Skip to contentSkip to conversation

[Fwd: Re: default setting not fully working with new ALSA device]

Fwd: Re: default setting not fully working with new ALSA device Tobin Davis 1 participant 1 message Jul 5, 2007

lore
Share & tools
lore
#0 lore raw

-------- Forwarded Message --------
From: Peter Matthias <[email protected]>
To: Tobin Davis <[email protected]>
Subject: Re: [alsa-devel] default setting not fully working with new ALSA device
Date: Thu, 5 Jul 2007 18:34:08 +0200

The Board is a MSI K9AGM2-FIH, Sockel AM2, ATI RS690G, mATX, PCIe

The script gave following output:
"Your ALSA information is located at http://pastebin.ca/604529"

Other drivers are statically linked in my kernel.

Thank you for your work! In case of any questions, contact me.

Peter

Am Mittwoch, 4. Juli 2007 schrieben Sie:

Quoted 33 lines

Could you post the output from
http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh ? This script will give us more detailed information on what sound chip it is. We will also need to know the brand of board, for the driver file.

Thanks,

Tobin

Quoted 23 lines · Peter Matthias

Hello,

I have got a 690G board with following lspic -nv output:

01:05.2 0403: 1002:7919
Subsystem: 1002:7919
Flags: bus master, fast devsel, latency 64, IRQ 19 Memory at fe9e8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-

With the default setting, microphone does not work. With module parameter "modprobe -i snd-hda-intel model=6stack-dig" microphone works well. Please add to default setting. It was written in Linux Kernel documentation to report this issue here.

Thank you,
Peter
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Signature · 1 line
Tobin Davis <[email protected]>