ARM: OMAP: Updates for OMAP1 common code

@@ -282,7 +282,7 @@ static struct clk arminth_ck16xx = {
 static struct clk dsp_ck = {
 	.name		= "dsp_ck",
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL,
 	.enable_reg	= (void __iomem *)ARM_CKCTL,
 	.enable_bit	= EN_DSPCK,

@@ -295,7 +295,7 @@ static struct clk dsp_ck = {
 static struct clk dspmmu_ck = {
 	.name		= "dspmmu_ck",
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL | ALWAYS_ENABLED,
 	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
 	.recalc		= &omap1_ckctl_recalc,

@@ -306,7 +306,7 @@ static struct clk dspmmu_ck = {
 static struct clk dspper_ck = {
 	.name		= "dspper_ck",
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL | VIRTUAL_IO_ADDRESS,
 	.enable_reg	= (void __iomem *)DSP_IDLECT2,
 	.enable_bit	= EN_PERCK,

@@ -320,7 +320,7 @@ static struct clk dspper_ck = {
 static struct clk dspxor_ck = {
 	.name		= "dspxor_ck",
 	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  VIRTUAL_IO_ADDRESS,
 	.enable_reg	= (void __iomem *)DSP_IDLECT2,
 	.enable_bit	= EN_XORPCK,

@@ -332,7 +332,7 @@ static struct clk dspxor_ck = {
 static struct clk dsptim_ck = {
 	.name		= "dsptim_ck",
 	.parent		= &ck_ref,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  VIRTUAL_IO_ADDRESS,
 	.enable_reg	= (void __iomem *)DSP_IDLECT2,
 	.enable_bit	= EN_DSPTIMCK,

@@ -374,7 +374,7 @@ static struct clk arminth_ck1510 = {
 
 static struct clk tipb_ck = {
 	/* No-idle controlled by "tc_ck" */
-	.name		= "tibp_ck",
+	.name		= "tipb_ck",
 	.parent		= &tc_ck.clk,
 	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
 			  ALWAYS_ENABLED,

@@ -733,7 +733,7 @@ remains active during MPU idle whenever this is enabled */
 static struct clk i2c_fck = {
 	.name		= "i2c_fck",
 	.id		= 1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP310 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
 			  ALWAYS_ENABLED,
 	.parent		= &armxor_ck.clk,

Index: linux-2.6/arch/arm/mach-omap1/board-osk.c
===================================================================
@@ -342,6 +342,38 @@ static void __init osk_mistral_init(void
 	 * can't talk to the ads or even the i2c eeprom.
 	 */
 
+	/* parallel camera interface */
+	omap_cfg_reg(J15_1610_CAM_LCLK);
+	omap_cfg_reg(J18_1610_CAM_D7);
+	omap_cfg_reg(J19_1610_CAM_D6);
+	omap_cfg_reg(J14_1610_CAM_D5);
+	omap_cfg_reg(K18_1610_CAM_D4);
+	omap_cfg_reg(K19_1610_CAM_D3);
+	omap_cfg_reg(K15_1610_CAM_D2);
+	omap_cfg_reg(K14_1610_CAM_D1);
+	omap_cfg_reg(L19_1610_CAM_D0);
+	omap_cfg_reg(L18_1610_CAM_VS);
+	omap_cfg_reg(L15_1610_CAM_HS);
+	omap_cfg_reg(M19_1610_CAM_RSTZ);
+	omap_cfg_reg(Y15_1610_CAM_OUTCLK);
+
+	/* serial camera interface */
+	omap_cfg_reg(H19_1610_CAM_EXCLK);
+	omap_cfg_reg(W13_1610_CCP_CLKM);
+	omap_cfg_reg(Y12_1610_CCP_CLKP);
+	/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
+	// omap_cfg_reg(Y14_1610_CCP_DATAM);
+	omap_cfg_reg(W14_1610_CCP_DATAP);
+
+	/* CAM_PWDN */
+	if (omap_request_gpio(11) == 0) {
+		omap_cfg_reg(N20_1610_GPIO11);
+		omap_set_gpio_direction(11, 0 /* out */);
+		omap_set_gpio_dataout(11, 0 /* off */);
+	} else
+		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
+
+
 	// omap_cfg_reg(P19_1610_GPIO6);	// BUSY
 	omap_cfg_reg(P20_1610_GPIO4);	// PENIRQ
 	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);

