2.6.23-rc8-mm2: OOPS in mmc on boot
OOPS followed by a 3 minute timeout, then completion of boot.
Not seen if card (Kingston microSD adapter) is ejected; not seen in 2.6.23-rc8. Running on a Dell XPS M1330 laptop.
dmesg reports:
[ 13.695045] mmcblk0: mmc0:e95c SD02G 1966080KiB [ 13.695155] mmcblk0: p1 [ 13.706907] BUG: unable to handle kernel paging request at virtual address 6b6b6b7a [ 13.707026] printing eip: c01f09f0 *pde = 00000000 [ 13.707174] Oops: 0000 [#1] SMP [ 13.707326] last sysfs file: /class/mmc_host/mmc0/mmc0:e95c/serial [ 13.707389] Modules linked in: mmc_block sr_mod iwl4965 cdrom serio_raw mac80211 piix sdhci pcspkr psmouse ide_core iTCO_wdt iTCO_vendor_support watchdog_core watchdog_dev cfg80211 mmc_core shpchp pci_hotplug intel_agp agpgart battery ac power_supply button evdev ata_generic ext3 jbd mbcache sg sd_mod usbhid hid ahci ata_piix libata scsi_mod ohci1394 tg3 ieee1394 ehci_hcd uhci_hcd thermal processor fan fuse [ 13.709649] [ 13.709705] Pid: 4089, comm: mmcqd Not tainted (2.6.23-rc8-mm2 #27) [ 13.709767] EIP: 0060:[<c01f09f0>] EFLAGS: 00010206 CPU: 0 [ 13.709831] EIP is at blk_rq_map_sg+0xc0/0x160 [ 13.709889] EAX: 04b6a000 EBX: c4a030e0 ECX: 04b6b000 EDX: c1000000 [ 13.709951] ESI: 6b6b6b6a EDI: c11535d0 EBP: c4971e30 ESP: c4971df4 [ 13.710013] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 13.710074] Process mmcqd (pid: 4089, ti=c4970000 task=c387b660 task.ti=c4970000) [ 13.710137] last branch before last exception/interrupt [ 13.710249] from c0129bf8 (vprintk+0x1d8/0x340) [ 13.710359] to c0129c9c (vprintk+0x27c/0x340) [ 13.710453] Stack: c4971e08 c013d85f c48a0440 00002000 04b6c000 c3914180 00000001 00000001 [ 13.710920] 00001000 00000000 c4923700 01000000 c48ca3a0 c48f6d88 c48f6d88 c4971e40 [ 13.711390] f8c39e58 c48f6d88 c4a9f020 c4971fbc f8c396c9 c017de04 00000004 c4971e84 [ 13.711857] Call Trace: [ 13.711971] [<f8c39e58>] mmc_queue_map_sg+0x28/0xc0 [mmc_block] [ 13.712085] [<f8c396c9>] mmc_blk_issue_rq+0x199/0x780 [mmc_block] [ 13.712193] [<f8c3a168>] mmc_queue_thread+0x78/0xe0 [mmc_block] [ 13.712309] [<c013d382>] kthread+0x42/0x70 [ 13.712415] [<c0104e73>] kernel_thread_helper+0x7/0x14 [ 13.712523] ======================= [ 13.712584] Code: 0c 03 4f 08 8b 7f 04 01 cf 89 7d d4 8b 3b 89 f8 29 d0 c1 f8 03 69 c0 39 8e e3 38 c1 e0 0c 03 43 08 39 45 d4 74 73 90 8d 74 26 00 <8b> 46 10 8d 4e 10 89 3e 89 c2 83 e2 fe a8 01 8b 45 e4 0f 45 ca [ 13.715555] EIP: [<c01f09f0>] blk_rq_map_sg+0xc0/0x160 SS:ESP 0068:c4971df4 [ 13.845668] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04753/0x200000 [ 13.879914] input: SynPS/2 Synaptics TouchPad as /class/input/input7 [ 192.162711] Adding 2731008k swap on /dev/sda7. Priority:-1 extents:1 across:2731008k
lspci -vvv reports:
03:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) (prog-if 01)
Subsystem: Dell Unknown device 0209
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe4ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
03:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
Subsystem: Dell Unknown device 0209
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 4
Region 0: Memory at fe4ff500 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
Subsystem: Dell Unknown device 0209
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 4
Region 0: Memory at fe4ff600 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
Subsystem: Dell Unknown device 0209
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 4
Region 0: Memory at fe4ff700 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Quoted 31 lines · On Wed, 03 Oct 2007 23:11:02 -0700 Don Mullis <[email protected]> wrote:
OOPS followed by a 3 minute timeout, then completion of boot.
