New: Kernel oops when pulling out a USB device which is stillin use
http://bugme.osdl.org/show_bug.cgi?id=1620
Summary: Kernel oops when pulling out a USB device which is still
in use
Kernel Version: 2.6.0-test11 (all 2.4 and 2.6 versions in fact)
Status: NEW
Severity: normal
Owner: [email protected]
Submitter: [email protected]
Distribution: Fedora Core 1
Hardware Environment: IBM ThinkPad T23/T30/T40
Software Environment: NA
Problem Description:
If a USB device which is in use, is pulled out without stopping the processes which uses them, usualy give a kernel oops, and sometimes hangs the machine. After kernel oops, if the machine is still usable, it is not stable any more. I know is not good to take out a USB device while still in use, but this should not affect the kernel, or hang the machine.
Steps to reproduce:
Use a USB device, then pull it out before finising using it.
For instance lets take a USB to serial converter based on pl2303 chipset:
Plug the USB to Serial converter in USB port.
do "cat /dev/ttyUSB0" in one xterm console
pull out the USB serial converter (while it is in use in the other console) press Ctrl+C in the xterm console where the "cat /dev/ttyUSB0" was issued and you'll have something like this:
(note that this output is from Fedora original kernel, but you get same results from a 2.6.0-test11 kernel)usb.c: registered new driver serialusbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4usbserial.c: USB Serial support registered for PL-2303 usbserial.c: PL-2303 converter detectedusbserial.c: PL-2303 converter now attached to ttyUSB0 (or usb/tts/0 for devfs) pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.9 usb-uhci.c: interrupt, status 3, frame# 1usb.c: USB disconnect on device 00:07.2-1 address 2usb.c: USB disconnect on device 00:07.2-1.1 address 3usb.c: USB disconnect on device 00:07.2-1.2 address 4
Unable to handle kernel NULL pointer dereference at virtual address 00000998 printing eip: f08e94da *pde = 00000000 Oops: 0002 pl2303 usbserial printer parport_pc lp parport autofs rfcomm l2cap bluez tulip floppy sg scsi_mod keybdev mousedev hid input usb-uhci usbcore ext3 jbd CPU: 0 EIP: 0060:[<f08e94da>] Not tainted EFLAGS: 00010246
EIP is at usb_serial_disconnect [usbserial] 0x6a (2.4.22-1.2115.nptl)
eax: 00000000 ebx: ea1c3000 ecx: ea574000 edx: ea1c3000
esi: ea1c301c edi: 00000000 ebp: ea1c3000 esp: ef7adeec
ds: 0068 es: 0068 ss: 0068
Process khubd (pid: 74, stackpage=ef7ad000)
Stack: ea1c301c 00000000 edcba540 f08eb480 f08eb460 00000000 edcba640 f0830274
eeee8a00 ea1c3000 eeee8a04 00000004 00000000 eeee8a00 eeee8604 f0840d40
0000000e edcba400 f0830314 eeee8710 edcba400 eeee8604 00000002 00000018
Call Trace: [<f08eb480>] usb_serial_driver [usbserial] 0x20 (0xef7adef8)[<f08eb460>] usb_serial_driver [usbserial] 0x0 (0xef7adefc) [<f0830274>] usb_disconnect_R1a2445d3 [usbcore] 0x94 (0xef7adf08) [<f0840d40>] hub_driver [usbcore] 0x0 (0xef7adf28) [<f0830314>] usb_disconnect_R1a2445d3 [usbcore] 0x134 (0xef7adf34) [<f08330cf>] usb_hub_port_connect_change [usbcore] 0x26f (0xef7adf60) [<f0832b2c>] usb_hub_port_status [usbcore] 0x6c (0xef7adf74) [<f08333b8>] usb_hub_events [usbcore] 0x2d8 (0xef7adf94) [<f0833446>] usb_hub_thread [usbcore] 0x36 (0xef7adfc0) [<f0833410>] usb_hub_thread [usbcore] 0x0 (0xef7adfc4) [<f0833410>] usb_hub_thread [usbcore] 0x0 (0xef7adfe0) [<c010727d>] kernel_thread_helper [kernel] 0x5 (0xef7adff0)
Code: c7 80 98 09 00 00 00 00 00 00 8d 4e 58 ff 43 74 0f 8e 74 05