Hard drive - dead or dying?
My computer (Ubuntu Feisty) would not boot correctly a few days
ago: it seemed to get into a loop with the following printed about every 7 seconds (all laboriously copied in longhand, since it wasn't logged!):
ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.01: (BMDMA stat 0x65)
ata1.01: cmd c8/00:08:80:b4:a8/00:00:00:00:00/f4 tag0 cdb 0x0 data 4096 in
res 51/01:08:80:b4:a8/00:00:00:00:00/f4 Emark 0x1 (device
error)
ata1.01: ata_hpa_resize 1: sectors = 78165360, hpa_sectors : 78165360 ata1.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors : 160086528 ata1.00: configured for UDMA/33
ata1.01: ata_hpa_resize 1: sectors = 78165360, hpa_sectors : 78165360 ata1.01: configured for PIO3
ata1.01: EH complete
Periodically there would be other messages.
Most of this means nothing to me, but after several attempts I concluded that ata1.00 probably refers to /dev/sda, and ata1.01 to /dev/sdb, and that there was a fault with the second.
I disconnected the drive, and the computer booted OK. I have now commented out references to the partitions on /dev/sdb in /etc/fstab.
The drive in question was giving minor problems a couple of years ago, and on advice I bought a new one, but kept the old one for backups etc. Until now, it seems to have behaved pretty well.
Can someone tell me this: has the drive now as-good-as died, or is there any hope of resurrection?
David
Signature · 1 line
David Sumbler <[email protected]>
Quoted 10 lines · David Sumbler
My computer (Ubuntu Feisty) would not boot correctly a few days
ago: it seemed to get into a loop with the following printed about every 7 seconds (all laboriously copied in longhand, since it wasn't logged!):ata1.01: exception Emask
0x0SAct0x0SErr0x0action0x0ata1.01: (BMDMA stat0x65)
ata1.01: cmd c8/00:08:80:b4:a8/00:00:00:00:00/f4 tag0 cdb0x0data 4096 inres 51/01:08:80:b4:a8/00:00:00:00:00/f4 Emark 0x1 (device error)
Use 'smartctl' to find out what the drive is having issues with.
-ml
Quoted 6 lines · Mark Lord
Quoted 5 lines · David Sumbler
My computer (Ubuntu Feisty) would not boot correctly a few days
ago: it seemed to get into a loop with the following printed about every 7 seconds (all laboriously copied in longhand, since it wasn't logged!):
Quoted 7 lines
Quoted 5 lines
ata1.01: exception Emask
0x0SAct0x0SErr0x0action0x0ata1.01: (BMDMA stat0x65)
ata1.01: cmd c8/00:08:80:b4:a8/00:00:00:00:00/f4 tag0 cdb0x0data 4096 inres 51/01:08:80:b4:a8/00:00:00:00:00/f4 Emark 0x1 (device error)Use 'smartctl' to find out what the drive is having issues with.
Unfortunately I cannot boot the computer unless the drive in question is disconnected.
David
Signature · 1 line
David Sumbler <[email protected]>
Quoted 12 lines · David Sumbler
Quoted 11 lines · Mark Lord
Quoted 10 lines · David Sumbler
My computer (Ubuntu Feisty) would not boot correctly a few days
ago: it seemed to get into a loop with the following printed about every 7 seconds (all laboriously copied in longhand, since it wasn't logged!):ata1.01: exception Emask
0x0SAct0x0SErr0x0action0x0ata1.01: (BMDMA stat0x65)
ata1.01: cmd c8/00:08:80:b4:a8/00:00:00:00:00/f4 tag0 cdb0x0data 4096 inres 51/01:08:80:b4:a8/00:00:00:00:00/f4 Emark 0x1 (device error)
Quoted 4 lines
Quoted 1 line
Use 'smartctl' to find out what the drive is having issues with.
Unfortunately I cannot boot the computer unless the drive in question is disconnected.
Hmm... it might take some time but you should be able to. Just don't mount it during boot. Partition code would still try to read partition table which can cause some number of errors but it will eventually give up and let you continue.
Signature · 1 line
tejun