Not seen if card (Kingston microSD adapter) is ejected; not seen in 2.6.23-rc8. Running on a Dell XPS M1330 laptop.
dmesgreports:[ 13.695045] mmcblk0: mmc0:e95c SD02G 1966080KiB [ 13.695155] mmcblk0: p1 [ 13.706907] BUG: unable to handle kernel paging request at virtual address 6b6b6b7a [ 13.707026] printing eip: c01f09f0 *pde = 00000000 [ 13.707174] Oops: 0000 [#1] SMP [ 13.707326] last sysfs file: /class/mmc_host/mmc0/mmc0:e95c/serial [ 13.707389] Modules linked in: mmc_block sr_mod iwl4965 cdrom serio_raw mac80211 piix sdhci pcspkr psmouse ide_core iTCO_wdt iTCO_vendor_support watchdog_core watchdog_dev cfg80211 mmc_core shpchp pci_hotplug intel_agp agpgart battery ac power_supply button evdev ata_generic ext3 jbd mbcache sg sd_mod usbhid hid ahci ata_piix libata scsi_mod ohci1394 tg3 ieee1394 ehci_hcd uhci_hcd thermal processor fan fuse [ 13.709649] [ 13.709705] Pid: 4089, comm: mmcqd Not tainted (2.6.23-rc8-mm2 #27) [ 13.709767] EIP: 0060:[<c01f09f0>] EFLAGS: 00010206 CPU: 0 [ 13.709831] EIP is at blk_rq_map_sg+0xc0/0x160 [ 13.709889] EAX: 04b6a000 EBX: c4a030e0 ECX: 04b6b000 EDX: c1000000 [ 13.709951] ESI: 6b6b6b6a EDI: c11535d0 EBP: c4971e30 ESP: c4971df4 [ 13.710013] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 13.710074] Process mmcqd (pid: 4089, ti=c4970000 task=c387b660 task.ti=c4970000) [ 13.710137] last branch before last exception/interrupt [ 13.710249] from c0129bf8 (vprintk+0x1d8/0x340) [ 13.710359] to c0129c9c (vprintk+0x27c/0x340) [ 13.710453] Stack: c4971e08 c013d85f c48a0440 00002000 04b6c000 c3914180 00000001 00000001 [ 13.710920] 00001000 00000000 c4923700 01000000 c48ca3a0 c48f6d88 c48f6d88 c4971e40 [ 13.711390] f8c39e58 c48f6d88 c4a9f020 c4971fbc f8c396c9 c017de04 00000004 c4971e84 [ 13.711857] Call Trace: [ 13.711971] [<f8c39e58>] mmc_queue_map_sg+0x28/0xc0 [mmc_block] [ 13.712085] [<f8c396c9>] mmc_blk_issue_rq+0x199/0x780 [mmc_block] [ 13.712193] [<f8c3a168>] mmc_queue_thread+0x78/0xe0 [mmc_block]
Quoted 8 lines
[ 13.712309] [<c013d382>] kthread+0x42/0x70 [ 13.712415] [<c0104e73>] kernel_thread_helper+0x7/0x14 [ 13.712523] ======================= [ 13.712584] Code: 0c 03 4f 08 8b 7f 04 01 cf 89 7d d4 8b 3b 89 f8 29 d0 c1 f8 03 69 c0 39 8e e3 38 c1 e0 0c 03 43 08 39 45 d4 74 73 90 8d 74 26 00 <8b> 46 10 8d 4e 10 89 3e 89 c2 83 e2 fe a8 01 8b 45 e4 0f 45 ca [ 13.715555] EIP: [<c01f09f0>] blk_rq_map_sg+0xc0/0x160 SS:ESP 0068:c4971df4 [ 13.845668] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04753/0x200000 [ 13.879914] input: SynPS/2 Synaptics TouchPad as /class/input/input7 [ 192.162711] Adding 2731008k swap on /dev/sda7. Priority:-1 extents:1 across:2731008k
This could be due to git-block changes (or a lack of them ;))
Quoted 42 lines · Andrew Morton
Quoted 31 lines · On Wed, 03 Oct 2007 23:11:02 -0700 Don Mullis <[email protected]> wrote:
OOPS followed by a 3 minute timeout, then completion of boot.
Not seen if card (Kingston microSD adapter) is ejected; not seen in 2.6.23-rc8. Running on a Dell XPS M1330 laptop.
dmesgreports:[ 13.695045] mmcblk0: mmc0:e95c SD02G 1966080KiB [ 13.695155] mmcblk0: p1 [ 13.706907] BUG: unable to handle kernel paging request at virtual address 6b6b6b7a [ 13.707026] printing eip: c01f09f0 *pde = 00000000 [ 13.707174] Oops: 0000 [#1] SMP [ 13.707326] last sysfs file: /class/mmc_host/mmc0/mmc0:e95c/serial [ 13.707389] Modules linked in: mmc_block sr_mod iwl4965 cdrom serio_raw mac80211 piix sdhci pcspkr psmouse ide_core iTCO_wdt iTCO_vendor_support watchdog_core watchdog_dev cfg80211 mmc_core shpchp pci_hotplug intel_agp agpgart battery ac power_supply button evdev ata_generic ext3 jbd mbcache sg sd_mod usbhid hid ahci ata_piix libata scsi_mod ohci1394 tg3 ieee1394 ehci_hcd uhci_hcd thermal processor fan fuse [ 13.709649] [ 13.709705] Pid: 4089, comm: mmcqd Not tainted (2.6.23-rc8-mm2 #27) [ 13.709767] EIP: 0060:[<c01f09f0>] EFLAGS: 00010206 CPU: 0 [ 13.709831] EIP is at blk_rq_map_sg+0xc0/0x160 [ 13.709889] EAX: 04b6a000 EBX: c4a030e0 ECX: 04b6b000 EDX: c1000000 [ 13.709951] ESI: 6b6b6b6a EDI: c11535d0 EBP: c4971e30 ESP: c4971df4 [ 13.710013] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 13.710074] Process mmcqd (pid: 4089, ti=c4970000 task=c387b660 task.ti=c4970000) [ 13.710137] last branch before last exception/interrupt [ 13.710249] from c0129bf8 (vprintk+0x1d8/0x340) [ 13.710359] to c0129c9c (vprintk+0x27c/0x340) [ 13.710453] Stack: c4971e08 c013d85f c48a0440 00002000 04b6c000 c3914180 00000001 00000001 [ 13.710920] 00001000 00000000 c4923700 01000000 c48ca3a0 c48f6d88 c48f6d88 c4971e40 [ 13.711390] f8c39e58 c48f6d88 c4a9f020 c4971fbc f8c396c9 c017de04 00000004 c4971e84 [ 13.711857] Call Trace: [ 13.711971] [<f8c39e58>] mmc_queue_map_sg+0x28/0xc0 [mmc_block] [ 13.712085] [<f8c396c9>] mmc_blk_issue_rq+0x199/0x780 [mmc_block] [ 13.712193] [<f8c3a168>] mmc_queue_thread+0x78/0xe0 [mmc_block]Quoted 8 lines
[ 13.712309] [<c013d382>] kthread+0x42/0x70 [ 13.712415] [<c0104e73>] kernel_thread_helper+0x7/0x14 [ 13.712523] ======================= [ 13.712584] Code: 0c 03 4f 08 8b 7f 04 01 cf 89 7d d4 8b 3b 89 f8 29 d0 c1 f8 03 69 c0 39 8e e3 38 c1 e0 0c 03 43 08 39 45 d4 74 73 90 8d 74 26 00 <8b> 46 10 8d 4e 10 89 3e 89 c2 83 e2 fe a8 01 8b 45 e4 0f 45 ca [ 13.715555] EIP: [<c01f09f0>] blk_rq_map_sg+0xc0/0x160 SS:ESP 0068:c4971df4 [ 13.845668] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04753/0x200000 [ 13.879914] input: SynPS/2 Synaptics TouchPad as /class/input/input7 [ 192.162711] Adding 2731008k swap on /dev/sda7. Priority:-1 extents:1 across:2731008k
Quoted 1 line
This could be due to git-block changes (or a lack of them ;))
It looks like missing init of the sg list in mmc, does this work?
drivers/mmc/card/queue.c renamed from drivers/mmc/card/queue.c~ +7 -3
@@ -334,14 +334,18 @@ static void copy_sg(struct scatterlist *unsigned int mmc_queue_map_sg (struct mmc_queue *mq) { +struct request *rq = mq->req;unsigned int sg_len; -if (!mq->bounce_buf) -return blk_rq_map_sg (mq->queue, mq->req, mq->sg); +if (!mq->bounce_buf) { +memset (mq->sg,0 , rq->nr_hw_segments *sizeof (struct scatterlist )); +return blk_rq_map_sg (mq->queue, rq, mq->sg); + }BUG_ON (!mq->bounce_sg); - sg_len =blk_rq_map_sg (mq->queue, mq->req, mq->bounce_sg); +memset (mq->bounce_sg,0 , rq->nr_hw_segments *sizeof (struct scatterlist )); + sg_len =blk_rq_map_sg (mq->queue, rq, mq->bounce_sg); mq->bounce_sg_len = sg_len;
Signature · 1 line
Jens Axboe
Quoted 3 lines · On Thu, 4 Oct 2007 09:25:15 +0200 Jens Axboe <[email protected]> wrote:
It looks like missing init of the sg list in mmc, does this work?
Huh? Isn't the block layer supposed to fill in the entire thing? (i.e. current contents shouldn't matter)
Rgds
Pierre
Quoted 9 lines · Pierre Ossman
Quoted 3 lines · On Thu, 4 Oct 2007 09:25:15 +0200 Jens Axboe <[email protected]> wrote:
It looks like missing init of the sg list in mmc, does this work?
Huh? Isn't the block layer supposed to fill in the entire thing? (i.e. current contents shouldn't matter)
Yeah, but sg chaining requires that ->page be filled in properly or it could confuse it. I think I'll add some debugging to catch that.
Signature · 1 line
Jens Axboe
Quoted 8 lines · On Thu, 4 Oct 2007 10:06:32 +0200 Jens Axboe <[email protected]> wrote:
Quoted 3 lines · Pierre Ossman
Huh? Isn't the block layer supposed to fill in the entire thing? (i.e. current contents shouldn't matter)
Yeah, but sg chaining requires that ->page be filled in properly or it could confuse it. I think I'll add some debugging to catch that.
I assume sg_init_one() still can work on an uninitialized sg entry?
Rgds
Pierre
Quoted 5 lines · Pierre Ossman
Quoted 2 lines · On Thu, 4 Oct 2007 10:06:32 +0200 Jens Axboe <[email protected]> wrote:
Quoted 1 line · Pierre Ossman
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
Huh? Isn't the block layer supposed to fill in the entire thing? (i.e. current contents shouldn't matter)
Yeah, but sg chaining requires that ->page be filled in properly or it could confuse it. I think I'll add some debugging to catch that.
