Skip to contentSkip to conversation

Blackfin updates for 2.6.23-rc3 (GPIO related)

GIT PULL Bryan Wu 1 participant 1 message Aug 13, 2007

lore
Share & tools
lore

Bryan Wu

author
#0 lore raw

Hi Linus,

If you got this email twice, please forgive me for sending it again. Because I found LKML didn't receive this email, let me try again.

Please pull from 'for-linus' branch of

master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6.git for-linus

to receive the following updates:

 arch/blackfin/Kconfig                             |    2 +-
 arch/blackfin/kernel/bfin_gpio.c                  |  323 ++++++++++++++++--
 arch/blackfin/mach-bf548/Kconfig                  |    4 +-
 arch/blackfin/mach-bf548/boards/ezkit.c           |  367 ++++++++++++++++++++-
 arch/blackfin/mach-bf548/gpio.c                   |  103 +++++-
 arch/blackfin/mach-common/ints-priority-dc.c      |    4 +-
 arch/blackfin/mach-common/ints-priority-sc.c      |    8 +-
 include/asm-blackfin/gpio.h                       |   31 ++
 include/asm-blackfin/mach-bf533/bfin_serial_5xx.h |   11 +-
 include/asm-blackfin/mach-bf533/blackfin.h        |    2 +-
 include/asm-blackfin/mach-bf533/irq.h             |    2 +
 include/asm-blackfin/mach-bf537/bfin_serial_5xx.h |   23 +-
 include/asm-blackfin/mach-bf537/blackfin.h        |    2 +-
 include/asm-blackfin/mach-bf537/irq.h             |    2 +
 include/asm-blackfin/mach-bf537/portmux.h         |   35 ++-
 include/asm-blackfin/mach-bf548/bfin_serial_5xx.h |   39 +--
 include/asm-blackfin/mach-bf548/blackfin.h        |    2 +-
 include/asm-blackfin/mach-bf548/gpio.h            |    5 -
 include/asm-blackfin/mach-bf548/irq.h             |    2 +
 include/asm-blackfin/mach-bf561/bfin_serial_5xx.h |   11 +-
 include/asm-blackfin/mach-bf561/blackfin.h        |    2 +-
 include/asm-blackfin/mach-bf561/irq.h             |    2 +
 include/asm-blackfin/portmux.h                    |   22 ++
 23 files changed, 897 insertions(+), 107 deletions(-)

Bryan Wu (2):
Blackfin arch: bug fixing, add missing BF533_FAMILY GPIO_PFx definition Blackfin arch: update platform driver resource information to the ezkitBF548 board file

Michael Hennerich (10):
Blackfin arch: store labels so we later know who allocated GPIO/Peripheral resources Blackfin arch: add peripheral resource allocation support
Blackfin arch: Add label to call new GPIO API
Blackfin arch: fix PORT_J BUG for BF537/6 EMAC driver
Blackfin arch: Finalize the generic gpio support - add gpio_to_irq and irq_to_gpio Blackfin arch: Advertise GENERIC_GPIO and remove duplicated GENERIC_CALIBRATE_DELAY Blackfin arch: Add PORT_J.High (needed for BF548-EZkit Touchscreen interrupts) - remove PORT_C.H Blackfin arch: add missing gpio error handling to make sure we roll back requests in case one fails Blackfin arch: Some cosmetics based on LKML feedback from Joe Perches
Blackfin serial driver: use new GPIO API

Mike Frysinger (1):
Blackfin arch: scrub remaining ASSEMBLY usage since the switch to __ASSEMBLY__

arch/blackfin/Kconfig +1 -1
index 017defa..5c1e215 100644
@@ -57,7 +57,7 @@ config GENERIC_TIME
 	bool
 	default n
 
-config GENERIC_CALIBRATE_DELAY
+config GENERIC_GPIO
 	bool
 	default y
 
arch/blackfin/kernel/bfin_gpio.c +286 -37

454 lines not on this page · raw message

arch/blackfin/mach-bf548/Kconfig +2 -2
index e78b03d..3976b7f 100644
@@ -282,7 +282,7 @@ menu "Assignment"
 
 config PINTx_REASSIGN
 	bool "Reprogram PINT Assignment"
-	default n
+	default y
 	help
 	  The interrupt assignment registers controls the pin-to-interrupt
 	  assignment in a byte-wide manner. Each option allows you to select
@@ -303,7 +303,7 @@ config PINT1_ASSIGN
 config PINT2_ASSIGN
 	hex "PINT2_ASSIGN"
 	depends on PINTx_REASSIGN
-	default 0x00000101
+	default 0x07000101
 config PINT3_ASSIGN
 	hex "PINT3_ASSIGN"
 	depends on PINTx_REASSIGN
arch/blackfin/mach-bf548/boards/ezkit.c +366 -1

399 lines not on this page · raw message

arch/blackfin/mach-bf548/gpio.c +86 -17

212 lines not on this page · raw message

arch/blackfin/mach-common/ints-priority-dc.c +2 -2
index 660f881..d5d9e57 100644
@@ -221,7 +221,7 @@ static unsigned int bf561_gpio_irq_startup(unsigned int irq)
 
 	if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
 
-		ret = gpio_request(gpionr, NULL);
+		ret = gpio_request(gpionr, "IRQ");
 		if (ret)
 			return ret;
 
@@ -261,7 +261,7 @@ static int bf561_gpio_irq_type(unsigned int irq, unsigned int type)
 
 		if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
 
-			ret = gpio_request(gpionr, NULL);
+			ret = gpio_request(gpionr, "IRQ");
 			if (ret)
 				return ret;
 
arch/blackfin/mach-common/ints-priority-sc.c +4 -4
index 4708023..505b948 100644
@@ -343,7 +343,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
 	u16 gpionr = irq - IRQ_PF0;
 
 	if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
-		ret = gpio_request(gpionr, NULL);
+		ret = gpio_request(gpionr, "IRQ");
 		if (ret)
 			return ret;
 	}
@@ -377,7 +377,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
 		    IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
 		if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
-			ret = gpio_request(gpionr, NULL);
+			ret = gpio_request(gpionr, "IRQ");
 			if (ret)
 				return ret;
 		}
@@ -587,7 +587,7 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
 	}
 
 	if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
-		ret = gpio_request(gpionr, NULL);
+		ret = gpio_request(gpionr, "IRQ");
 		if (ret)
 			return ret;
 	}
@@ -627,7 +627,7 @@ static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
 	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
 		    IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
 		if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
-			ret = gpio_request(gpionr, NULL);
+			ret = gpio_request(gpionr, "IRQ");
 			if (ret)
 				return ret;
 		}
include/asm-blackfin/gpio.h +31 -0
index 7480cfa..dd203cd 100644
@@ -144,6 +144,24 @@
 
 #ifdef BF533_FAMILY
 #define MAX_BLACKFIN_GPIOS 16
+
+#define	GPIO_PF0	0
+#define	GPIO_PF1	1
+#define	GPIO_PF2	2
+#define	GPIO_PF3	3
+#define	GPIO_PF4	4
+#define	GPIO_PF5	5
+#define	GPIO_PF6	6
+#define	GPIO_PF7	7
+#define	GPIO_PF8	8
+#define	GPIO_PF9	9
+#define	GPIO_PF10	10
+#define	GPIO_PF11	11
+#define	GPIO_PF12	12
+#define	GPIO_PF13	13
+#define	GPIO_PF14	14
+#define	GPIO_PF15	15
+
 #endif
 
 #ifdef BF537_FAMILY
@@ -421,6 +439,19 @@ unsigned short gpio_get_value(unsigned short gpio);
 void gpio_direction_input(unsigned short gpio);
 void gpio_direction_output(unsigned short gpio);
 
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+#include <asm/irq.h>
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return (gpio + GPIO_IRQ_BASE);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return (irq - GPIO_IRQ_BASE);
+}
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __ARCH_BLACKFIN_GPIO_H__ */
include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +9 -2
index e043caf..69b9f8e 100644
@@ -1,5 +1,6 @@
 #include <linux/serial.h>
 #include <asm/dma.h>
+#include <asm/portmux.h>
 