Index: linux-2.6/arch/arm/mach-omap1/mux.c
===================================================================
@@ -283,6 +283,30 @@ MUX_CFG("R11_1610_CF_IOIS16",	 B,    0, 
 MUX_CFG("V10_1610_CF_IREQ",	 A,   24,    3,	  2,   14,   0,	  2,	 0,  1)
 MUX_CFG("W10_1610_CF_RESET",	 A,   18,    3,	  2,   12,   1,	  2,	 1,  1)
 MUX_CFG("W11_1610_CF_CD1",	10,   15,    3,	  3,    8,   1,	  3,	 1,  1)
+
+/* parallel camera */
+MUX_CFG("J15_1610_CAM_LCLK",	 4,   24,    0,   0,  18,   1,    0,     0,  0)
+MUX_CFG("J18_1610_CAM_D7",	 4,   27,    0,   0,  19,   1,    0,     0,  0)
+MUX_CFG("J19_1610_CAM_D6",	 5,    0,    0,   0,  20,   1,    0,     0,  0)
+MUX_CFG("J14_1610_CAM_D5",	 5,    3,    0,   0,  21,   1,    0,     0,  0)
+MUX_CFG("K18_1610_CAM_D4",	 5,    6,    0,   0,  22,   1,    0,     0,  0)
+MUX_CFG("K19_1610_CAM_D3",	 5,    9,    0,   0,  23,   1,    0,     0,  0)
+MUX_CFG("K15_1610_CAM_D2",	 5,   12,    0,   0,  24,   1,    0,     0,  0)
+MUX_CFG("K14_1610_CAM_D1",	 5,   15,    0,   0,  25,   1,    0,     0,  0)
+MUX_CFG("L19_1610_CAM_D0",	 5,   18,    0,   0,  26,   1,    0,     0,  0)
+MUX_CFG("L18_1610_CAM_VS",	 5,   21,    0,   0,  27,   1,    0,     0,  0)
+MUX_CFG("L15_1610_CAM_HS",	 5,   24,    0,   0,  28,   1,    0,     0,  0)
+MUX_CFG("M19_1610_CAM_RSTZ",	 5,   27,    0,   0,  29,   0,    0,     0,  0)
+MUX_CFG("Y15_1610_CAM_OUTCLK",	 A,    0,    6,   2,   6,   0,    2,     0,  0)
+
+/* serial camera */
+MUX_CFG("H19_1610_CAM_EXCLK",	 4,   21,    0,   0,  17,   0,    0,     0,  0)
+	/* REVISIT 5912 spec sez CCP_* can't pullup or pulldown ... ? */
+MUX_CFG("Y12_1610_CCP_CLKP",	 8,   18,    6,   1,  24,   1,    1,     0,  0)
+MUX_CFG("W13_1610_CCP_CLKM",	 9,    0,    6,   1,  28,   1,    1,     0,  0)
+MUX_CFG("W14_1610_CCP_DATAP",	 9,   24,    6,   2,   4,   1,    2,     0,  0)
+MUX_CFG("Y14_1610_CCP_DATAM",	 9,   21,    6,   2,   3,   1,    2,     0,  0)
+
 };
 #endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
 

Index: linux-2.6/include/asm-arm/arch-omap/mux.h
===================================================================
@@ -406,6 +406,29 @@ enum omap1xxx_index {
 	V10_1610_CF_IREQ,
 	W10_1610_CF_RESET,
 	W11_1610_CF_CD1,
+
+	/* parallel camera */
+	J15_1610_CAM_LCLK,
+	J18_1610_CAM_D7,
+	J19_1610_CAM_D6,
+	J14_1610_CAM_D5,
+	K18_1610_CAM_D4,
+	K19_1610_CAM_D3,
+	K15_1610_CAM_D2,
+	K14_1610_CAM_D1,
+	L19_1610_CAM_D0,
+	L18_1610_CAM_VS,
+	L15_1610_CAM_HS,
+	M19_1610_CAM_RSTZ,
+	Y15_1610_CAM_OUTCLK,
+
+	/* serial camera */
+	H19_1610_CAM_EXCLK,
+	Y12_1610_CCP_CLKP,
+	W13_1610_CCP_CLKM,
+	W14_1610_CCP_DATAP,
+	Y14_1610_CCP_DATAM,
+
 };
 
