HTB and burst...
Hey everyone,
For some reason my htb configuration isn't allowing any class to burst up to its ceiling ever, even when the link is only being utilised by one class that class only ever gets its assigned rate and exactly that assigned rate...
The hierarchy I have is 1: at the root with no default, then 1:2 and 1:3 under that, both with assigned rates, then 2: and 3: under those respectively with defaults configured. Iptables marks the packets based on incoming interface which then get filtered to either 1:2 or 1:3 and filtered again, shaped accordingly etc... All classes and qdiscs are HTB
Any ideas anyone?
Signature · 6 lines
Michael Fincham <[email protected]> _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 7 lines · Michael Fincham
Hey everyone,
For some reason my htb configuration isn't allowing any class to burst up to its ceiling ever, even when the link is only being utilised by one class that class only ever gets its assigned rate and exactly that assigned rate...
Quoted 8 lines
The hierarchy I have is 1: at the root with no default, then 1:2 and 1:3 under that, both with assigned rates, then 2: and 3: under those respectively with defaults configured. Iptables marks the packets based on incoming interface which then get filtered to either 1:2 or 1:3 and filtered again, shaped accordingly etc... All classes and qdiscs are HTB
Any ideas anyone?
It could be to do with clock Hz - your burst needs to be large enough to reach rate/ceil per tick.
Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
It looks as though I may have had the hierarchy wrong... I had a class with a qdisc as a child then all my classes as children of the qdisc... now borrowing allowed as they're all root qdiscs.
-Michael
Quoted 30 lines · Jon J
I would need to see your actual script to say for sure.
Jon Flechsenhaar
Boeing WNW Team
Network Services
(714)-762-1231
202-E7-----Original Message-----
From: Michael Fincham [mailto:[email protected]]
Sent: Wednesday, May 02, 2007 6:23 PM
To: [email protected]
Subject: [LARTC] HTB and burst...Hey everyone,
For some reason my htb configuration isn't allowing any class to burst up to its ceiling ever, even when the link is only being utilised by one class that class only ever gets its assigned rate and exactly that assigned rate...
The hierarchy I have is 1: at the root with no default, then 1:2 and 1:3 under that, both with assigned rates, then 2: and 3: under those respectively with defaults configured. Iptables marks the packets based on incoming interface which then get filtered to either 1:2 or 1:3 and filtered again, shaped accordingly etc... All classes and qdiscs are HTB
Any ideas anyone?
Quoted 7 lines
--
Michael Fincham <[email protected]>_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc