libata: improve ATA ACPI support, take#3

index 4166407..6f266c8 100644
@@ -3675,8 +3675,8 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
 }
 
 /**
- *	ata_dev_revalidate - Revalidate ATA device
- *	@dev: device to revalidate
+ *	ata_dev_reread_id - Re-read IDENTIFY data
+ *	@adev: target ATA device
  *	@readid_flags: read ID flags
  *
  *	Re-read IDENTIFY page and make sure @dev is still attached to

@@ -3688,29 +3688,50 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
  *	RETURNS:
  *	0 on success, negative errno otherwise
  */
-int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags)
+int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags)
 {
 	unsigned int class = dev->class;
 	u16 *id = (void *)dev->ap->sector_buf;
 	int rc;
 
-	if (!ata_dev_enabled(dev)) {
-		rc = -ENODEV;
-		goto fail;
-	}
-
 	/* read ID data */
 	rc = ata_dev_read_id(dev, &class, readid_flags, id);
 	if (rc)
-		goto fail;
+		return rc;
 
 	/* is the device still there? */
-	if (!ata_dev_same_device(dev, class, id)) {
-		rc = -ENODEV;
-		goto fail;
-	}
+	if (!ata_dev_same_device(dev, class, id))
+		return -ENODEV;
 
 	memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS);
+	return 0;
+}
+
+/**
+ *	ata_dev_revalidate - Revalidate ATA device
+ *	@dev: device to revalidate
+ *	@readid_flags: read ID flags
+ *
+ *	Re-read IDENTIFY page, make sure @dev is still attached to the
+ *	port and reconfigure it according to the new IDENTIFY page.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep)
+ *
+ *	RETURNS:
+ *	0 on success, negative errno otherwise
+ */
+int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags)
+{
+	int rc;
+
+	if (!ata_dev_enabled(dev))
+		return -ENODEV;
+
+	/* re-read ID */
+	rc = ata_dev_reread_id(dev, readid_flags);
+	if (rc)
+		goto fail;
 
 	/* configure device according to the new ID */
 	rc = ata_dev_configure(dev);

index 8b71b73..13cb0c9 100644
@@ -76,7 +76,8 @@ extern unsigned ata_exec_internal_sg(struct ata_device *dev,
 extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
 extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 			   unsigned int flags, u16 *id);
-extern int ata_dev_revalidate(struct ata_device *dev, unsigned int flags);
+extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);
+extern int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags);
 extern int ata_dev_configure(struct ata_device *dev);
 extern int sata_down_spd_limit(struct ata_port *ap);
 extern int sata_set_spd_needed(struct ata_port *ap);

index 6f266c8..d5939e6 100644
@@ -1919,7 +1919,6 @@ int ata_dev_configure(struct ata_device *dev)
 			snprintf(revbuf, 7, "ATA-%d",  ata_id_major_version(id));
 
 		dev->n_sectors = ata_id_n_sectors(id);
-		dev->n_sectors_boot = dev->n_sectors;
 
 		/* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
 		ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,

@@ -3632,7 +3631,6 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
 	const u16 *old_id = dev->id;
 	unsigned char model[2][ATA_ID_PROD_LEN + 1];
 	unsigned char serial[2][ATA_ID_SERNO_LEN + 1];
-	u64 new_n_sectors;
 
 	if (dev->class != new_class) {
 		ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n",

@@ -3644,7 +3642,6 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
 	ata_id_c_string(new_id, model[1], ATA_ID_PROD, sizeof(model[1]));
 	ata_id_c_string(old_id, serial[0], ATA_ID_SERNO, sizeof(serial[0]));
 	ata_id_c_string(new_id, serial[1], ATA_ID_SERNO, sizeof(serial[1]));
-	new_n_sectors = ata_id_n_sectors(new_id);
 
 	if (strcmp(model[0], model[1])) {
 		ata_dev_printk(dev, KERN_INFO, "model number mismatch "

@@ -3658,19 +3655,6 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
 		return 0;
 	}
 
-	if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) {
-		ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
-			       "%llu != %llu\n",
-			       (unsigned long long)dev->n_sectors,
-			       (unsigned long long)new_n_sectors);
-		/* Are we the boot time size - if so we appear to be the
-		   same disk at this point and our HPA got reapplied */
-		if (ata_ignore_hpa && dev->n_sectors_boot == new_n_sectors 
-		    && ata_id_hpa_enabled(new_id))
-			return 1;
-		return 0;
-	}
-
 	return 1;
 }
 

@@ -3723,6 +3707,7 @@ int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags)
  */
 int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags)
 {
+	u64 n_sectors = dev->n_sectors;
 	int rc;
 
 	if (!ata_dev_enabled(dev))

@@ -3735,8 +3720,20 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags)
 
 	/* configure device according to the new ID */
 	rc = ata_dev_configure(dev);
-	if (rc == 0)
-		return 0;
+	if (rc)
+		goto fail;
+
+	/* verify n_sectors hasn't changed */
+	if (dev->class == ATA_DEV_ATA && dev->n_sectors != n_sectors) {
+		ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
+			       "%llu != %llu\n",
+			       (unsigned long long)n_sectors,
+			       (unsigned long long)dev->n_sectors);
+		rc = -ENODEV;
+		goto fail;
+	}
+
+	return 0;
 
  fail:
 	ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc);

index 27d9362..b38a0f9 100644
@@ -431,7 +431,6 @@ struct ata_device {
 	struct scsi_device	*sdev;		/* attached SCSI device */
 	/* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */
 	u64			n_sectors;	/* size of device, if ATA */
-	u64			n_sectors_boot;	/* size of ATA device at startup */
 	unsigned int		class;		/* ATA_DEV_xxx */
 	u16			id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
 	u8			pio_mode;

index 1ae443d..e00e1b9 100644
@@ -173,7 +173,8 @@ enum {
 
 	AHCI_FLAG_COMMON		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 					  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-					  ATA_FLAG_SKIP_D2H_BSY,
+					  ATA_FLAG_SKIP_D2H_BSY |
+					  ATA_FLAG_ACPI_SATA,
 };
 
 struct ahci_cmd_hdr {

index ed4138e..0223673 100644
@@ -321,7 +321,7 @@ static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length,
 
 	/* Don't continue if device has no _ADR method.
 	 * _GTF is intended for known motherboard devices. */
-	if (!(ap->cbl == ATA_CBL_SATA)) {
+	if (!(ap->flags & ATA_FLAG_ACPI_SATA)) {
 		err = pata_get_dev_handle(gdev, &dev_handle, &pcidevfn);
 		if (err < 0) {
 			if (ata_msg_probe(ap))

@@ -343,7 +343,7 @@ static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length,
 
 	/* Get this drive's _ADR info. if not already known. */
 	if (!dev->obj_handle) {
-		if (!(ap->cbl == ATA_CBL_SATA)) {
+		if (!(ap->flags & ATA_FLAG_ACPI_SATA)) {
 			/* get child objects of dev_handle == channel objects,
 	 		 * + _their_ children == drive objects */
 			/* channel is ap->port_no */

@@ -528,7 +528,7 @@ static int do_drive_set_taskfiles(struct ata_device *dev,
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
 			       __FUNCTION__, ap->port_no);
 
-	if (libata_noacpi || !(ap->cbl == ATA_CBL_SATA))
+	if (libata_noacpi || !(ap->flags & ATA_FLAG_ACPI_SATA))
 		return 0;
 
 	if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED))

@@ -578,7 +578,7 @@ int ata_acpi_exec_tfs(struct ata_port *ap)
 	 * we should not run GTF on PATA devices since some
 	 * PATA require execution of GTM/STM before GTF.
 	 */
-	if (!(ap->cbl == ATA_CBL_SATA))
+	if (!(ap->flags & ATA_FLAG_ACPI_SATA))
 		return 0;
 
 	for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {

@@ -641,7 +641,7 @@ int ata_acpi_push_id(struct ata_device *dev)
 			       __FUNCTION__, dev->devno, ap->port_no);
 
