: PHY workaround for 5709 A0.
Subsystems (2)
[BNX2]: PHY workaround for 5709 A0.
5709 A0 copper devices will not link up with some link partners without this workaround.
Update driver to 1.5.5.
Signed-off-by Michael Chan <[email protected]>
drivers/net/bnx2.c +12 -2
@@ -57,8 +57,8 @@#define DRV_MODULE_NAME "bnx2"#define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "1.5.4" -#define DRV_MODULE_RELDATE "January 24, 2007" +#define DRV_MODULE_VERSION "1.5.5" +#define DRV_MODULE_RELDATE "February 1, 2007"#define RUN_AT (x) (jiffies + (x))
@@ -1356,6 +1356,14 @@ bnx2_init_copper_phy(struct bnx2 *bp)bnx2_write_phy (bp,0x18 ,0x0400 ); } +if (bp->phy_flags &PHY_DIS_EARLY_DAC_FLAG ) { +bnx2_write_phy (bp,MII_BNX2_DSP_ADDRESS , +MII_BNX2_DSP_EXPAND_REG |0x8 ); +bnx2_read_phy (bp,MII_BNX2_DSP_RW_PORT , &val); + val &= ~(1 <<8 ); +bnx2_write_phy (bp,MII_BNX2_DSP_RW_PORT , val); + } +if (bp->dev->mtu >1500 ) {/* Set extended packet length bit */ bnx2_write_phy (bp,0x18 ,0x7 );
@@ -5918,6 +5926,8 @@ bnx2_init_board(struct pci_dev *pdev, st }else if (CHIP_NUM (bp) ==CHIP_NUM_5706 ||CHIP_NUM (bp) ==CHIP_NUM_5708 ) bp->phy_flags |=PHY_CRC_FIX_FLAG ; +else if (CHIP_ID (bp) ==CHIP_ID_5709_A0 ) + bp->phy_flags |=PHY_DIS_EARLY_DAC_FLAG ; if ((CHIP_ID(bp) == CHIP_ID_5708_A0) || (CHIP_ID(bp) == CHIP_ID_5708_B0) ||
drivers/net/bnx2.h +6 -0
@@ -6288,6 +6288,10 @@ struct l2_fhdr {#define BCM5708S_TX_ACTL3 0x17 +#define MII_BNX2_DSP_RW_PORT 0x15 +#define MII_BNX2_DSP_ADDRESS 0x17 +#define MII_BNX2_DSP_EXPAND_REG 0x0f00 +#define MIN_ETHERNET_PACKET_SIZE 60#define MAX_ETHERNET_PACKET_SIZE 1514#define MAX_ETHERNET_JUMBO_PACKET_SIZE 9014
@@ -6489,6 +6493,7 @@ struct bnx2 {#define PHY_INT_MODE_MASK_FLAG 0x300#define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100#define PHY_INT_MODE_LINK_READY_FLAG 0x200 +#define PHY_DIS_EARLY_DAC_FLAG 0x400u32 chip_id;/* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
@@ -6512,6 +6517,7 @@ struct bnx2 {#define CHIP_ID_5708_A0 0x57080000#define CHIP_ID_5708_B0 0x57081000#define CHIP_ID_5708_B1 0x57081010 +#define CHIP_ID_5709_A0 0x57090000#define CHIP_BOND_ID (bp) (((bp)->chip_id) & 0xf)
From: "Michael Chan" <[email protected]>
Date: Thu, 01 Feb 2007 10:47:58 -0800
Quoted 8 lines
[BNX2]: PHY workaround for 5709 A0.
5709 A0 copper devices will not link up with some link partners without this workaround.
Update driver to 1.5.5.
Signed-off-by Michael Chan <[email protected]>
Applied, thanks Michael.