Skip to contentSkip to conversation

Regression in 2.6.21-mm1 (git-input) on Dell D610 laptop

DISCUSSION Remi Colinet 5 participants 8 messages May 10, 2007 – May 14, 2007

Subsystems (2)
lore
Share & tools
lore

Remi Colinet

author Applied
#0 lore raw

Hello,

My D610 ALPS Glide Point is unresponsive with 2.6.21-mm1 patch. No problem noticed with 2.6.21.

The culprit seems to be git-input. I have applied 2.6.21-mm1 on top of 2.6.21 and then removed git-input patch. It is ok since then.

Quoted 1 line

From what i can see, no interrupt is raised from the GlidePoint with git-input

applied. IRQ count 12 does not increase. It is when using the touchpad.

CPU0

  0:        160   IO-APIC-edge      timer
  1:        935   IO-APIC-edge      i8042
  7:          0   IO-APIC-edge      parport0
  8:          1   IO-APIC-edge      rtc
  9:          2   IO-APIC-fasteoi   acpi
=> 12:        114   IO-APIC-edge      i8042 <=
 14:       3223   IO-APIC-edge      libata
 15:          5   IO-APIC-edge      libata
 16:          0   IO-APIC-fasteoi   uhci_hcd:usb1, ehci_hcd:usb5, Intel ICH6
 17:          1   IO-APIC-fasteoi   uhci_hcd:usb2, ipw2200, Intel ICH6 Modem
 18:          0   IO-APIC-fasteoi   uhci_hcd:usb3
 19:          1   IO-APIC-fasteoi   uhci_hcd:usb4, yenta
NMI:          0
LOC:       4051
ERR:          0
MIS:          0

I have also tried to disable the ALPS driver in the .config file. IRQ 12 are then raised when using the Glide Point. X refuses to start.

Any idea?

Remi Colinet

#1 lore raw
Quoted 27 lines · On Thu, 10 May 2007 15:05:25 +0200 Remi Colinet <[email protected]> wrote:

My D610 ALPS Glide Point is unresponsive with 2.6.21-mm1 patch. No problem noticed with 2.6.21.

The culprit seems to be git-input. I have applied 2.6.21-mm1 on top of 2.6.21 and then removed git-input patch. It is ok since then.

Quoted 1 line

From what i can see, no interrupt is raised from the GlidePoint with git-input

applied. IRQ count 12 does not increase. It is when using the touchpad.

CPU0

  0:        160   IO-APIC-edge      timer
  1:        935   IO-APIC-edge      i8042
  7:          0   IO-APIC-edge      parport0
  8:          1   IO-APIC-edge      rtc
  9:          2   IO-APIC-fasteoi   acpi
=> 12:        114   IO-APIC-edge      i8042 <=
 14:       3223   IO-APIC-edge      libata
 15:          5   IO-APIC-edge      libata
 16:          0   IO-APIC-fasteoi   uhci_hcd:usb1, ehci_hcd:usb5, Intel ICH6
 17:          1   IO-APIC-fasteoi   uhci_hcd:usb2, ipw2200, Intel ICH6 Modem
 18:          0   IO-APIC-fasteoi   uhci_hcd:usb3
 19:          1   IO-APIC-fasteoi   uhci_hcd:usb4, yenta
NMI:          0
LOC:       4051
ERR:          0
MIS:          0
Quoted 3 lines

I have also tried to disable the ALPS driver in the .config file. IRQ 12 are then raised when using the Glide Point. X refuses to start.

Are you able to test 2.6.21-mm2?

Thanks.

#2 lore raw

Hi Remi,

Quoted 8 lines · Andrew Morton
Quoted 5 lines · On Thu, 10 May 2007 15:05:25 +0200 Remi Colinet <[email protected]> wrote:

My D610 ALPS Glide Point is unresponsive with 2.6.21-mm1 patch. No problem noticed with 2.6.21.

The culprit seems to be git-input. I have applied 2.6.21-mm1 on top of 2.6.21 and then removed git-input patch. It is ok since then.

Have you tried any other -mm? Also, does it help if you stick

	ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM);

at the very beginning of psmouse_initialize() in
drivers/input/mouse/psmouse-base.c?

Signature · 1 line
Dmitry
#3 lore raw

Selon Dmitry Torokhov <[email protected]>:

Quoted 6 lines

Hi Remi,

Quoted 3 lines · Andrew Morton

On Thu, 10 May 2007 15:05:25 +0200
Remi Colinet <[email protected]> wrote:

Quoted 9 lines
Quoted 4 lines
Quoted 4 lines

My D610 ALPS Glide Point is unresponsive with 2.6.21-mm1 patch. No problem noticed with 2.6.21.