 #define NR_PORTS                1
 
@@ -92,18 +93,24 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	}
 };
 
+#define DRIVER_NAME "bfin-uart"
 
 int nr_ports = NR_PORTS;
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
 
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	peripheral_request(P_UART0_TX, DRIVER_NAME);
+	peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0) {
-		gpio_request(uart->cts_pin, NULL);
+		gpio_request(uart->cts_pin, DRIVER_NAME);
 		gpio_direction_input(uart->cts_pin);
 	}
 	if (uart->rts_pin >= 0) {
-		gpio_request(uart->rts_pin, NULL);
+		gpio_request(uart->rts_pin, DRIVER_NAME);
 		gpio_direction_input(uart->rts_pin);
 	}
 #endif
include/asm-blackfin/mach-bf533/blackfin.h +1 -1
index e438449..f3b240a 100644
@@ -38,7 +38,7 @@
 #include "defBF532.h"
 #include "anomaly.h"
 
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
 #include "cdefBF532.h"
 #endif
 
include/asm-blackfin/mach-bf533/irq.h +2 -0
index 9879e68..452fb82 100644
@@ -128,6 +128,8 @@ Core        Emulation               **
 #define IRQ_PF14		47
 #define IRQ_PF15		48
 
+#define GPIO_IRQ_BASE		IRQ_PF0
+
 #ifdef CONFIG_IRQCHIP_DEMUX_GPIO
 #define	NR_IRQS		(IRQ_PF15+1)
 #else
include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +14 -9
index 8f5d9c4..6fb328f 100644
@@ -1,5 +1,6 @@
 #include <linux/serial.h>
 #include <asm/dma.h>
+#include <asm/portmux.h>
 
 #define NR_PORTS		2
 
@@ -122,25 +123,29 @@ struct bfin_serial_res bfin_serial_resource[] = {
 
 int nr_ports = ARRAY_SIZE(bfin_serial_resource);
 
+#define DRIVER_NAME "bfin-uart"
+
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
-	unsigned short val;
-	val = bfin_read16(BFIN_PORT_MUX);
-	val &= ~(PFDE | PFTE);
-	bfin_write16(BFIN_PORT_MUX, val);
 
-	val = bfin_read16(PORTF_FER);
-	val |= 0xF;
-	bfin_write16(PORTF_FER, val);
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	peripheral_request(P_UART0_TX, DRIVER_NAME);
+	peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	peripheral_request(P_UART1_TX, DRIVER_NAME);
+	peripheral_request(P_UART1_RX, DRIVER_NAME);
+#endif
 
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0) {
-		gpio_request(uart->cts_pin, NULL);
+		gpio_request(uart->cts_pin, DRIVER_NAME);
 		gpio_direction_input(uart->cts_pin);
 	}
 
 	if (uart->rts_pin >= 0) {
-		gpio_request(uart->rts_pin, NULL);
+		gpio_request(uart->rts_pin, DRIVER_NAME);
 		gpio_direction_output(uart->rts_pin);
 	}
 #endif
include/asm-blackfin/mach-bf537/blackfin.h +1 -1
index bbd9705..f196588 100644
@@ -43,7 +43,7 @@
 #include "defBF537.h"
 #endif
 
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
 #include "cdefBF534.h"
 
 /* UART 0*/
include/asm-blackfin/mach-bf537/irq.h +2 -0
index 8af2a83..36c44bc 100644
@@ -160,6 +160,8 @@ Core        Emulation               **
 #define IRQ_PH14        96
 #define IRQ_PH15        97
 
+#define GPIO_IRQ_BASE	IRQ_PF0
+
 #ifdef CONFIG_IRQCHIP_DEMUX_GPIO
 #define NR_IRQS     (IRQ_PH15+1)
 #else
include/asm-blackfin/mach-bf537/portmux.h +34 -1
index 23e13c5..ae6c53b 100644
@@ -106,4 +106,37 @@
 #define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
 #define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2))
 
