Skip to contentSkip to conversation

x86 setup code rewrite in C - revised

PATCH In review H. Peter Anvin 7 participants 42 messages Jul 11, 2007 – Jul 16, 2007 2 messages not in the archive Documentation

lore
Share & tools
lore
#0 lore raw

This patch set replaces the x86 setup code, which is currently all in assembly, with a version written in C, using the ".code16gcc" feature of binutils (which has been present since at least 2001.)

The new code is vastly easier to read, and, I hope, debug. It should be noted that I found a fair number of minor bugs while going through this code, and have attempted to correct them.

In the process of doing so, it introduces several cleanups, in particular:

- Obsoletes the hd_info field in the boot_params structure; they are only ever used for ST-506 (pre-IDE) drives and are pretty much guaranteed to be wrong on current BIOSes;
- Unifies the CPU feature bits between i386 and x86-64. In the future, it should be possible to use arch/i386/boot/cpucheck.c to do the post-invocation CPU check currently done in arch/x86_64/kernel/trampoline.S, although this patch set doesn't introduce that change.
- boot_params is now a proper structure.

This patchset incorporates all feedback received by 2007-07-11 12:00 PDT.

 arch/i386/boot/bootsect.S                     |   98 -
 arch/i386/boot/edd.S                          |  231 --
 arch/i386/boot/setup.S                        | 1075 -------------
 arch/i386/boot/video.S                        | 2043 --------------------------
 arch/i386/kernel/verify_cpu.S                 |   94 -
 arch/x86_64/boot/bootsect.S                   |   98 -
 arch/x86_64/boot/install.sh                   |    2 
 arch/x86_64/boot/mtools.conf.in               |   17 
 arch/x86_64/boot/setup.S                      |  826 ----------
 arch/x86_64/boot/tools/build.c                |  185 --
 b/Documentation/i386/zero-page.txt            |    1 
 b/MAINTAINERS                                 |    4 
 b/arch/i386/Kconfig.cpu                       |    6 
 b/arch/i386/boot/Makefile                     |   48 
 b/arch/i386/boot/a20.c                        |  161 ++
 b/arch/i386/boot/apm.c                        |   97 +
 b/arch/i386/boot/bitops.h                     |   45 
 b/arch/i386/boot/boot.h                       |  296 +++
 b/arch/i386/boot/cmdline.c                    |   97 +
 b/arch/i386/boot/code16gcc.h                  |   15 
 b/arch/i386/boot/compressed/Makefile          |    7 
 b/arch/i386/boot/compressed/head.S            |    6 
 b/arch/i386/boot/copy.S                       |  101 +
 b/arch/i386/boot/cpu.c                        |   69 
 b/arch/i386/boot/cpucheck.c                   |  267 +++
 b/arch/i386/boot/edd.c                        |  196 ++
 b/arch/i386/boot/header.S                     |  283 +++
 b/arch/i386/boot/main.c                       |  161 ++
 b/arch/i386/boot/mca.c                        |   43 
 b/arch/i386/boot/memory.c                     |   99 +
 b/arch/i386/boot/pm.c                         |  170 ++
 b/arch/i386/boot/pmjump.S                     |   54 
 b/arch/i386/boot/printf.c                     |  307 +++
 b/arch/i386/boot/setup.ld                     |   54 
 b/arch/i386/boot/string.c                     |   52 
 b/arch/i386/boot/tools/build.c                |  160 --
 b/arch/i386/boot/tty.c                        |  112 +
 b/arch/i386/boot/version.c                    |   23 
 b/arch/i386/boot/vesa.h                       |   79 +
 b/arch/i386/boot/video-bios.c                 |  125 +
 b/arch/i386/boot/video-vesa.c                 |  284 +++
 b/arch/i386/boot/video-vga.c                  |  260 +++
 b/arch/i386/boot/video.c                      |  456 +++++
 b/arch/i386/boot/video.h                      |  145 +
 b/arch/i386/boot/voyager.c                    |   46 
 b/arch/i386/kernel/cpu/Makefile               |    2 
 b/arch/i386/kernel/cpu/addon_cpuid_features.c |   50 
 b/arch/i386/kernel/cpu/common.c               |    2 
 b/arch/i386/kernel/cpu/proc.c                 |   21 
 b/arch/i386/kernel/e820.c                     |    2 
 b/arch/i386/kernel/setup.c                    |   12 
 b/arch/x86_64/Kconfig                         |    4 
 b/arch/x86_64/boot/Makefile                   |  136 -
 b/arch/x86_64/boot/compressed/Makefile        |    9 
 b/arch/x86_64/boot/compressed/head.S          |    6 
 b/arch/x86_64/kernel/Makefile                 |    2 
 b/arch/x86_64/kernel/setup.c                  |   21 
 b/arch/x86_64/kernel/verify_cpu.S             |   22 
 b/drivers/ide/legacy/hd.c                     |   73 
 b/include/asm-i386/boot.h                     |    6 
 b/include/asm-i386/bootparam.h                |   85 +
 b/include/asm-i386/cpufeature.h               |   26 
 b/include/asm-i386/e820.h                     |   14 
 b/include/asm-i386/processor.h                |    1 
 b/include/asm-i386/required-features.h        |   39 
 b/include/asm-i386/setup.h                    |   10 
 b/include/asm-x86_64/alternative.h            |   68 
 b/include/asm-x86_64/boot.h                   |   16 
 b/include/asm-x86_64/bootparam.h              |    1 
 b/include/asm-x86_64/cpufeature.h             |  115 -
 b/include/asm-x86_64/e820.h                   |    4 
 b/include/asm-x86_64/processor.h              |    3 
 b/include/asm-x86_64/required-features.h      |   46 
 b/include/asm-x86_64/segment.h                |    8 
 b/include/linux/edd.h                         |    4 
 b/include/linux/screen_info.h                 |    9 
 76 files changed, 4606 insertions(+), 5209 deletions(-)
#1 lore raw

PATCH 1/33 x86 setup: MAINTAINERS: formally take responsibility for the i386 boot code

From: H. Peter Anvin <[email protected]>

Change MAINTAINERS to formally take responsibility for the i386 boot code.

---
 MAINTAINERS |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
MAINTAINERS +2 -2
index df40a4e..7f92ce2 100644
@@ -1750,8 +1750,8 @@ T:	http://www.harbaum.org/till/i2c_tiny_usb
 S:	Maintained
 
 i386 BOOT CODE
-P:	Riley H. Williams
-M:	[email protected]
+P:	H. Peter Anvin
+M:	[email protected]
 L:	[email protected]
 S:	Maintained
 
Signature · 1 line
1.5.2.2
#2 lore raw

PATCH 2/33 hd.c: remove BIOS/CMOS queries

From: H. Peter Anvin <[email protected]>

An ST-506 disk these days is pretty much someone trying to pull ancient data using an auxilliary controller. Pulling data from the BIOS or CMOS is just plain wrong, since it's likely to be the primary OS disk... and would be user-entered data anyway. Instead, require the user enters it on the command line.

---
 drivers/ide/legacy/hd.c |   73 ++++++++---------------------------------------
 1 files changed, 12 insertions(+), 61 deletions(-)
drivers/ide/legacy/hd.c +12 -61
index 45ed035..9d7d8aa 100644
@@ -718,74 +718,25 @@ static int __init hd_init(void)
 	device_timer.function = hd_times_out;
 	blk_queue_hardsect_size(hd_queue, 512);
 
-#ifdef __i386__
 	if (!NR_HD) {
-		extern struct drive_info drive_info;
-		unsigned char *BIOS = (unsigned char *) &drive_info;
-		unsigned long flags;
-		int cmos_disks;
-
-		for (drive=0 ; drive<2 ; drive++) {
-			hd_info[drive].cyl = *(unsigned short *) BIOS;
-			hd_info[drive].head = *(2+BIOS);
-			hd_info[drive].wpcom = *(unsigned short *) (5+BIOS);
-			hd_info[drive].ctl = *(8+BIOS);
-			hd_info[drive].lzone = *(unsigned short *) (12+BIOS);
-			hd_info[drive].sect = *(14+BIOS);
-#ifdef does_not_work_for_everybody_with_scsi_but_helps_ibm_vp
-			if (hd_info[drive].cyl && NR_HD == drive)
-				NR_HD++;
-#endif
-			BIOS += 16;
-		}
-
-	/*
-		We query CMOS about hard disks : it could be that 
-		we have a SCSI/ESDI/etc controller that is BIOS
-		compatible with ST-506, and thus showing up in our
-		BIOS table, but not register compatible, and therefore
-		not present in CMOS.
-
-		Furthermore, we will assume that our ST-506 drives
-		<if any> are the primary drives in the system, and 
-		the ones reflected as drive 1 or 2.
-
-		The first drive is stored in the high nibble of CMOS
-		byte 0x12, the second in the low nibble.  This will be
-		either a 4 bit drive type or 0xf indicating use byte 0x19 
-		for an 8 bit type, drive 1, 0x1a for drive 2 in CMOS.
-
-		Needless to say, a non-zero value means we have 
-		an AT controller hard disk for that drive.
-
-		Currently the rtc_lock is a bit academic since this
-		driver is non-modular, but someday... ?         Paul G.
-	*/
-
-		spin_lock_irqsave(&rtc_lock, flags);
-		cmos_disks = CMOS_READ(0x12);
-		spin_unlock_irqrestore(&rtc_lock, flags);
-
-		if (cmos_disks & 0xf0) {
-			if (cmos_disks & 0x0f)
-				NR_HD = 2;
-			else
-				NR_HD = 1;
-		}
-	}
-#endif /* __i386__ */
-#ifdef __arm__
-	if (!NR_HD) {
-		/* We don't know anything about the drive.  This means
+		/*
+		 * We don't know anything about the drive.  This means
 		 * that you *MUST* specify the drive parameters to the
 		 * kernel yourself.
+		 *
+		 * If we were on an i386, we used to read this info from
+		 * the BIOS or CMOS.  This doesn't work all that well,
+		 * since this assumes that this is a primary or secondary
+		 * drive, and if we're using this legacy driver, it's
+		 * probably an auxilliary controller added to recover
+		 * legacy data off an ST-506 drive.  Either way, it's
+		 * definitely safest to have the user explicitly specify
+		 * the information.
 		 */
 		printk("hd: no drives specified - use hd=cyl,head,sectors"
 			" on kernel command line\n");
-	}
-#endif
-	if (!NR_HD)
 		goto out;
+	}
 
 	for (drive=0 ; drive < NR_HD ; drive++) {
 		struct gendisk *disk = alloc_disk(64);
Signature · 1 line
1.5.2.2
#3 lore raw

PATCH 3/33 include/asm-i386/boot.h: This is <asm/boot.h>, not <linux/boot.h>

From: H. Peter Anvin <[email protected]>

include/asm-i386/boot.h incorrectly has the multiple include guards as _LINUX_BOOT_H instead of _ASM_BOOT_H. Fix.

---
 include/asm-i386/boot.h |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
include/asm-i386/boot.h +3 -3
index bd024ab..ed8affb 100644
@@ -1,5 +1,5 @@
-#ifndef _LINUX_BOOT_H
-#define _LINUX_BOOT_H
+#ifndef _ASM_BOOT_H
+#define _ASM_BOOT_H
 
 /* Don't touch these, unless you really know what you're doing. */
 #define DEF_INITSEG	0x9000
@@ -17,4 +17,4 @@
 				+ (CONFIG_PHYSICAL_ALIGN - 1)) \
 				& ~(CONFIG_PHYSICAL_ALIGN - 1))
 
-#endif /* _LINUX_BOOT_H */
+#endif /* _ASM_BOOT_H */
Signature · 1 line
1.5.2.2
#4 lore raw

PATCH 4/33 Unify the CPU features vectors between i386 and x86-64

From: H. Peter Anvin <[email protected]>

Unify the handling of the CPU features vectors between i386 and x86-64. This also adopts the collapsing of features which are required at compile-time into constant tests from x86-64 to i386.

---
 arch/i386/kernel/cpu/proc.c            |   15 +++--
 arch/i386/kernel/verify_cpu.S          |   12 ++--
 arch/x86_64/kernel/setup.c             |   13 ++--
 arch/x86_64/kernel/verify_cpu.S        |   22 +-----
 include/asm-i386/cpufeature.h          |   17 +++--
 include/asm-i386/required-features.h   |   38 ++++++++---
 include/asm-x86_64/alternative.h       |   68 ++++++++++---------
 include/asm-x86_64/cpufeature.h        |  115 +++----------------------------
 include/asm-x86_64/processor.h         |    2 -
 include/asm-x86_64/required-features.h |   45 ++++++++++++
 10 files changed, 159 insertions(+), 188 deletions(-)
 create mode 100644 include/asm-x86_64/required-features.h
arch/i386/kernel/cpu/proc.c +9 -6
index 89d91e6..ed73091 100644
@@ -29,7 +29,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
-		NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", "3dnowext", "3dnow",
+		NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm",
+		"3dnowext", "3dnow",
 
 		/* Transmeta-defined */
 		"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
@@ -40,8 +41,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		/* Other (Linux-defined) */
 		"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
 		NULL, NULL, NULL, NULL,
-		"constant_tsc", "up", NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		"constant_tsc", "up", NULL, "arch_perfmon",
+		"pebs", "bts", NULL, "sync_rdtsc",
+		"rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 		/* Intel-defined (#2) */
@@ -57,9 +59,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 		/* AMD-defined (#2) */
-		"lahf_lm", "cmp_legacy", "svm", "extapic", "cr8legacy", "abm",
-		"sse4a", "misalignsse",
-		"3dnowprefetch", "osvw", "ibs", NULL, NULL, NULL, NULL, NULL,
+		"lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy",
+		"altmovcr8", "abm", "sse4a",
+		"misalignsse", "3dnowprefetch",
+		"osvw", "ibs", NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 	};
arch/i386/kernel/verify_cpu.S +6 -6
index f1d1eac..3efc5c1 100644
@@ -20,7 +20,7 @@ verify_cpu:
 	testl	$(1<<18),%eax
 	jz	bad
 #endif
-#if REQUIRED_MASK1 != 0
+#if REQUIRED_MASK0 != 0
 	pushfl				# standard way to check for cpuid
 	popl	%eax
 	movl	%eax,%ebx
@@ -39,14 +39,14 @@ verify_cpu:
 	pushfl
 	popl	%eax
 	cmpl	%eax,%ebx
-	jz	bad			# REQUIRED_MASK1 != 0 requires CPUID
+	jz	bad			# REQUIRED_MASK0 != 0 requires CPUID
 
 	movl	$0x0,%eax		# See if cpuid 1 is implemented
 	cpuid
 	cmpl	$0x1,%eax
 	jb	bad			# no cpuid 1
 
-#if REQUIRED_MASK1 & NEED_CMPXCHG64
+#if REQUIRED_MASK0 & NEED_CMPXCHG64
 	/* Some VIA C3s need magic MSRs to enable CX64. Do this here */
 	cmpl	$0x746e6543,%ebx	# Cent
 	jne	1f
@@ -79,10 +79,10 @@ verify_cpu:
 #error	add proper model checking here
 #endif
 
-	andl	$REQUIRED_MASK1,%edx
-	xorl	$REQUIRED_MASK1,%edx
+	andl	$REQUIRED_MASK0,%edx
+	xorl	$REQUIRED_MASK0,%edx
 	jnz	bad
-#endif /* REQUIRED_MASK1 */
+#endif /* REQUIRED_MASK0 */
 
 	popfl
 	xor	%eax,%eax
arch/x86_64/kernel/setup.c +7 -6
index eb6524f..dc7630d 100644
@@ -931,7 +931,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	        "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
 	        "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
 	        "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
-	        "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", NULL,
+	        "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
 
 		/* AMD-defined */
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
@@ -947,10 +947,11 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 		/* Other (Linux-defined) */
-		"cxmmx", NULL, "cyrix_arr", "centaur_mcr", NULL,
-		"constant_tsc", NULL, NULL,
-		"up", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
+		NULL, NULL, NULL, NULL,
+		"constant_tsc", "up", NULL, "arch_perfmon",
+		"pebs", "bts", NULL, "sync_rdtsc",
+		"rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 		/* Intel-defined (#2) */
@@ -961,7 +962,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 		/* VIA/Cyrix/Centaur-defined */
 		NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
-		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		"ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
arch/x86_64/kernel/verify_cpu.S +4 -18
index e035f59..45b6f8a 100644
@@ -37,20 +37,6 @@ verify_cpu:
 	pushl	$0			# Kill any dangerous flags
 	popfl
 
-	/* minimum CPUID flags for x86-64 as defined by AMD */
-#define M(x) (1<<(x))
-#define M2(a,b) M(a)|M(b)
-#define M4(a,b,c,d) M(a)|M(b)|M(c)|M(d)
-
-#define SSE_MASK \
-	(M2(X86_FEATURE_XMM,X86_FEATURE_XMM2))
-#define REQUIRED_MASK1 \
-	(M4(X86_FEATURE_FPU,X86_FEATURE_PSE,X86_FEATURE_TSC,X86_FEATURE_MSR)|\
-	 M4(X86_FEATURE_PAE,X86_FEATURE_CX8,X86_FEATURE_PGE,X86_FEATURE_CMOV)|\
-	 M(X86_FEATURE_FXSR))
-#define REQUIRED_MASK2 \
-	(M(X86_FEATURE_LM - 32))
-
 	pushfl				# standard way to check for cpuid
 	popl	%eax
 	movl	%eax,%ebx
@@ -79,8 +65,8 @@ verify_cpu:
 verify_cpu_noamd:
 	movl    $0x1,%eax		# Does the cpu have what it takes
 	cpuid
-	andl	$REQUIRED_MASK1,%edx
-	xorl	$REQUIRED_MASK1,%edx
+	andl	$REQUIRED_MASK0,%edx
+	xorl	$REQUIRED_MASK0,%edx
 	jnz	verify_cpu_no_longmode
 
 	movl    $0x80000000,%eax	# See if extended cpuid is implemented
@@ -90,8 +76,8 @@ verify_cpu_noamd:
 
 	movl    $0x80000001,%eax	# Does the cpu have what it takes
 	cpuid
-	andl    $REQUIRED_MASK2,%edx
-	xorl    $REQUIRED_MASK2,%edx
+	andl    $REQUIRED_MASK1,%edx
+	xorl    $REQUIRED_MASK1,%edx
 	jnz     verify_cpu_no_longmode
 
 verify_cpu_sse_test:
include/asm-i386/cpufeature.h +12 -5
index f514e90..7ea5f4a 100644
@@ -81,6 +81,7 @@
 #define X86_FEATURE_BTS		(3*32+13)  /* Branch Trace Store */
 #define X86_FEATURE_LAPIC_TIMER_BROKEN (3*32+ 14) /* lapic timer broken in C1 */
 #define X86_FEATURE_SYNC_RDTSC	(3*32+15)  /* RDTSC synchronizes the CPU */
+#define X86_FEATURE_REP_GOOD   (3*32+16) /* rep microcode works well on this CPU */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* Streaming SIMD Extensions-3 */
@@ -108,11 +109,17 @@
 #define X86_FEATURE_LAHF_LM	(6*32+ 0) /* LAHF/SAHF in long mode */
 #define X86_FEATURE_CMP_LEGACY	(6*32+ 1) /* If yes HyperThreading not valid */
 
-#define cpu_has(c, bit)					\
-	((__builtin_constant_p(bit) && (bit) < 32 && 	\
-		(1UL << (bit)) & REQUIRED_MASK1) ?	\
-		1 : 					\
-	test_bit(bit, (c)->x86_capability))
+#define cpu_has(c, bit)							\
+	(__builtin_constant_p(bit) &&					\
+	 ( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) ||	\
+	   (((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) ||	\
+	   (((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) ||	\
+	   (((bit)>>5)==3 && (1UL<<((bit)&31) & REQUIRED_MASK3)) ||	\
+	   (((bit)>>5)==4 && (1UL<<((bit)&31) & REQUIRED_MASK4)) ||	\
+	   (((bit)>>5)==5 && (1UL<<((bit)&31) & REQUIRED_MASK5)) ||	\
+	   (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) )	\
+	  ? 1 :								\
+	  test_bit(bit, (c)->x86_capability))
 #define boot_cpu_has(bit)	cpu_has(&boot_cpu_data, bit)
 
 #define cpu_has_fpu		boot_cpu_has(X86_FEATURE_FPU)
include/asm-i386/required-features.h +29 -9
index 9db866c..a9c3b11 100644
@@ -3,32 +3,52 @@
 
 /* Define minimum CPUID feature set for kernel These bits are checked
    really early to actually display a visible error message before the
-   kernel dies.  Only add word 0 bits here
+   kernel dies.  Make sure to assign features to the proper mask!
 