The culprit seems to be git-input. I have applied 2.6.21-mm1 on top of

2.6.21

Quoted 1 line
Quoted 1 line

and then removed git-input patch. It is ok since then.

Have you tried any other -mm? Also, does it help if you stick

Tried 2.6.21-mm3. The GlidePoint is still unresponsive.

Quoted 5 lines
	ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM);

at the very beginning of psmouse_initialize() in
drivers/input/mouse/psmouse-base.c?

Going to try it ...

In fact, I already added the following line at the begining of each function in drivers/input/mouse/alps.c

printk(KERN_ERR "start of function ...\n");

But no message is displayed when using the Glide Point. Interrupt are not raised. The alps driver is not called by the i8042 handler.

Remi Colinet

Quoted 8 lines

--
Dmitry
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#4 lore raw
In reply to Dmitry Torokhov
Quoted 4 lines · And Dmitry Torokhov

Have you tried any other -mm? Also, does it help if you stick

        ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM);

at the very beginning of psmouse_initialize() in
drivers/input/mouse/psmouse-base.c?

Seems to fix it for me on a D620.

Bisecting on mainline gave commit f42649e84831efc69d5f621f1c36a39b4e384a99 (Input: ALPS - handle errors from input_register_device()) as the place where the trackpoint half stopped working. I don't necessarily believe it, unless the psmouse_reset on failure caused problems without logging anything.

Jason

#5 lore raw
Quoted 8 lines · Jason Riedy
Quoted 4 lines · And Dmitry Torokhov

Have you tried any other -mm? Also, does it help if you stick

        ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM);

at the very beginning of psmouse_initialize() in
drivers/input/mouse/psmouse-base.c?

Seems to fix it for me on a D620.

Ok, thanks.

Quoted 7 lines

Bisecting on mainline gave commit f42649e84831efc69d5f621f1c36a39b4e384a99 (Input: ALPS - handle errors from input_register_device()) as the place where the trackpoint half stopped working. I don't necessarily believe it, unless the psmouse_reset on failure caused problems without logging anything.

I don't think so. Could you please try the patch below? Thanks!

Signature · 115 lines
Dmitry

Input: ALPS - force stream mode

ALPS appears to need SETSTREAM command after reset, otherwise it
does not produce any data. Now that we do not request stream mode
by default individual drivers need to take care of it.

Signed-off-by: Dmitry Torokhov <[email protected]>
---

 drivers/input/mouse/alps.c |   55 +++++++++++++++++++++++----------------------
 1 files changed, 29 insertions(+), 26 deletions(-)

Index: work/drivers/input/mouse/alps.c
===================================================================
--- work.orig/drivers/input/mouse/alps.c
+++ work/drivers/input/mouse/alps.c
@@ -251,11 +251,15 @@ static const struct alps_model_info *alp
 
 	dbg("E7 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);
 
-	for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++);
-	*version = (param[0] << 8) | (param[1] << 4) | i;
+	if (version) {
+		for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++)
+			/* empty */;
+		*version = (param[0] << 8) | (param[1] << 4) | i;
+	}
 
 	for (i = 0; i < ARRAY_SIZE(alps_model_data); i++)
-		if (!memcmp(param, alps_model_data[i].signature, sizeof(alps_model_data[i].signature)))
+		if (!memcmp(param, alps_model_data[i].signature,
+			    sizeof(alps_model_data[i].signature)))
 			return alps_model_data + i;
 
 	return NULL;
@@ -380,32 +384,46 @@ static int alps_poll(struct psmouse *psm
 	return 0;
 }
 
-static int alps_reconnect(struct psmouse *psmouse)
+static int alps_hw_init(struct psmouse *psmouse, int *version)
 {
 	struct alps_data *priv = psmouse->private;
-	int version;
-
-	psmouse_reset(psmouse);
 
-	if (!(priv->i = alps_get_model(psmouse, &version)))
+	priv->i = alps_get_model(psmouse, version);
+	if (!priv->i)
 		return -1;
 
 	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
 		return -1;
 
 	if (alps_tap_mode(psmouse, 1)) {
-		printk(KERN_WARNING "alps.c: Failed to reenable hardware tapping\n");
+		printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
 		return -1;
 	}
 
 	if (alps_absolute_mode(psmouse)) {
-		printk(KERN_ERR "alps.c: Failed to reenable absolute mode\n");
+		printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
 		return -1;
 	}
 
 	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
 		return -1;
 