I assume
sg_init_one()still can work on an uninitialized sg entry?
Yes, but only if that sg entry is not part of a chained list.
Signature · 1 line
Jens Axboe
Quoted 6 lines · On Thu, 4 Oct 2007 11:30:14 +0200 Jens Axboe <[email protected]> wrote:
Quoted 2 lines · Pierre Ossman
I assume
sg_init_one()still can work on an uninitialized sg entry?Yes, but only if that sg entry is not part of a chained list.
Is that a yes or a no? You said that the ->page field was involved in list chaining, so does or doesn't it have to be initialized before a call to sg_init_one()?
Rgds
Pierre
Quoted 11 lines · Pierre Ossman
Quoted 6 lines · On Thu, 4 Oct 2007 11:30:14 +0200 Jens Axboe <[email protected]> wrote:
Quoted 2 lines · Pierre Ossman
I assume
sg_init_one()still can work on an uninitialized sg entry?Yes, but only if that sg entry is not part of a chained list.
Is that a yes or a no? You said that the ->page field was involved in
It's a conditional yes, re-read it :-)
Quoted 2 lines
list chaining, so does or doesn't it have to be initialized before a call to
sg_init_one()?
That's not the problem. It has to be initialized before calling blk_rq_map_sg(). sg_init_one() will zero the entire sg entry, and that breaks if that particular sg entry is part of a larger sg table AND that sg entry happens to be the chain element.
Signature · 1 line
Jens Axboe
Quoted 7 lines · On Thu, 4 Oct 2007 12:38:05 +0200 Jens Axboe <[email protected]> wrote:
Quoted 3 lines · Pierre Ossman
Is that a yes or a no? You said that the ->page field was involved in
It's a conditional yes, re-read it :-)
I didn't get the memo about what chained sg entries entail.
Quoted 8 lines
Quoted 2 lines
list chaining, so does or doesn't it have to be initialized before a call to
sg_init_one()?That's not the problem. It has to be initialized before calling
blk_rq_map_sg().sg_init_one()will zero the entire sg entry, and that breaks if that particular sg entry is part of a larger sg table AND that sg entry happens to be the chain element.
Ok, then it shouldn't affect my world at least.
Rgds
Pierre
PS. Did someone forget to do a review of all blk_rq_map_sg() callers before committing the chained list stuff? ;)
Quoted 5 lines · Pierre Ossman
Quoted 2 lines · On Thu, 4 Oct 2007 12:38:05 +0200 Jens Axboe <[email protected]> wrote:
Quoted 1 line · Pierre Ossman
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Is that a yes or a no? You said that the ->page field was involved in
It's a conditional yes, re-read it :-)
I didn't get the memo about what chained sg entries entail.
It's been posted here several times, but that's ok and it should not matter. I just can't answer your question with a clear yes or no, since it depends on certain situations.
Quoted 10 lines
Quoted 8 lines
Quoted 2 lines
list chaining, so does or doesn't it have to be initialized before a call to
sg_init_one()?That's not the problem. It has to be initialized before calling
blk_rq_map_sg().sg_init_one()will zero the entire sg entry, and that breaks if that particular sg entry is part of a larger sg table AND that sg entry happens to be the chain element.Ok, then it shouldn't affect my world at least.
No, I think mmc is fine, it just needed that memset.
Quoted 2 lines
PS. Did someone forget to do a review of all
blk_rq_map_sg()callers before committing the chained list stuff? ;)
Apparently this one got missed (and cciss), I'll do a new look just to be on the safe side.
Signature · 1 line
Jens Axboe
This patch fixes the boot.
Quoted 72 lines · Jens Axboe
Quoted 42 lines · Andrew Morton
Quoted 31 lines · On Wed, 03 Oct 2007 23:11:02 -0700 Don Mullis <[email protected]> wrote:
OOPS followed by a 3 minute timeout, then completion of boot.