    Some requirements that are not in CPUID yet are also in the
-   CONFIG_X86_MINIMUM_CPU mode which is checked too.
+   CONFIG_X86_MINIMUM_CPU_FAMILY which is checked too.
 
    The real information is in arch/i386/Kconfig.cpu, this just converts
    the CONFIGs into a bitmask */
 
+#ifndef CONFIG_MATH_EMULATION
+# define NEED_FPU	(1<<(X86_FEATURE_FPU & 31))
+#else
+# define NEED_FPU	0
+#endif
+
 #ifdef CONFIG_X86_PAE
-#define NEED_PAE	(1<<X86_FEATURE_PAE)
+# define NEED_PAE	(1<<(X86_FEATURE_PAE & 31))
 #else
-#define NEED_PAE	0
+# define NEED_PAE	0
 #endif
 
 #ifdef CONFIG_X86_CMOV
-#define NEED_CMOV	(1<<X86_FEATURE_CMOV)
+# define NEED_CMOV	(1<<(X86_FEATURE_CMOV & 31))
 #else
-#define NEED_CMOV	0
+# define NEED_CMOV	0
 #endif
 
 #ifdef CONFIG_X86_CMPXCHG64
-#define NEED_CMPXCHG64  (1<<X86_FEATURE_CX8)
+# define NEED_CX8	(1<<(X86_FEATURE_CX8 & 31))
+#else
+# define NEED_CX8	0
+#endif
+
+#define REQUIRED_MASK0	(NEED_FPU|NEED_PAE|NEED_CMOV|NEED_CX8)
+
+#ifdef CONFIG_X86_USE_3DNOW
+# define NEED_3DNOW	(1<<(X86_FEATURE_3DNOW & 31))
 #else
-#define NEED_CMPXCHG64  0
+# define NEED_3DNOW	0
 #endif
 
-#define REQUIRED_MASK1	(NEED_PAE|NEED_CMOV|NEED_CMPXCHG64)
+#define REQUIRED_MASK1	(NEED_3DNOW)
+
+#define REQUIRED_MASK2	0
+#define REQUIRED_MASK3	0
+#define REQUIRED_MASK4	0
+#define REQUIRED_MASK5	0
+#define REQUIRED_MASK6	0
 
 #endif
include/asm-x86_64/alternative.h +35 -33

80 lines not on this page · raw message

include/asm-x86_64/cpufeature.h +12 -103

127 lines not on this page · raw message

include/asm-x86_64/processor.h +0 -2
index 461ffe4..df64572 100644
@@ -368,8 +368,6 @@ static inline void sync_core(void)
 	asm volatile("cpuid" : "=a" (tmp) : "0" (1) : "ebx","ecx","edx","memory");
 } 
 
-#define cpu_has_fpu 1
-
 #define ARCH_HAS_PREFETCH
 static inline void prefetch(void *x) 
 { 
include/asm-x86_64/required-features.h new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#5 lore raw

PATCH 5/33 Change CONFIG_X86_MINIMUM_CPU_MODEL to CONFIG_X86_MINIMUM_CPU_FAMILY

From: H. Peter Anvin <[email protected]>

CONFIG_X86_MINIMUM_CPU_MODEL, so change it to CONFIG_X86_MINIMUM_CPU_FAMILY. Also, the default minimum should be 3, not 0.

---
 arch/i386/Kconfig.cpu         |    6 +++---
 arch/i386/kernel/verify_cpu.S |    4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)
arch/i386/Kconfig.cpu +3 -3
index 5c95ceb..9cbe76c 100644
@@ -344,8 +344,8 @@ config X86_CMOV
 	depends on (MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7)
 	default y
 
-config X86_MINIMUM_CPU_MODEL
+config X86_MINIMUM_CPU_FAMILY
 	int
-	default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP
-	default "0"
+	default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK
+	default "3"
 
arch/i386/kernel/verify_cpu.S +2 -2
index 3efc5c1..fff4aa6 100644
@@ -9,7 +9,7 @@ verify_cpu:
 	pushl	$0			# Kill any dangerous flags
 	popfl
 
-#if CONFIG_X86_MINIMUM_CPU_MODEL >= 4
+#if CONFIG_X86_MINIMUM_CPU_FAMILY >= 4
 	pushfl
 	pop	%eax
 	orl	$(1<<18),%eax		# try setting AC
@@ -75,7 +75,7 @@ verify_cpu:
 	movl    $0x1,%eax		# Does the cpu have what it takes
 	cpuid
 
-#if CONFIG_X86_MINIMUM_CPU_MODEL > 4
+#if CONFIG_X86_MINIMUM_CPU_FAMILY > 4
 #error	add proper model checking here
 #endif
 
Signature · 1 line
1.5.2.2
#6 lore raw

PATCH 6/33 Clean up struct screen_info (<linux/screen_info.h>)

From: H. Peter Anvin <[email protected]>

struct screen_info has unaligned members, it needs to be packed. In the process, fix the naming of some of the members, which don't belong in this structure but are part of it anyway.

---
 include/linux/screen_info.h |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)
include/linux/screen_info.h +4 -5
index b02308e..3ee412b 100644
@@ -10,7 +10,7 @@
 struct screen_info {
 	u8  orig_x;		/* 0x00 */
 	u8  orig_y;		/* 0x01 */
-	u16 dontuse1;		/* 0x02 -- EXT_MEM_K sits here */
+	u16 ext_mem_k;		/* 0x02 */
 	u16 orig_video_page;	/* 0x04 */
 	u8  orig_video_mode;	/* 0x06 */
 	u8  orig_video_cols;	/* 0x07 */
@@ -27,7 +27,7 @@ struct screen_info {
 	u16 lfb_depth;		/* 0x16 */
 	u32 lfb_base;		/* 0x18 */
 	u32 lfb_size;		/* 0x1c */
-	u16 dontuse2, dontuse3;	/* 0x20 -- CL_MAGIC and CL_OFFSET here */
+	u16 cl_magic, cl_offset; /* 0x20 */
 	u16 lfb_linelength;	/* 0x24 */
 	u8  red_size;		/* 0x26 */
 	u8  red_pos;		/* 0x27 */
@@ -42,9 +42,8 @@ struct screen_info {
 	u16 pages;		/* 0x32 */
 	u16 vesa_attributes;	/* 0x34 */
 	u32 capabilities;       /* 0x36 */
-				/* 0x3a -- 0x3b reserved for future expansion */
-				/* 0x3c -- 0x3f micro stack for relocatable kernels */
-};
+	u8  _reserved[6];	/* 0x3a */
+} __attribute__((packed));
 
 extern struct screen_info screen_info;
 
Signature · 1 line
1.5.2.2
#7 lore raw

PATCH 7/33 Use a new CPU feature word to cover all Intel features that are spread around

From: Venki Pallipadi <[email protected]>

in different CPUID leafs like 0x5, 0x6 and 0xA. Make this feature detection code common across i386 and x86_64.

Display Intel Dynamic Acceleration feature in /proc/cpuinfo. This feature will be enabled automatically by current acpi-cpufreq driver.

Refer to Intel Software Developer's Manual for more details about the feature.

Thanks to hpa (H Peter Anvin) for the making the actual code detecting the scattered features data-driven.

---
 arch/i386/kernel/cpu/Makefile               |    2 +-
 arch/i386/kernel/cpu/addon_cpuid_features.c |   50 +++++++++++++++++++++++++++
 arch/i386/kernel/cpu/common.c               |    2 +
 arch/i386/kernel/cpu/proc.c                 |    6 +++
 arch/x86_64/kernel/Makefile                 |    2 +
 arch/x86_64/kernel/setup.c                  |    8 ++++
 include/asm-i386/cpufeature.h               |   11 +++++-
 include/asm-i386/processor.h                |    1 +
 include/asm-i386/required-features.h        |    1 +
 include/asm-x86_64/processor.h              |    1 +
 include/asm-x86_64/required-features.h      |    1 +
 11 files changed, 82 insertions(+), 3 deletions(-)
 create mode 100644 arch/i386/kernel/cpu/addon_cpuid_features.c
arch/i386/kernel/cpu/Makefile +1 -1
index 74f27a4..0b6a855 100644
@@ -8,7 +8,7 @@ obj-y	+=	amd.o
 obj-y	+=	cyrix.o
 obj-y	+=	centaur.o
 obj-y	+=	transmeta.o
-obj-y	+=	intel.o intel_cacheinfo.o
+obj-y	+=	intel.o intel_cacheinfo.o addon_cpuid_features.o
 obj-y	+=	rise.o
 obj-y	+=	nexgen.o
 obj-y	+=	umc.o
arch/i386/kernel/cpu/addon_cpuid_features.c new file +50 -0

50 lines not on this page · raw message

arch/i386/kernel/cpu/common.c +2 -0
index 794d593..e5419a9 100644
@@ -353,6 +353,8 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 * c)
 			if ( xlvl >= 0x80000004 )
 				get_model_name(c); /* Default name */
 		}
+
+		init_scattered_cpuid_features(c);
 	}
 
 	early_intel_workaround(c);
arch/i386/kernel/cpu/proc.c +6 -0
index ed73091..1e31b6c 100644
@@ -65,6 +65,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		"osvw", "ibs", NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+		/* Auxiliary (Linux-defined) */
+		"ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 	};
 	static const char * const x86_power_flags[] = {
 		"ts",	/* temperature sensor */
arch/x86_64/kernel/Makefile +2 -0
index de1de8a..47f1dc3 100644
@@ -44,6 +44,7 @@ obj-$(CONFIG_PCI)		+= early-quirks.o
 
 obj-y				+= topology.o
 obj-y				+= intel_cacheinfo.o
+obj-y				+= addon_cpuid_features.o
 obj-y				+= pcspeaker.o
 
 CFLAGS_vsyscall.o		:= $(PROFILING) -g0
@@ -55,6 +56,7 @@ cpuid-$(subst m,y,$(CONFIG_X86_CPUID))  += ../../i386/kernel/cpuid.o
 topology-y                     += ../../i386/kernel/topology.o
 microcode-$(subst m,y,$(CONFIG_MICROCODE))  += ../../i386/kernel/microcode.o
 intel_cacheinfo-y		+= ../../i386/kernel/cpu/intel_cacheinfo.o
+addon_cpuid_features-y		+= ../../i386/kernel/cpu/addon_cpuid_features.o
 quirks-y			+= ../../i386/kernel/quirks.o
 i8237-y				+= ../../i386/kernel/i8237.o
 msr-$(subst m,y,$(CONFIG_X86_MSR))  += ../../i386/kernel/msr.o
arch/x86_64/kernel/setup.c +8 -0
index dc7630d..33ef718 100644
@@ -846,6 +846,8 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 			c->x86_capability[2] = cpuid_edx(0x80860001);
 	}
 
+	init_scattered_cpuid_features(c);
+
 	c->apicid = phys_pkg_id(0);
 
 	/*
@@ -973,6 +975,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		"osvw", "ibs", NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+		/* Auxiliary (Linux-defined) */
+		"ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 	};
 	static char *x86_power_flags[] = { 
 		"ts",	/* temperature sensor */
include/asm-i386/cpufeature.h +9 -2
index 7ea5f4a..c961c03 100644
@@ -12,7 +12,7 @@
 #endif
 #include <asm/required-features.h>
 
-#define NCAPINTS	7	/* N 32-bit words worth of info */
+#define NCAPINTS	8	/* N 32-bit words worth of info */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
 #define X86_FEATURE_FPU		(0*32+ 0) /* Onboard FPU */
@@ -109,6 +109,12 @@
 #define X86_FEATURE_LAHF_LM	(6*32+ 0) /* LAHF/SAHF in long mode */
 #define X86_FEATURE_CMP_LEGACY	(6*32+ 1) /* If yes HyperThreading not valid */
 
+/*
+ * Auxiliary flags: Linux defined - For features scattered in various
+ * CPUID levels like 0x6, 0xA etc
+ */
+#define X86_FEATURE_IDA		(7*32+ 0) /* Intel Dynamic Acceleration */
+
 #define cpu_has(c, bit)							\
 	(__builtin_constant_p(bit) &&					\
 	 ( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) ||	\
@@ -117,7 +123,8 @@
 	   (((bit)>>5)==3 && (1UL<<((bit)&31) & REQUIRED_MASK3)) ||	\
 	   (((bit)>>5)==4 && (1UL<<((bit)&31) & REQUIRED_MASK4)) ||	\
 	   (((bit)>>5)==5 && (1UL<<((bit)&31) & REQUIRED_MASK5)) ||	\
-	   (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) )	\
+	   (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) ||	\
+	   (((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) )	\
 	  ? 1 :								\
 	  test_bit(bit, (c)->x86_capability))
 #define boot_cpu_has(bit)	cpu_has(&boot_cpu_data, bit)
include/asm-i386/processor.h +1 -0
index 338668b..94e0c14 100644
@@ -119,6 +119,7 @@ void __init cpu_detect(struct cpuinfo_x86 *c);
 extern void identify_boot_cpu(void);
 extern void identify_secondary_cpu(struct cpuinfo_x86 *);
 extern void print_cpu_info(struct cpuinfo_x86 *);
+extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
 extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
 extern unsigned short num_cache_leaves;
 
include/asm-i386/required-features.h +1 -0
index a9c3b11..65848a0 100644
@@ -50,5 +50,6 @@
 #define REQUIRED_MASK4	0
 #define REQUIRED_MASK5	0
 #define REQUIRED_MASK6	0
+#define REQUIRED_MASK7	0
 
 #endif
include/asm-x86_64/processor.h +1 -0
index df64572..efc87a5 100644
@@ -100,6 +100,7 @@ extern char ignore_irq13;
 
 extern void identify_cpu(struct cpuinfo_x86 *);
 extern void print_cpu_info(struct cpuinfo_x86 *);
+extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
 extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
 extern unsigned short num_cache_leaves;
 
include/asm-x86_64/required-features.h +1 -0
index 262f315..e80d576 100644
@@ -41,5 +41,6 @@
 #define REQUIRED_MASK4	0
 #define REQUIRED_MASK5	0
 #define REQUIRED_MASK6	0
+#define REQUIRED_MASK7	0
 
 #endif
Signature · 1 line
1.5.2.2
#8 lore raw

PATCH 8/33 Define zero-page offset 0x1e4 as a scratch field, and use it

From: H. Peter Anvin <[email protected]>

The relocatable kernel code needs a scratch field for the decompressor to determine its own location. It was using a location inside struct screen_info; reserve a free location and document it as scratch instead.

