x86_64 EFI support -v3: EFI runtime support
PATCH 3/5 x86_64 EFI support -v3: EFI runtime support
This patch adds runtime service support for EFI x86_64 system.
The EFI support for emergency_restart and RTC clock is added. The EFI based implementation and legacy BIOS or CMOS based implementation are put in separate functions and are chosen based on the value of efi_enabled.
---
reboot.c | 11 ++++++++++- time.c | 47 +++++++++++++++++++++++++++++++---------------- 2 files changed, 41 insertions(+), 17 deletions(-)
arch/x86_64/kernel/reboot.c +10 -1
@@ -9,6 +9,7 @@#include <linux/pm.h> #include <linux/kdebug.h> #include <linux/sched.h> +#include <linux/efi.h> #include <asm/io.h> #include <asm/delay.h> #include <asm/hw_irq.h>
@@ -117,7 +118,7 @@pci_iommu_shutdown (); } -void machine_emergency_restart (void ) +static inline void bios_emergency_restart (void ) {int i;
@@ -145,6 +146,14 @@ } } +void machine_emergency_restart (void ) +{ +if (efi_enabled) +efi_emergency_restart (); +else +bios_emergency_restart (); +} +void machine_restart (char * __unused) {printk ("machine restart\n" );
arch/x86_64/kernel/time.c +31 -16
92 lines not on this page · raw message
Quoted 6 lines · Ying
This patch adds runtime service support for EFI
x86_64system.The EFI support for
emergency_restartand RTC clock is added. The EFI based implementation and legacy BIOS or CMOS based implementation are put in separate functions and are chosen based on the value ofefi_enabled.
The patches to the reboot path are wrong (see below).
Why do we need to do this anyway? Why do we need any EFI runtime support? We already have ACPI. Isn't that good enough to abstract out the runtime parts of the hardware?
Why do we need to replace working code that directly talks to the architecturally defined hardware, with firmware calls?
What is the point? What is the advantage?
The disadvantage of having more code to maintain and having to deal with more BIOS bugs should be obvious.
Quoted 34 lines
Signed-off-by Chandramouli Narayanan <[email protected]>Signed-off-by Huang Ying <[email protected]>---
reboot.c | 11 ++++++++++- time.c | 47 +++++++++++++++++++++++++++++++---------------- 2 files changed, 41 insertions(+), 17 deletions(-)Index:
linux-2.6.23-rc1/arch/x86_64/kernel/reboot.c
===================================================================
---linux-2.6.23-rc1.orig/arch/x86_64/kernel/reboot.c2007-07-23 04:41:00.000000000 +0800
+++linux-2.6.23-rc1/arch/x86_64/kernel/reboot.c2007-07-30 09:26:56.000000000 +0800arch/x86_64/kernel/reboot.c +2
-1@@ -9,6 +9,7 @@#include <linux/pm.h> #include <linux/kdebug.h> #include <linux/sched.h> +#include <linux/efi.h> #include <asm/io.h> #include <asm/delay.h> #include <asm/hw_irq.h> @@ -117,7 +118,7 @@pci_iommu_shutdown (); } -void machine_emergency_restart (void ) +static inline void bios_emergency_restart (void ) {int i;@@ -145,6 +146,14 @@ }
arch/x86_64/kernel/reboot.c line 156
Quoted 10 lines
arch/x86_64/kernel/reboot.c +8
-0} +void machine_emergency_restart (void ) +{ +if (efi_enabled) +efi_emergency_restart (); +else +bios_emergency_restart (); +} +
A EFI is a bios so naming the current machine_emergency_restart bios_emergency_restart is a misnomer, especially since pounds the hardware not the firmware.
Second we already have a perfectly capable mechanism in thereboot_type variable so you should just need to add one more type and handle this properly.