Not seen if card (Kingston microSD adapter) is ejected; not seen in 2.6.23-rc8. Running on a Dell XPS M1330 laptop.
dmesgreports:[ 13.695045] mmcblk0: mmc0:e95c SD02G 1966080KiB [ 13.695155] mmcblk0: p1 [ 13.706907] BUG: unable to handle kernel paging request at virtual address 6b6b6b7a [ 13.707026] printing eip: c01f09f0 *pde = 00000000 [ 13.707174] Oops: 0000 [#1] SMP [ 13.707326] last sysfs file: /class/mmc_host/mmc0/mmc0:e95c/serial [ 13.707389] Modules linked in: mmc_block sr_mod iwl4965 cdrom serio_raw mac80211 piix sdhci pcspkr psmouse ide_core iTCO_wdt iTCO_vendor_support watchdog_core watchdog_dev cfg80211 mmc_core shpchp pci_hotplug intel_agp agpgart battery ac power_supply button evdev ata_generic ext3 jbd mbcache sg sd_mod usbhid hid ahci ata_piix libata scsi_mod ohci1394 tg3 ieee1394 ehci_hcd uhci_hcd thermal processor fan fuse [ 13.709649] [ 13.709705] Pid: 4089, comm: mmcqd Not tainted (2.6.23-rc8-mm2 #27) [ 13.709767] EIP: 0060:[<c01f09f0>] EFLAGS: 00010206 CPU: 0 [ 13.709831] EIP is at blk_rq_map_sg+0xc0/0x160 [ 13.709889] EAX: 04b6a000 EBX: c4a030e0 ECX: 04b6b000 EDX: c1000000 [ 13.709951] ESI: 6b6b6b6a EDI: c11535d0 EBP: c4971e30 ESP: c4971df4 [ 13.710013] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 13.710074] Process mmcqd (pid: 4089, ti=c4970000 task=c387b660 task.ti=c4970000) [ 13.710137] last branch before last exception/interrupt [ 13.710249] from c0129bf8 (vprintk+0x1d8/0x340) [ 13.710359] to c0129c9c (vprintk+0x27c/0x340) [ 13.710453] Stack: c4971e08 c013d85f c48a0440 00002000 04b6c000 c3914180 00000001 00000001 [ 13.710920] 00001000 00000000 c4923700 01000000 c48ca3a0 c48f6d88 c48f6d88 c4971e40 [ 13.711390] f8c39e58 c48f6d88 c4a9f020 c4971fbc f8c396c9 c017de04 00000004 c4971e84 [ 13.711857] Call Trace: [ 13.711971] [<f8c39e58>] mmc_queue_map_sg+0x28/0xc0 [mmc_block] [ 13.712085] [<f8c396c9>] mmc_blk_issue_rq+0x199/0x780 [mmc_block] [ 13.712193] [<f8c3a168>] mmc_queue_thread+0x78/0xe0 [mmc_block]Quoted 8 lines
[ 13.712309] [<c013d382>] kthread+0x42/0x70 [ 13.712415] [<c0104e73>] kernel_thread_helper+0x7/0x14 [ 13.712523] ======================= [ 13.712584] Code: 0c 03 4f 08 8b 7f 04 01 cf 89 7d d4 8b 3b 89 f8 29 d0 c1 f8 03 69 c0 39 8e e3 38 c1 e0 0c 03 43 08 39 45 d4 74 73 90 8d 74 26 00 <8b> 46 10 8d 4e 10 89 3e 89 c2 83 e2 fe a8 01 8b 45 e4 0f 45 ca [ 13.715555] EIP: [<c01f09f0>] blk_rq_map_sg+0xc0/0x160 SS:ESP 0068:c4971df4 [ 13.845668] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04753/0x200000 [ 13.879914] input: SynPS/2 Synaptics TouchPad as /class/input/input7 [ 192.162711] Adding 2731008k swap on /dev/sda7. Priority:-1 extents:1 across:2731008kQuoted 1 line
This could be due to git-block changes (or a lack of them ;))
It looks like missing init of the sg list in mmc, does this work?