-#endif /* _MACH_PORTMUX_H_ */
+#define P_MII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxD2, \
+	P_MII0_ETxD3, \
+	P_MII0_ETxEN, \
+	P_MII0_TxCLK, \
+	P_MII0_PHYINT, \
+	P_MII0_COL, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxD2, \
+	P_MII0_ERxD3, \
+	P_MII0_ERxDV, \
+	P_MII0_ERxCLK, \
+	P_MII0_ERxER, \
+	P_MII0_CRS, \
+	P_MDC, \
+	P_MDIO, 0}
+
+
+#define P_RMII0 {\
+	P_MII0_ETxD0, \
+	P_MII0_ETxD1, \
+	P_MII0_ETxEN, \
+	P_MII0_ERxD0, \
+	P_MII0_ERxD1, \
+	P_MII0_ERxER, \
+	P_RMII0_REF_CLK, \
+	P_RMII0_MDINT, \
+	P_RMII0_CRS_DV, \
+	P_MDC, \
+	P_MDIO, 0}
+#endif			        	/* _MACH_PORTMUX_H_ */
include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +19 -20
index 2f4afc9..f21a162 100644
@@ -1,5 +1,6 @@
 #include <linux/serial.h>
 #include <asm/dma.h>
+#include <asm/portmux.h>
 
 #define NR_PORTS		4
 
@@ -143,50 +144,48 @@ struct bfin_serial_res bfin_serial_resource[] = {
 
 int nr_ports = ARRAY_SIZE(bfin_serial_resource);
 
+#define DRIVER_NAME "bfin-uart"
+
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
 #ifdef CONFIG_SERIAL_BFIN_UART0
-	/* Enable UART0 RX and TX on pin 7 & 8 of PORT E */
-	bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER());
-	bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX());
+	peripheral_request(P_UART0_TX, DRIVER_NAME);
+	peripheral_request(P_UART0_RX, DRIVER_NAME);
 #endif
 
 #ifdef CONFIG_SERIAL_BFIN_UART1
-	/* Enable UART1 RX and TX on pin 0 & 1 of PORT H */
-	bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER());
-	bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX());
+	peripheral_request(P_UART1_TX, DRIVER_NAME);
+	peripheral_request(P_UART1_RX, DRIVER_NAME);
+
 #ifdef CONFIG_BFIN_UART1_CTSRTS
-	/* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */
-	bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER());
-	bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX());
+	peripheral_request(P_UART1_RTS, DRIVER_NAME);
+	peripheral_request(P_UART1_CTS DRIVER_NAME);
 #endif
 #endif
 
 #ifdef CONFIG_SERIAL_BFIN_UART2
-	/* Enable UART2 RX and TX on pin 4 & 5 of PORT B */
-	bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER());
-	bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX());
+	peripheral_request(P_UART2_TX, DRIVER_NAME);
+	peripheral_request(P_UART2_RX, DRIVER_NAME);
 #endif
 
 #ifdef CONFIG_SERIAL_BFIN_UART3
-	/* Enable UART3 RX and TX on pin 6 & 7 of PORT B */
-	bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER());
-	bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX());
+	peripheral_request(P_UART3_TX, DRIVER_NAME);
+	peripheral_request(P_UART3_RX, DRIVER_NAME);
+
 #ifdef CONFIG_BFIN_UART3_CTSRTS
-	/* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */
-	bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER());
-	bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX());
+	peripheral_request(P_UART3_RTS, DRIVER_NAME);
+	peripheral_request(P_UART3_CTS DRIVER_NAME);
 #endif
 #endif
 	SSYNC();
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0) {
-		gpio_request(uart->cts_pin, NULL);
+		gpio_request(uart->cts_pin, DRIVER_NAME);
 		gpio_direction_input(uart->cts_pin);
 	}
 
 	if (uart->rts_pin >= 0) {
-		gpio_request(uart->rts_pin, NULL);
+		gpio_request(uart->rts_pin, DRIVER_NAME);
 		gpio_direction_output(uart->rts_pin);
 	}
 #endif
include/asm-blackfin/mach-bf548/blackfin.h +1 -1
index 791218f..19e84dd 100644
@@ -54,7 +54,7 @@
 #include "defBF549.h"
 #endif
 