 	/* Don't continue if not a SATA device. */
-	if (!(ap->cbl == ATA_CBL_SATA)) {
+	if (!(ap->flags & ATA_FLAG_ACPI_SATA)) {
 		if (ata_msg_probe(ap))
 			ata_dev_printk(dev, KERN_DEBUG,
 				"%s: Not a SATA device\n", __FUNCTION__);

index a69d78c..0cb6618 100644
@@ -237,7 +237,8 @@ enum {
 	/* host flags */
 	SIL24_COMMON_FLAGS	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				  ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY,
+				  ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY |
+				  ATA_FLAG_ACPI_SATA,
 	SIL24_FLAG_PCIX_IRQ_WOC	= (1 << 24), /* IRQ loss errata on PCI-X */
 
 	IRQ_STAT_4PORTS		= 0xf,

index b38a0f9..9b2122d 100644
@@ -173,6 +173,7 @@ enum {
 	ATA_FLAG_SETXFER_POLLING= (1 << 14), /* use polling for SETXFER */
 	ATA_FLAG_IGN_SIMPLEX	= (1 << 15), /* ignore SIMPLEX */
 	ATA_FLAG_NO_IORDY	= (1 << 16), /* controller lacks iordy */
+	ATA_FLAG_ACPI_SATA	= (1 << 17), /* need native SATA ACPI layout */
 
 	/* The following flag belongs to ap->pflags but is kept in
 	 * ap->flags because it's referenced in many LLDs and will be

index 0223673..eda4263 100644
@@ -24,10 +24,8 @@
 #include <acpi/acmacros.h>
 #include <acpi/actypes.h>
 
-#define SATA_ROOT_PORT(x)	(((x) >> 16) & 0xffff)
-#define SATA_PORT_NUMBER(x)	((x) & 0xffff)	/* or NO_PORT_MULT */
 #define NO_PORT_MULT		0xffff
-#define SATA_ADR_RSVD		0xffffffff
+#define SATA_ADR(root,pmp)	(((root) << 16) | (pmp))
 
 #define REGS_PER_GTF		7
 struct taskfile_array {

@@ -42,230 +40,64 @@ static int is_pci_dev(struct device *dev)
 	return (dev->bus == &pci_bus_type);
 }
 
-/**
- * sata_get_dev_handle - finds acpi_handle and PCI device.function
- * @dev: device to locate
- * @handle: returned acpi_handle for @dev
- * @pcidevfn: return PCI device.func for @dev
- *
- * This function is somewhat SATA-specific.  Or at least the
- * PATA & SATA versions of this function are different,
- * so it's not entirely generic code.
- *
- * Returns 0 on success, <0 on error.
- */
-static int sata_get_dev_handle(struct device *dev, acpi_handle *handle,
-					acpi_integer *pcidevfn)
+static void ata_acpi_associate_sata_port(struct ata_port *ap)
 {
-	struct pci_dev	*pci_dev;
-	acpi_integer	addr;
-
-	if (!is_pci_dev(dev))
-		return -ENODEV;
-
-	pci_dev = to_pci_dev(dev);	/* NOTE: PCI-specific */
-	/* Please refer to the ACPI spec for the syntax of _ADR. */
-	addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
-	*pcidevfn = addr;
-	*handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr);
-	if (!*handle)
-		return -ENODEV;
-	return 0;
+	acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
+
+	ap->device->acpi_handle = acpi_get_child(ap->host->acpi_handle, adr);
 }
 
-/**
- * pata_get_dev_handle - finds acpi_handle and PCI device.function
- * @dev: device to locate
- * @handle: returned acpi_handle for @dev
- * @pcidevfn: return PCI device.func for @dev
- *
- * The PATA and SATA versions of this function are different.
- *
- * Returns 0 on success, <0 on error.
- */
-static int pata_get_dev_handle(struct device *dev, acpi_handle *handle,
-				acpi_integer *pcidevfn)
+static void ata_acpi_associate_ide_port(struct ata_port *ap)
 {
-	unsigned int bus, devnum, func;
-	acpi_integer addr;
-	acpi_handle dev_handle, parent_handle;
-	struct acpi_buffer buffer = {.length = ACPI_ALLOCATE_BUFFER,
-					.pointer = NULL};
-	acpi_status status;
-	struct acpi_device_info	*dinfo = NULL;
-	int ret = -ENODEV;
-	struct pci_dev *pdev;
-
-	if (!is_pci_dev(dev))
-		return -ENODEV;
-
-	pdev = to_pci_dev(dev);
-
-	bus = pdev->bus->number;
-	devnum = PCI_SLOT(pdev->devfn);
-	func = PCI_FUNC(pdev->devfn);
-
-	dev_handle = DEVICE_ACPI_HANDLE(dev);
-	parent_handle = DEVICE_ACPI_HANDLE(dev->parent);
-
-	status = acpi_get_object_info(parent_handle, &buffer);
-	if (ACPI_FAILURE(status))
-		goto err;
-
-	dinfo = buffer.pointer;
-	if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
-	    dinfo->address == bus) {
-		/* ACPI spec for _ADR for PCI bus: */
-		addr = (acpi_integer)(devnum << 16 | func);
-		*pcidevfn = addr;
-		*handle = dev_handle;
-	} else {
-		goto err;
-	}
+	int max_devices, i;
 
-	if (!*handle)
-		goto err;
-	ret = 0;
-err:
-	kfree(dinfo);
-	return ret;
-}
-
-struct walk_info {		/* can be trimmed some */
-	struct device	*dev;
-	struct acpi_device *adev;
-	acpi_handle	handle;
-	acpi_integer	pcidevfn;
-	unsigned int	drivenum;
-	acpi_handle	obj_handle;
-	struct ata_port *ataport;
-	struct ata_device *atadev;
-	u32		sata_adr;
-	int		status;
-	char		basepath[ACPI_PATHNAME_MAX];
-	int		basepath_len;
-};
+	ap->acpi_handle = acpi_get_child(ap->host->acpi_handle, ap->port_no);
+	if (!ap->acpi_handle)
+		return;
 
-static acpi_status get_devices(acpi_handle handle,
-				u32 level, void *context, void **return_value)
-{
-	acpi_status		status;
-	struct walk_info	*winfo = context;
-	struct acpi_buffer	namebuf = {ACPI_ALLOCATE_BUFFER, NULL};
-	char			*pathname;
-	struct acpi_buffer	buffer;
-	struct acpi_device_info	*dinfo;
-
-	status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &namebuf);
-	if (status)
-		goto ret;
-	pathname = namebuf.pointer;
-
-	buffer.length = ACPI_ALLOCATE_BUFFER;
-	buffer.pointer = NULL;
-	status = acpi_get_object_info(handle, &buffer);
-	if (ACPI_FAILURE(status))
-		goto out2;
-
-	dinfo = buffer.pointer;
-
-	/* find full device path name for pcidevfn */
-	if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
-	    dinfo->address == winfo->pcidevfn) {
-		if (ata_msg_probe(winfo->ataport))
-			ata_dev_printk(winfo->atadev, KERN_DEBUG,
-				":%s: matches pcidevfn (0x%llx)\n",
-				pathname, winfo->pcidevfn);
-		strlcpy(winfo->basepath, pathname,
-			sizeof(winfo->basepath));
-		winfo->basepath_len = strlen(pathname);
-		goto out;
-	}
+	max_devices = 1;
+	if (ap->flags & ATA_FLAG_SLAVE_POSS)
+		max_devices++;
 
-	/* if basepath is not yet known, ignore this object */
-	if (!winfo->basepath_len)
-		goto out;
+	for (i = 0; i < max_devices; i++) {
+		struct ata_device *dev = &ap->device[i];
 
-	/* if this object is in scope of basepath, maybe use it */
-	if (strncmp(pathname, winfo->basepath,
-	    winfo->basepath_len) == 0) {
-		if (!(dinfo->valid & ACPI_VALID_ADR))
-			goto out;
-		if (ata_msg_probe(winfo->ataport))
-			ata_dev_printk(winfo->atadev, KERN_DEBUG,
-				"GOT ONE: (%s) root_port = 0x%llx,"
-				" port_num = 0x%llx\n", pathname,
-				SATA_ROOT_PORT(dinfo->address),
-				SATA_PORT_NUMBER(dinfo->address));
-		/* heuristics: */
-		if (SATA_PORT_NUMBER(dinfo->address) != NO_PORT_MULT)
-			if (ata_msg_probe(winfo->ataport))
-				ata_dev_printk(winfo->atadev,
-					KERN_DEBUG, "warning: don't"
-					" know how to handle SATA port"
-					" multiplier\n");
-		if (SATA_ROOT_PORT(dinfo->address) ==
-			winfo->ataport->port_no &&
-		    SATA_PORT_NUMBER(dinfo->address) == NO_PORT_MULT) {
-			if (ata_msg_probe(winfo->ataport))
-				ata_dev_printk(winfo->atadev,
-					KERN_DEBUG,
-					"THIS ^^^^^ is the requested"
-					" SATA drive (handle = 0x%p)\n",
-					handle);
-			winfo->sata_adr = dinfo->address;
-			winfo->obj_handle = handle;
-		}
+		dev->acpi_handle = acpi_get_child(ap->acpi_handle, i);
 	}
-out:
-	kfree(dinfo);
-out2:
-	kfree(pathname);
-
-ret:
-	return status;
 }
 
-/* Get the SATA drive _ADR object. */
-static int get_sata_adr(struct device *dev, acpi_handle handle,
-			acpi_integer pcidevfn, unsigned int drive,
-			struct ata_port *ap,
-			struct ata_device *atadev, u32 *dev_adr)
+/**
+ * ata_acpi_associate - associate ATA host with ACPI objects
+ * @host: target ATA host
+ *
+ * Look up ACPI objects associated with @host and initialize
+ * acpi_handle fields of @host, its ports and devices accordingly.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+void ata_acpi_associate(struct ata_host *host)
 {
-	acpi_status	status;
-	struct walk_info *winfo;
-	int		err = -ENOMEM;
+	int i;
 
-	winfo = kzalloc(sizeof(struct walk_info), GFP_KERNEL);
-	if (!winfo)
-		goto out;
+	if (!is_pci_dev(host->dev) || libata_noacpi)
+		return;
 
-	winfo->dev = dev;
-	winfo->atadev = atadev;
-	winfo->ataport = ap;
-	if (acpi_bus_get_device(handle, &winfo->adev) < 0)
-		if (ata_msg_probe(ap))
-			ata_dev_printk(winfo->atadev, KERN_DEBUG,
-				"acpi_bus_get_device failed\n");
-	winfo->handle = handle;
-	winfo->pcidevfn = pcidevfn;
-	winfo->drivenum = drive;
+	host->acpi_handle = DEVICE_ACPI_HANDLE(host->dev);
+	if (!host->acpi_handle)
+		return;
 
-	status = acpi_get_devices(NULL, get_devices, winfo, NULL);
-	if (ACPI_FAILURE(status)) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(winfo->atadev, KERN_DEBUG,
-				"%s: acpi_get_devices failed\n",
-				__FUNCTION__);
-		err = -ENODEV;
-	} else {
-		*dev_adr = winfo->sata_adr;
-		atadev->obj_handle = winfo->obj_handle;
-		err = 0;
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		if (host->ports[0]->flags & ATA_FLAG_ACPI_SATA)
+			ata_acpi_associate_sata_port(ap);
+		else
+			ata_acpi_associate_ide_port(ap);
 	}
-	kfree(winfo);
-out:
-	return err;
 }
 
 /**

@@ -290,20 +122,15 @@ static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length,
 {
 	struct ata_port *ap = dev->ap;
 	acpi_status status;
-	acpi_handle dev_handle = NULL;
-	acpi_handle chan_handle, drive_handle;
-	acpi_integer pcidevfn = 0;
-	u32 dev_adr;
 	struct acpi_buffer output;
 	union acpi_object *out_obj;
-	struct device *gdev = ap->host->dev;
 	int err = -ENODEV;
 
 	*gtf_length = 0;
 	*gtf_address = 0UL;
 	*obj_loc = 0UL;
 
-	if (libata_noacpi)
+	if (!dev->acpi_handle)
 		return 0;
 
 	if (ata_msg_probe(ap))

@@ -319,78 +146,14 @@ static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length,
 		goto out;
 	}
 
-	/* Don't continue if device has no _ADR method.
-	 * _GTF is intended for known motherboard devices. */
-	if (!(ap->flags & ATA_FLAG_ACPI_SATA)) {
-		err = pata_get_dev_handle(gdev, &dev_handle, &pcidevfn);
-		if (err < 0) {
-			if (ata_msg_probe(ap))
-				ata_dev_printk(dev, KERN_DEBUG,
-					"%s: pata_get_dev_handle failed (%d)\n",
-					__FUNCTION__, err);
-			goto out;
-		}
-	} else {
-		err = sata_get_dev_handle(gdev, &dev_handle, &pcidevfn);
-		if (err < 0) {
-			if (ata_msg_probe(ap))
-				ata_dev_printk(dev, KERN_DEBUG,
-					"%s: sata_get_dev_handle failed (%d\n",
-					__FUNCTION__, err);
-			goto out;
-		}
-	}
-
-	/* Get this drive's _ADR info. if not already known. */
-	if (!dev->obj_handle) {
-		if (!(ap->flags & ATA_FLAG_ACPI_SATA)) {
-			/* get child objects of dev_handle == channel objects,
-	 		 * + _their_ children == drive objects */
-			/* channel is ap->port_no */
-			chan_handle = acpi_get_child(dev_handle,
-						ap->port_no);
-			if (ata_msg_probe(ap))
-				ata_dev_printk(dev, KERN_DEBUG,
-					"%s: chan adr=%d: chan_handle=0x%p\n",
-					__FUNCTION__, ap->port_no,
-					chan_handle);
-			if (!chan_handle) {
-				err = -ENODEV;
-				goto out;
-			}
-			/* TBD: could also check ACPI object VALID bits */
-			drive_handle = acpi_get_child(chan_handle, dev->devno);
-			if (!drive_handle) {
-				err = -ENODEV;
-				goto out;
-			}
-			dev_adr = dev->devno;
-			dev->obj_handle = drive_handle;
-		} else {	/* for SATA mode */
-			dev_adr = SATA_ADR_RSVD;
-			err = get_sata_adr(gdev, dev_handle, pcidevfn, 0,
-					ap, dev, &dev_adr);
-		}
-		if (err < 0 || dev_adr == SATA_ADR_RSVD ||
-		    !dev->obj_handle) {
-			if (ata_msg_probe(ap))
-				ata_dev_printk(dev, KERN_DEBUG,
-					"%s: get_sata/pata_adr failed: "
-					"err=%d, dev_adr=%u, obj_handle=0x%p\n",
-					__FUNCTION__, err, dev_adr,
-					dev->obj_handle);
-			goto out;
-		}
-	}
-
 	/* Setting up output buffer */
 	output.length = ACPI_ALLOCATE_BUFFER;
 	output.pointer = NULL;	/* ACPI-CA sets this; save/free it later */
 
 	/* _GTF has no input parameters */
 	err = -EIO;
-	status = acpi_evaluate_object(dev->obj_handle, "_GTF",
-					NULL, &output);
+	status = acpi_evaluate_object(dev->acpi_handle, "_GTF",
+				      NULL, &output);
 	if (ACPI_FAILURE(status)) {
 		if (ata_msg_probe(ap))
 			ata_dev_printk(dev, KERN_DEBUG,

@@ -528,7 +291,7 @@ static int do_drive_set_taskfiles(struct ata_device *dev,
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
 			       __FUNCTION__, ap->port_no);
 
-	if (libata_noacpi || !(ap->flags & ATA_FLAG_ACPI_SATA))
+	if (!(ap->flags & ATA_FLAG_ACPI_SATA))
 		return 0;
 
 	if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED))

@@ -571,8 +334,6 @@ int ata_acpi_exec_tfs(struct ata_port *ap)
 	unsigned long gtf_address;
 	unsigned long obj_loc;
 
-	if (libata_noacpi)
-		return 0;
 	/*
 	 * TBD - implement PATA support.  For now,
 	 * we should not run GTF on PATA devices since some

@@ -624,16 +385,12 @@ int ata_acpi_exec_tfs(struct ata_port *ap)
 int ata_acpi_push_id(struct ata_device *dev)
 {
 	struct ata_port *ap = dev->ap;
-	acpi_handle handle;
-	acpi_integer pcidevfn;
 	int err;
-	struct device *gdev = ap->host->dev;
-	u32 dev_adr;
 	acpi_status status;
 	struct acpi_object_list input;
 	union acpi_object in_params[1];
 
-	if (libata_noacpi)
+	if (!dev->acpi_handle)
 		return 0;
 
 	if (ata_msg_probe(ap))

@@ -648,34 +405,6 @@ int ata_acpi_push_id(struct ata_device *dev)
 		goto out;
 	}
 