drivers/mmc/card/queue.c renamed from drivers/mmc/card/queue.c~ +7
-3@@ -334,14 +334,18 @@ static void copy_sg(struct scatterlist *unsigned int mmc_queue_map_sg (struct mmc_queue *mq) { +struct request *rq = mq->req;unsigned int sg_len; -if (!mq->bounce_buf) -return blk_rq_map_sg (mq->queue, mq->req, mq->sg); +if (!mq->bounce_buf) { +memset (mq->sg,0 , rq->nr_hw_segments *sizeof (struct scatterlist )); +return blk_rq_map_sg (mq->queue, rq, mq->sg); + }BUG_ON (!mq->bounce_sg); - sg_len =blk_rq_map_sg (mq->queue, mq->req, mq->bounce_sg); +memset (mq->bounce_sg,0 , rq->nr_hw_segments *sizeof (struct scatterlist )); + sg_len =blk_rq_map_sg (mq->queue, rq, mq->bounce_sg); mq->bounce_sg_len = sg_len;
Quoted 2 lines · On Thu, 04 Oct 2007 09:19:40 -0700 Don Mullis <[email protected]> wrote:
This patch fixes the boot.
Fantastic. Then will try to get this upstream then.
Quoted 3 lines
Quoted 3 lines
It looks like missing init of the sg list in mmc, does this work?
Jens, is this zeroing needed for each invocation, or really just once to get the list in a known state?
Also, is chaining already upstream so Linus should have this for 2.6.23?
Rgds
Pierre
Quoted 7 lines · Pierre Ossman
Quoted 2 lines · On Thu, 04 Oct 2007 09:19:40 -0700 Don Mullis <[email protected]> wrote:
This patch fixes the boot.
Fantastic. Then will try to get this upstream then.
I already put it in the sgchain drivers part. If you could please ack it, that would be nice :-). I have a bunch of driver updates/work-arounds there.
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
It looks like missing init of the sg list in mmc, does this work?
Jens, is this zeroing needed for each invocation, or really just once to get the list in a known state?
Once should actually be enough, so you could move it to init as well. Don, care to verify with the below patch as well?
Quoted 1 line
Also, is chaining already upstream so Linus should have this for 2.6.23?
No, it's for 2.6.24.
drivers/mmc/card/queue.c +3 -3
@@ -153,14 +153,14 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lockblk_queue_max_hw_segments (mq->queue, bouncesz /512 );blk_queue_max_segment_size (mq->queue, bouncesz); - mq->sg =kmalloc (sizeof (struct scatterlist ), + mq->sg =kzalloc (sizeof (struct scatterlist ),GFP_KERNEL );if (!mq->sg) { ret = -ENOMEM ; goto cleanup_queue; } - mq->bounce_sg =kmalloc (sizeof (struct scatterlist ) * + mq->bounce_sg =kzalloc (sizeof (struct scatterlist ) * bouncesz /512 ,GFP_KERNEL );if (!mq->bounce_sg) { ret = -ENOMEM ;
@@ -177,7 +177,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lockblk_queue_max_hw_segments (mq->queue, host->max_hw_segs);blk_queue_max_segment_size (mq->queue, host->max_seg_size); - mq->sg =kmalloc (sizeof (struct scatterlist ) * + mq->sg =kzalloc (sizeof (struct scatterlist ) * host->max_phys_segs,GFP_KERNEL );if (!mq->sg) { ret = -ENOMEM ;
Signature · 1 line
Jens Axboe
Pierre Ossman
Acked-bydrivers/mmc/card/queue.c
Quoted 5 lines · On Thu, 4 Oct 2007 18:42:25 +0200 Jens Axboe <[email protected]> wrote:
drivers/mmc/card/queue.c +0
-0
(Provided it works ;))
I have no patches touching queue.c in my tree, so there should be no problems with merge conflicts.
