Patch1:replace pci_find_device in avm_pci.c

index b04a178..29f4802 100644
@@ -789,19 +789,19 @@ setup_avm_pcipnp(struct IsdnCard *card)
 	}
 #endif
 #ifdef CONFIG_PCI
-	if ((dev_avm = pci_find_device(PCI_VENDOR_ID_AVM,
+	if ((dev_avm = pci_get_device(PCI_VENDOR_ID_AVM,
 		PCI_DEVICE_ID_AVM_A1,  dev_avm))) {
 		if (pci_enable_device(dev_avm))
-			return(0);
+			goto dev_avm_cleanup;
 		cs->irq = dev_avm->irq;
 		if (!cs->irq) {
 			printk(KERN_ERR "FritzPCI: No IRQ for PCI card found\n");
-			return(0);
+			goto dev_avm_cleanup;
 		}
 		cs->hw.avm.cfg_reg = pci_resource_start(dev_avm, 1);
 		if (!cs->hw.avm.cfg_reg) {
 			printk(KERN_ERR "FritzPCI: No IO-Adr for PCI card found\n");
-			return(0);
+			goto dev_avm_cleanup;
 		}
 		cs->subtyp = AVM_FRITZ_PCI;
 	} else {

@@ -822,7 +822,7 @@ ready:
 		       CardType[card->typ],
 		       cs->hw.avm.cfg_reg,
 		       cs->hw.avm.cfg_reg + 31);
-		return (0);
+		goto dev_avm_cleanup;
 	}
 	switch (cs->subtyp) {
 	  case AVM_FRITZ_PCI:

@@ -841,8 +841,8 @@ ready:
 		cs->BC_Write_Reg = &WriteHDLCPnP;
 		break;
 	  default:
-	  	printk(KERN_WARNING "AVM unknown subtype %d\n", cs->subtyp);
-	  	return(0);
+		printk(KERN_WARNING "AVM unknown subtype %d\n", cs->subtyp);
+		goto dev_avm_cleanup;
 	}
 	printk(KERN_INFO "HiSax: %s config irq:%d base:0x%X\n",
 		(cs->subtyp = AVM_FRITZ_PCI) ? "AVM Fritz!PCI" : "AVM Fritz!PnP",

@@ -858,5 +858,10 @@ ready:
 	cs->irq_func = &avm_pcipnp_interrupt;
 	cs->writeisac(cs, ISAC_MASK, 0xFF);
 	ISACVersion(cs, (cs->subtyp = AVM_FRITZ_PCI) ? "AVM PCI:" : "AVM PnP:");
+	pci_dev_put(dev_avm);
 	return (1);
+
+dev_avm_cleanup:
+	pci_dev_put(dev_avm);
+	return 0;
 }