standard stereo in) and add a preamp if that is really
what you need.
Quoted 1 line
Why do you need XLR connectors and a preamp for Internet Podcast?
I need a professionnal voice microphone, like in a normal radio. Therefore, I need XLR entries.
Quoted 4 lines
I have an Edirol UA-25. I don't know if it's fully supported, but as far
as I can tell, it works perfectly. It records and plays in all the bitrates etc.
Quoted 8 lines
it's supposed to, and the MIDI interface works as well. That doesn't mean that every Linux program works well with it, since some of them
e.g. Audacity seems to assume that it should have mixer controls, which
it doesn't have, since those are on the box. But I've used it with Jack, Ardour and
Rosegarden without any problems at all.
I phone people using SIP protocol.
The SIP phone (Twinkle) needs a mixer.
At the same time, I record my voice at high rate.
Then I mix the result in Audacity, but I will soon switch to Ardour.
This is only ONE need, I have other needs ...
I also produce short films shot in DV.
I need to record voices with good quality.
Quoted 5 lines
I've also tested the M-Audio MobilePre, and it also seemed to work well. It has
mixer controls and knobs on the box, which is kind of confusing. I haven't tested
it a lot though. There's some info about needing to load firmware to
Quoted 9 lines
the MobilePre,
but I didn't need to do that. I think they come in different versions without
changing the name. But there is a firmware loader for it if it's needed, but
if they keep changing it without letting people know about it, I wouldn't
bet on buying one without testing it first.
Th M-audio Pre is a suitable solution.
I was wondering about the new TASCAM US-122L.
It is very cheap (159 €) and quite popular.
Do you think it is supported by Alsa?
More generaly, are there established standards in audio? What are theses acronyms: ASIO, ASIO2, GSIF2, WDM, CoreAudio, CoreMIDI, kernel streaming, etc...
I will create a page on the unofficial Alsa wiki.
Quoted 6 lines
Well, a USB audio interface hardly qualifies as a sound card, either. There are quite a few USB and Firewire interfaces that have preamps with XLR inputs, largely because that's what microphones (in a broadcast
or recording context) use.
Quoted 6 lines
Finding such a device that works with Linux could be a challenge though.
I got the impression from a quick look at the M-Audio web site that most of their USB devices listed on the ALSA matrix have been discontinued. Is a Firewire device with jackd and libfreebob not an option?
If there is a cheap (< 200€) Firewire card with two XLR entries, please let me know. I am interested.
Kind regards,
Jean-Michel Pouré
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-user
Quoted 10 lines · Jean-Michel Pouré
Quoted 6 lines
Finding such a device that works with Linux could be a challenge though.
I got the impression from a quick look at the M-Audio web site that most of their USB devices listed on the ALSA matrix have been discontinued. Is a Firewire device with jackd and libfreebob not an option?If there is a cheap (< 200€) Firewire card with two XLR entries, please let me know. I am interested.
I don't think we can at this moment deliver what you want with FreeBoB. The ALSA support is not ready yet.
Pieter Palmers
FreeBoB developer
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 4 lines
Quoted 1 line
Why do you need XLR connectors and a preamp for Internet Podcast?
I need a professionnal voice microphone, like in a normal radio. Therefore, I need XLR entries.
<disclaimer>
I'm not trying to be picky, just precise.
</disclaimer>
Whether or not a mic is "a professionnal voice microphone" has nothing to do with it having XLR plugs or something else as such (you can have them with "normal" stereo plugs as well from a "quality of signal" POV). Many such microphones allow you to choose the plug, or at least that is the result of scanning my own mics.
However I do agree that most higher quality mics I have come across are equipped with XLR plugs by default (though they can be refitted) which makes XLR kind of the canonical choice in studio environments.
[recording sip phone and for DV video]
Quoted 1 line
I need to record voices with good quality.
From this I deduce you don't require long cables with your mic which implies you don't need balanced cables (at all cost).
Nothing wrong with using XLR, but from what you write not a "must have" type of requirement.
Quoted 3 lines
More generaly, are there established standards in audio? What are theses acronyms: ASIO, ASIO2, GSIF2, WDM, CoreAudio, CoreMIDI, kernel streaming, etc...
Have you tried google and/or wikipedia ?
Best,
Michael
Signature · 3 lines
Vote against SPAM - see http://www.politik-digital.de/spam/ Michael Gerdau email: [email protected] GPG-keys available on request or at public keyserver
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 3 lines · Michael Gerdau
Nothing wrong with using XLR, but from what you write not a "must have"
type of requirement.
I record my voice at high quality (outgoing) and record the SIP voice (incoming) with low quality.
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
Quoted 7 lines · Michael Gerdau
Quoted 1 line
I need to record voices with good quality.
From this I deduce you don't require long cables with your mic which implies you don't need balanced cables (at all cost).
Nothing wrong with using XLR, but from what you write not a "must have" type of requirement.
Any mic that needs 48V phantom power needs a balanced cable in order to work. XLR inputs are the de facto standard on phantom capable mic preamps.
John
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
Quoted 4 lines · John Rigg
Finding such a device that works with Linux could be a challenge though. I got the impression from a quick look at the M-Audio web site that most of their USB devices listed on the ALSA matrix have been discontinued.
In theory, every USB device that is class compliant should work out of the box.
The ALSA soundcard matrix is pretty much out of date, it seems to be not maintained anymore.
Matthias
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
Quoted 6 lines · Jean-Michel Pouré
Quoted 3 lines · Matthias Koenig
In theory, every USB device that is class compliant should work out of the box.
How can I know if a USB card is USB device compliant?
Well, it *should* be stated by the vendor.
Take e.g. the M-Audio Fast Track Pro device:
On the webpage
http://www.m-audio.com/products/en_us/FastTrackPro-main.html
you can find the following:
I/O Bit Depth Sample Rate (kHz)
With Drivers 4 x 4 16 44.1/48
2 x 4 24 44.1/48
2-in OR 2-out 24 88.2/96
Class compliant 2x4 16 44.1/48
means the device is only class compliant for the 2x4 mode with 16 bits and 44.1/48 kHz.
If you can not find such information on the product page, you will have to ask the vendor (or just try it :-)
Quoted 2 lines
For example, when it is written "MacOsX compliant", does it mean there are chances that the device is supported?
This could mean anything, one step to find out is to check if there are separate drivers needed for OSX. If not, there are chances that it's class compliant, but this is only a hint. You'll have to double check this.
Matthias
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel