Skip to contentSkip to conversation

ALSA always writes _whole_ periods, right?

DISCUSSION Joachim Förster 2 participants 5 messages Jun 13, 2007 – Jun 27, 2007 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hi ALSA devs,

I have a quick question regarding the filling of the usual ring buffer in RAM (used by sound controllers via DMA), just to be really sure:

Is it true, that ALSA always writes (via mmap'ing) _whole_ periods?

I took snd-dummy and modified it to use "ack()" method and tried to confirm, if the above is true _without_ memory mapping (classical read/write). It seem's to be true, ALSA is "filling up" the last (not always complete) period - e.g. if the played wav file is not a multiple of periodsize in length.
But well, with mmap, I cannot see the copying action (done by ALSA library, right?) ... so, thus my question ;-) .

Thanks,
Joachim

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#1 lore raw

At Wed, 13 Jun 2007 18:23:38 +0200,

Quoted 7 lines · Joachim Förster

Hi ALSA devs,

I have a quick question regarding the filling of the usual ring buffer in RAM (used by sound controllers via DMA), just to be really sure:

Is it true, that ALSA always writes (via mmap'ing) _whole_ periods?

The whole buffer is, of course, used. Otherwise you'll get obvious noises :)

But if you're asking about the timinig, then no. How much data is written at which timing isn't strictly defined in mmap mode. The PCM core just checks the available size at each snd_pcm_period_elapsed(), and reports XRUN if needed. That's all.

Quoted 7 lines

I took snd-dummy and modified it to use "ack()" method and tried to confirm, if the above is true _without_ memory mapping (classical read/write). It seem's to be true, ALSA is "filling up" the last (not always complete) period - e.g. if the played wav file is not a multiple of periodsize in length.
But well, with mmap, I cannot see the copying action (done by ALSA library, right?) ... so, thus my question ;-) .

Right, copy / ack aren't involved with mmap mode...

Takashi

#2 lore raw

Hi Takashi,

thanks for your answer,

Quoted 5 lines · Takashi Iwai
Quoted 4 lines

I have a quick question regarding the filling of the usual ring buffer in RAM (used by sound controllers via DMA), just to be really sure:

Is it true, that ALSA always writes (via mmap'ing) _whole_ periods?

Quoted 7 lines

The whole buffer is, of course, used. Otherwise you'll get obvious noises :)

But if you're asking about the timinig, then no. How much data is written at which timing isn't strictly defined in mmap mode. The PCM core just checks the available size at each snd_pcm_period_elapsed(), and reports XRUN if needed. That's all.

Ok, ahm, I think my question was not about what I really wanted to know
- sorry. I have to reformulate it: In fact I would like to know, how the ALSA-library mmap code behaves regarding the last chunk of samples, for
example: Consider aplay, playing a wav file and the wav file's size/number of samples does _not_ fit to a multiple of a period's size. Then, does the mmap code copy these last samples as is _or_ does it copy one whole last period (which is filled with zeros)?

Thanks,
Joachim

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#3 lore raw

At Sat, 16 Jun 2007 23:35:15 +0200,

Quoted 19 lines · Joachim Förster

Hi Takashi,

thanks for your answer,

Quoted 5 lines · Takashi Iwai
Quoted 4 lines

I have a quick question regarding the filling of the usual ring buffer in RAM (used by sound controllers via DMA), just to be really sure:

Is it true, that ALSA always writes (via mmap'ing) _whole_ periods?

Quoted 7 lines

The whole buffer is, of course, used. Otherwise you'll get obvious noises :)

But if you're asking about the timinig, then no. How much data is written at which timing isn't strictly defined in mmap mode. The PCM core just checks the available size at each snd_pcm_period_elapsed(), and reports XRUN if needed. That's all.

Quoted 7 lines

Ok, ahm, I think my question was not about what I really wanted to know
- sorry. I have to reformulate it: In fact I would like to know, how the ALSA-library mmap code behaves regarding the last chunk of samples, for
example: Consider aplay, playing a wav file and the wav file's size/number of samples does _not_ fit to a multiple of a period's size. Then, does the mmap code copy these last samples as is _or_ does it copy one whole last period (which is filled with zeros)?

No, you have to fill silence by yourself before committing the mmap chunk. The mmap code itself doesn't care about it.

Takashi

A message that is not in the archive (sent off-list or not yet received): 1182677696.5697.25.camel@localhost

#5 lore raw

At Sun, 24 Jun 2007 11:34:56 +0200,

Quoted 14 lines · Joachim Förster

Hi Takashi,

thanks for your answer.

Quoted 8 lines · Takashi Iwai
Quoted 7 lines

Ok, ahm, I think my question was not about what I really wanted to know
- sorry. I have to reformulate it: In fact I would like to know, how the ALSA-library mmap code behaves regarding the last chunk of samples, for
example: Consider aplay, playing a wav file and the wav file's size/number of samples does _not_ fit to a multiple of a period's size. Then, does the mmap code copy these last samples as is _or_ does it copy one whole last period (which is filled with zeros)?

Quoted 6 lines
Quoted 2 lines

No, you have to fill silence by yourself before committing the mmap chunk. The mmap code itself doesn't care about it.

By "fill silence by yourself", you mean the application (user-space) which is using ALSA library (with mmap), right? So this is not in the responsibility of the sound driver, right?

Right. The driver has some functionality to fill silence automatically, but it's better to avoid to play with it :)

Quoted 5 lines

Hmmm, so if an application does _not_ transfer sound data in a multiple of period size, the _last_ "period" will be "incomplete". Then, my question is: Does ALSA expect to receive a call of snd_period_elapsed() after these last samples are played, although the it was _not_ a complete period?

I think it might depend on the hardware. Some hardwares are available to stop at the exact position, but most hardware are not. So, it's _safer_ to send always the data in the period size. And, yes, for the last period with less data, the app should fill the data to align to the period size.

Takashi