---
 Documentation/i386/zero-page.txt   |    1 +
 arch/i386/boot/compressed/head.S   |    6 +++---
 arch/x86_64/boot/compressed/head.S |    6 +++---
 3 files changed, 7 insertions(+), 6 deletions(-)
Documentation/i386/zero-page.txt +1 -0
index c04a421..75b3680 100644
@@ -37,6 +37,7 @@ Offset	Type		Description
 0x1d0	unsigned long	EFI memory descriptor map pointer
 0x1d4	unsigned long	EFI memory descriptor map size
 0x1e0	unsigned long	ALT_MEM_K, alternative mem check, in Kb
+0x1e4	unsigned long	Scratch field for the kernel setup code
 0x1e8	char		number of entries in E820MAP (below)
 0x1e9	unsigned char	number of entries in EDDBUF (below)
 0x1ea	unsigned char	number of entries in EDD_MBR_SIG_BUFFER (below)
arch/i386/boot/compressed/head.S +3 -3
index 3517a32..f35ea22 100644
@@ -45,10 +45,10 @@ startup_32:
  * at and where we were actually loaded at.  This can only be done
  * with a short local call on x86.  Nothing  else will tell us what
  * address we are running at.  The reserved chunk of the real-mode
- * data at 0x34-0x3f are used as the stack for this calculation.
- * Only 4 bytes are needed.
+ * data at 0x1e4 (defined as a scratch field) are used as the stack
+ * for this calculation. Only 4 bytes are needed.
  */
-	leal 0x40(%esi), %esp
+	leal (0x1e4+4)(%esi), %esp
 	call 1f
 1:	popl %ebp
 	subl $1b, %ebp
arch/x86_64/boot/compressed/head.S +3 -3
index f9d5692..1312bfa 100644
@@ -46,10 +46,10 @@ startup_32:
  * at and where we were actually loaded at.  This can only be done
  * with a short local call on x86.  Nothing  else will tell us what
  * address we are running at.  The reserved chunk of the real-mode
- * data at 0x34-0x3f are used as the stack for this calculation.
- * Only 4 bytes are needed.
+ * data at 0x1e4 (defined as a scratch field) are used as the stack
+ * for this calculation. Only 4 bytes are needed.
  */
-	leal	0x40(%esi), %esp
+	leal	(0x1e4+4)(%esi), %esp
 	call	1f
 1:	popl	%ebp
 	subl	$1b, %ebp
Signature · 1 line
1.5.2.2
#9 lore raw

PATCH 9/33 Make definitions for struct e820entry and struct e820map consistent

From: H. Peter Anvin <[email protected]>

Make definitions for struct e820entry and struct e820map consistent between i386 and x86-64.

---
 arch/i386/kernel/e820.c   |    2 +-
 include/asm-i386/e820.h   |   14 ++++++++------
 include/asm-x86_64/e820.h |    4 +---
 3 files changed, 10 insertions(+), 10 deletions(-)
arch/i386/kernel/e820.c +1 -1
index 9645bb5..fc822a4 100644
@@ -734,7 +734,7 @@ void __init print_memory_map(char *who)
 		case E820_NVS:
 				printk("(ACPI NVS)\n");
 				break;
-		default:	printk("type %lu\n", e820.map[i].type);
+		default:	printk("type %u\n", e820.map[i].type);
 				break;
 		}
 	}
include/asm-i386/e820.h +8 -6
index 096a2a8..c03290c 100644
@@ -25,13 +25,15 @@
 
 #ifndef __ASSEMBLY__
 
+struct e820entry {
+	u64 addr;	/* start of memory segment */
+	u64 size;	/* size of memory segment */
+	u32 type;	/* type of memory segment */
+} __attribute__((packed));
+
 struct e820map {
-    int nr_map;
-    struct e820entry {
-	unsigned long long addr;	/* start of memory segment */
-	unsigned long long size;	/* size of memory segment */
-	unsigned long type;		/* type of memory segment */
-    } map[E820MAX];
+	u32 nr_map;
+	struct e820entry map[E820MAX];
 };
 
 extern struct e820map e820;
include/asm-x86_64/e820.h +1 -3
index 6216fa3..3486e70 100644
@@ -11,8 +11,6 @@
 #ifndef __E820_HEADER
 #define __E820_HEADER
 
-#include <linux/mmzone.h>
-
 #define E820MAP	0x2d0		/* our map */
 #define E820MAX	128		/* number of entries in E820MAP */
 #define E820NR	0x1e8		/* # entries in E820MAP */
@@ -30,7 +28,7 @@ struct e820entry {
 } __attribute__((packed));
 
 struct e820map {
-    int nr_map;
+	u32 nr_map;
 	struct e820entry map[E820MAX];
 };
 
Signature · 1 line
1.5.2.2
#10 lore raw

PATCH 10/33 Make struct boot_params a real structure, and remove obsolete fields

From: H. Peter Anvin <[email protected]>

Make struct boot_params a real structure, and remove the handling of some obsolete fields, in particular hd*_info, which was only used by the ST-506 driver, and likely to be wrong for that driver on any modern BIOS.

---
 arch/i386/kernel/setup.c       |   12 +-----
 include/asm-i386/bootparam.h   |   85 ++++++++++++++++++++++++++++++++++++++++
 include/asm-i386/setup.h       |   10 +++--
 include/asm-x86_64/boot.h      |   16 +-------
 include/asm-x86_64/bootparam.h |    1 +
 5 files changed, 94 insertions(+), 30 deletions(-)
 create mode 100644 include/asm-i386/bootparam.h
 create mode 100644 include/asm-x86_64/bootparam.h
arch/i386/kernel/setup.c +1 -11
index 698c24f..2d61e65 100644
@@ -102,19 +102,10 @@ static unsigned int highmem_pages = -1;
 /*
  * Setup options
  */
-struct drive_info_struct { char dummy[32]; } drive_info;
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || \
-    defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
-EXPORT_SYMBOL(drive_info);
-#endif
 struct screen_info screen_info;
 EXPORT_SYMBOL(screen_info);
 struct apm_info apm_info;
 EXPORT_SYMBOL(apm_info);
-struct sys_desc_table_struct {
-	unsigned short length;
-	unsigned char table[0];
-};
 struct edid_info edid_info;
 EXPORT_SYMBOL_GPL(edid_info);
 struct ist_info ist_info;
@@ -134,7 +125,7 @@ unsigned long saved_videomode;
 
 static char __initdata command_line[COMMAND_LINE_SIZE];
 
-unsigned char __initdata boot_params[PARAM_SIZE];
+struct boot_params __initdata boot_params;
 
 #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
 struct edd edd;
@@ -528,7 +519,6 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
  	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
- 	drive_info = DRIVE_INFO;
  	screen_info = SCREEN_INFO;
 	edid_info = EDID_INFO;
 	apm_info.bios = APM_BIOS_INFO;
include/asm-i386/bootparam.h new file +85 -0

85 lines not on this page · raw message

include/asm-i386/setup.h +6 -4
index 0e8077c..0d5bff9 100644
@@ -26,12 +26,15 @@
 #define NEW_CL_POINTER		0x228	/* Relative to real mode data */
 
 #ifndef __ASSEMBLY__
+
+#include <asm/bootparam.h>
+
 /*
  * This is set up by the setup-routine at boot-time
  */
-extern unsigned char boot_params[PARAM_SIZE];
+extern struct boot_params boot_params;
 
-#define PARAM	(boot_params)
+#define PARAM	((char *)&boot_params)
 #define SCREEN_INFO (*(struct screen_info *) (PARAM+0))
 #define EXT_MEM_K (*(unsigned short *) (PARAM+2))
 #define ALT_MEM_K (*(unsigned long *) (PARAM+0x1e0))
@@ -39,8 +42,7 @@ extern unsigned char boot_params[PARAM_SIZE];
 #define E820_MAP    ((struct e820entry *) (PARAM+E820MAP))
 #define APM_BIOS_INFO (*(struct apm_bios_info *) (PARAM+0x40))
 #define IST_INFO   (*(struct ist_info *) (PARAM+0x60))
-#define DRIVE_INFO (*(struct drive_info_struct *) (PARAM+0x80))
-#define SYS_DESC_TABLE (*(struct sys_desc_table_struct*)(PARAM+0xa0))
+#define SYS_DESC_TABLE (*(struct sys_desc_table *)(PARAM+0xa0))
 #define EFI_SYSTAB ((efi_system_table_t *) *((unsigned long *)(PARAM+0x1c4)))
 #define EFI_MEMDESC_SIZE (*((unsigned long *) (PARAM+0x1c8)))
 #define EFI_MEMDESC_VERSION (*((unsigned long *) (PARAM+0x1cc)))
include/asm-x86_64/boot.h +1 -15
index 96b228e..3c46cea 100644
@@ -1,15 +1 @@
-#ifndef _LINUX_BOOT_H
-#define _LINUX_BOOT_H
-
-/* Don't touch these, unless you really know what you're doing. */
-#define DEF_INITSEG	0x9000
-#define DEF_SYSSEG	0x1000
-#define DEF_SETUPSEG	0x9020
-#define DEF_SYSSIZE	0x7F00
-
-/* Internal svga startup constants */
-#define NORMAL_VGA	0xffff		/* 80x25 mode */
-#define EXTENDED_VGA	0xfffe		/* 80x50 mode */
-#define ASK_VGA		0xfffd		/* ask for it at bootup */
-
-#endif
+#include <asm-i386/boot.h>
include/asm-x86_64/bootparam.h new file +1 -0
new file mode 100644
index 0000000..aa82e52
@@ -0,0 +1 @@
+#include <asm-i386/bootparam.h>
Signature · 1 line
1.5.2.2
#11 lore raw

PATCH 11/33 x86-64: add CONFIG_PHYSICAL_ALIGN for consistency with i386

From: H. Peter Anvin <[email protected]>

Add CONFIG_PHYSICAL_ALIGN (currently as a hardcoded constant) to provide consistency with i386. This value is manifest in the bzImage header.

---
 arch/x86_64/Kconfig |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
arch/x86_64/Kconfig +4 -0
index 5ce9443..8bdd25a 100644
@@ -427,6 +427,10 @@ config NR_CPUS
 	  This is purely to save memory - each supported CPU requires
 	  memory in the static kernel configuration.
 
+config PHYSICAL_ALIGN
+	hex
+	default "0x200000"
+
 config HOTPLUG_CPU
 	bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
 	depends on SMP && HOTPLUG && EXPERIMENTAL
Signature · 1 line
1.5.2.2
#12 lore raw

PATCH 12/33 x86-64: add symbolic constants for the boot segment selectors

From: H. Peter Anvin <[email protected]>

Add symbolic constants for the segment selectors/GDT slots used by the setup code, for consistency with i386.

---
 include/asm-x86_64/segment.h |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)
include/asm-x86_64/segment.h +8 -0
index adf2bf1..04b8ab2 100644
@@ -3,6 +3,14 @@
 
 #include <asm/cache.h>
 
+/* Simple and small GDT entries for booting only */
+
+#define GDT_ENTRY_BOOT_CS		2
+#define __BOOT_CS	(GDT_ENTRY_BOOT_CS * 8)
+
+#define GDT_ENTRY_BOOT_DS		(GDT_ENTRY_BOOT_CS + 1)
+#define __BOOT_DS	(GDT_ENTRY_BOOT_DS * 8)
+
 #define __KERNEL_CS	0x10
 #define __KERNEL_DS	0x18
 
Signature · 1 line
1.5.2.2
#13 lore raw

PATCH 13/33 Header file to produce 16-bit code with gcc

From: H. Peter Anvin <[email protected]>

gcc for i386 can be used with the assembly prefix ".code16gcc" to generate 16-bit (real-mode) code. This header file provides the assembly prefix.

---
 arch/i386/boot/code16gcc.h |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/code16gcc.h
arch/i386/boot/code16gcc.h new file +15 -0
new file mode 100644
index 0000000..3bd8480
@@ -0,0 +1,15 @@
+/*
+ * code16gcc.h
+ *
+ * This file is -include'd when compiling 16-bit C code.
+ * Note: this asm() needs to be emitted before gcc omits any code.
+ * Depending on gcc version, this requires -fno-unit-at-a-time or
+ * -fno-toplevel-reorder.
+ *
+ * Hopefully gcc will eventually have a real -m16 option so we can
+ * drop this hack long term.
+ */
+
+#ifndef __ASSEMBLY__
+asm(".code16gcc");
+#endif
Signature · 1 line
1.5.2.2
#14 lore raw

PATCH 14/33 Top header file for new x86 setup code

From: H. Peter Anvin <[email protected]>

Top header file for the new x86 setup code.

---
 arch/i386/boot/boot.h |  296 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 296 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/boot.h
arch/i386/boot/boot.h new file +296 -0
new file mode 100644
index 0000000..0329c4f
@@ -0,0 +1,296 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/boot.h
+ *
+ * Header file for the real-mode kernel code
+ */
+
+#ifndef BOOT_BOOT_H
+#define BOOT_BOOT_H
+
+#ifndef __ASSEMBLY__
+
+#include <stdarg.h>
+#include <linux/types.h>
+#include <linux/edd.h>
+#include <asm/boot.h>
+#include <asm/bootparam.h>
+
+/* Useful macros */
+#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+
+extern struct setup_header hdr;
+extern struct boot_params boot_params;
+
+/* Basic port I/O */
+static inline void outb(u8 v, u16 port)
+{
+	asm volatile("outb %0,%1" : : "a" (v), "dN" (port));
+}
+static inline u8 inb(u16 port)
+{
+	u8 v;
+	asm volatile("inb %1,%0" : "=a" (v) : "dN" (port));
+	return v;
+}
+
+static inline void outw(u16 v, u16 port)
+{
+	asm volatile("outw %0,%1" : : "a" (v), "dN" (port));
+}
+static inline u16 inw(u16 port)
+{
+	u16 v;
+	asm volatile("inw %1,%0" : "=a" (v) : "dN" (port));
+	return v;
+}
+
+static inline void outl(u32 v, u16 port)
+{
+	asm volatile("outl %0,%1" : : "a" (v), "dn" (port));
+}
+static inline u32 inl(u32 port)
+{
+	u32 v;
+	asm volatile("inl %1,%0" : "=a" (v) : "dN" (port));
+	return v;
+}
+
+static inline void io_delay(void)
+{
+	const u16 DELAY_PORT = 0x80;
+	asm volatile("outb %%al,%0" : : "dN" (DELAY_PORT));
+}
+
+/* These functions are used to reference data in other segments. */
+
+static inline u16 ds(void)
+{
+	u16 seg;
+	asm("movw %%ds,%0" : "=rm" (seg));
+	return seg;
+}
+
+static inline void set_fs(u16 seg)
+{
+	asm volatile("movw %0,%%fs" : : "rm" (seg));
+}
+static inline u16 fs(void)
+{
+	u16 seg;
+	asm("movw %%fs,%0" : "=rm" (seg));
+	return seg;
+}
+
+static inline void set_gs(u16 seg)
+{
+	asm volatile("movw %0,%%gs" : : "rm" (seg));
+}
+static inline u16 gs(void)
+{
+	u16 seg;
+	asm("movw %%gs,%0" : "=rm" (seg));
+	return seg;
+}
+
+typedef unsigned int addr_t;
+
+static inline u8 rdfs8(addr_t addr)
+{
+	u8 v;
+	asm("movb %%fs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr));
+	return v;
+}
+static inline u16 rdfs16(addr_t addr)
+{
+	u16 v;
+	asm("movw %%fs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr));
+	return v;
+}
+static inline u32 rdfs32(addr_t addr)
+{
+	u32 v;
+	asm("movl %%fs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr));
+	return v;
+}
+
+static inline void wrfs8(u8 v, addr_t addr)
+{
+	asm volatile("movb %1,%%fs:%0" : "+m" (*(u8 *)addr) : "r" (v));
+}
+static inline void wrfs16(u16 v, addr_t addr)
+{
+	asm volatile("movw %1,%%fs:%0" : "+m" (*(u16 *)addr) : "r" (v));
+}
+static inline void wrfs32(u32 v, addr_t addr)
+{
+	asm volatile("movl %1,%%fs:%0" : "+m" (*(u32 *)addr) : "r" (v));
+}
+
+static inline u8 rdgs8(addr_t addr)
+{
+	u8 v;
+	asm("movb %%gs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr));
+	return v;
+}
+static inline u16 rdgs16(addr_t addr)
+{
+	u16 v;
+	asm("movw %%gs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr));
+	return v;
+}
+static inline u32 rdgs32(addr_t addr)
+{
+	u32 v;
+	asm("movl %%gs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr));
+	return v;
+}
+
+static inline void wrgs8(u8 v, addr_t addr)
+{
+	asm volatile("movb %1,%%gs:%0" : "+m" (*(u8 *)addr) : "r" (v));
+}
+static inline void wrgs16(u16 v, addr_t addr)
+{
+	asm volatile("movw %1,%%gs:%0" : "+m" (*(u16 *)addr) : "r" (v));
+}
+static inline void wrgs32(u32 v, addr_t addr)
+{
+	asm volatile("movl %1,%%gs:%0" : "+m" (*(u32 *)addr) : "r" (v));
+}
+
+/* Note: these only return true/false, not a signed return value! */
+static inline int memcmp(const void *s1, const void *s2, size_t len)
+{
+	u8 diff;
+	asm("repe; cmpsb; setnz %0"
+	    : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
+	return diff;
+}
+
+static inline int memcmp_fs(const void *s1, addr_t s2, size_t len)
+{
+	u8 diff;
+	asm("fs; repe; cmpsb; setnz %0"
+	    : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
+	return diff;
+}
+static inline int memcmp_gs(const void *s1, addr_t s2, size_t len)
+{
+	u8 diff;
+	asm("gs; repe; cmpsb; setnz %0"
+	    : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
+	return diff;
+}
+
+static inline int isdigit(int ch)
+{
+	return (ch >= '0') && (ch <= '9');
+}
+
+/* Heap -- available for dynamic lists. */
+#define STACK_SIZE	512	/* Minimum number of bytes for stack */
+
+extern char _end[];
+extern char *HEAP;
+extern char *heap_end;
+#define RESET_HEAP() ((void *)( HEAP = _end ))
+static inline char *__get_heap(size_t s, size_t a, size_t n)
+{
+	char *tmp;
+
+	HEAP = (char *)(((size_t)HEAP+(a-1)) & ~(a-1));
+	tmp = HEAP;
+	HEAP += s*n;
+	return tmp;
+}
+#define GET_HEAP(type, n) \
+	((type *)__get_heap(sizeof(type),__alignof__(type),(n)))
+
+static inline int heap_free(void)
+{
+	return heap_end-HEAP;
+}
+
+/* copy.S */
+
+void copy_to_fs(addr_t dst, void *src, size_t len);
+void *copy_from_fs(void *dst, addr_t src, size_t len);
+void copy_to_gs(addr_t dst, void *src, size_t len);
+void *copy_from_gs(void *dst, addr_t src, size_t len);
+void *memcpy(void *dst, void *src, size_t len);
+void *memset(void *dst, int c, size_t len);
+
+#define memcpy(d,s,l) __builtin_memcpy(d,s,l)
+#define memset(d,c,l) __builtin_memset(d,c,l)
+
+/* a20.c */
+int enable_a20(void);
+
+/* apm.c */
+int query_apm_bios(void);
+
+/* cmdline.c */
+int cmdline_find_option(const char *option, char *buffer, int bufsize);
+
+/* cpu.c, cpucheck.c */
+int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr);
+int validate_cpu(void);
+
+/* edd.c */
+void query_edd(void);
+
+/* header.S */
+void __attribute__((noreturn)) die(void);
+
+/* mca.c */
+int query_mca(void);
+
+/* memory.c */
+int detect_memory(void);
+
+/* pm.c */
+void __attribute__((noreturn)) go_to_protected_mode(void);
+
+/* pmjump.S */
+void __attribute__((noreturn))
+	protected_mode_jump(u32 entrypoint, u32 bootparams);
+
+/* printf.c */
+int sprintf(char *buf, const char *fmt, ...);
+int vsprintf(char *buf, const char *fmt, va_list args);
+int printf(const char *fmt, ...);
+
+/* string.c */
+int strcmp(const char *str1, const char *str2);
+size_t strnlen(const char *s, size_t maxlen);
+unsigned int atou(const char *s);
+
+/* tty.c */
+void puts(const char *);
+void putchar(int);
+int getchar(void);
+void kbd_flush(void);
+int getchar_timeout(void);
+
+/* video.c */
+void set_video(void);
+
+/* video-vesa.c */
+void vesa_store_edid(void);
+
+/* voyager.c */
+int query_voyager(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* BOOT_BOOT_H */
Signature · 1 line
1.5.2.2
#15 lore raw

PATCH 15/33 Simple bitops for the new x86 setup code.

