: Use lower DMA watermark for 5703.
Subsystems (2)
PATCH 2/8 : Use lower DMA watermark for 5703.
[TG3]: Use lower DMA watermark for 5703.
Set DMA read watermark to 4 on 5703 in PCIX mode. This is needed to prevent some tx timeouts.
Signed-off-by Michael Chan <[email protected]>
drivers/net/tg3.c +7 -1
@@ -11314,6 +11314,7 @@ static int __devinit tg3_test_dma(structif (GET_ASIC_REV (tp->pci_chip_rev_id) ==ASIC_REV_5703 ||GET_ASIC_REV (tp->pci_chip_rev_id) ==ASIC_REV_5704 ) {u32 ccval = (tr32 (TG3PCI_CLOCK_CTRL ) &0x1f ); +u32 read_water =0x7 ;/* If the 5704 is behind the EPB bridge, we can * do the less restrictive ONE_DMA workaround for
@@ -11325,8 +11326,13 @@ static int __devinit tg3_test_dma(structelse if (ccval ==0x6 || ccval ==0x7 ) tp->dma_rwctrl |=DMA_RWCTRL_ONE_DMA ; +if (GET_ASIC_REV (tp->pci_chip_rev_id) ==ASIC_REV_5703 ) + read_water =4 ;/* Set bit 23 to enable PCIX hw bug fix */ - tp->dma_rwctrl |=0x009f0000 ; + tp->dma_rwctrl |= + (read_water <<DMA_RWCTRL_READ_WATER_SHIFT ) | + (0x3 <<DMA_RWCTRL_WRITE_WATER_SHIFT ) | + (1 <<23 ); }else if (GET_ASIC_REV (tp->pci_chip_rev_id) ==ASIC_REV_5780 ) {/* 5780 always in PCIX mode */ tp->dma_rwctrl |=0x00144000 ;
Quoted 6 lines · Michael Chan
[TG3]: Use lower DMA watermark for 5703.
Set DMA read watermark to 4 on 5703 in PCIX mode. This is needed to prevent some tx timeouts.
Signed-off-by Michael Chan <[email protected]>
ACK patches 2-8
From: "Michael Chan" <[email protected]>
Date: Tue, 13 Feb 2007 12:14:01 -0800
Quoted 6 lines
[TG3]: Use lower DMA watermark for 5703.
Set DMA read watermark to 4 on 5703 in PCIX mode. This is needed to prevent some tx timeouts.
Signed-off-by Michael Chan <[email protected]>
Applied.