 enum omap24xx_index {

@@ -49,6 +49,15 @@ static void omap1_uart_recalc(struct clk * clk)
 		clk->rate = 12000000;
 }
 
+static void omap1_sossi_recalc(struct clk *clk)
+{
+	u32 div = omap_readl(MOD_CONF_CTRL_1);
+
+	div = (div >> 17) & 0x7;
+	div++;
+	clk->rate = clk->parent->rate / div;
+}
+
 static int omap1_clk_enable_dsp_domain(struct clk *clk)
 {
 	int retval;

@@ -396,6 +405,31 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
 	return 0;
 }
 
+static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
+{
+	u32 l;
+	int div;
+	unsigned long p_rate;
+
+	p_rate = clk->parent->rate;
+	/* Round towards slower frequency */
+	div = (p_rate + rate - 1) / rate;
+	div--;
+	if (div < 0 || div > 7)
+		return -EINVAL;
+
+	l = omap_readl(MOD_CONF_CTRL_1);
+	l &= ~(7 << 17);
+	l |= div << 17;
+	omap_writel(l, MOD_CONF_CTRL_1);
+
+	clk->rate = p_rate / (div + 1);
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
+
+	return 0;
+}
+
 static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate)
 {
 	return 96000000 / calc_ext_dsor(rate);

@@ -17,6 +17,8 @@ static int omap1_clk_enable_generic(struct clk * clk);
 static void omap1_clk_disable_generic(struct clk * clk);
 static void omap1_ckctl_recalc(struct clk * clk);
 static void omap1_watchdog_recalc(struct clk * clk);
+static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
+static void omap1_sossi_recalc(struct clk *clk);
 static void omap1_ckctl_recalc_dsp_domain(struct clk * clk);
 static int omap1_clk_enable_dsp_domain(struct clk * clk);
 static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);

@@ -168,9 +170,10 @@ static struct clk ck_dpll1 = {
 
 static struct arm_idlect1_clk ck_dpll1out = {
 	.clk = {
-	       	.name		= "ck_dpll1out",
+		.name		= "ck_dpll1out",
 		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL,
+		.flags		= CLOCK_IN_OMAP16XX | CLOCK_IDLE_CONTROL |
+				  ENABLE_REG_32BIT | RATE_PROPAGATES,
 		.enable_reg	= (void __iomem *)ARM_IDLECT2,
 		.enable_bit	= EN_CKOUT_ARM,
 		.recalc		= &followparent_recalc,

@@ -180,6 +183,19 @@ static struct arm_idlect1_clk ck_dpll1out = {
 	.idlect_shift	= 12,
 };
 
+static struct clk sossi_ck = {
+	.name		= "ck_sossi",
+	.parent		= &ck_dpll1out.clk,
+	.flags		= CLOCK_IN_OMAP16XX | CLOCK_NO_IDLE_PARENT |
+			  ENABLE_REG_32BIT,
+	.enable_reg	= (void __iomem *)MOD_CONF_CTRL_1,
+	.enable_bit	= 16,
+	.recalc		= &omap1_sossi_recalc,
+	.set_rate	= &omap1_set_sossi_rate,
+	.enable		= &omap1_clk_enable_generic,
+	.disable	= &omap1_clk_disable_generic,
+};
+
 static struct clk arm_ck = {
 	.name		= "arm_ck",
 	.parent		= &ck_dpll1,

@@ -760,6 +776,7 @@ static struct clk * onchip_clks[] = {
 	&ck_dpll1,
 	/* CK_GEN1 clocks */
 	&ck_dpll1out.clk,
+	&sossi_ck,
 	&arm_ck,
 	&armper_ck.clk,
 	&arm_gpio_ck,