Quoted 107 lines
arch/x86_64/kernel/reboot.c +0
-0void machine_restart (char * __unused) {printk ("machine restart\n" );Index:
linux-2.6.23-rc1/arch/x86_64/kernel/time.c
===================================================================
---linux-2.6.23-rc1.orig/arch/x86_64/kernel/time.c2007-07-23 04:41:00.000000000 +0800
+++linux-2.6.23-rc1/arch/x86_64/kernel/time.c2007-07-30 09:42:12.000000000 +0800arch/x86_64/kernel/time.c +31
-16@@ -27,6 +27,7 @@#include <linux/notifier.h> #include <linux/cpu.h> #include <linux/kallsyms.h> +#include <linux/efi.h> #include <linux/acpi.h> #ifdef CONFIG_ACPI #include <acpi/achware.h> /* for PM timer frequency */ @@ -89,13 +90,6 @@unsigned char control, freq_select;/* -* IRQs are disabled when we're called from the timer interrupt, -* no need for spin_lock_irqsave() -*/ - -spin_lock (&rtc_lock); - -/* * Tell the clock it's being set and stop it. */ @@ -143,14 +137,26 @@CMOS_WRITE (control,RTC_CONTROL );CMOS_WRITE (freq_select,RTC_FREQ_SELECT ); -spin_unlock (&rtc_lock); -return retval; }int update_persistent_clock (struct timespec now) { -return set_rtc_mmss (now.tv_sec); +int retval; + +/* +* IRQs are disabled when we're called from the timer interrupt, +* no need for spin_lock_irqsave() +*/ + +spin_lock (&rtc_lock); +if (efi_enabled) + retval =efi_set_rtc_mmss (now.tv_sec); +else + retval =set_rtc_mmss (now.tv_sec); +spin_unlock (&rtc_lock); + +return retval; }void main_timer_handler (void )@@ -195,14 +201,11 @@return IRQ_HANDLED ; } -unsigned long read_persistent_clock (void ) +unsigned long read_cmos_clock (void ) {unsigned int year, mon, day, hour, min, sec; -unsigned long flags;unsigned century =0 ; -spin_lock_irqsave (&rtc_lock, flags); - do { sec = CMOS_READ(RTC_SECONDS); min = CMOS_READ(RTC_MINUTES);@@ -217,8 +220,6 @@#endif }while (sec !=CMOS_READ (RTC_SECONDS )); -spin_unlock_irqrestore (&rtc_lock, flags); -/* * We know that x86-64 always uses BCD format, no need to check the * config register. @@ -246,6 +247,20 @@return mktime (year, mon, day, hour, min, sec); } +unsigned long read_persistent_clock (void ) +{ +unsigned long flags, retval; + +spin_lock_irqsave (&rtc_lock, flags); +if (efi_enabled) + retval =efi_get_time (); +else + retval =read_cmos_clock (); +spin_unlock_irqrestore (&rtc_lock, flags); + +return retval; +} +/* calibrate_cpu is used on systems with fixed rate TSCs to determine * processor frequency */ #define TICK_COUNT 100000000
Quoted 13 lines · Eric W. Biederman
Quoted 6 lines
This patch adds runtime service support for EFI
x86_64system.The EFI support for
emergency_restartand RTC clock is added. The EFI based implementation and legacy BIOS or CMOS based implementation are put in separate functions and are chosen based on the value ofefi_enabled.The patches to the reboot path are wrong (see below).
Why do we need to do this anyway? Why do we need any EFI runtime support? We already have ACPI. Isn't that good enough to abstract out the runtime parts of the hardware?
Quoted 7 lines
Why do we need to replace working code that directly talks to the architecturally defined hardware, with firmware calls?
What is the point? What is the advantage?
The disadvantage of having more code to maintain and having to deal with more BIOS bugs should be obvious.
The reboot EFI runtime service is needed because otherwise we have no way to tell firmware whether a warm or cold reboot is requested. The "0x472" protocol is used by legacy BIOS, but not by EFI based firmware. For EFI based firmware, the parameter to runtime service call is the only way to tell firmware whether a warm or cold reboot is requested.
That is not implemented by current EFI support patch yet, but we will add it in the next version.
Quoted 36 lines
Quoted 36 lines
Signed-off-by Chandramouli Narayanan <[email protected]>Signed-off-by Huang Ying <[email protected]>---
reboot.c | 11 ++++++++++- time.c | 47 +++++++++++++++++++++++++++++++---------------- 2 files changed, 41 insertions(+), 17 deletions(-)Index:
linux-2.6.23-rc1/arch/x86_64/kernel/reboot.c
===================================================================
---linux-2.6.23-rc1.orig/arch/x86_64/kernel/reboot.c2007-07-23 04:41:00.000000000 +0800
+++linux-2.6.23-rc1/arch/x86_64/kernel/reboot.c2007-07-30 09:26:56.000000000 +0800arch/x86_64/kernel/reboot.c +2
-1@@ -9,6 +9,7 @@#include <linux/pm.h> #include <linux/kdebug.h> #include <linux/sched.h> +#include <linux/efi.h> #include <asm/io.h> #include <asm/delay.h> #include <asm/hw_irq.h> @@ -117,7 +118,7 @@pci_iommu_shutdown (); } -void machine_emergency_restart (void ) +static inline void bios_emergency_restart (void ) {int i;@@ -145,6 +146,14 @@ } }
Quoted 14 lines
arch/x86_64/kernel/reboot.c line 156
Quoted 8 lines
arch/x86_64/kernel/reboot.c +8
-0+void machine_emergency_restart (void ) +{ +if (efi_enabled) +efi_emergency_restart (); +else +bios_emergency_restart (); +} +A EFI is a bios so naming the current
machine_emergency_restartbios_emergency_restartis a misnomer, especially since pounds the hardware not the firmware.
Second we already have a perfectly capable mechanism in thereboot_typevariable so you should just need to add one more type and handle this properly.
Yes. Reboot via EFI should be implemented as a new type of "reboot_type".
Best Regards,
Huang Ying