-	/* Don't continue if device has no _ADR method.
-	 * _SDD is intended for known motherboard devices. */
-	err = sata_get_dev_handle(gdev, &handle, &pcidevfn);
-	if (err < 0) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(dev, KERN_DEBUG,
-				"%s: sata_get_dev_handle failed (%d\n",
-				__FUNCTION__, err);
-		goto out;
-	}
-
-	/* Get this drive's _ADR info, if not already known */
-	if (!dev->obj_handle) {
-		dev_adr = SATA_ADR_RSVD;
-		err = get_sata_adr(gdev, handle, pcidevfn, dev->devno, ap, dev,
-					&dev_adr);
-		if (err < 0 || dev_adr == SATA_ADR_RSVD ||
-			!dev->obj_handle) {
-			if (ata_msg_probe(ap))
-				ata_dev_printk(dev, KERN_DEBUG,
-					"%s: get_sata_adr failed: "
-					"err=%d, dev_adr=%u, obj_handle=0x%p\n",
-					__FUNCTION__, err, dev_adr,
-					dev->obj_handle);
-			goto out;
-		}
-	}
-
 	/* Give the drive Identify data to the drive via the _SDD method */
 	/* _SDD: set up input parameters */
 	input.count = 1;

@@ -687,7 +416,7 @@ int ata_acpi_push_id(struct ata_device *dev)
 
 	/* It's OK for _SDD to be missing too. */
 	swap_buf_le16(dev->id, ATA_ID_WORDS);
-	status = acpi_evaluate_object(dev->obj_handle, "_SDD", &input, NULL);
+	status = acpi_evaluate_object(dev->acpi_handle, "_SDD", &input, NULL);
 	swap_buf_le16(dev->id, ATA_ID_WORDS);
 
 	err = ACPI_FAILURE(status) ? -EIO : 0;

index d5939e6..bdb689e 100644
@@ -6311,6 +6311,9 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 	if (rc)
 		return rc;
 
+	/* associate with ACPI nodes */
+	ata_acpi_associate(host);
+
 	/* set cable, sata_spd_limit and report */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];

index 13cb0c9..00f6997 100644
@@ -99,9 +99,11 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host);
 
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
+extern void ata_acpi_associate(struct ata_host *host);
 extern int ata_acpi_exec_tfs(struct ata_port *ap);
 extern int ata_acpi_push_id(struct ata_device *dev);
 #else
+static inline void ata_acpi_associate(struct ata_host *host) { }
 static inline int ata_acpi_exec_tfs(struct ata_port *ap)
 {
 	return 0;

index 9b2122d..43611c7 100644
@@ -364,6 +364,9 @@ struct ata_host {
 	void			*private_data;
 	const struct ata_port_operations *ops;
 	unsigned long		flags;
+#ifdef CONFIG_ATA_ACPI
+	acpi_handle		acpi_handle;
+#endif
 	struct ata_port		*simplex_claimed;	/* channel owning the DMA */
 	struct ata_port		*ports[0];
 };

@@ -430,6 +433,9 @@ struct ata_device {
 	unsigned int		devno;		/* 0 or 1 */
 	unsigned long		flags;		/* ATA_DFLAG_xxx */
 	struct scsi_device	*sdev;		/* attached SCSI device */
+#ifdef CONFIG_ATA_ACPI
+	acpi_handle		acpi_handle;
+#endif
 	/* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */
 	u64			n_sectors;	/* size of device, if ATA */
 	unsigned int		class;		/* ATA_DEV_xxx */

@@ -458,10 +464,6 @@ struct ata_device {
 	struct ata_ering	ering;
 	int			spdn_cnt;
 	unsigned int		horkage;	/* List of broken features */
-#ifdef CONFIG_ATA_ACPI
-	/* ACPI objects info */
-	acpi_handle obj_handle;
-#endif
 };
 
 /* Offset into struct ata_device.  Fields above it are maintained

@@ -550,6 +552,9 @@ struct ata_port {
 
 	void			*private_data;
 
+#ifdef CONFIG_ATA_ACPI
+	acpi_handle		acpi_handle;
+#endif
 	u8			sector_buf[ATA_SECT_SIZE]; /* owned by EH */
 };
 

index eda4263..4d36d25 100644
@@ -28,9 +28,9 @@
 #define SATA_ADR(root,pmp)	(((root) << 16) | (pmp))
 
 #define REGS_PER_GTF		7
-struct taskfile_array {
-	u8	tfa[REGS_PER_GTF];	/* regs. 0x1f1 - 0x1f7 */
-};
+struct ata_acpi_gtf {
+	u8	tf[REGS_PER_GTF];	/* regs. 0x1f1 - 0x1f7 */
+} __packed;
 
 /*
  *	Helper - belongs in the PCI layer somewhere eventually

@@ -101,10 +101,10 @@ void ata_acpi_associate(struct ata_host *host)
 }
 
 /**
- * do_drive_get_GTF - get the drive bootup default taskfile settings
+ * ata_dev_get_GTF - get the drive bootup default taskfile settings
  * @dev: target ATA device
- * @gtf_length: number of bytes of _GTF data returned at @gtf_address
- * @gtf_address: buffer containing _GTF taskfile arrays
+ * @gtf: output parameter for buffer containing _GTF taskfile arrays
+ * @ptr_to_free: pointer which should be freed
  *
  * This applies to both PATA and SATA drives.
  *

@@ -114,24 +114,28 @@ void ata_acpi_associate(struct ata_host *host)
  * The <variable number> is not known in advance, so have ACPI-CA
  * allocate the buffer as needed and return it, then free it later.
  *
- * The returned @gtf_length and @gtf_address are only valid if the
- * function return value is 0.
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * Number of taskfiles on success, 0 if _GTF doesn't exist or doesn't
+ * contain valid data.  -errno on other errors.
  */
-static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length,
-			    unsigned long *gtf_address, unsigned long *obj_loc)
+static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf,
+			   void **ptr_to_free)
 {
 	struct ata_port *ap = dev->ap;
 	acpi_status status;
 	struct acpi_buffer output;
 	union acpi_object *out_obj;
-	int err = -ENODEV;
+	int rc = 0;
 
-	*gtf_length = 0;
-	*gtf_address = 0UL;
-	*obj_loc = 0UL;
+	/* set up output buffer */
+	output.length = ACPI_ALLOCATE_BUFFER;
+	output.pointer = NULL;	/* ACPI-CA sets this; save/free it later */
 
 	if (!dev->acpi_handle)
-		return 0;
+		goto out_free;
 
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",

@@ -143,23 +147,20 @@ static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length,
 				"ata_dev_present: %d, PORT_DISABLED: %lu\n",
 				__FUNCTION__, ata_dev_enabled(dev),
 				ap->flags & ATA_FLAG_DISABLED);
-		goto out;
+		goto out_free;
 	}
 
-	/* Setting up output buffer */
-	output.length = ACPI_ALLOCATE_BUFFER;
-	output.pointer = NULL;	/* ACPI-CA sets this; save/free it later */
-
 	/* _GTF has no input parameters */
-	err = -EIO;
-	status = acpi_evaluate_object(dev->acpi_handle, "_GTF",
-				      NULL, &output);
+	status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
+
 	if (ACPI_FAILURE(status)) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(dev, KERN_DEBUG,
-				"%s: Run _GTF error: status = 0x%x\n",
-				__FUNCTION__, status);
-		goto out;
+		if (status != AE_NOT_FOUND) {
+			ata_dev_printk(dev, KERN_WARNING,
+				       "_GTF evaluation failed (AE 0x%x)\n",
+				       status);
+			rc = -EIO;
+		}
+		goto out_free;
 	}
 
 	if (!output.length || !output.pointer) {

@@ -169,43 +170,43 @@ static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length,
 				__FUNCTION__,
 				(unsigned long long)output.length,
 				output.pointer);
-		kfree(output.pointer);
-		goto out;
+		goto out_free;
 	}
 
 	out_obj = output.pointer;
 	if (out_obj->type != ACPI_TYPE_BUFFER) {
-		kfree(output.pointer);
 		if (ata_msg_probe(ap))
 			ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
 				"error: expected object type of "
 				" ACPI_TYPE_BUFFER, got 0x%x\n",
 				__FUNCTION__, out_obj->type);
-		err = -ENOENT;
-		goto out;
+		rc = -EINVAL;
+		goto out_free;
 	}
 
-	if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
-	    out_obj->buffer.length % REGS_PER_GTF) {
+	if (out_obj->buffer.length % REGS_PER_GTF) {
 		if (ata_msg_drv(ap))
 			ata_dev_printk(dev, KERN_ERR,
 				"%s: unexpected GTF length (%d) or addr (0x%p)\n",
 				__FUNCTION__, out_obj->buffer.length,
 				out_obj->buffer.pointer);
-		err = -ENOENT;
-		goto out;
+		rc = -EINVAL;
+		goto out_free;
 	}
 
-	*gtf_length = out_obj->buffer.length;
-	*gtf_address = (unsigned long)out_obj->buffer.pointer;
-	*obj_loc = (unsigned long)out_obj;
+	*ptr_to_free = out_obj;
+	*gtf = (void *)out_obj->buffer.pointer;
+	rc = out_obj->buffer.length / REGS_PER_GTF;
+
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: returning "
-			"gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n",
-			__FUNCTION__, *gtf_length, *gtf_address, *obj_loc);
-	err = 0;
-out:
-	return err;
+			"gtf=%p, gtf_count=%d, ptr_to_free=%p\n",
+			__FUNCTION__, *gtf, rc, *ptr_to_free);
+	return rc;
+
+ out_free:
+	kfree(output.pointer);
+	return rc;
 }
 
 /**

@@ -224,68 +225,78 @@ out:
  * function also waits for idle after writing control and before
  * writing the remaining registers.
  *
- * LOCKING: TBD:
- * Inherited from caller.
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
  */
-static void taskfile_load_raw(struct ata_device *dev,
-			      const struct taskfile_array *gtf)
+static int taskfile_load_raw(struct ata_device *dev,
+			      const struct ata_acpi_gtf *gtf)
 {
 	struct ata_port *ap = dev->ap;
-	struct ata_taskfile tf;
-	unsigned int err;
+	struct ata_taskfile tf, rtf;
+	unsigned int err_mask;
 
-	if (ata_msg_probe(ap))
-		ata_dev_printk(dev, KERN_DEBUG, "%s: (0x1f1-1f7): hex: "
-			"%02x %02x %02x %02x %02x %02x %02x\n",
-			__FUNCTION__,
-			gtf->tfa[0], gtf->tfa[1], gtf->tfa[2],
-			gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]);
-
-	if ((gtf->tfa[0] == 0) && (gtf->tfa[1] == 0) && (gtf->tfa[2] == 0)
-	    && (gtf->tfa[3] == 0) && (gtf->tfa[4] == 0) && (gtf->tfa[5] == 0)
-	    && (gtf->tfa[6] == 0))
-		return;
+	if ((gtf->tf[0] == 0) && (gtf->tf[1] == 0) && (gtf->tf[2] == 0)
+	    && (gtf->tf[3] == 0) && (gtf->tf[4] == 0) && (gtf->tf[5] == 0)
+	    && (gtf->tf[6] == 0))
+		return 0;
 
 	ata_tf_init(dev, &tf);
 
 	/* convert gtf to tf */
 	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; /* TBD */
 	tf.protocol = ATA_PROT_NODATA;
-	tf.feature = gtf->tfa[0];	/* 0x1f1 */
-	tf.nsect   = gtf->tfa[1];	/* 0x1f2 */
-	tf.lbal    = gtf->tfa[2];	/* 0x1f3 */
-	tf.lbam    = gtf->tfa[3];	/* 0x1f4 */
-	tf.lbah    = gtf->tfa[4];	/* 0x1f5 */
-	tf.device  = gtf->tfa[5];	/* 0x1f6 */
-	tf.command = gtf->tfa[6];	/* 0x1f7 */
-
-	err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
-	if (err && ata_msg_probe(ap))
+	tf.feature = gtf->tf[0];	/* 0x1f1 */
+	tf.nsect   = gtf->tf[1];	/* 0x1f2 */
+	tf.lbal    = gtf->tf[2];	/* 0x1f3 */
+	tf.lbam    = gtf->tf[3];	/* 0x1f4 */
+	tf.lbah    = gtf->tf[4];	/* 0x1f5 */
+	tf.device  = gtf->tf[5];	/* 0x1f6 */
+	tf.command = gtf->tf[6];	/* 0x1f7 */
+
+	if (ata_msg_probe(ap))
+		ata_dev_printk(dev, KERN_DEBUG, "executing ACPI cmd "
+			       "%02x/%02x:%02x:%02x:%02x:%02x:%02x\n",
+			       tf.command, tf.feature, tf.nsect,
+			       tf.lbal, tf.lbam, tf.lbah, tf.device);
+
+	rtf = tf;
+	err_mask = ata_exec_internal(dev, &rtf, NULL, DMA_NONE, NULL, 0);
+	if (err_mask) {
 		ata_dev_printk(dev, KERN_ERR,
-			"%s: ata_exec_internal failed: %u\n",
-			__FUNCTION__, err);
+			"ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x failed "
+			"(Emask=0x%x Stat=0x%02x Err=0x%02x)\n",
+			tf.command, tf.feature, tf.nsect, tf.lbal, tf.lbam,
+			tf.lbah, tf.device, err_mask, rtf.command, rtf.feature);
+		return -EIO;
+	}
+
+	return 0;
 }
 
 /**
- * do_drive_set_taskfiles - write the drive taskfile settings from _GTF
+ * ata_dev_set_taskfiles - write the drive taskfile settings from _GTF
  * @dev: target ATA device
- * @gtf_length: total number of bytes of _GTF taskfiles
- * @gtf_address: location of _GTF taskfile arrays
+ * @gtf: pointer to array of _GTF taskfiles to execute
+ * @gtf_count: number of taskfiles
  *
  * This applies to both PATA and SATA drives.
  *
- * Write {gtf_address, length gtf_length} in groups of
- * REGS_PER_GTF bytes.
+ * Execute taskfiles in @gtf.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
  */
-static int do_drive_set_taskfiles(struct ata_device *dev,
-				  unsigned int gtf_length,
-				  unsigned long gtf_address)
+static int ata_dev_set_taskfiles(struct ata_device *dev,
+				 struct ata_acpi_gtf *gtf, int gtf_count)
 {
 	struct ata_port *ap = dev->ap;
-	int err = -ENODEV;
-	int gtf_count = gtf_length / REGS_PER_GTF;
 	int ix;
-	struct taskfile_array	*gtf;
 
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",

@@ -295,29 +306,13 @@ static int do_drive_set_taskfiles(struct ata_device *dev,
 		return 0;
 
 	if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED))
-		goto out;
-	if (!gtf_count)		/* shouldn't be here */
-		goto out;
-
-	if (gtf_length % REGS_PER_GTF) {
-		if (ata_msg_drv(ap))
-			ata_dev_printk(dev, KERN_ERR,
-				"%s: unexpected GTF length (%d)\n",
-				__FUNCTION__, gtf_length);
-		goto out;
-	}
+		return -ENODEV;
 
-	for (ix = 0; ix < gtf_count; ix++) {
-		gtf = (struct taskfile_array *)
-			(gtf_address + ix * REGS_PER_GTF);
+	/* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
+	for (ix = 0; ix < gtf_count; ix++)
+		 taskfile_load_raw(dev, gtf++);
 
-		/* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
-		taskfile_load_raw(dev, gtf);
-	}
-
-	err = 0;
-out:
-	return err;
+	return 0;
 }
 
 /**

@@ -328,11 +323,7 @@ out:
  */
 int ata_acpi_exec_tfs(struct ata_port *ap)
 {
-	int ix;
-	int ret = 0;
-	unsigned int gtf_length;
-	unsigned long gtf_address;
-	unsigned long obj_loc;
+	int ix, ret = 0;
 
 	/*
 	 * TBD - implement PATA support.  For now,

@@ -344,12 +335,16 @@ int ata_acpi_exec_tfs(struct ata_port *ap)
 
 	for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {
 		struct ata_device *dev = &ap->device[ix];
+		struct ata_acpi_gtf *gtf = NULL;
+		int gtf_count;
+		void *ptr_to_free = NULL;
 
 		if (!ata_dev_enabled(dev))
 			continue;
 