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
 #ifdef CONFIG_BF542
 #include "cdefBF542.h"
 #endif
include/asm-blackfin/mach-bf548/gpio.h +0 -5
index dbf66bc..cb8b0f1 100644
@@ -209,8 +209,3 @@ struct gpio_port_t {
 	unsigned short dummy7;
 	unsigned int port_mux;
 };
-
-int gpio_request(unsigned short gpio, const char *label);
-void peripheral_free(unsigned short per);
-int peripheral_request_list(unsigned short per[], const char *label);
-void peripheral_free_list(unsigned short per[]);
include/asm-blackfin/mach-bf548/irq.h +2 -0
index e548d3c..21f06f7 100644
@@ -337,6 +337,8 @@ Events         (highest priority)  EMU         0
 #define IRQ_PJ14	BFIN_PJ_IRQ(14)		/* N/A */
 #define IRQ_PJ15	BFIN_PJ_IRQ(15)		/* N/A */
 
+#define GPIO_IRQ_BASE	IRQ_PA0
+
 #ifdef CONFIG_IRQCHIP_DEMUX_GPIO
 #define NR_IRQS     (IRQ_PJ15+1)
 #else
include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +9 -2
index e043caf..69b9f8e 100644
@@ -1,5 +1,6 @@
 #include <linux/serial.h>
 #include <asm/dma.h>
+#include <asm/portmux.h>
 
 #define NR_PORTS                1
 
@@ -92,18 +93,24 @@ struct bfin_serial_res bfin_serial_resource[] = {
 	}
 };
 
+#define DRIVER_NAME "bfin-uart"
 
 int nr_ports = NR_PORTS;
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
 
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	peripheral_request(P_UART0_TX, DRIVER_NAME);
+	peripheral_request(P_UART0_RX, DRIVER_NAME);
+#endif
+
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0) {
-		gpio_request(uart->cts_pin, NULL);
+		gpio_request(uart->cts_pin, DRIVER_NAME);
 		gpio_direction_input(uart->cts_pin);
 	}
 	if (uart->rts_pin >= 0) {
-		gpio_request(uart->rts_pin, NULL);
+		gpio_request(uart->rts_pin, DRIVER_NAME);
 		gpio_direction_input(uart->rts_pin);
 	}
 #endif
include/asm-blackfin/mach-bf561/blackfin.h +1 -1
index 2537c84..562aee3 100644
@@ -38,7 +38,7 @@
 #include "defBF561.h"
 #include "anomaly.h"
 
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
 #include "cdefBF561.h"
 #endif
 
include/asm-blackfin/mach-bf561/irq.h +2 -0
index a753ce7..1278992 100644
@@ -289,6 +289,8 @@
 #define IRQ_PF46		119
 #define IRQ_PF47		120
 
+#define GPIO_IRQ_BASE		IRQ_PF0
+
 #ifdef CONFIG_IRQCHIP_DEMUX_GPIO
 #define NR_IRQS			(IRQ_PF47 + 1)
 #else
include/asm-blackfin/portmux.h +22 -0
index 9d3681e..d1bcd91 100644
@@ -14,6 +14,12 @@
 #define P_MAYSHARE	0x2000
 #define P_DONTCARE	0x1000
 
+
+int peripheral_request(unsigned short per, const char *label);
+void peripheral_free(unsigned short per);
+int peripheral_request_list(unsigned short per[], const char *label);
+void peripheral_free_list(unsigned short per[]);
+
 #include <asm/gpio.h>
 #include <asm/mach/portmux.h>
 
@@ -513,6 +519,22 @@
 #define P_SPI0_SSEL3 P_UNDEF
 #endif
 
+#ifndef P_SPI0_SSEL4
+#define P_SPI0_SSEL4 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL5
+#define P_SPI0_SSEL5 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL6
+#define P_SPI0_SSEL6 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL7
+#define P_SPI0_SSEL7 P_UNDEF
+#endif
+
 #ifndef P_UART0_TX
 #define P_UART0_TX P_UNDEF
 #endif