From: H. Peter Anvin <[email protected]>

A simple collection of bitops for the new x86 setup code.

---
 arch/i386/boot/bitops.h |   45 +++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 45 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/bitops.h
arch/i386/boot/bitops.h new file +45 -0
new file mode 100644
index 0000000..8dcc8dc
@@ -0,0 +1,45 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/bitops.h
+ *
+ * Very simple bitops for the boot code.
+ */
+
+#ifndef BOOT_BITOPS_H
+#define BOOT_BITOPS_H
+#define _LINUX_BITOPS_H		/* Inhibit inclusion of <linux/bitops.h> */
+
+static inline int constant_test_bit(int nr, const void *addr)
+{
+	const u32 *p = (const u32 *)addr;
+	return ((1UL << (nr & 31)) & (p[nr >> 5])) != 0;
+}
+static inline int variable_test_bit(int nr, const void *addr)
+{
+	u8 v;
+	const u32 *p = (const u32 *)addr;
+
+	asm("btl %2,%1; setc %0" : "=qm" (v) : "m" (*p), "Ir" (nr));
+	return v;
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ constant_test_bit((nr),(addr)) : \
+ variable_test_bit((nr),(addr)))
+
+static inline void set_bit(int nr, void *addr)
+{
+	asm("btsl %1,%0" : "+m" (*(u32 *)addr) : "Ir" (nr));
+}
+
+#endif /* BOOT_BITOPS_H */
Signature · 1 line
1.5.2.2
#16 lore raw

PATCH 16/33 String-handling functions for the new x86 setup code.

From: H. Peter Anvin <[email protected]>

strcmp(), memcpy(), memset(), as well as routines to copy to and from other segments (as pointed to by fs and gs).

---
 arch/i386/boot/copy.S   |  101 +++++++++++++++++++++++++++++++++++++++++++++++
 arch/i386/boot/string.c |   52 ++++++++++++++++++++++++
 2 files changed, 153 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/copy.S
 create mode 100644 arch/i386/boot/string.c
arch/i386/boot/copy.S new file +101 -0
new file mode 100644
index 0000000..ef127e5
@@ -0,0 +1,101 @@
+/* ----------------------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/copy.S
+ *
+ * Memory copy routines
+ */
+
+	.code16gcc
+	.text
+
+	.globl	memcpy
+	.type	memcpy, @function
+memcpy:
+	pushw	%si
+	pushw	%di
+	movw	%ax, %di
+	movw	%dx, %si
+	pushw	%cx
+	shrw	$2, %cx
+	rep; movsl
+	popw	%cx
+	andw	$3, %cx
+	rep; movsb
+	popw	%di
+	popw	%si
+	ret
+	.size	memcpy, .-memcpy
+
+	.globl	memset
+	.type	memset, @function
+memset:
+	pushw	%di
+	movw	%ax, %di
+	movzbl	%dl, %eax
+	imull	$0x01010101,%eax
+	pushw	%cx
+	shrw	$2, %cx
+	rep; stosl
+	popw	%cx
+	andw	$3, %cx
+	rep; stosb
+	popw	%di
+	ret
+	.size	memset, .-memset
+
+	.globl	copy_from_fs
+	.type	copy_from_fs, @function
+copy_from_fs:
+	pushw	%ds
+	pushw	%fs
+	popw	%ds
+	call	memcpy
+	popw	%ds
+	ret
+	.size	copy_from_fs, .-copy_from_fs
+
+	.globl	copy_to_fs
+	.type	copy_to_fs, @function
+copy_to_fs:
+	pushw	%es
+	pushw	%fs
+	popw	%es
+	call	memcpy
+	popw	%es
+	ret
+	.size	copy_to_fs, .-copy_to_fs
+
+#if 0 /* Not currently used, but can be enabled as needed */
+
+	.globl	copy_from_gs
+	.type	copy_from_gs, @function
+copy_from_gs:
+	pushw	%ds
+	pushw	%gs
+	popw	%ds
+	call	memcpy
+	popw	%ds
+	ret
+	.size	copy_from_gs, .-copy_from_gs
+	.globl	copy_to_gs
+
+	.type	copy_to_gs, @function
+copy_to_gs:
+	pushw	%es
+	pushw	%gs
+	popw	%es
+	call	memcpy
+	popw	%es
+	ret
+	.size	copy_to_gs, .-copy_to_gs
+
+#endif
arch/i386/boot/string.c new file +52 -0

52 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#17 lore raw

PATCH 17/33 A20 handling code

From: H. Peter Anvin <[email protected]>

A20 handling code for the new x86 setup code. This implements the same algorithms as the assembly version.

---
 arch/i386/boot/a20.c |  161 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 161 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/a20.c
arch/i386/boot/a20.c new file +161 -0
new file mode 100644
index 0000000..31348d0
@@ -0,0 +1,161 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/a20.c
+ *
+ * Enable A20 gate (return -1 on failure)
+ */
+
+#include "boot.h"
+
+#define MAX_8042_LOOPS	100000
+
+static int empty_8042(void)
+{
+	u8 status;
+	int loops = MAX_8042_LOOPS;
+
+	while (loops--) {
+		io_delay();
+
+		status = inb(0x64);
+		if (status & 1) {
+			/* Read and discard input data */
+			io_delay();
+			(void)inb(0x60);
+		} else if (!(status & 2)) {
+			/* Buffers empty, finished! */
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+/* Returns nonzero if the A20 line is enabled.  The memory address
+   used as a test is the int $0x80 vector, which should be safe. */
+
+#define A20_TEST_ADDR	(4*0x80)
+#define A20_TEST_SHORT  32
+#define A20_TEST_LONG	2097152	/* 2^21 */
+
+static int a20_test(int loops)
+{
+	int ok = 0;
+	int saved, ctr;
+
+	set_fs(0x0000);
+	set_gs(0xffff);
+
+	saved = ctr = rdfs32(A20_TEST_ADDR);
+
+	while (loops--) {
+		wrfs32(++ctr, A20_TEST_ADDR);
+		io_delay();	/* Serialize and make delay constant */
+		ok = rdgs32(A20_TEST_ADDR+0x10) ^ ctr;
+		if (ok)
+			break;
+	}
+
+	wrfs32(saved, A20_TEST_ADDR);
+	return ok;
+}
+
+/* Quick test to see if A20 is already enabled */
+static int a20_test_short(void)
+{
+	return a20_test(A20_TEST_SHORT);
+}
+
+/* Longer test that actually waits for A20 to come on line; this
+   is useful when dealing with the KBC or other slow external circuitry. */
+static int a20_test_long(void)
+{
+	return a20_test(A20_TEST_LONG);
+}
+
+static void enable_a20_bios(void)
+{
+	asm volatile("pushfl; int $0x15; popfl"
+		     : : "a" ((u16)0x2401));
+}
+
+static void enable_a20_kbc(void)
+{
+	empty_8042();
+
+	outb(0xd1, 0x64);	/* Command write */
+	empty_8042();
+
+	outb(0xdf, 0x60);	/* A20 on */
+	empty_8042();
+}
+
+static void enable_a20_fast(void)
+{
+	u8 port_a;
+
+	port_a = inb(0x92);	/* Configuration port A */
+	port_a |=  0x02;	/* Enable A20 */
+	port_a &= ~0x01;	/* Do not reset machine */
+	outb(port_a, 0x92);
+}
+
+/*
+ * Actual routine to enable A20; return 0 on ok, -1 on failure
+ */
+
+#define A20_ENABLE_LOOPS 255	/* Number of times to try */
+
+int enable_a20(void)
+{
+	int loops = A20_ENABLE_LOOPS;
+
+#if defined(CONFIG_X86_ELAN)
+	/* Elan croaks if we try to touch the KBC */
+	enable_a20_fast();
+	while (!a20_test_long())
+		;
+	return 0;
+#elif defined(CONFIG_X86_VOYAGER)
+	/* On Voyager, a20_test() is unsafe? */
+	enable_a20_kbc();
+	return 0;
+#else
+	while (loops--) {
+		/* First, check to see if A20 is already enabled
+		   (legacy free, etc.) */
+		if (a20_test_short())
+			return 0;
+
+		/* Next, try the BIOS (INT 0x15, AX=0x2401) */
+		enable_a20_bios();
+		if (a20_test_short())
+			return 0;
+
+		/* Try enabling A20 through the keyboard controller */
+		empty_8042();
+		if (a20_test_short())
+			return 0; /* BIOS worked, but with delayed reaction */
+
+		enable_a20_kbc();
+		if (a20_test_long())
+			return 0;
+
+		/* Finally, try enabling the "fast A20 gate" */
+		enable_a20_fast();
+		if (a20_test_long())
+			return 0;
+	}
+
+	return -1;
+#endif
+}
Signature · 1 line
1.5.2.2
#18 lore raw

PATCH 18/33 APM probing code

From: H. Peter Anvin <[email protected]>

APM probing code for the new x86 setup code. This implements the same functionality as the assembly version.

---
 arch/i386/boot/apm.c |   97 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 97 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/apm.c
arch/i386/boot/apm.c new file +97 -0
new file mode 100644
index 0000000..a34087c
@@ -0,0 +1,97 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   Original APM BIOS checking by Stephen Rothwell, May 1994
+ *   ([email protected])
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/apm.c
+ *
+ * Get APM BIOS information
+ */
+
+#include "boot.h"
+
+#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
+
+int query_apm_bios(void)
+{
+	u16 ax, bx, cx, dx, di;
+	u32 ebx, esi;
+	u8 err;
+
+	/* APM BIOS installation check */
+	ax = 0x5300;
+	bx = cx = 0;
+	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0"
+		     : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx)
+		     : : "esi", "edi");
+
+	if (err)
+		return -1;		/* No APM BIOS */
+
+	if (bx != 0x504d)	/* "PM" signature */
+		return -1;
+
+	if (cx & 0x02)		/* 32 bits supported? */
+		return -1;
+
+	/* Disconnect first, just in case */
+	ax = 0x5304;
+	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp"
+		     : "+a" (ax)
+		     : : "ebx", "ecx", "edx", "esi", "edi");
+
+	/* Paranoia */
+	ebx = esi = 0;
+	cx = dx = di = 0;
+
+	/* 32-bit connect */
+	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %6"
+		     : "=a" (ax), "+b" (ebx), "+c" (cx), "+d" (dx),
+		       "+S" (esi), "+D" (di), "=m" (err)
+		     : "a" (0x5303));
+
+	boot_params.apm_bios_info.cseg = ax;
+	boot_params.apm_bios_info.offset = ebx;
+	boot_params.apm_bios_info.cseg_16 = cx;
+	boot_params.apm_bios_info.dseg = dx;
+	boot_params.apm_bios_info.cseg_len = (u16)esi;
+	boot_params.apm_bios_info.cseg_16_len = esi >> 16;
+	boot_params.apm_bios_info.dseg_len = di;
+
+	if (err)
+		return -1;
+
+	/* Redo the installation check as the 32-bit connect;
+	   some BIOSes return different flags this way... */
+
+	ax = 0x5300;
+	bx = cx = 0;
+	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0"
+		     : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx)
+		     : : "esi", "edi");
+
+	if (err || bx != 0x504d) {
+		/* Failure with 32-bit connect, try to disconect and ignore */
+		ax = 0x5304;
+		bx = 0;
+		asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp"
+			     : "+a" (ax), "+b" (bx)
+			     : : "ecx", "edx", "esi", "edi");
+		return -1;
+	}
+
+	boot_params.apm_bios_info.version = ax;
+	boot_params.apm_bios_info.flags = cx;
+	return 0;
+}
+
+#endif
Signature · 1 line
1.5.2.2
#19 lore raw

PATCH 19/33 Command-line parsing code for the new x86 setup code

From: H. Peter Anvin <[email protected]>

Simple command-line parser which allows us to access the kernel command line from the setup code.

---
 arch/i386/boot/cmdline.c |   97 ++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 97 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/cmdline.c
arch/i386/boot/cmdline.c new file +97 -0
new file mode 100644
index 0000000..34bb778
@@ -0,0 +1,97 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/cmdline.c
+ *
+ * Simple command-line parser for early boot.
+ */
+
+#include "boot.h"
+
+static inline int myisspace(u8 c)
+{
+	return c <= ' ';	/* Close enough approximation */
+}
+
+/*
+ * Find a non-boolean option, that is, "option=argument".  In accordance
+ * with standard Linux practice, if this option is repeated, this returns
+ * the last instance on the command line.
+ *
+ * Returns the length of the argument (regardless of if it was
+ * truncated to fit in the buffer), or -1 on not found.
+ */
+int cmdline_find_option(const char *option, char *buffer, int bufsize)
+{
+	u32 cmdline_ptr = boot_params.hdr.cmd_line_ptr;
+	addr_t cptr;
+	char c;
+	int len = -1;
+	const char *opptr = NULL;
+	char *bufptr = buffer;
+	enum {
+		st_wordstart,	/* Start of word/after whitespace */
+		st_wordcmp,	/* Comparing this word */
+		st_wordskip,	/* Miscompare, skip */
+		st_bufcpy	/* Copying this to buffer */
+	} state = st_wordstart;
+
+	if (!cmdline_ptr || cmdline_ptr >= 0x100000)
+		return -1;	/* No command line, or inaccessible */
+
+	cptr = cmdline_ptr & 0xf;
+	set_fs(cmdline_ptr >> 4);
+
+	while (cptr < 0x10000 && (c = rdfs8(cptr++))) {
+		switch (state) {
+		case st_wordstart:
+			if (myisspace(c))
+				break;
+
+			/* else */
+			state = st_wordcmp;
+			opptr = option;
+			/* fall through */
+
+		case st_wordcmp:
+			if (c == '=' && !*opptr) {
+				len = 0;
+				bufptr = buffer;
+				state = st_bufcpy;
+			} else if (myisspace(c)) {
+				state = st_wordstart;
+			} else if (c != *opptr++) {
+				state = st_wordskip;
+			}
+			break;
+
+		case st_wordskip:
+			if (myisspace(c))
+				state = st_wordstart;
+			break;
+
+		case st_bufcpy:
+			if (myisspace(c)) {
+				state = st_wordstart;
+			} else {
+				if (len < bufsize-1)
+					*bufptr++ = c;
+				len++;
+			}
+			break;
+		}
+	}
+
+	if (bufsize)
+		*bufptr = '\0';
+
+	return len;
+}
Signature · 1 line
1.5.2.2
#20 lore raw

PATCH 20/33 Console-writing code for the new x86 setup code

From: H. Peter Anvin <[email protected]>

This implements writing text to the console, including printf().