-		ret = do_drive_get_GTF(dev, &gtf_length, &gtf_address,
-				       &obj_loc);
+		ret = ata_dev_get_GTF(dev, &gtf, &ptr_to_free);
+		if (ret == 0)
+			continue;
 		if (ret < 0) {
 			if (ata_msg_probe(ap))
 				ata_port_printk(ap, KERN_DEBUG,

@@ -357,9 +352,10 @@ int ata_acpi_exec_tfs(struct ata_port *ap)
 					__FUNCTION__, ret);
 			break;
 		}
+		gtf_count = ret;
 
-		ret = do_drive_set_taskfiles(dev, gtf_length, gtf_address);
-		kfree((void *)obj_loc);
+		ret = ata_dev_set_taskfiles(dev, gtf, gtf_count);
+		kfree(ptr_to_free);
 		if (ret < 0) {
 			if (ata_msg_probe(ap))
 				ata_port_printk(ap, KERN_DEBUG,

index 4d36d25..ae2077e 100644
@@ -175,21 +175,17 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf,
 
 	out_obj = output.pointer;
 	if (out_obj->type != ACPI_TYPE_BUFFER) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
-				"error: expected object type of "
-				" ACPI_TYPE_BUFFER, got 0x%x\n",
-				__FUNCTION__, out_obj->type);
+		ata_dev_printk(dev, KERN_WARNING,
+			       "_GTF unexpected object type 0x%x\n",
+			       out_obj->type);
 		rc = -EINVAL;
 		goto out_free;
 	}
 
 	if (out_obj->buffer.length % REGS_PER_GTF) {
-		if (ata_msg_drv(ap))
-			ata_dev_printk(dev, KERN_ERR,
-				"%s: unexpected GTF length (%d) or addr (0x%p)\n",
-				__FUNCTION__, out_obj->buffer.length,
-				out_obj->buffer.pointer);
+		ata_dev_printk(dev, KERN_WARNING,
+			       "unexpected _GTF length (%d)\n",
+			       out_obj->buffer.length);
 		rc = -EINVAL;
 		goto out_free;
 	}

@@ -320,6 +316,12 @@ static int ata_dev_set_taskfiles(struct ata_device *dev,
  * @ap: the ata_port for the drive
  *
  * This applies to both PATA and SATA drives.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
  */
 int ata_acpi_exec_tfs(struct ata_port *ap)
 {

@@ -345,24 +347,14 @@ int ata_acpi_exec_tfs(struct ata_port *ap)
 		ret = ata_dev_get_GTF(dev, &gtf, &ptr_to_free);
 		if (ret == 0)
 			continue;
-		if (ret < 0) {
-			if (ata_msg_probe(ap))
-				ata_port_printk(ap, KERN_DEBUG,
-					"%s: get_GTF error (%d)\n",
-					__FUNCTION__, ret);
+		if (ret < 0)
 			break;
-		}
 		gtf_count = ret;
 
 		ret = ata_dev_set_taskfiles(dev, gtf, gtf_count);
 		kfree(ptr_to_free);
-		if (ret < 0) {
-			if (ata_msg_probe(ap))
-				ata_port_printk(ap, KERN_DEBUG,
-					"%s: set_taskfiles error (%d)\n",
-					__FUNCTION__, ret);
+		if (ret < 0)
 			break;
-		}
 	}
 
 	return ret;

@@ -377,6 +369,12 @@ int ata_acpi_exec_tfs(struct ata_port *ap)
  * ATM this function never returns a failure.  It is an optional
  * method and if it fails for whatever reason, we should still
  * just keep going.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
  */
 int ata_acpi_push_id(struct ata_device *dev)
 {

@@ -416,12 +414,9 @@ int ata_acpi_push_id(struct ata_device *dev)
 	swap_buf_le16(dev->id, ATA_ID_WORDS);
 
 	err = ACPI_FAILURE(status) ? -EIO : 0;
-	if (err < 0) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(dev, KERN_DEBUG,
-				       "%s _SDD error: status = 0x%x\n",
-				       __FUNCTION__, status);
-	}
+	if (err < 0)
+		ata_dev_printk(dev, KERN_WARNING,
+			       "ACPI _SDD failed (AE 0x%x)\n", status);
 
 	/* always return success */
 out:

index ae2077e..e09df44 100644
@@ -273,91 +273,47 @@ static int taskfile_load_raw(struct ata_device *dev,
 }
 
 /**
- * ata_dev_set_taskfiles - write the drive taskfile settings from _GTF
- * @dev: target ATA device
- * @gtf: pointer to array of _GTF taskfiles to execute
- * @gtf_count: number of taskfiles
- *
- * This applies to both PATA and SATA drives.
- *
- * Execute taskfiles in @gtf.
- *
- * LOCKING:
- * EH context.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-static int ata_dev_set_taskfiles(struct ata_device *dev,
-				 struct ata_acpi_gtf *gtf, int gtf_count)
-{
-	struct ata_port *ap = dev->ap;
-	int ix;
-
-	if (ata_msg_probe(ap))
-		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
-			       __FUNCTION__, ap->port_no);
-
-	if (!(ap->flags & ATA_FLAG_ACPI_SATA))
-		return 0;
-
-	if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED))
-		return -ENODEV;
-
-	/* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
-	for (ix = 0; ix < gtf_count; ix++)
-		 taskfile_load_raw(dev, gtf++);
-
-	return 0;
-}
-
-/**
  * ata_acpi_exec_tfs - get then write drive taskfile settings
- * @ap: the ata_port for the drive
+ * @dev: target ATA device
  *
- * This applies to both PATA and SATA drives.
+ * Evaluate _GTF and excute returned taskfiles.
  *
  * LOCKING:
  * EH context.
  *
  * RETURNS:
- * 0 on success, -errno on failure.
+ * Number of executed taskfiles on success, 0 if _GTF doesn't exist or
+ * doesn't contain valid data.  -errno on other errors.
  */
-int ata_acpi_exec_tfs(struct ata_port *ap)
+static int ata_acpi_exec_tfs(struct ata_device *dev)
 {
-	int ix, ret = 0;
-
-	/*
-	 * TBD - implement PATA support.  For now,
-	 * we should not run GTF on PATA devices since some
-	 * PATA require execution of GTM/STM before GTF.
-	 */
-	if (!(ap->flags & ATA_FLAG_ACPI_SATA))
-		return 0;
-
-	for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {
-		struct ata_device *dev = &ap->device[ix];
-		struct ata_acpi_gtf *gtf = NULL;
-		int gtf_count;
-		void *ptr_to_free = NULL;
-
-		if (!ata_dev_enabled(dev))
-			continue;
-
-		ret = ata_dev_get_GTF(dev, &gtf, &ptr_to_free);
-		if (ret == 0)
-			continue;
-		if (ret < 0)
-			break;
-		gtf_count = ret;
-
-		ret = ata_dev_set_taskfiles(dev, gtf, gtf_count);
-		kfree(ptr_to_free);
-		if (ret < 0)
-			break;
+	struct ata_acpi_gtf *gtf = NULL;
+	void *ptr_to_free = NULL;
+	int gtf_count, i, rc;
+
+	/* get taskfiles */
+	rc = ata_dev_get_GTF(dev, &gtf, &ptr_to_free);
+	if (rc < 0)
+		return rc;
+	gtf_count = rc;
+
+	/* execute them */
+	for (i = 0, rc = 0; i < gtf_count; i++) {
+		int tmp;
+
+		/* ACPI errors are eventually ignored.  Run till the
+		 * end even after errors.
+		 */
+		tmp = taskfile_load_raw(dev, gtf++);
+		if (!rc)
+			rc = tmp;
 	}
 
-	return ret;
+	kfree(ptr_to_free);
+
+	if (rc == 0)
+		return gtf_count;
+	return rc;
 }
 
 /**

@@ -376,7 +332,7 @@ int ata_acpi_exec_tfs(struct ata_port *ap)
  * RETURNS:
  * 0 on success, -errno on failure.
  */
-int ata_acpi_push_id(struct ata_device *dev)
+static int ata_acpi_push_id(struct ata_device *dev)
 {
 	struct ata_port *ap = dev->ap;
 	int err;

@@ -396,7 +352,7 @@ int ata_acpi_push_id(struct ata_device *dev)
 		if (ata_msg_probe(ap))
 			ata_dev_printk(dev, KERN_DEBUG,
 				"%s: Not a SATA device\n", __FUNCTION__);
-		goto out;
+		return 0;
 	}
 
