Skip to contentSkip to conversation

2.6.20-rc6 SCSI error: I/O error - trouble with mass storage devices ?!

linux-usb-devel Alan Stern 3 participants 3 messages Jan 30, 2007 – Feb 1, 2007 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore

Alan Stern

author maintainer
#1 lore raw
In reply to a message not in the archive
Quoted 7 lines · Soeren Sonnenburg

Dear all,

I am trying to use a P990 phone in via mass storage under linux. I was able to copy data to/from the phone without trouble under winxp but receive millions of I/O errors (see below (*), basically on any sector). As this was also happening on a casio camera (and working on winxp) I tried a couple of things to nail this down:

...

Quoted 3 lines

4) I enabled usb mass storage verbose debug output and collected 2 runs of I/O once with the sandisk and one with the P990 (attached as sandisk and p990)

...

Quoted 3 lines

Now I am clueless what could have gone wrong (as I *think* this was all working at some point at least before firmware updates) and what the difference between these mass storage devices is.

The log revealed that the phone's firmware returns garbage values in the Residue field for some WRITEs. This patch should take care of it.

Alan Stern

drivers/usb/storage/unusual_devs.h +3 -2
Index: usb-2.6/drivers/usb/storage/unusual_devs.h
===================================================================
@@ -1318,12 +1318,13 @@ UNUSUAL_DEV(  0x0fce, 0xe031, 0x0000, 0x
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
-/* Reported by Jan Mate <[email protected]> */
+/* Reported by Jan Mate <[email protected]>
+ * and by Soeren Sonnenburg <[email protected]> */
 UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
 		"Sony Ericsson",
 		"P990i",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_FIX_CAPACITY ),
+		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Kevin Cernekee <[email protected]>
  * Tested on hardware version 1.10.
#2 lore raw
Quoted 1 line · Alan Stern

On Sat, 27 Jan 2007, Soeren Sonnenburg wrote:

[P990 mass storage trouble]

Quoted 6 lines
Quoted 3 lines

Now I am clueless what could have gone wrong (as I *think* this was all working at some point at least before firmware updates) and what the difference between these mass storage devices is.

The log revealed that the phone's firmware returns garbage values in the Residue field for some WRITEs. This patch should take care of it.

I can confirm that this fixes the problem.

Thank you *very* much - you've made my day.

Soeren

Signature · 2 lines
Sometimes, there's a moment as you're waking, when you become aware of
the real world around you, but you're still dreaming.
#3 lore raw
In reply to Alan Stern
Quoted 39 lines · On Tue, 30 Jan 2007 13:08:19 -0500 (EST) Alan Stern…
Quoted 7 lines · Soeren Sonnenburg

Dear all,

I am trying to use a P990 phone in via mass storage under linux. I was able to copy data to/from the phone without trouble under winxp but receive millions of I/O errors (see below (*), basically on any sector). As this was also happening on a casio camera (and working on winxp) I tried a couple of things to nail this down:

...

Quoted 3 lines

4) I enabled usb mass storage verbose debug output and collected 2 runs of I/O once with the sandisk and one with the P990 (attached as sandisk and p990)

...

Quoted 3 lines

Now I am clueless what could have gone wrong (as I *think* this was all working at some point at least before firmware updates) and what the difference between these mass storage devices is.

The log revealed that the phone's firmware returns garbage values in the Residue field for some WRITEs. This patch should take care of it.

Alan Stern

Index: usb-2.6/drivers/usb/storage/unusual_devs.h
===================================================================

drivers/usb/storage/unusual_devs.h +1 -1
@@ -1318,12 +1318,13 @@ UNUSUAL_DEV(  0x0fce, 0xe031, 0x0000, 0x
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
-/* Reported by Jan Mate <[email protected]> */
+/* Reported by Jan Mate <[email protected]>

drivers/usb/storage/unusual_devs.h UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x · line 1330

Quoted 10 lines
drivers/usb/storage/unusual_devs.h +2 -1
+ * and by Soeren Sonnenburg <[email protected]> */
 UNUSUAL_DEV(  0x0fce, 0xe030, 0x0000, 0x0000,
 		"Sony Ericsson",
 		"P990i",
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
-		US_FL_FIX_CAPACITY ),
+		US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
 
 /* Reported by Kevin Cernekee <[email protected]>
  * Tested on hardware version 1.10.

This fixes the phone, but what's the situation with that Casio camera?