---
 arch/i386/boot/printf.c |  307 +++++++++++++++++++++++++++++++++++++++++++++++
 arch/i386/boot/tty.c    |  112 +++++++++++++++++
 2 files changed, 419 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/printf.c
 create mode 100644 arch/i386/boot/tty.c
arch/i386/boot/printf.c new file +307 -0
new file mode 100644
index 0000000..1a09f93
@@ -0,0 +1,307 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/printf.c
+ *
+ * Oh, it's a waste of space, but oh-so-yummy for debugging.  This
+ * version of printf() does not include 64-bit support.  "Live with
+ * it."
+ *
+ */
+
+#include "boot.h"
+
+static int skip_atoi(const char **s)
+{
+	int i = 0;
+
+	while (isdigit(**s))
+		i = i * 10 + *((*s)++) - '0';
+	return i;
+}
+
+#define ZEROPAD	1		/* pad with zero */
+#define SIGN	2		/* unsigned/signed long */
+#define PLUS	4		/* show plus */
+#define SPACE	8		/* space if plus */
+#define LEFT	16		/* left justified */
+#define SPECIAL	32		/* 0x */
+#define LARGE	64		/* use 'ABCDEF' instead of 'abcdef' */
+
+#define do_div(n,base) ({ \
+int __res; \
+__res = ((unsigned long) n) % (unsigned) base; \
+n = ((unsigned long) n) / (unsigned) base; \
+__res; })
+
+static char *number(char *str, long num, int base, int size, int precision,
+		    int type)
+{
+	char c, sign, tmp[66];
+	const char *digits = "0123456789abcdefghijklmnopqrstuvwxyz";
+	int i;
+
+	if (type & LARGE)
+		digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ";
+	if (type & LEFT)
+		type &= ~ZEROPAD;
+	if (base < 2 || base > 36)
+		return 0;
+	c = (type & ZEROPAD) ? '0' : ' ';
+	sign = 0;
+	if (type & SIGN) {
+		if (num < 0) {
+			sign = '-';
+			num = -num;
+			size--;
+		} else if (type & PLUS) {
+			sign = '+';
+			size--;
+		} else if (type & SPACE) {
+			sign = ' ';
+			size--;
+		}
+	}
+	if (type & SPECIAL) {
+		if (base == 16)
+			size -= 2;
+		else if (base == 8)
+			size--;
+	}
+	i = 0;
+	if (num == 0)
+		tmp[i++] = '0';
+	else
+		while (num != 0)
+			tmp[i++] = digits[do_div(num, base)];
+	if (i > precision)
+		precision = i;
+	size -= precision;
+	if (!(type & (ZEROPAD + LEFT)))
+		while (size-- > 0)
+			*str++ = ' ';
+	if (sign)
+		*str++ = sign;
+	if (type & SPECIAL) {
+		if (base == 8)
+			*str++ = '0';
+		else if (base == 16) {
+			*str++ = '0';
+			*str++ = digits[33];
+		}
+	}
+	if (!(type & LEFT))
+		while (size-- > 0)
+			*str++ = c;
+	while (i < precision--)
+		*str++ = '0';
+	while (i-- > 0)
+		*str++ = tmp[i];
+	while (size-- > 0)
+		*str++ = ' ';
+	return str;
+}
+
+int vsprintf(char *buf, const char *fmt, va_list args)
+{
+	int len;
+	unsigned long num;
+	int i, base;
+	char *str;
+	const char *s;
+
+	int flags;		/* flags to number() */
+
+	int field_width;	/* width of output field */
+	int precision;		/* min. # of digits for integers; max
+				   number of chars for from string */
+	int qualifier;		/* 'h', 'l', or 'L' for integer fields */
+
+	for (str = buf; *fmt; ++fmt) {
+		if (*fmt != '%') {
+			*str++ = *fmt;
+			continue;
+		}
+
+		/* process flags */
+		flags = 0;
+	      repeat:
+		++fmt;		/* this also skips first '%' */
+		switch (*fmt) {
+		case '-':
+			flags |= LEFT;
+			goto repeat;
+		case '+':
+			flags |= PLUS;
+			goto repeat;
+		case ' ':
+			flags |= SPACE;
+			goto repeat;
+		case '#':
+			flags |= SPECIAL;
+			goto repeat;
+		case '0':
+			flags |= ZEROPAD;
+			goto repeat;
+		}
+
+		/* get field width */
+		field_width = -1;
+		if (isdigit(*fmt))
+			field_width = skip_atoi(&fmt);
+		else if (*fmt == '*') {
+			++fmt;
+			/* it's the next argument */
+			field_width = va_arg(args, int);
+			if (field_width < 0) {
+				field_width = -field_width;
+				flags |= LEFT;
+			}
+		}
+
+		/* get the precision */
+		precision = -1;
+		if (*fmt == '.') {
+			++fmt;
+			if (isdigit(*fmt))
+				precision = skip_atoi(&fmt);
+			else if (*fmt == '*') {
+				++fmt;
+				/* it's the next argument */
+				precision = va_arg(args, int);
+			}
+			if (precision < 0)
+				precision = 0;
+		}
+
+		/* get the conversion qualifier */
+		qualifier = -1;
+		if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L') {
+			qualifier = *fmt;
+			++fmt;
+		}
+
+		/* default base */
+		base = 10;
+
+		switch (*fmt) {
+		case 'c':
+			if (!(flags & LEFT))
+				while (--field_width > 0)
+					*str++ = ' ';
+			*str++ = (unsigned char)va_arg(args, int);
+			while (--field_width > 0)
+				*str++ = ' ';
+			continue;
+
+		case 's':
+			s = va_arg(args, char *);
+			len = strnlen(s, precision);
+
+			if (!(flags & LEFT))
+				while (len < field_width--)
+					*str++ = ' ';
+			for (i = 0; i < len; ++i)
+				*str++ = *s++;
+			while (len < field_width--)
+				*str++ = ' ';
+			continue;
+
+		case 'p':
+			if (field_width == -1) {
+				field_width = 2 * sizeof(void *);
+				flags |= ZEROPAD;
+			}
+			str = number(str,
+				     (unsigned long)va_arg(args, void *), 16,
+				     field_width, precision, flags);
+			continue;
+
+		case 'n':
+			if (qualifier == 'l') {
+				long *ip = va_arg(args, long *);
+				*ip = (str - buf);
+			} else {
+				int *ip = va_arg(args, int *);
+				*ip = (str - buf);
+			}
+			continue;
+
+		case '%':
+			*str++ = '%';
+			continue;
+
+			/* integer number formats - set up the flags and "break" */
+		case 'o':
+			base = 8;
+			break;
+
+		case 'X':
+			flags |= LARGE;
+		case 'x':
+			base = 16;
+			break;
+
+		case 'd':
+		case 'i':
+			flags |= SIGN;
+		case 'u':
+			break;
+
+		default:
+			*str++ = '%';
+			if (*fmt)
+				*str++ = *fmt;
+			else
+				--fmt;
+			continue;
+		}
+		if (qualifier == 'l')
+			num = va_arg(args, unsigned long);
+		else if (qualifier == 'h') {
+			num = (unsigned short)va_arg(args, int);
+			if (flags & SIGN)
+				num = (short)num;
+		} else if (flags & SIGN)
+			num = va_arg(args, int);
+		else
+			num = va_arg(args, unsigned int);
+		str = number(str, num, base, field_width, precision, flags);
+	}
+	*str = '\0';
+	return str - buf;
+}
+
+int sprintf(char *buf, const char *fmt, ...)
+{
+	va_list args;
+	int i;
+
+	va_start(args, fmt);
+	i = vsprintf(buf, fmt, args);
+	va_end(args);
+	return i;
+}
+
+int printf(const char *fmt, ...)
+{
+	char printf_buf[1024];
+	va_list args;
+	int printed;
+
+	va_start(args, fmt);
+	printed = vsprintf(printf_buf, fmt, args);
+	va_end(args);
+
+	puts(printf_buf);
+
+	return printed;
+}
arch/i386/boot/tty.c new file +112 -0

112 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#21 lore raw

PATCH 21/33 Version string for the new x86 setup code

From: H. Peter Anvin <[email protected]>

Module which only includes the kernel version string.

---
 arch/i386/boot/version.c |   23 +++++++++++++++++++++++
 1 files changed, 23 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/version.c
arch/i386/boot/version.c new file +23 -0
new file mode 100644
index 0000000..c61462f
@@ -0,0 +1,23 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/version.c
+ *
+ * Kernel version string
+ */
+
+#include "boot.h"
+#include <linux/utsrelease.h>
+#include <linux/compile.h>
+
+const char kernel_version[] =
+	UTS_RELEASE " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ") "
+	UTS_VERSION;
Signature · 1 line
1.5.2.2
#22 lore raw

PATCH 22/33 CPU features verification for the new x86 setup code

From: H. Peter Anvin <[email protected]>

Verify that the CPU has enough features to run the kernel. This may entail enabling features on some CPUs.

By doing this in the setup code we can be guaranteed to still be able to write to the console through the BIOS.

---
 arch/i386/boot/cpu.c      |   69 ++++++++++++
 arch/i386/boot/cpucheck.c |  267 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 336 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/cpu.c
 create mode 100644 arch/i386/boot/cpucheck.c
arch/i386/boot/cpu.c new file +69 -0
new file mode 100644
index 0000000..2a5c32d
@@ -0,0 +1,69 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/cpu.c
+ *
+ * Check for obligatory CPU features and abort if the features are not
+ * present.
+ */
+
+#include "boot.h"
+#include "bitops.h"
+#include <asm/cpufeature.h>
+
+static char *cpu_name(int level)
+{
+	static char buf[6];
+
+	if (level == 64) {
+		return "x86-64";
+	} else {
+		sprintf(buf, "i%d86", level);
+		return buf;
+	}
+}
+
+int validate_cpu(void)
+{
+	u32 *err_flags;
+	int cpu_level, req_level;
+
+	check_cpu(&cpu_level, &req_level, &err_flags);
+
+	if (cpu_level < req_level) {
+		printf("This kernel requires an %s CPU, ",
+		       cpu_name(req_level));
+		printf("but only detected an %s CPU.\n",
+		       cpu_name(cpu_level));
+		return -1;
+	}
+
+	if (err_flags) {
+		int i, j;
+		puts("This kernel requires the following features "
+		     "not present on the CPU:\n");
+
+		for (i = 0; i < NCAPINTS; i++) {
+			u32 e = err_flags[i];
+
+			for (j = 0; j < 32; j++) {
+				if (e & 1)
+					printf("%d:%d ", i, j);
+
+				e >>= 1;
+			}
+		}
+		putchar('\n');
+		return -1;
+	} else {
+		return 0;
+	}
+}
arch/i386/boot/cpucheck.c new file +267 -0

267 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#23 lore raw

PATCH 23/33 EDD probing code for the new x86 setup code

From: H. Peter Anvin <[email protected]>

Probe EDD and MBR signatures, in order to make it easier to map physical hard drives to BIOS drives.

---
 arch/i386/boot/edd.c |  196 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 196 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/edd.c
arch/i386/boot/edd.c new file +196 -0
new file mode 100644
index 0000000..25a2824
@@ -0,0 +1,196 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/edd.c
+ *
+ * Get EDD BIOS disk information
+ */
+
+#include "boot.h"
+#include <linux/edd.h>
+
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+
+struct edd_dapa {
+	u8	pkt_size;
+	u8	rsvd;
+	u16	sector_cnt;
+	u16	buf_off, buf_seg;
+	u64	lba;
+	u64	buf_lin_addr;
+};
+
+/*
+ * Read the MBR (first sector) from a specific device.
+ */
+static int read_mbr(u8 devno, void *buf)
+{
+	struct edd_dapa dapa;
+	u16 ax, bx, cx, dx, si;
+
+	memset(&dapa, 0, sizeof dapa);
+	dapa.pkt_size = sizeof(dapa);
+	dapa.sector_cnt = 1;
+	dapa.buf_off = (size_t)buf;
+	dapa.buf_seg = ds();
+	/* dapa.lba = 0; */
+
+	ax = 0x4200;		/* Extended Read */
+	si = (size_t)&dapa;
+	dx = devno;
+	asm("pushfl; stc; int $0x13; setc %%al; popfl"
+	    : "+a" (ax), "+S" (si), "+d" (dx)
+	    : "m" (dapa)
+	    : "ebx", "ecx", "edi", "memory");
+
+	if (!(u8)ax)
+		return 0;	/* OK */
+
+	ax = 0x0201;		/* Legacy Read, one sector */
+	cx = 0x0001;		/* Sector 0-0-1 */
+	dx = devno;
+	bx = (size_t)buf;
+	asm("pushfl; stc; int $0x13; setc %%al; popfl"
+	    : "+a" (ax), "+c" (cx), "+d" (dx), "+b" (bx)
+	    : : "esi", "edi", "memory");
+
+	return -(u8)ax;		/* 0 or -1 */
+}
+
+static u32 read_mbr_sig(u8 devno, struct edd_info *ei)
+{
+	int sector_size;
+	char *mbrbuf_ptr, *mbrbuf_end;
+	u32 mbrsig;
+	u32 buf_base, mbr_base;
+	extern char _end[];
+	static char mbr_buf[1024];
+
+	sector_size = ei->params.bytes_per_sector;
+	if (!sector_size)
+		sector_size = 512; /* Best available guess */
+
+	buf_base = (ds() << 4) + (u32)&_end;
+	mbr_base = (buf_base+sector_size-1) & ~(sector_size-1);
+	mbrbuf_ptr = mbr_buf + (mbr_base-buf_base);
+	mbrbuf_end = mbrbuf_ptr + sector_size;
+
+	if (!(boot_params.hdr.loadflags & CAN_USE_HEAP))
+		return 0;
+	if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr)
+		return 0;
+
+	if (read_mbr(devno, mbrbuf_ptr))
+		return 0;
+
+	mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET];
+	return mbrsig;
+}
+
+static int get_edd_info(u8 devno, struct edd_info *ei)
+{
+	u16 ax, bx, cx, dx, di;
+
+	memset(ei, 0, sizeof *ei);
+
+	/* Check Extensions Present */
+
+	ax = 0x4100;
+	bx = EDDMAGIC1;
+	dx = devno;
+	asm("pushfl; stc; int $0x13; setc %%al; popfl"
+	    : "+a" (ax), "+b" (bx), "=c" (cx), "+d" (dx)
+	    : : "esi", "edi");
+
+	if ((u8)ax)
+		return -1;	/* No extended information */
+
+	if (bx != EDDMAGIC2)
+		return -1;
+
+	ei->device  = devno;
+	ei->version = ax >> 8;	/* EDD version number */
+	ei->interface_support = cx; /* EDD functionality subsets */
+
+	/* Extended Get Device Parameters */
+
+	ei->params.length = sizeof(ei->params);
+	ax = 0x4800;
+	dx = devno;
+	asm("pushfl; int $0x13; popfl"
+	    : "+a" (ax), "+d" (dx)
+	    : "S" (&ei->params)
+	    : "ebx", "ecx", "edi");
+
+	/* Get legacy CHS parameters */
+
+	/* Ralf Brown recommends setting ES:DI to 0:0 */
+	ax = 0x0800;
+	dx = devno;
+	di = 0;
+	asm("pushw %%es; "
+	    "movw %%di,%%es; "
+	    "pushfl; stc; int $0x13; setc %%al; popfl; "
+	    "popw %%es"
+	    : "+a" (ax), "=b" (bx), "=c" (cx), "+d" (dx), "+D" (di)
+	    : : "esi");
+
+	if ((u8)ax == 0) {
+		ei->legacy_max_cylinder = (cx >> 8) + ((cx & 0xc0) << 2);
+		ei->legacy_max_head = dx >> 8;
+		ei->legacy_sectors_per_track = cx & 0x3f;
+	}
+
+	return 0;
+}
+
+void query_edd(void)
+{
+	char eddarg[8];
+	int do_mbr = 1;
+	int do_edd = 1;
+	int devno;
+	struct edd_info ei, *edp;
+
+	if (cmdline_find_option("edd", eddarg, sizeof eddarg) > 0) {
+		if (!strcmp(eddarg, "skipmbr") || !strcmp(eddarg, "skip"))
+			do_mbr = 0;
+		else if (!strcmp(eddarg, "off"))
+			do_edd = 0;
+	}
+
+	edp = (struct edd_info *)boot_params.eddbuf;
+
+	if (!do_edd)
+		return;
+
+	for (devno = 0x80; devno < 0x80+EDD_MBR_SIG_MAX; devno++) {
+		/*
+		 * Scan the BIOS-supported hard disks and query EDD
+		 * information...
+		 */
+		get_edd_info(devno, &ei);
+
+		if (boot_params.eddbuf_entries < EDDMAXNR) {
+			memcpy(edp, &ei, sizeof ei);
+			edp++;
+			boot_params.eddbuf_entries++;
+		}
+
+		if (do_mbr) {
+			u32 mbr_sig;
+			mbr_sig = read_mbr_sig(devno, &ei);
+			boot_params.edd_mbr_sig_buffer[devno-0x80] = mbr_sig;
+		}
+	}
+}
+
+#endif
Signature · 1 line
1.5.2.2
#24 lore raw

PATCH 24/33 MCA support for new x86 setup code

From: H. Peter Anvin <[email protected]>

MCA probing support for the new x86 setup code. This implements the same functionality as the assembly version.

---
 arch/i386/boot/mca.c |   43 +++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 43 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/mca.c
arch/i386/boot/mca.c new file +43 -0
new file mode 100644
index 0000000..9b68bd1
@@ -0,0 +1,43 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/mca.c
+ *
+ * Get the MCA system description table
+ */
+
+#include "boot.h"
+
+int query_mca(void)
+{
+	u8 err;
+	u16 es, bx, len;
+
+	asm("pushw %%es ; "
+	    "int $0x15 ; "
+	    "setc %0 ; "
+	    "movw %%es, %1 ; "
+	    "popw %%es"
+	    : "=acdSDm" (err), "=acdSDm" (es), "=b" (bx)
+	    : "a" (0xc000));
+
+	if (err)
+		return -1;	/* No MCA present */
+
+	set_fs(es);
+	len = rdfs16(bx);
+
+	if (len > sizeof(boot_params.sys_desc_table))
+		len = sizeof(boot_params.sys_desc_table);
+
+	copy_from_fs(&boot_params.sys_desc_table, bx, len);
+	return 0;
+}
Signature · 1 line
1.5.2.2
#25 lore raw

PATCH 25/33 Memory probing support for the new x86 setup code

From: H. Peter Anvin <[email protected]>

Probe memory (INT 15h: E820, E801, 88).

---
 arch/i386/boot/memory.c |   99 +++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 99 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/memory.c
arch/i386/boot/memory.c new file +99 -0
new file mode 100644
index 0000000..1a2e62d
@@ -0,0 +1,99 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/memory.c
+ *
+ * Memory detection code
+ */
+
+#include "boot.h"
+
+#define SMAP	0x534d4150	/* ASCII "SMAP" */
+
+static int detect_memory_e820(void)
+{
+	u32 next = 0;
+	u32 size, id;
+	u8 err;
+	struct e820entry *desc = boot_params.e820_map;
+
+	do {
+		size = sizeof(struct e820entry);
+		id = SMAP;
+		asm("int $0x15; setc %0"
+		    : "=am" (err), "+b" (next), "+d" (id), "+c" (size),
+		      "=m" (*desc)
+		    : "D" (desc), "a" (0xe820));
+
+		if (err || id != SMAP)
+			break;
+
+		boot_params.e820_entries++;
+		desc++;
+	} while (next && boot_params.e820_entries < E820MAX);
+
+	return boot_params.e820_entries;
+}
+
+static int detect_memory_e801(void)
+{
+	u16 ax, bx, cx, dx;
+	u8 err;
+
+	bx = cx = dx = 0;
+	ax = 0xe801;
+	asm("stc; int $0x15; setc %0"
+	    : "=m" (err), "+a" (ax), "+b" (bx), "+c" (cx), "+d" (dx));
+
+	if (err)
+		return -1;
+
+	/* Do we really need to do this? */
+	if (cx || dx) {
+		ax = cx;
+		bx = dx;
+	}
+
+	if (ax > 15*1024)
+		return -1;	/* Bogus! */
+
+	/* This ignores memory above 16MB if we have a memory hole
+	   there.  If someone actually finds a machine with a memory
+	   hole at 16MB and no support for 0E820h they should probably
+	   generate a fake e820 map. */
+	boot_params.alt_mem_k = (ax == 15*1024) ? (dx << 6)+ax : ax;
+
+	return 0;
+}
+
+static int detect_memory_88(void)
+{
+	u16 ax;
+	u8 err;
+
+	ax = 0x8800;
+	asm("stc; int $0x15; setc %0" : "=bcdm" (err), "+a" (ax));
+
+	boot_params.screen_info.ext_mem_k = ax;
+
+	return -err;
+}
+
+int detect_memory(void)
+{
+	if (detect_memory_e820() > 0)
+		return 0;
+
+	if (!detect_memory_e801())
+		return 0;
+
+	return detect_memory_88();
+}
Signature · 1 line
1.5.2.2
#26 lore raw

PATCH 26/33 Voyager support for the new x86 setup code

From: H. Peter Anvin <[email protected]>

Voyager support for the new x86 setup code. This implements the same functionality as the assembly version.