 	/* Give the drive Identify data to the drive via the _SDD method */

@@ -418,9 +374,99 @@ int ata_acpi_push_id(struct ata_device *dev)
 		ata_dev_printk(dev, KERN_WARNING,
 			       "ACPI _SDD failed (AE 0x%x)\n", status);
 
-	/* always return success */
-out:
-	return 0;
+	return err;
+}
+
+/**
+ * ata_acpi_on_resume - ATA ACPI hook called on resume
+ * @ap: target ATA port
+ *
+ * This function is called when @ap is resumed - right after port
+ * itself is resumed but before any EH action is taken.
+ *
+ * LOCKING:
+ * EH context.
+ */
+void ata_acpi_on_resume(struct ata_port *ap)
+{
+	int i;
+
+	/* schedule _GTF */
+	for (i = 0; i < ATA_MAX_DEVICES; i++)
+		ap->device[i].flags |= ATA_DFLAG_ACPI_PENDING;
 }
 
+/**
+ * ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration
+ * @dev: target ATA device
+ *
+ * This function is called when @dev is about to be configured.
+ * IDENTIFY data might have been modified after this hook is run.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * Positive number if IDENTIFY data needs to be refreshed, 0 if not,
+ * -errno on failure.
+ */
+int ata_acpi_on_devcfg(struct ata_device *dev)
+{
+	struct ata_port *ap = dev->ap;
+	struct ata_eh_context *ehc = &ap->eh_context;
+	int acpi_sata = ap->flags & ATA_FLAG_ACPI_SATA;
+	int rc;
+
+	/* XXX: _STM isn't implemented yet, skip if IDE for now */
+	if (!acpi_sata)
+		return 0;
 
+	if (!dev->acpi_handle)
+		return 0;
+
+	/* do we need to do _GTF? */
+	if (!(dev->flags & ATA_DFLAG_ACPI_PENDING) &&
+	    !(acpi_sata && (ehc->i.flags & ATA_EHI_DID_HARDRESET)))
+		return 0;
+
+	/* do _SDD if SATA */
+	if (acpi_sata) {
+		rc = ata_acpi_push_id(dev);
+		if (rc)
+			goto acpi_err;
+	}
+
+	/* do _GTF */
+	rc = ata_acpi_exec_tfs(dev);
+	if (rc < 0)
+		goto acpi_err;
+
+	dev->flags &= ~ATA_DFLAG_ACPI_PENDING;
+
+	/* refresh IDENTIFY page if any _GTF command has been executed */
+	if (rc > 0) {
+		rc = ata_dev_reread_id(dev, 0);
+		if (rc < 0) {
+			ata_dev_printk(dev, KERN_ERR, "failed to IDENTIFY "
+				       "after ACPI commands\n");
+			return rc;
+		}
+	}
+
+	return 0;
+
+ acpi_err:
+	/* let EH retry on the first failure, disable ACPI on the second */
+	if (dev->flags & ATA_DFLAG_ACPI_FAILED) {
+		ata_dev_printk(dev, KERN_WARNING, "ACPI on devcfg failed the "
+			       "second time, disabling (errno=%d)\n", rc);
+
+		dev->acpi_handle = NULL;
+
+		/* if port is working, request IDENTIFY reload and continue */
+		if (!(ap->pflags & ATA_PFLAG_FROZEN))
+			rc = 1;
+	}
+	dev->flags |= ATA_DFLAG_ACPI_FAILED;
+	return rc;
+}

index bdb689e..b804daf 100644
@@ -1851,7 +1851,8 @@ static void ata_dev_config_ncq(struct ata_device *dev,
 int ata_dev_configure(struct ata_device *dev)
 {
 	struct ata_port *ap = dev->ap;
-	int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO;
+	struct ata_eh_context *ehc = &ap->eh_context;
+	int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
 	const u16 *id = dev->id;
 	unsigned int xfer_mask;
 	char revbuf[7];		/* XYZ-99\0 */

@@ -1868,15 +1869,10 @@ int ata_dev_configure(struct ata_device *dev)
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
 
-	/* set _SDD */
-	rc = ata_acpi_push_id(dev);
-	if (rc) {
-		ata_dev_printk(dev, KERN_WARNING, "failed to set _SDD(%d)\n",
-			rc);
-	}
-
-	/* retrieve and execute the ATA task file of _GTF */
-	ata_acpi_exec_tfs(ap);
+	/* let ACPI work its magic */
+	rc = ata_acpi_on_devcfg(dev);
+	if (rc)
+		return rc;
 
 	/* print device capabilities */
 	if (ata_msg_probe(ap))

index 5309c31..415786f 100644
@@ -2210,6 +2210,9 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
 	if (ap->ops->port_resume)
 		rc = ap->ops->port_resume(ap);
 
+	/* tell ACPI that we're resuming */
+	ata_acpi_on_resume(ap);
+
 	/* report result */
 	spin_lock_irqsave(ap->lock, flags);
 	ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);

index 00f6997..3abd577 100644
@@ -100,18 +100,12 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host);
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
 extern void ata_acpi_associate(struct ata_host *host);
-extern int ata_acpi_exec_tfs(struct ata_port *ap);
-extern int ata_acpi_push_id(struct ata_device *dev);
+extern void ata_acpi_on_resume(struct ata_port *ap);
+extern int ata_acpi_on_devcfg(struct ata_device *adev);
 #else
 static inline void ata_acpi_associate(struct ata_host *host) { }
-static inline int ata_acpi_exec_tfs(struct ata_port *ap)
-{
-	return 0;
-}
-static inline int ata_acpi_push_id(struct ata_device *dev)
-{
-	return 0;
-}
+static inline void ata_acpi_on_resume(struct ata_port *ap) { }
+static inline int ata_acpi_on_devcfg(struct ata_device *adev) { return 0; }
 #endif
 
 /* libata-scsi.c */

index 43611c7..dca31c6 100644
@@ -136,6 +136,8 @@ enum {
 	ATA_DFLAG_CDB_INTR	= (1 << 2), /* device asserts INTRQ when ready for CDB */
 	ATA_DFLAG_NCQ		= (1 << 3), /* device supports NCQ */
 	ATA_DFLAG_FLUSH_EXT	= (1 << 4), /* do FLUSH_EXT instead of FLUSH */
+	ATA_DFLAG_ACPI_PENDING	= (1 << 5), /* ACPI resume action pending */
+	ATA_DFLAG_ACPI_FAILED	= (1 << 6), /* ACPI on devcfg has failed */
 	ATA_DFLAG_CFG_MASK	= (1 << 8) - 1,
 
 	ATA_DFLAG_PIO		= (1 << 8), /* device limited to PIO mode */

index e09df44..78db2e6 100644
@@ -134,22 +134,10 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf,
 	output.length = ACPI_ALLOCATE_BUFFER;
 	output.pointer = NULL;	/* ACPI-CA sets this; save/free it later */
 
-	if (!dev->acpi_handle)
-		goto out_free;
-
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
 			       __FUNCTION__, ap->port_no);
 
-	if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED)) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(dev, KERN_DEBUG, "%s: ERR: "
-				"ata_dev_present: %d, PORT_DISABLED: %lu\n",
-				__FUNCTION__, ata_dev_enabled(dev),
-				ap->flags & ATA_FLAG_DISABLED);
-		goto out_free;
-	}
-
 	/* _GTF has no input parameters */
 	status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
 

@@ -340,21 +328,10 @@ static int ata_acpi_push_id(struct ata_device *dev)
 	struct acpi_object_list input;
 	union acpi_object in_params[1];
 
-	if (!dev->acpi_handle)
-		return 0;
-
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
 			       __FUNCTION__, dev->devno, ap->port_no);
 
-	/* Don't continue if not a SATA device. */
-	if (!(ap->flags & ATA_FLAG_ACPI_SATA)) {
-		if (ata_msg_probe(ap))
-			ata_dev_printk(dev, KERN_DEBUG,
-				"%s: Not a SATA device\n", __FUNCTION__);
-		return 0;
-	}
-
 	/* Give the drive Identify data to the drive via the _SDD method */
 	/* _SDD: set up input parameters */
 	input.count = 1;

index 78db2e6..c059f78 100644
@@ -101,6 +101,108 @@ void ata_acpi_associate(struct ata_host *host)
 }
 