Index: linux-2.6/arch/arm/mach-omap1/pm.c
===================================================================
@@ -155,11 +155,8 @@ void omap_pm_idle(void)
 	use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1);
 #endif
 
-	if (omap_dma_running()) {
+	if (omap_dma_running())
 		use_idlect1 &= ~(1 << 6);
-		if (omap_lcd_dma_ext_running())
-			use_idlect1 &= ~(1 << 12);
-	}
 
 	/* We should be able to remove the do_sleep variable and multiple
 	 * tests above as soon as drivers, timer and DMA code have been fixed.

Index: linux-2.6/arch/arm/plat-omap/dma.c
===================================================================
@@ -1347,11 +1347,6 @@ void omap_stop_lcd_dma(void)
 	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 }
 
-int omap_lcd_dma_ext_running(void)
-{
-	return lcd_dma.ext_ctrl && lcd_dma.active;
-}
-
 /*----------------------------------------------------------------------------*/
 
 static int __init omap_init_dma(void)

@@ -1493,7 +1488,6 @@ EXPORT_SYMBOL(omap_free_lcd_dma);
 EXPORT_SYMBOL(omap_enable_lcd_dma);
 EXPORT_SYMBOL(omap_setup_lcd_dma);
 EXPORT_SYMBOL(omap_stop_lcd_dma);
-EXPORT_SYMBOL(omap_lcd_dma_ext_running);
 EXPORT_SYMBOL(omap_set_lcd_dma_b1);
 EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
 EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);

Index: linux-2.6/include/asm-arm/arch-omap/dma.h
===================================================================
@@ -417,7 +417,6 @@ extern void omap_free_lcd_dma(void);
 extern void omap_setup_lcd_dma(void);
 extern void omap_enable_lcd_dma(void);
 extern void omap_stop_lcd_dma(void);
-extern int  omap_lcd_dma_ext_running(void);
 extern void omap_set_lcd_dma_ext_controller(int external);
 extern void omap_set_lcd_dma_single_transfer(int single);
 extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,

@@ -271,11 +271,6 @@ int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
 
 #if defined(CONFIG_ARCH_OMAP1)
 
-struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
-{
-	BUG();
-}
-
 /**
  * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
  * @inputmask: current value of idlect mask

Index: linux-2.6/arch/arm/mach-omap1/leds-osk.c
===================================================================
@@ -133,13 +133,13 @@ void osk_leds_event(led_event_t evt)
 		mistral_setled();
 		break;
 
-	case led_idle_start:
-		hw_led_state |= IDLE_LED;
+	case led_idle_start:	/* idle == off */
+		hw_led_state &= ~IDLE_LED;
 		mistral_setled();
 		break;
 
 	case led_idle_end:
-		hw_led_state &= ~IDLE_LED;
+		hw_led_state |= IDLE_LED;
 		mistral_setled();
 		break;
 

Index: linux-2.6/arch/arm/mach-omap1/pm.c
===================================================================
@@ -58,7 +58,6 @@
 #include <asm/arch/tc.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/mux.h>
-#include <asm/arch/tps65010.h>
 #include <asm/arch/dma.h>
 #include <asm/arch/dsp_common.h>
 #include <asm/arch/dmtimer.h>

@@ -248,11 +247,6 @@ void omap_pm_suspend(void)
 
 	omap_serial_wake_trigger(1);
 
-	if (machine_is_omap_osk()) {
-		/* Stop LED1 (D9) blink */
-		tps65010_set_led(LED1, OFF);
-	}
-
 	if (!cpu_is_omap15xx())
 		omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
 

@@ -445,11 +439,6 @@ void omap_pm_suspend(void)
 	omap_serial_wake_trigger(0);
 
 	printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
-
-	if (machine_is_omap_osk()) {
-		/* Let LED1 (D9) blink again */
-		tps65010_set_led(LED1, BLINK);
-	}
 }
 
 #if defined(DEBUG) && defined(CONFIG_PROC_FS)