+	/* ALPS needs stream mode, otherwise it won't report any data */
+	if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) {
+		printk(KERN_ERR "alps.c: Failed to enable stream mode\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int alps_reconnect(struct psmouse *psmouse)
+{
+	psmouse_reset(psmouse);
+
+	if (alps_hw_init(psmouse, NULL))
+		return -1;
+
 	return 0;
 }
 
@@ -431,22 +449,7 @@ int alps_init(struct psmouse *psmouse)
 
 	priv->dev2 = dev2;
 
-	priv->i = alps_get_model(psmouse, &version);
-	if (!priv->i)
-		goto init_fail;
-
-	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
-		goto init_fail;
-
-	if (alps_tap_mode(psmouse, 1))
-		printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
-
-	if (alps_absolute_mode(psmouse)) {
-		printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
-		goto init_fail;
-	}
-
-	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
+	if (alps_hw_init(psmouse, &version))
 		goto init_fail;
 
 	dev1->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
#6 lore raw
Quoted 1 line · And Dmitry Torokhov

I don't think so. Could you please try the patch below? Thanks!

The appended patch on top of yours fixes the too-early access of psmouse->private. I don't know the expected lifetime of psmouse->private, so I chickened out of simply assigning priv earlier.

BTW, why do you pass psmouse down through the initializations rather than ps2dev and private?

Jason, using git's index, dammit...

drivers/input/mouse/alps.c +4 -5
index 2aeb299..990d2a5 100644
@@ -384,10 +384,9 @@ static int alps_poll(struct psmouse *psmouse)
 	return 0;
 }
 
-static int alps_hw_init(struct psmouse *psmouse, int *version)
+static int alps_hw_init(struct psmouse *psmouse, struct alps_data *priv,
+			int *version)
 {
-	struct alps_data *priv = psmouse->private;
-
 	priv->i = alps_get_model(psmouse, version);
 	if (!priv->i)
 		return -1;
@@ -421,7 +420,7 @@ static int alps_reconnect(struct psmouse *psmouse)
 {
 	psmouse_reset(psmouse);
 
-	if (alps_hw_init(psmouse, NULL))
+	if (alps_hw_init(psmouse, (struct alps_data *)psmouse->private, NULL))
 		return -1;
 
 	return 0;
@@ -449,7 +448,7 @@ int alps_init(struct psmouse *psmouse)
 
 	priv->dev2 = dev2;
 
-	if (alps_hw_init(psmouse, &version))
+	if (alps_hw_init(psmouse, priv, &version))
 		goto init_fail;
 
 	dev1->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
#7 lore raw
In reply to Andrew Morton

Selon Andrew Morton <[email protected]>:

Quoted 34 lines
Quoted 4 lines · On Thu, 10 May 2007 15:05:25 +0200 Remi Colinet <[email protected]> wrote:

My D610 ALPS Glide Point is unresponsive with 2.6.21-mm1 patch. No problem noticed with 2.6.21.

The culprit seems to be git-input. I have applied 2.6.21-mm1 on top of

2.6.21

Quoted 3 lines

and then removed git-input patch. It is ok since then.

Quoted 1 line

From what i can see, no interrupt is raised from the GlidePoint with

git-input

Quoted 12 lines

applied. IRQ count 12 does not increase. It is when using the touchpad.

CPU0

  0:        160   IO-APIC-edge      timer
  1:        935   IO-APIC-edge      i8042
  7:          0   IO-APIC-edge      parport0
  8:          1   IO-APIC-edge      rtc
  9:          2   IO-APIC-fasteoi   acpi
=> 12:        114   IO-APIC-edge      i8042 <=
 14:       3223   IO-APIC-edge      libata
 15:          5   IO-APIC-edge      libata
 16:          0   IO-APIC-fasteoi   uhci_hcd:usb1, ehci_hcd:usb5, Intel

ICH6

Quoted 1 line

17: 1 IO-APIC-fasteoi uhci_hcd:usb2, ipw2200, Intel ICH6

Modem

Quoted 7 lines
 18:          0   IO-APIC-fasteoi   uhci_hcd:usb3
 19:          1   IO-APIC-fasteoi   uhci_hcd:usb4, yenta
NMI:          0
LOC:       4051
ERR:          0
MIS:          0
Quoted 8 lines
Quoted 1 line

I have also tried to disable the ALPS driver in the .config file. IRQ 12

are

Quoted 2 lines

then raised when using the Glide Point. X refuses to start.

Are you able to test 2.6.21-mm2?

I have tried with the lastest mm broken-out snapshot, i.e 2.6.21-mm3. The GlidePoint is still unresponsive.

2.6.21-git13 works fine with the GlidePoint.

So I'am bisecting 2.6.21-mm3. It works just with the origin.patch applied.

Thanks,
Remi Colinet