Rgds
Pierre
That patch boots without complaint as well.
BTW, the earlier failure messages did not make it into /var/log/messages, only the dmesg buffer. This is with standard Ubuntu Gutsy logging levels.
Quoted 57 lines · Jens Axboe
Quoted 7 lines · Pierre Ossman
Quoted 2 lines · On Thu, 04 Oct 2007 09:19:40 -0700 Don Mullis <[email protected]> wrote:
This patch fixes the boot.
Fantastic. Then will try to get this upstream then.
I already put it in the sgchain drivers part. If you could please ack it, that would be nice :-). I have a bunch of driver updates/work-arounds there.
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
It looks like missing init of the sg list in mmc, does this work?
Jens, is this zeroing needed for each invocation, or really just once to get the list in a known state?
Once should actually be enough, so you could move it to init as well. Don, care to verify with the below patch as well?
Quoted 1 line
Also, is chaining already upstream so Linus should have this for 2.6.23?
No, it's for 2.6.24.
drivers/mmc/card/queue.c +3
-3@@ -153,14 +153,14 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lockblk_queue_max_hw_segments (mq->queue, bouncesz /512 );blk_queue_max_segment_size (mq->queue, bouncesz); - mq->sg =kmalloc (sizeof (struct scatterlist ), + mq->sg =kzalloc (sizeof (struct scatterlist ),GFP_KERNEL );if (!mq->sg) { ret = -ENOMEM ; goto cleanup_queue; } - mq->bounce_sg =kmalloc (sizeof (struct scatterlist ) * + mq->bounce_sg =kzalloc (sizeof (struct scatterlist ) * bouncesz /512 ,GFP_KERNEL );if (!mq->bounce_sg) { ret = -ENOMEM ;@@ -177,7 +177,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lockblk_queue_max_hw_segments (mq->queue, host->max_hw_segs);blk_queue_max_segment_size (mq->queue, host->max_seg_size); - mq->sg =kmalloc (sizeof (struct scatterlist ) * + mq->sg =kzalloc (sizeof (struct scatterlist ) * host->max_phys_segs,GFP_KERNEL );if (!mq->sg) { ret = -ENOMEM ;
Quoted 5 lines · Don Mullis
That patch boots without complaint as well.
BTW, the earlier failure messages did not make it into
/var/log/messages, only the dmesg buffer. This is with standard Ubuntu Gutsy logging levels.
Super, thanks for retesting!
Signature · 1 line
Jens Axboe
Quoted 6 lines · On Wed, 3 Oct 2007 23:16:59 -0700 Andrew Morton <[email protected]>…
Quoted 4 lines · On Wed, 03 Oct 2007 23:11:02 -0700 Don Mullis <[email protected]> wrote:
OOPS followed by a 3 minute timeout, then completion of boot. Not seen if card (Kingston microSD adapter) is ejected; not seen in 2.6.23-rc8. Running on a Dell XPS M1330 laptop.
Impossible! My code is bug free!
Quoted 5 lines
Quoted 5 lines
[ 13.709831] EIP is at blk_rq_map_sg+0xc0/0x160 [ 13.711857] Call Trace: [ 13.711971] [<f8c39e58>] mmc_queue_map_sg+0x28/0xc0 [mmc_block] [ 13.712085] [<f8c396c9>] mmc_blk_issue_rq+0x199/0x780 [mmc_block] [ 13.712193] [<f8c3a168>] mmc_queue_thread+0x78/0xe0 [mmc_block]
Seems to be in the handling of the bounce buffer. I don't see how any of the parameters to blk_rq_map_sg() could be incorrect though, so I suspect the problem is not in the mmc layer.
Don, is MMC_BLOCK_BOUNCE enabled? Could you try toggling it and see if things change?
Quoted 3 lines
This could be due to git-block changes (or a lack of them ;))
There are no pending patches, or recent changes that mess about in any real way in there.
Don, when did this work last?
Rgds
Pierre