 /**
+ * ata_acpi_gtm - execute _GTM
+ * @ap: target ATA port
+ * @gtm: out parameter for _GTM result
+ *
+ * Evaluate _GTM and store the result in @gtm.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure.
+ */
+static int ata_acpi_gtm(const struct ata_port *ap, struct ata_acpi_gtm *gtm)
+{
+	struct acpi_buffer output = { .length = ACPI_ALLOCATE_BUFFER };
+	union acpi_object *out_obj;
+	acpi_status status;
+	int rc = 0;
+
+	status = acpi_evaluate_object(ap->acpi_handle, "_GTM", NULL, &output);
+
+	rc = -ENOENT;
+	if (status == AE_NOT_FOUND)
+		goto out_free;
+
+	rc = -EINVAL;
+	if (ACPI_FAILURE(status)) {
+		ata_port_printk(ap, KERN_ERR,
+				"ACPI get timing mode failed (AE 0x%x)\n",
+				status);
+		goto out_free;
+	}
+
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
+		ata_port_printk(ap, KERN_WARNING,
+				"_GTM returned unexpected object type 0x%x\n",
+				out_obj->type);
+
+		goto out_free;
+	}
+
+	if (out_obj->buffer.length != sizeof(struct ata_acpi_gtm)) {
+		ata_port_printk(ap, KERN_ERR,
+				"_GTM returned invalid length %d\n",
+				out_obj->buffer.length);
+		goto out_free;
+	}
+
+	memcpy(gtm, out_obj->buffer.pointer, sizeof(struct ata_acpi_gtm));
+	rc = 0;
+ out_free:
+	kfree(output.pointer);
+	return rc;
+}
+
+/**
+ * ata_acpi_stm - execute _STM
+ * @ap: target ATA port
+ * @stm: timing parameter to _STM
+ *
+ * Evaluate _STM with timing parameter @stm.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -ENOENT if _STM doesn't exist, -errno on failure.
+ */
+static int ata_acpi_stm(const struct ata_port *ap, struct ata_acpi_gtm *stm)
+{
+	acpi_status status;
+	struct acpi_object_list         input;
+	union acpi_object               in_params[3];
+
+	in_params[0].type = ACPI_TYPE_BUFFER;
+	in_params[0].buffer.length = sizeof(struct ata_acpi_gtm);
+	in_params[0].buffer.pointer = (u8 *)stm;
+	/* Buffers for id may need byteswapping ? */
+	in_params[1].type = ACPI_TYPE_BUFFER;
+	in_params[1].buffer.length = 512;
+	in_params[1].buffer.pointer = (u8 *)ap->device[0].id;
+	in_params[2].type = ACPI_TYPE_BUFFER;
+	in_params[2].buffer.length = 512;
+	in_params[2].buffer.pointer = (u8 *)ap->device[1].id;
+
+	input.count = 3;
+	input.pointer = in_params;
+
+	status = acpi_evaluate_object(ap->acpi_handle, "_STM", &input, NULL);
+
+	if (status == AE_NOT_FOUND)
+		return -ENOENT;
+	if (ACPI_FAILURE(status)) {
+		ata_port_printk(ap, KERN_ERR,
+			"ACPI set timing mode failed (status=0x%x)\n", status);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
  * ata_dev_get_GTF - get the drive bootup default taskfile settings
  * @dev: target ATA device
  * @gtf: output parameter for buffer containing _GTF taskfile arrays

@@ -355,6 +457,46 @@ static int ata_acpi_push_id(struct ata_device *dev)
 }
 
 /**
+ * ata_acpi_on_suspend - ATA ACPI hook called on suspend
+ * @ap: target ATA port
+ *
+ * This function is called when @ap is about to be suspended.  All
+ * devices are already put to sleep but the port_suspend() callback
+ * hasn't been executed yet.  Error return from this function aborts
+ * suspend.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+int ata_acpi_on_suspend(struct ata_port *ap)
+{
+	unsigned long flags;
+	int rc;
+
+	/* proceed iff per-port acpi_handle is valid */
+	if (!ap->acpi_handle)
+		return 0;
+	BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA);
+
+	/* store timing parameters */
+	rc = ata_acpi_gtm(ap, &ap->acpi_gtm);
+
+	spin_lock_irqsave(ap->lock, flags);
+	if (rc == 0)
+		ap->pflags |= ATA_PFLAG_GTM_VALID;
+	else
+		ap->pflags &= ~ATA_PFLAG_GTM_VALID;
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	if (rc == -ENOENT)
+		rc = 0;
+	return rc;
+}
+
+/**
  * ata_acpi_on_resume - ATA ACPI hook called on resume
  * @ap: target ATA port
  *

@@ -368,6 +510,13 @@ void ata_acpi_on_resume(struct ata_port *ap)
 {
 	int i;
 
+	if (ap->acpi_handle && (ap->pflags & ATA_PFLAG_GTM_VALID)) {
+		BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA);
+
+		/* restore timing parameters */
+		ata_acpi_stm(ap, &ap->acpi_gtm);
+	}
+
 	/* schedule _GTF */
 	for (i = 0; i < ATA_MAX_DEVICES; i++)
 		ap->device[i].flags |= ATA_DFLAG_ACPI_PENDING;

@@ -394,10 +543,6 @@ int ata_acpi_on_devcfg(struct ata_device *dev)
 	int acpi_sata = ap->flags & ATA_FLAG_ACPI_SATA;
 	int rc;
 
-	/* XXX: _STM isn't implemented yet, skip if IDE for now */
-	if (!acpi_sata)
-		return 0;
-
 	if (!dev->acpi_handle)
 		return 0;
 

index 415786f..b635eb8 100644
@@ -2157,19 +2157,25 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
 
 	WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED);
 
+	/* tell ACPI we're suspending */
+	rc = ata_acpi_on_suspend(ap);
+	if (rc)
+		goto out;
+
 	/* suspend */
 	ata_eh_freeze_port(ap);
 
 	if (ap->ops->port_suspend)
 		rc = ap->ops->port_suspend(ap, ap->pm_mesg);
 
+ out:
 	/* report result */
 	spin_lock_irqsave(ap->lock, flags);
 
 	ap->pflags &= ~ATA_PFLAG_PM_PENDING;
 	if (rc == 0)
 		ap->pflags |= ATA_PFLAG_SUSPENDED;
-	else
+	else if (ap->pflags & ATA_PFLAG_FROZEN)
 		ata_port_schedule_eh(ap);
 
 	if (ap->pm_result) {

index 3abd577..012fa1c 100644
@@ -100,10 +100,12 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host);
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
 extern void ata_acpi_associate(struct ata_host *host);
+extern int ata_acpi_on_suspend(struct ata_port *ap);
 extern void ata_acpi_on_resume(struct ata_port *ap);
 extern int ata_acpi_on_devcfg(struct ata_device *adev);
 #else
 static inline void ata_acpi_associate(struct ata_host *host) { }
+static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
 static inline void ata_acpi_on_resume(struct ata_port *ap) { }
 static inline int ata_acpi_on_devcfg(struct ata_device *adev) { return 0; }
 #endif

index dca31c6..8f23487 100644
@@ -198,6 +198,7 @@ enum {
 	ATA_PFLAG_FLUSH_PORT_TASK = (1 << 16), /* flush port task */
 	ATA_PFLAG_SUSPENDED	= (1 << 17), /* port is suspended (power) */
 	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */
+	ATA_PFLAG_GTM_VALID	= (1 << 19), /* acpi_gtm data valid */
 
 	/* struct ata_queued_cmd flags */
 	ATA_QCFLAG_ACTIVE	= (1 << 0), /* cmd not yet ack'd to scsi lyer */

@@ -494,6 +495,17 @@ struct ata_eh_context {
 	unsigned int		did_probe_mask;
 };
 
+struct ata_acpi_drive
+{
+	u32 pio;
+	u32 dma;
+} __packed;
+
+struct ata_acpi_gtm {
+	struct ata_acpi_drive drive[2];
+	u32 flags;
+} __packed;
+
 struct ata_port {
 	struct Scsi_Host	*scsi_host; /* our co-allocated scsi host */
 	const struct ata_port_operations *ops;

@@ -556,6 +568,7 @@ struct ata_port {
 
 #ifdef CONFIG_ATA_ACPI
 	acpi_handle		acpi_handle;
+	struct ata_acpi_gtm	acpi_gtm;
 #endif
 	u8			sector_buf[ATA_SECT_SIZE]; /* owned by EH */
 };