---
 arch/i386/boot/voyager.c |   46 ++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 46 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/voyager.c
arch/i386/boot/voyager.c new file +46 -0
new file mode 100644
index 0000000..9221614
@@ -0,0 +1,46 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/voyager.c
+ *
+ * Get the Voyager config information
+ */
+
+#include "boot.h"
+
+#ifdef CONFIG_X86_VOYAGER
+
+int query_voyager(void)
+{
+	u8 err;
+	u16 es, di;
+	/* Abuse the apm_bios_info area for this */
+	u8 *data_ptr = (u8 *)&boot_params.apm_bios_info;
+
+	data_ptr[0] = 0xff;	/* Flag on config not found(?) */
+
+	asm("pushw %%es ; "
+	    "int $0x15 ; "
+	    "setc %0 ; "
+	    "movw %%es, %1 ; "
+	    "popw %%es"
+	    : "=qm" (err), "=rm" (es), "=D" (di)
+	    : "a" (0xffc0));
+
+	if (err)
+		return -1;	/* Not Voyager */
+
+	set_fs(es);
+	copy_from_fs(data_ptr, di, 7);	/* Table is 7 bytes apparently */
+	return 0;
+}
+
+#endif /* CONFIG_X86_VOYAGER */
Signature · 1 line
1.5.2.2
#27 lore raw

PATCH 27/33 Video mode probing support for the new x86 setup code

From: H. Peter Anvin <[email protected]>

Video mode probing for the new x86 setup code. This code breaks down different drivers into modules. This code deliberately drops support for a lot of the vendor-specific mode probing present in the assembly version, since a lot of those probes have been found to be stale in current versions of those chips -- frequently, support for those modes have been dropped from recent video BIOSes due to space constraints, but the video BIOS signatures are still the same.

However, additional drivers should be extremely straightforward to plug in, if desirable.

---
 arch/i386/boot/vesa.h       |   79 ++++++++
 arch/i386/boot/video-bios.c |  125 ++++++++++++
 arch/i386/boot/video-vesa.c |  284 +++++++++++++++++++++++++++
 arch/i386/boot/video-vga.c  |  260 ++++++++++++++++++++++++
 arch/i386/boot/video.c      |  456 +++++++++++++++++++++++++++++++++++++++++++
 arch/i386/boot/video.h      |  145 ++++++++++++++
 6 files changed, 1349 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/vesa.h
 create mode 100644 arch/i386/boot/video-bios.c
 create mode 100644 arch/i386/boot/video-vesa.c
 create mode 100644 arch/i386/boot/video-vga.c
 create mode 100644 arch/i386/boot/video.c
 create mode 100644 arch/i386/boot/video.h
arch/i386/boot/vesa.h new file +79 -0
new file mode 100644
index 0000000..ff5b73c
@@ -0,0 +1,79 @@
+/* ----------------------------------------------------------------------- *
+ *
+ *   Copyright 1999-2007 H. Peter Anvin - All Rights Reserved
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ *   Boston MA 02111-1307, USA; either version 2 of the License, or
+ *   (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+#ifndef BOOT_VESA_H
+#define BOOT_VESA_H
+
+typedef struct {
+	u16 off, seg;
+} far_ptr;
+
+/* VESA General Information table */
+struct vesa_general_info {
+	u32 signature;		/* 0 Magic number = "VESA" */
+	u16 version;		/* 4 */
+	far_ptr vendor_string;	/* 6 */
+	u32 capabilities;	/* 10 */
+	far_ptr video_mode_ptr;	/* 14 */
+	u16 total_memory;	/* 18 */
+
+	u16 oem_software_rev;	/* 20 */
+	far_ptr oem_vendor_name_ptr;	/* 22 */
+	far_ptr oem_product_name_ptr;	/* 26 */
+	far_ptr oem_product_rev_ptr;	/* 30 */
+
+	u8 reserved[222];	/* 34 */
+	u8 oem_data[256];	/* 256 */
+} __attribute__ ((packed));
+
+#define VESA_MAGIC ('V' + ('E' << 8) + ('S' << 16) + ('A' << 24))
+#define VBE2_MAGIC ('V' + ('B' << 8) + ('E' << 16) + ('2' << 24))
+
+struct vesa_mode_info {
+	u16 mode_attr;		/* 0 */
+	u8 win_attr[2];		/* 2 */
+	u16 win_grain;		/* 4 */
+	u16 win_size;		/* 6 */
+	u16 win_seg[2];		/* 8 */
+	far_ptr win_scheme;	/* 12 */
+	u16 logical_scan;	/* 16 */
+
+	u16 h_res;		/* 18 */
+	u16 v_res;		/* 20 */
+	u8 char_width;		/* 22 */
+	u8 char_height;		/* 23 */
+	u8 memory_planes;	/* 24 */
+	u8 bpp;			/* 25 */
+	u8 banks;		/* 26 */
+	u8 memory_layout;	/* 27 */
+	u8 bank_size;		/* 28 */
+	u8 image_planes;	/* 29 */
+	u8 page_function;	/* 30 */
+
+	u8 rmask;		/* 31 */
+	u8 rpos;		/* 32 */
+	u8 gmask;		/* 33 */
+	u8 gpos;		/* 34 */
+	u8 bmask;		/* 35 */
+	u8 bpos;		/* 36 */
+	u8 resv_mask;		/* 37 */
+	u8 resv_pos;		/* 38 */
+	u8 dcm_info;		/* 39 */
+
+	u32 lfb_ptr;		/* 40 Linear frame buffer address */
+	u32 offscreen_ptr;	/* 44 Offscreen memory address */
+	u16 offscreen_size;	/* 48 */
+
+	u8 reserved[206];	/* 50 */
+} __attribute__ ((packed));
+
+#endif				/* LIB_SYS_VESA_H */
arch/i386/boot/video-bios.c new file +125 -0

125 lines not on this page · raw message

arch/i386/boot/video-vesa.c new file +284 -0

284 lines not on this page · raw message

arch/i386/boot/video-vga.c new file +260 -0

260 lines not on this page · raw message

arch/i386/boot/video.c new file +456 -0

456 lines not on this page · raw message

arch/i386/boot/video.h new file +145 -0

145 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#28 lore raw

PATCH 28/33 Code for actual protected-mode entry

From: H. Peter Anvin <[email protected]>

This is the code which actually does the switch to protected mode, including all preparation. It is also responsible for invoking the boot loader hooks, if present.

---
 arch/i386/boot/pm.c     |  170 +++++++++++++++++++++++++++++++++++++++++++++++
 arch/i386/boot/pmjump.S |   54 +++++++++++++++
 2 files changed, 224 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/pm.c
 create mode 100644 arch/i386/boot/pmjump.S
arch/i386/boot/pm.c new file +170 -0
new file mode 100644
index 0000000..3fa53e1
@@ -0,0 +1,170 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/pm.c
+ *
+ * Prepare the machine for transition to protected mode.
+ */
+
+#include "boot.h"
+#include <asm/segment.h>
+
+/*
+ * Invoke the realmode switch hook if present; otherwise
+ * disable all interrupts.
+ */
+static void realmode_switch_hook(void)
+{
+	if (boot_params.hdr.realmode_swtch) {
+		asm volatile("lcallw *%0"
+			     : : "m" (boot_params.hdr.realmode_swtch)
+			     : "eax", "ebx", "ecx", "edx");
+	} else {
+		asm volatile("cli");
+		outb(0x80, 0x70); /* Disable NMI */
+		io_delay();
+	}
+}
+
+/*
+ * A zImage kernel is loaded at 0x10000 but wants to run at 0x1000.
+ * A bzImage kernel is loaded and runs at 0x100000.
+ */
+static void move_kernel_around(void)
+{
+	/* Note: rely on the compile-time option here rather than
+	   the LOADED_HIGH flag.  The Qemu kernel loader unconditionally
+	   sets the loadflags to zero. */
+#ifndef __BIG_KERNEL__
+	u16 dst_seg, src_seg;
+	u32 syssize;
+
+	dst_seg =  0x1000 >> 4;
+	src_seg = 0x10000 >> 4;
+	syssize = boot_params.hdr.syssize; /* Size in 16-byte paragraphs */
+
+	while (syssize) {
+		int paras  = (syssize >= 0x1000) ? 0x1000 : syssize;
+		int dwords = paras << 2;
+
+		asm volatile("pushw %%es ; "
+			     "pushw %%ds ; "
+			     "movw %1,%%es ; "
+			     "movw %2,%%ds ; "
+			     "xorw %%di,%%di ; "
+			     "xorw %%si,%%si ; "
+			     "rep;movsl ; "
+			     "popw %%ds ; "
+			     "popw %%es"
+			     : "+c" (dwords)
+			     : "rm" (dst_seg), "rm" (src_seg)
+			     : "esi", "edi");
+
+		syssize -= paras;
+		dst_seg += paras;
+		src_seg += paras;
+	}
+#endif
+}
+
+/*
+ * Disable all interrupts at the legacy PIC.
+ */
+static void mask_all_interrupts(void)
+{
+	outb(0xff, 0xa1);	/* Mask all interrupts on the seconday PIC */
+	io_delay();
+	outb(0xfb, 0x21);	/* Mask all but cascade on the primary PIC */
+	io_delay();
+}
+
+/*
+ * Reset IGNNE# if asserted in the FPU.
+ */
+static void reset_coprocessor(void)
+{
+	outb(0, 0xf0);
+	io_delay();
+	outb(0, 0xf1);
+	io_delay();
+}
+
+/*
+ * Set up the GDT
+ */
+#define GDT_ENTRY(flags,base,limit)		\
+	(((u64)(base & 0xff000000) << 32) |	\
+	 ((u64)flags << 40) |			\
+	 ((u64)(limit & 0x00ff0000) << 32) |	\
+	 ((u64)(base & 0x00ffff00) << 16) |	\
+	 ((u64)(limit & 0x0000ffff)))
+
+struct gdt_ptr {
+	u16 len;
+	u32 ptr;
+} __attribute__((packed));
+
+static void setup_gdt(void)
+{
+	/* There are machines which are known to not boot with the GDT
+	   being 8-byte unaligned.  Intel recommends 16 byte alignment. */
+	static const u64 boot_gdt[] __attribute__((aligned(16))) = {
+		/* CS: code, read/execute, 4 GB, base 0 */
+		[GDT_ENTRY_BOOT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff),
+		/* DS: data, read/write, 4 GB, base 0 */
+		[GDT_ENTRY_BOOT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff),
+	};
+	struct gdt_ptr gdt;
+
+	gdt.len = sizeof(boot_gdt)-1;
+	gdt.ptr = (u32)&boot_gdt + (ds() << 4);
+
+	asm volatile("lgdtl %0" : : "m" (gdt));
+}
+
+/*
+ * Set up the IDT
+ */
+static void setup_idt(void)
+{
+	static const struct gdt_ptr null_idt = {0, 0};
+	asm volatile("lidtl %0" : : "m" (null_idt));
+}
+
+/*
+ * Actual invocation sequence
+ */
+void go_to_protected_mode(void)
+{
+	/* Hook before leaving real mode, also disables interrupts */
+	realmode_switch_hook();
+
+	/* Move the kernel/setup to their final resting places */
+	move_kernel_around();
+
+	/* Enable the A20 gate */
+	if (enable_a20()) {
+		puts("A20 gate not responding, unable to boot...\n");
+		die();
+	}
+
+	/* Reset coprocessor (IGNNE#) */
+	reset_coprocessor();
+
+	/* Mask all interrupts in the PIC */
+	mask_all_interrupts();
+
+	/* Actual transition to protected mode... */
+	setup_idt();
+	setup_gdt();
+	protected_mode_jump(boot_params.hdr.code32_start,
+			    (u32)&boot_params + (ds() << 4));
+}
arch/i386/boot/pmjump.S new file +54 -0

54 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#29 lore raw

PATCH 29/33 Assembly header and main routine for new x86 setup code

From: H. Peter Anvin <[email protected]>

The assembly header and initialization code, and the main() routine. main.c also contains some miscellaneous very short routines.

---
 arch/i386/boot/header.S |  283 +++++++++++++++++++++++++++++++++++++++++++++++
 arch/i386/boot/main.c   |  161 +++++++++++++++++++++++++++
 2 files changed, 444 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/header.S
 create mode 100644 arch/i386/boot/main.c
arch/i386/boot/header.S new file +283 -0
new file mode 100644
index 0000000..6b9923f
@@ -0,0 +1,283 @@
+/*
+ *	header.S
+ *
+ *	Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ *	Based on bootsect.S and setup.S
+ *	modified by more people than can be counted
+ *
+ *	Rewritten as a common file by H. Peter Anvin (Apr 2007)
+ *
+ * BIG FAT NOTE: We're in real mode using 64k segments.  Therefore segment
+ * addresses must be multiplied by 16 to obtain their respective linear
+ * addresses. To avoid confusion, linear addresses are written using leading
+ * hex while segment addresses are written as segment:offset.
+ *
+ */
+
+#include <asm/segment.h>
+#include <linux/utsrelease.h>
+#include <asm/boot.h>
+#include <asm/e820.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include "boot.h"
+
+SETUPSECTS	= 4			/* default nr of setup-sectors */
+BOOTSEG		= 0x07C0		/* original address of boot-sector */
+SYSSEG		= DEF_SYSSEG		/* system loaded at 0x10000 (65536) */
+SYSSIZE		= DEF_SYSSIZE		/* system size: # of 16-byte clicks */
+					/* to be loaded */
+ROOT_DEV	= 0			/* ROOT_DEV is now written by "build" */
+SWAP_DEV	= 0			/* SWAP_DEV is now written by "build" */
+
+#ifndef SVGA_MODE
+#define SVGA_MODE ASK_VGA
+#endif
+
+#ifndef RAMDISK
+#define RAMDISK 0
+#endif
+
+#ifndef ROOT_RDONLY
+#define ROOT_RDONLY 1
+#endif
+
+	.code16
+	.section ".bstext", "ax"
+
+	.global bootsect_start
+bootsect_start:
+
+	# Normalize the start address
+	ljmp	$BOOTSEG, $start2
+
+start2:
+	movw	%cs, %ax
+	movw	%ax, %ds
+	movw	%ax, %es
+	movw	%ax, %ss
+	xorw	%sp, %sp
+	sti
+	cld
+
+	movw	$bugger_off_msg, %si
+
+msg_loop:
+	lodsb
+	andb	%al, %al
+	jz	bs_die
+	movb	$0xe, %ah
+	movw	$7, %bx
+	int	$0x10
+	jmp	msg_loop
+
+bs_die:
+	# Allow the user to press a key, then reboot
+	xorw	%ax, %ax
+	int	$0x16
+	int	$0x19
+
+	# int 0x19 should never return.  In case it does anyway,
+	# invoke the BIOS reset code...
+	ljmp	$0xf000,$0xfff0
+
+	.section ".bsdata", "a"
+bugger_off_msg:
+	.ascii	"Direct booting from floppy is no longer supported.\r\n"
+	.ascii	"Please use a boot loader program instead.\r\n"
+	.ascii	"\n"
+	.ascii	"Remove disk and press any key to reboot . . .\r\n"
+	.byte	0
+
+
+	# Kernel attributes; used by setup.  This is part 1 of the
+	# header, from the old boot sector.
+
+	.section ".header", "a"
+	.globl	hdr
+hdr:
+setup_sects:	.byte SETUPSECTS
+root_flags:	.word ROOT_RDONLY
+syssize:	.long SYSSIZE
+ram_size:	.word RAMDISK
+vid_mode:	.word SVGA_MODE
+root_dev:	.word ROOT_DEV
+boot_flag:	.word 0xAA55
+
+	# offset 512, entry point
+
+	.globl	_start
+_start:
+		# Explicitly enter this as bytes, or the assembler
+		# tries to generate a 3-byte jump here, which causes
+		# everything else to push off to the wrong offset.
+		.byte	0xeb		# short (2-byte) jump
+		.byte	start_of_setup-1f
+1:
+
+	# Part 2 of the header, from the old setup.S
+
+		.ascii	"HdrS"		# header signature
+		.word	0x0206		# header version number (>= 0x0105)
+					# or else old loadlin-1.5 will fail)
+		.globl realmode_swtch
+realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
+start_sys_seg:	.word	SYSSEG
+		.word	kernel_version-512 # pointing to kernel version string
+					# above section of header is compatible
+					# with loadlin-1.5 (header v1.5). Don't
+					# change it.
+
+type_of_loader:	.byte	0		# = 0, old one (LILO, Loadlin,
+					#      Bootlin, SYSLX, bootsect...)
+					# See Documentation/i386/boot.txt for
+					# assigned ids
+
+# flags, unused bits must be zero (RFU) bit within loadflags
+loadflags:
+LOADED_HIGH	= 1			# If set, the kernel is loaded high
+CAN_USE_HEAP	= 0x80			# If set, the loader also has set
+					# heap_end_ptr to tell how much
+					# space behind setup.S can be used for
+					# heap purposes.
+					# Only the loader knows what is free
+#ifndef __BIG_KERNEL__
+		.byte	0
+#else
+		.byte	LOADED_HIGH
+#endif
+
+setup_move_size: .word  0x8000		# size to move, when setup is not
+					# loaded at 0x90000. We will move setup
+					# to 0x90000 then just before jumping
+					# into the kernel. However, only the
+					# loader knows how much data behind
+					# us also needs to be loaded.
+
+code32_start:				# here loaders can put a different
+					# start address for 32-bit code.
+#ifndef __BIG_KERNEL__
+		.long	0x1000		#   0x1000 = default for zImage
+#else
+		.long	0x100000	# 0x100000 = default for big kernel
+#endif
+
+ramdisk_image:	.long	0		# address of loaded ramdisk image
+					# Here the loader puts the 32-bit
+					# address where it loaded the image.
+					# This only will be read by the kernel.
+
+ramdisk_size:	.long	0		# its size in bytes
+
+bootsect_kludge:
+		.long	0		# obsolete
+
+heap_end_ptr:	.word	_end+1024	# (Header version 0x0201 or later)
+					# space from here (exclusive) down to
+					# end of setup code can be used by setup
+					# for local heap purposes.
+
+pad1:		.word	0
+cmd_line_ptr:	.long	0		# (Header version 0x0202 or later)
+					# If nonzero, a 32-bit pointer
+					# to the kernel command line.
+					# The command line should be
+					# located between the start of
+					# setup and the end of low
+					# memory (0xa0000), or it may
+					# get overwritten before it
+					# gets read.  If this field is
+					# used, there is no longer
+					# anything magical about the
+					# 0x90000 segment; the setup
+					# can be located anywhere in
+					# low memory 0x10000 or higher.
+
+ramdisk_max:	.long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
+					# (Header version 0x0203 or later)
+					# The highest safe address for
+					# the contents of an initrd
+
+kernel_alignment:  .long CONFIG_PHYSICAL_ALIGN	#physical addr alignment
+						#required for protected mode
+						#kernel
+#ifdef CONFIG_RELOCATABLE
+relocatable_kernel:    .byte 1
+#else
+relocatable_kernel:    .byte 0
+#endif
+pad2:			.byte 0
+pad3:			.word 0
+
+cmdline_size:   .long   COMMAND_LINE_SIZE-1     #length of the command line,
+                                                #added with boot protocol
+                                                #version 2.06
+
+# End of setup header #####################################################
+
+	.section ".inittext", "ax"
+start_of_setup:
+#ifdef SAFE_RESET_DISK_CONTROLLER
+# Reset the disk controller.
+	movw	$0x0000, %ax		# Reset disk controller
+	movb	$0x80, %dl		# All disks
+	int	$0x13
+#endif
+
+# We will have entired with %cs = %ds+0x20, normalize %cs so
+# it is on par with the other segments.
+	pushw	%ds
+	pushw	$setup2
+	lretw
+
+setup2:
+# Force %es = %ds
+	movw	%ds, %ax
+	movw	%ax, %es
+	cld
+
+# Stack paranoia: align the stack and make sure it is good
+# for both 16- and 32-bit references.  In particular, if we
+# were meant to have been using the full 16-bit segment, the
+# caller might have set %sp to zero, which breaks %esp-based
+# references.
+	andw	$~3, %sp	# dword align (might as well...)
+	jnz	1f
+	movw	$0xfffc, %sp	# Make sure we're not zero
+1:	movzwl	%sp, %esp	# Clear upper half of %esp
+	sti
+
+# Check signature at end of setup
+	cmpl	$0x5a5aaa55, setup_sig
+	jne	setup_bad
+
+# Zero the bss
+	movw	$__bss_start, %di
+	movw	$_end+3, %cx
+	xorl	%eax, %eax
+	subw	%di, %cx
+	shrw	$2, %cx
+	rep; stosl
+
+# Jump to C code (should not return)
+	calll	main
+
+# Setup corrupt somehow...
+setup_bad:
+	movl	$setup_corrupt, %eax
+	calll	puts
+	# Fall through...
+
+	.globl	die
+	.type	die, @function
+die:
+	hlt
+	jmp	die
+
+	.size	die, .-due
+
+	.section ".initdata", "a"
+setup_corrupt:
+	.byte	7
+	.string	"No setup signature found..."
arch/i386/boot/main.c new file +161 -0

161 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#30 lore raw

PATCH 30/33 Linker script for the new x86 setup code

From: H. Peter Anvin <[email protected]>

Linker script to define the layout of the new x86 setup code. Includes assert for size overflow and a misaligned setup header.

---
 arch/i386/boot/setup.ld |   54 +++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 54 insertions(+), 0 deletions(-)
 create mode 100644 arch/i386/boot/setup.ld
arch/i386/boot/setup.ld new file +54 -0
new file mode 100644
index 0000000..df9234b
@@ -0,0 +1,54 @@
+/*
+ * setup.ld
+ *
+ * Linker script for the i386 setup code
+ */
+OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(_start)
+
+SECTIONS
+{
+	. = 0;
+	.bstext		: { *(.bstext) }
+	.bsdata		: { *(.bsdata) }
+
+	. = 497;
+	.header		: { *(.header) }
+	.inittext	: { *(.inittext) }
+	.initdata	: { *(.initdata) }
+	.text		: { *(.text*) }
+
+	. = ALIGN(16);
+	.rodata		: { *(.rodata*) }
+
+	.videocards	: {
+		video_cards = .;
+		*(.videocards)
+		video_cards_end = .;
+	}
+
+	. = ALIGN(16);
+	.data		: { *(.data*) }
+
+	.signature	: {
+		setup_sig = .;
+		LONG(0x5a5aaa55)
+	}
+
+
+	. = ALIGN(16);
+	.bss		:
+	{
+		__bss_start = .;
+		*(.bss)
+		__bss_end = .;
+	}
+	. = ALIGN(16);
+	_end = .;
+
+	/DISCARD/ : { *(.note*) }
+
+	. = ASSERT(_end <= 0x8000, "Setup too big!");
+	. = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!");
+}
Signature · 1 line
1.5.2.2
#31 lore raw

PATCH 31/33 Use the new x86 setup code for i386

From: H. Peter Anvin <[email protected]>

This patch hooks the new x86 setup code into the Makefile machinery. It also adapts boot/tools/build.c to a two-file (as opposed to three-file) universe, and simplifies it substantially.

---
 arch/i386/boot/Makefile            |   48 +++++++++--
 arch/i386/boot/compressed/Makefile |    7 ++-
 arch/i386/boot/tools/build.c       |  160 ++++++++++++++++--------------------
 3 files changed, 118 insertions(+), 97 deletions(-)
arch/i386/boot/Makefile +41 -7
index bfbc320..08678a0 100644
@@ -25,27 +25,56 @@ SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
 
 #RAMDISK := -DRAMDISK=512
 
-targets		:= vmlinux.bin bootsect bootsect.o \
-		   setup setup.o zImage bzImage
+targets		:= vmlinux.bin setup.bin setup.elf zImage bzImage
 subdir- 	:= compressed
 
+setup-y		+= a20.o apm.o cmdline.o copy.o cpu.o cpucheck.o edd.o
+setup-y		+= header.o main.o mca.o memory.o pm.o pmjump.o
+setup-y		+= printf.o string.o tty.o video.o version.o voyager.o
+
+# The link order of the video-*.o modules can matter.  In particular,
+# video-vga.o *must* be listed first, followed by video-vesa.o.
+# Hardware-specific drivers should follow in the order they should be
+# probed, and video-bios.o should typically be last.
+setup-y		+= video-vga.o
+setup-y		+= video-vesa.o
+setup-y		+= video-bios.o
+
 hostprogs-y	:= tools/build
 
 HOSTCFLAGS_build.o := $(LINUXINCLUDE)
 
 # ---------------------------------------------------------------------------
 
+# How to compile the 16-bit code.  Note we always compile for -march=i386,
+# that way we can complain to the user if the CPU is insufficient.
+cflags-i386   := 
+cflags-x86_64 := -m32
+CFLAGS		:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
+		   $(cflags-$(ARCH)) \
+		   -Wall -Wstrict-prototypes \
+		   -march=i386 -mregparm=3 \
+		   -include $(srctree)/$(src)/code16gcc.h \
+		   -fno-strict-aliasing -fomit-frame-pointer \
+		   $(call cc-option, -ffreestanding) \
+		   $(call cc-option, -fno-toplevel-reorder,\
+			$(call cc-option, -fno-unit-at-a-time)) \
+		   $(call cc-option, -fno-stack-protector) \
+		   $(call cc-option, -mpreferred-stack-boundary=2)
+AFLAGS		:= $(CFLAGS) -D__ASSEMBLY__
+
 $(obj)/zImage:  IMAGE_OFFSET := 0x1000
 $(obj)/zImage:  EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK)
 $(obj)/bzImage: IMAGE_OFFSET := 0x100000
+$(obj)/bzImage: EXTRA_CFLAGS := -D__BIG_KERNEL__
 $(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
 $(obj)/bzImage: BUILDFLAGS   := -b
 
 quiet_cmd_image = BUILD   $@
-cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \
+cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \
 	    $(obj)/vmlinux.bin $(ROOT_DEV) > $@
 
-$(obj)/zImage $(obj)/bzImage: $(obj)/bootsect $(obj)/setup \
+$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \
 			      $(obj)/vmlinux.bin $(obj)/tools/build FORCE
 	$(call if_changed,image)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
@@ -53,12 +82,17 @@ $(obj)/zImage $(obj)/bzImage: $(obj)/bootsect $(obj)/setup \
 $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
 
-LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
-LDFLAGS_setup	 := -Ttext 0x0 -s --oformat binary -e begtext
+SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
 
-$(obj)/setup $(obj)/bootsect: %: %.o FORCE
+LDFLAGS_setup.elf	:= -T
+$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
 	$(call if_changed,ld)
 
+OBJCOPYFLAGS_setup.bin	:= -O binary
+
+$(obj)/setup.bin: $(obj)/setup.elf FORCE
+	$(call if_changed,objcopy)
+
 $(obj)/compressed/vmlinux: FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
 
arch/i386/boot/compressed/Makefile +6 -1
index a661217..189fa1d 100644
@@ -9,9 +9,14 @@ targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o \
 EXTRA_AFLAGS	:= -traditional
 
 LDFLAGS_vmlinux := -T
-CFLAGS_misc.o += -fPIC
 hostprogs-y	:= relocs
 
+CFLAGS  := -m32 -D__KERNEL__ $(LINUX_INCLUDE) -O2 \
+	   -fno-strict-aliasing -fPIC \
+	   $(call cc-option,-ffreestanding) \
+	   $(call cc-option,-fno-stack-protector)
+LDFLAGS := -m elf_i386
+
 $(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
 	$(call if_changed,ld)
 	@:
arch/i386/boot/tools/build.c +71 -89

234 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#32 lore raw

PATCH 32/33 Use the new x86 setup code for x86-64; unify with i386

From: H. Peter Anvin <[email protected]>

This unifies arch/*/boot (except arch/*/boot/compressed) between i386 and x86-64, and uses the new x86 setup code for x86-64 as well.

---
 arch/x86_64/boot/Makefile            |  136 +------
 arch/x86_64/boot/bootsect.S          |   98 ----
 arch/x86_64/boot/compressed/Makefile |    9 +-
 arch/x86_64/boot/install.sh          |    2 -
 arch/x86_64/boot/mtools.conf.in      |   17 -
 arch/x86_64/boot/setup.S             |  826 ----------------------------------
 arch/x86_64/boot/tools/build.c       |  185 --------
 7 files changed, 10 insertions(+), 1263 deletions(-)
 delete mode 100644 arch/x86_64/boot/bootsect.S
 delete mode 100644 arch/x86_64/boot/install.sh
 delete mode 100644 arch/x86_64/boot/mtools.conf.in
 delete mode 100644 arch/x86_64/boot/setup.S
 delete mode 100644 arch/x86_64/boot/tools/build.c
arch/x86_64/boot/Makefile +5 -131
index ee6f650..6709638 100644
@@ -1,135 +1,9 @@
 #
 # arch/x86_64/boot/Makefile
 #
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-#
-
-# ROOT_DEV specifies the default root-device when making the image.
-# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
-# the default of FLOPPY is used by 'build'.
-
-ROOT_DEV := CURRENT
-
-# If you want to preset the SVGA mode, uncomment the next line and
-# set SVGA_MODE to whatever number you want.
-# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
-# The number is the same as you would ordinarily press at bootup.
-
-SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
-
-# If you want the RAM disk device, define this to be the size in blocks.
-
-#RAMDISK := -DRAMDISK=512
-
-targets		:= vmlinux.bin bootsect bootsect.o \
-		   setup setup.o bzImage mtools.conf
-
-EXTRA_CFLAGS := -m32
-
-hostprogs-y	:= tools/build
-HOST_EXTRACFLAGS += $(LINUXINCLUDE)
-subdir-		:= compressed/	#Let make clean descend in compressed/
-# ---------------------------------------------------------------------------
-
-$(obj)/bzImage: IMAGE_OFFSET := 0x100000
-$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
-$(obj)/bzImage: BUILDFLAGS   := -b
-
-quiet_cmd_image = BUILD   $@
-cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \
-	    $(obj)/vmlinux.bin $(ROOT_DEV) > $@
-
-$(obj)/bzImage: $(obj)/bootsect $(obj)/setup \
-			      $(obj)/vmlinux.bin $(obj)/tools/build FORCE
-	$(call if_changed,image)
-	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
-
-$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
-	$(call if_changed,objcopy)
-
-LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
-LDFLAGS_setup	 := -Ttext 0x0 -s --oformat binary -e begtext
-
-$(obj)/setup $(obj)/bootsect: %: %.o FORCE
-	$(call if_changed,ld)
-
-$(obj)/compressed/vmlinux: FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
-
-# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
-FDARGS = 
-# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
-FDINITRD =
-
-image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
-
-$(obj)/mtools.conf: $(src)/mtools.conf.in
-	sed -e 's|@OBJ@|$(obj)|g' < $< > $@
-
-# This requires write access to /dev/fd0
-zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
-	MTOOLSRC=$(obj)/mtools.conf mformat a:			; sync
-	syslinux /dev/fd0					; sync
-	echo '$(image_cmdline)' | \
-		MTOOLSRC=$(obj)/mtools.conf mcopy - a:syslinux.cfg
-	if [ -f '$(FDINITRD)' ] ; then \
-		MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
-	fi
-	MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux	; sync
-
-# These require being root or having syslinux 2.02 or higher installed
-fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
-	dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
-	MTOOLSRC=$(obj)/mtools.conf mformat v:			; sync
-	syslinux $(obj)/fdimage					; sync
-	echo '$(image_cmdline)' | \
-		MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
-	if [ -f '$(FDINITRD)' ] ; then \
-		MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
-	fi
-	MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux	; sync
-
-fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
-	dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
-	MTOOLSRC=$(obj)/mtools.conf mformat w:			; sync
-	syslinux $(obj)/fdimage					; sync
-	echo '$(image_cmdline)' | \
-		MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
-	if [ -f '$(FDINITRD)' ] ; then \
-		MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
-	fi
-	MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux	; sync
-
-isoimage: $(BOOTIMAGE)
-	-rm -rf $(obj)/isoimage
-	mkdir $(obj)/isoimage
-	for i in lib lib64 share end ; do \
-		if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
-			cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
-			break ; \
-		fi ; \
-		if [ $$i = end ] ; then exit 1 ; fi ; \
-	done
-	cp $(BOOTIMAGE) $(obj)/isoimage/linux
-	echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
-	if [ -f '$(FDINITRD)' ] ; then \
-		cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
-	fi
-	mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
-		-no-emul-boot -boot-load-size 4 -boot-info-table \
-		$(obj)/isoimage
-	rm -rf $(obj)/isoimage
-
-zlilo: $(BOOTIMAGE)
-	if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
-	if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
-	cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
-	cp System.map $(INSTALL_PATH)/
-	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
+# The actual boot code is shared with i386 including the Makefile.
+# So tell kbuild that we fetch the code from i386 and include the
+# Makefile from i386 too.
 
-install:
-	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
+src := arch/i386/boot
+include $(src)/Makefile
arch/x86_64/boot/bootsect.S deleted +0 -98

98 lines not on this page · raw message

arch/x86_64/boot/compressed/Makefile +5 -4
index 705a3e3..c9f2da7 100644
@@ -7,11 +7,12 @@
 #
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
-EXTRA_AFLAGS	:= -traditional
 
-# cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with
-# -m32
-CFLAGS := -m64 -D__KERNEL__ -Iinclude -O2  -fno-strict-aliasing -fPIC -mcmodel=small -fno-builtin
+CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2  \
+	  -fno-strict-aliasing -fPIC -mcmodel=small \
+	   $(call cc-option, -ffreestanding) \
+	   $(call cc-option, -fno-stack-protector)
+AFLAGS  := $(CFLAGS) -D__ASSEMBLY__
 LDFLAGS := -m elf_x86_64
 
 LDFLAGS_vmlinux := -T
arch/x86_64/boot/install.sh deleted +0 -2
deleted file mode 100644
index baaa236..0000000
@@ -1,2 +0,0 @@
-#!/bin/sh
-. $srctree/arch/i386/boot/install.sh
arch/x86_64/boot/mtools.conf.in deleted +0 -17
deleted file mode 100644
index efd6d24..0000000
@@ -1,17 +0,0 @@
-#
-# mtools configuration file for "make (b)zdisk"
-#
-
-# Actual floppy drive
-drive a:
-  file="/dev/fd0"
-
-# 1.44 MB floppy disk image
-drive v:
-  file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=18 filter
-
-# 2.88 MB floppy disk image (mostly for virtual uses)
-drive w:
-  file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter
-
-
arch/x86_64/boot/setup.S deleted +0 -826

826 lines not on this page · raw message

arch/x86_64/boot/tools/build.c deleted +0 -185

185 lines not on this page · raw message

Signature · 1 line
1.5.2.2
#33 lore raw

PATCH 33/33 Remove old i386 setup code

From: H. Peter Anvin <[email protected]>

This removes the old i386 setup code. This is done as a separate patch to avoid breaking git bisect as some of the i386 code was also used by the old x86-64 code.

---
 arch/i386/boot/bootsect.S     |   98 --
 arch/i386/boot/edd.S          |  231 -----
 arch/i386/boot/setup.S        | 1075 ----------------------
 arch/i386/boot/video.S        | 2043 -----------------------------------------
 arch/i386/kernel/verify_cpu.S |   94 --
 include/linux/edd.h           |    4 -
 6 files changed, 0 insertions(+), 3545 deletions(-)
 delete mode 100644 arch/i386/boot/bootsect.S
 delete mode 100644 arch/i386/boot/edd.S
 delete mode 100644 arch/i386/boot/setup.S
 delete mode 100644 arch/i386/boot/video.S
 delete mode 100644 arch/i386/kernel/verify_cpu.S
arch/i386/boot/bootsect.S deleted +0 -98
deleted file mode 100644
index 011b7a4..0000000
@@ -1,98 +0,0 @@
-/*
- *	bootsect.S		Copyright (C) 1991, 1992 Linus Torvalds
- *
- *	modified by Drew Eckhardt
- *	modified by Bruce Evans (bde)
- *	modified by Chris Noe (May 1999) (as86 -> gas)
- *	gutted by H. Peter Anvin (Jan 2003)
- *
- * BIG FAT NOTE: We're in real mode using 64k segments.  Therefore segment
- * addresses must be multiplied by 16 to obtain their respective linear
- * addresses. To avoid confusion, linear addresses are written using leading
- * hex while segment addresses are written as segment:offset.
- *
- */
-
-#include <asm/boot.h>
-
-SETUPSECTS	= 4			/* default nr of setup-sectors */
-BOOTSEG		= 0x07C0		/* original address of boot-sector */
-INITSEG		= DEF_INITSEG		/* we move boot here - out of the way */
-SETUPSEG	= DEF_SETUPSEG		/* setup starts here */
-SYSSEG		= DEF_SYSSEG		/* system loaded at 0x10000 (65536) */
-SYSSIZE		= DEF_SYSSIZE		/* system size: # of 16-byte clicks */
-					/* to be loaded */
-ROOT_DEV	= 0 			/* ROOT_DEV is now written by "build" */
-SWAP_DEV	= 0			/* SWAP_DEV is now written by "build" */
-
-#ifndef SVGA_MODE
-#define SVGA_MODE ASK_VGA
-#endif
-
-#ifndef RAMDISK
-#define RAMDISK 0
-#endif
-
-#ifndef ROOT_RDONLY
-#define ROOT_RDONLY 1
-#endif
-
-.code16
-.text
-
-.global _start
-_start:
-
-	# Normalize the start address
-	jmpl	$BOOTSEG, $start2
-
-start2:
-	movw	%cs, %ax
-	movw	%ax, %ds
-	movw	%ax, %es
-	movw	%ax, %ss
-	movw	$0x7c00, %sp
-	sti
-	cld
-
-	movw	$bugger_off_msg, %si
-
-msg_loop:
-	lodsb
-	andb	%al, %al
-	jz	die
-	movb	$0xe, %ah
-	movw	$7, %bx
-	int	$0x10
-	jmp	msg_loop
-
-die:
-	# Allow the user to press a key, then reboot
-	xorw	%ax, %ax
-	int	$0x16
-	int	$0x19
-
-	# int 0x19 should never return.  In case it does anyway,
-	# invoke the BIOS reset code...
-	ljmp	$0xf000,$0xfff0
-
-
-bugger_off_msg:
-	.ascii	"Direct booting from floppy is no longer supported.\r\n"
-	.ascii	"Please use a boot loader program instead.\r\n"
-	.ascii	"\n"
-	.ascii	"Remove disk and press any key to reboot . . .\r\n"
-	.byte	0
-
-
-	# Kernel attributes; used by setup
-
-	.org 497
-setup_sects:	.byte SETUPSECTS
-root_flags:	.word ROOT_RDONLY
-syssize:	.word SYSSIZE
-swap_dev:	.word SWAP_DEV
-ram_size:	.word RAMDISK
-vid_mode:	.word SVGA_MODE
-root_dev:	.word ROOT_DEV
-boot_flag:	.word 0xAA55
arch/i386/boot/edd.S deleted +0 -231

231 lines not on this page · raw message

arch/i386/boot/setup.S deleted +0 -1075

1,075 lines not on this page · raw message

arch/i386/boot/video.S deleted +0 -2043

1,596 lines not on this page · raw message

arch/i386/kernel/verify_cpu.S deleted +0 -94

94 lines not on this page · raw message

include/linux/edd.h +0 -4
index b2b3e68..7b64782 100644

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
1.5.2.2

Part of the diff is not shown here. View the raw message.

#34 lore raw

Re: [x86 setup 31/33] Use the new x86 setup code for i386

In reply to H. Peter Anvin
Quoted 5 lines · H. Peter Anvin

From: H. Peter Anvin <[email protected]>

This patch hooks the new x86 setup code into the Makefile machinery. It also adapts boot/tools/build.c to a two-file (as opposed to three-file) universe, and simplifies it substantially.

[...]

Quoted 9 lines
arch/i386/boot/tools/build.c +1 -0
index 0579841..886f47d 100644
@@ -1,13 +1,12 @@
 /*
  *  Copyright (C) 1991, 1992  Linus Torvalds
  *  Copyright (C) 1997 Martin Mares
+ *  Copyright (C) 2007 H. Peter Anvin

arch/i386/boot/tools/build.c line 12

Quoted 10 lines
arch/i386/boot/tools/build.c +0 -2
  */
 
 /*
  * This file builds a disk-image from three different files:
  *
- * - bootsect: compatibility mbr which prints an error message if
- *             someone tries to boot the kernel directly.
  * - setup: 8086 machine code, sets up system parm
  * - system: 80386 code for actual system
  *

You might want to change the word "three" to "two" in the first line of that comment.

HTH
T.

Signature · 4 lines
Tilman Schmidt                    E-Mail: [email protected]
Bonn, Germany
Diese Nachricht besteht zu 100% aus wiederverwerteten Bits.
Ungeöffnet mindestens haltbar bis: (siehe Rückseite)

A message that is not in the archive (sent off-list or not yet received): 7aca4ce0a222438c94300a2ea535270a21db8812.1184181208.git.hpa@zytor.com

A message that is not in the archive (sent off-list or not yet received): 509992ad2f618e07db2c72a96f8f5d708bfc6991.1184181208.git.hpa@zytor.com

Acked-by
#37 lore raw

Re: [x86 setup 27/33] Video mode probing support for the new x86 setup code

Quoted 7 lines

Video mode probing for the new x86 setup code. This code breaks down different drivers into modules. This code deliberately drops support for a lot of the vendor-specific mode probing present in the assembly version, since a lot of those probes have been found to be stale in current versions of those chips -- frequently, support for those modes have been dropped from recent video BIOSes due to space constraints, but the video BIOS signatures are still the same.

Have a nice fortnight

Signature · 3 lines
Martin `MJ' Mares                          <[email protected]>   http://mj.ucw.cz/
Faculty of Math and Physics, Charles University, Prague, Czech Rep., Earth
"It's a lemon tree, my dear Watson." -- Sherlock Holmes (?)
#38 lore raw
In reply to H. Peter Anvin
Quoted 21 lines · H. Peter Anvin

This patch set replaces the x86 setup code, which is currently all in assembly, with a version written in C, using the ".code16gcc" feature of binutils (which has been present since at least 2001.)

The new code is vastly easier to read, and, I hope, debug. It should be noted that I found a fair number of minor bugs while going through this code, and have attempted to correct them.

In the process of doing so, it introduces several cleanups, in particular:

- Obsoletes the hd_info field in the boot_params structure; they are only ever used for ST-506 (pre-IDE) drives and are pretty much guaranteed to be wrong on current BIOSes;
- Unifies the CPU feature bits between i386 and x86-64. In the future, it should be possible to use arch/i386/boot/cpucheck.c to do the post-invocation CPU check currently done in arch/x86_64/kernel/trampoline.S, although this patch set doesn't introduce that change.
- boot_params is now a proper structure.

Quoted 1 line

This patchset incorporates all feedback received by 2007-07-11 12:00 PDT.

I'm sure you know what's changed since the last revision, but nobody everybody does :) It would be nice to know what's different from the last posting.

Jeff

#39 lore raw
Quoted 5 lines · Jeff Garzik

I'm sure you know what's changed since the last revision, but nobody everybody does :) It would be nice to know what's different from the last posting.

- Added -fno-toplevel-reorder/-fno-unit-at-a-time to the Makefile; this is necessary for .code16gcc to be safe on all current versions of gcc. Added comment to that effect to code16gcc.h.
- Moved strnlen, atou and isdigit out of printf.c.
- Corrected title of cpu.c and cpucheck.c.
- Fixed "paragraps" typo in pm.c.
- Removed bogus <linux/edd.h> in string.c.
- Removed #include <linux/mmzone.h> from asm-x86/e820.h; according to Andi it isn't needed even for non-_SETUP, and my compile testing seems to confirm that.

Full diff attached.

-hpa

arch/i386/boot/Makefile +2 -0
index e9f46fd..08678a0 100644
@@ -57,6 +57,8 @@ CFLAGS		:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
 		   -include $(srctree)/$(src)/code16gcc.h \
 		   -fno-strict-aliasing -fomit-frame-pointer \
 		   $(call cc-option, -ffreestanding) \
+		   $(call cc-option, -fno-toplevel-reorder,\
+			$(call cc-option, -fno-unit-at-a-time)) \
 		   $(call cc-option, -fno-stack-protector) \
 		   $(call cc-option, -mpreferred-stack-boundary=2)
 AFLAGS		:= $(CFLAGS) -D__ASSEMBLY__
arch/i386/boot/boot.h +7 -1
index 7251ef6..0329c4f 100644
@@ -192,6 +192,11 @@ static inline int memcmp_gs(const void *s1, addr_t s2, size_t len)
 	return diff;
 }
 
+static inline int isdigit(int ch)
+{
+	return (ch >= '0') && (ch <= '9');
+}
+
 /* Heap -- available for dynamic lists. */
 #define STACK_SIZE	512	/* Minimum number of bytes for stack */
 
@@ -261,13 +266,14 @@ void __attribute__((noreturn))
 	protected_mode_jump(u32 entrypoint, u32 bootparams);
 
 /* printf.c */
-unsigned int atou(const char *s);
 int sprintf(char *buf, const char *fmt, ...);
 int vsprintf(char *buf, const char *fmt, va_list args);
 int printf(const char *fmt, ...);
 
 /* string.c */
 int strcmp(const char *str1, const char *str2);
+size_t strnlen(const char *s, size_t maxlen);
+unsigned int atou(const char *s);
 
 /* tty.c */
 void puts(const char *);
arch/i386/boot/code16gcc.h +6 -0
index dbc6414..3bd8480 100644
@@ -2,6 +2,12 @@
  * code16gcc.h
  *
  * This file is -include'd when compiling 16-bit C code.
+ * Note: this asm() needs to be emitted before gcc omits any code.
+ * Depending on gcc version, this requires -fno-unit-at-a-time or
+ * -fno-toplevel-reorder.
+ *
+ * Hopefully gcc will eventually have a real -m16 option so we can
+ * drop this hack long term.
  */
 
 #ifndef __ASSEMBLY__
arch/i386/boot/cpu.c +1 -1
index 042d894..2a5c32d 100644
@@ -9,7 +9,7 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/cpucheck.c
+ * arch/i386/boot/cpu.c
  *
  * Check for obligatory CPU features and abort if the features are not
  * present.
arch/i386/boot/cpucheck.c +1 -1
index 431bef8..8b0f447 100644
@@ -9,7 +9,7 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/cpu.c
+ * arch/i386/boot/cpucheck.c
  *
  * Check for obligatory CPU features and abort if the features are not
  * present.  This code should be compilable as 16-, 32- or 64-bit
arch/i386/boot/pm.c +1 -1
index 4deb298..3fa53e1 100644
@@ -49,7 +49,7 @@ static void move_kernel_around(void)
 
 	dst_seg =  0x1000 >> 4;
 	src_seg = 0x10000 >> 4;
-	syssize = boot_params.hdr.syssize; /* Size in 16-byte paragraps */
+	syssize = boot_params.hdr.syssize; /* Size in 16-byte paragraphs */
 
 	while (syssize) {
 		int paras  = (syssize >= 0x1000) ? 0x1000 : syssize;
arch/i386/boot/printf.c +0 -24
index ee3d9fc..1a09f93 100644
@@ -19,11 +19,6 @@
 
 #include "boot.h"
 
-static inline int isdigit(int ch)
-{
-	return (ch >= '0') && (ch <= '9');
-}
-
 static int skip_atoi(const char **s)
 {
 	int i = 0;
@@ -33,25 +28,6 @@ static int skip_atoi(const char **s)
 	return i;
 }
 
-unsigned int atou(const char *s)
-{
-	unsigned int i = 0;
-	while (isdigit(*s))
-		i = i * 10 + (*s++ - '0');
-	return i;
-}
-
-static int strnlen(const char *s, int maxlen)
-{
-	const char *es = s;
-	while (*es && maxlen) {
-		es++;
-		maxlen--;
-	}
-
-	return (es - s);
-}
-
 #define ZEROPAD	1		/* pad with zero */
 #define SIGN	2		/* unsigned/signed long */
 #define PLUS	4		/* show plus */
arch/i386/boot/string.c +19 -1
index 0808197..481a220 100644
@@ -15,7 +15,6 @@
  */
 
 #include "boot.h"
-#include <linux/edd.h>
 
 int strcmp(const char *str1, const char *str2)
 {
@@ -32,3 +31,22 @@ int strcmp(const char *str1, const char *str2)
 	}
 	return 0;
 }
+
+size_t strnlen(const char *s, size_t maxlen)
+{
+	const char *es = s;
+	while (*es && maxlen) {
+		es++;
+		maxlen--;
+	}
+
+	return (es - s);
+}
+
+unsigned int atou(const char *s)
+{
+	unsigned int i = 0;
+	while (isdigit(*s))
+		i = i * 10 + (*s++ - '0');
+	return i;
+}
include/asm-x86_64/e820.h +0 -4
index 15eb8e2..3486e70 100644
@@ -11,10 +11,6 @@
 #ifndef __E820_HEADER
 #define __E820_HEADER
 
-#ifndef _SETUP
-# include <linux/mmzone.h>
-#endif
-
 #define E820MAP	0x2d0		/* our map */
 #define E820MAX	128		/* number of entries in E820MAP */
 #define E820NR	0x1e8		/* # entries in E820MAP */
#40 lore raw
In reply to H. Peter Anvin
Quoted 6 lines · H. Peter Anvin

This patch set replaces the x86 setup code, which is currently all in assembly, with a version written in C, using the ".code16gcc" feature of binutils (which has been present since at least 2001.)

 76 files changed, 4606 insertions(+), 5209 deletions(-)

I can't really argue against this on any sane grounds - not only is it removing more lines than it adds, but moving from mostly unreadable assembly to C seems a good idea.

How does this impact the size of that code? Do we even care?

But as to how to integrate it, I'm not sure I really want to just merge it. I suspect we would want to have it in some public tree that people actually test at least to some degree first, and the -mm tree seems to make most sense.

I didn't see anything objectionable in the series, although I do think the explanations need to be re-done for a number of them. You seem to have violated the "a single line to explain the patch at the top" rule, and as a result they make no sense for some of them (the explanation for patch 05/33 doesn't parse for me and 07/33 seems to have the single-line problem)

So let's just get this merged. But the question is, do we put it in 2.6.23-rc1, or do we put it in -mm for a few weeks, which would imply waiting for the next merge window? Andrew?

Linus

#41 lore raw
Quoted 28 lines · On Thu, 12 Jul 2007 10:24:48 -0700 (PDT) Linus Torvalds…
Quoted 6 lines · H. Peter Anvin

This patch set replaces the x86 setup code, which is currently all in assembly, with a version written in C, using the ".code16gcc" feature of binutils (which has been present since at least 2001.)

 76 files changed, 4606 insertions(+), 5209 deletions(-)

I can't really argue against this on any sane grounds - not only is it removing more lines than it adds, but moving from mostly unreadable assembly to C seems a good idea.

How does this impact the size of that code? Do we even care?

But as to how to integrate it, I'm not sure I really want to just merge it. I suspect we would want to have it in some public tree that people actually test at least to some degree first, and the -mm tree seems to make most sense.

I didn't see anything objectionable in the series, although I do think the explanations need to be re-done for a number of them. You seem to have violated the "a single line to explain the patch at the top" rule, and as a result they make no sense for some of them (the explanation for patch 05/33 doesn't parse for me and 07/33 seems to have the single-line problem)

Quoted 4 lines

So let's just get this merged. But the question is, do we put it in 2.6.23-rc1, or do we put it in -mm for a few weeks, which would imply waiting for the next merge window? Andrew?

This code has been in -mm since 11 May, as git-newsetup.patch. It has caused (for what it is) astonishingly few problems. Maybe a couple of build glitches and one runtime failure, all quickly fixed.

I'd say it's ready.

#42 lore raw
Quoted 6 lines · Andrew Morton

This code has been in -mm since 11 May, as git-newsetup.patch. It has caused (for what it is) astonishingly few problems. Maybe a couple of build glitches and one runtime failure, all quickly fixed.

I'd say it's ready.

Ok. That makes it easy. I'll just merge it.

Linus

#43 lore raw
In reply to Linus Torvalds
Quoted 8 lines · Linus Torvalds
Quoted 5 lines · H. Peter Anvin

This patch set replaces the x86 setup code, which is currently all in assembly, with a version written in C, using the ".code16gcc" feature of binutils (which has been present since at least 2001.)

Quoted 5 lines
Quoted 1 line
 76 files changed, 4606 insertions(+), 5209 deletions(-)

I can't really argue against this on any sane grounds - not only is it removing more lines than it adds, but moving from mostly unreadable assembly to C seems a good idea.

The only thing questionable is that .code16gcc is arguably quite an abuse of gcc. I even checked with some gcc developers and they weren't too happy about it. e.g. it's not regression tested at all so we would be basically on our own with it.

But yes the code looks good.

-Andi