Skip to contentSkip to conversation

x86_64 EFI boot support: EFI frame buffer driver

PATCH RESEND In review Huang, Ying 1 participant 1 message Oct 24, 2007 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/2 x86_64 EFI boot support: EFI frame buffer driver

This patch adds Graphics Output Protocol support to the kernel. UEFI2.0 spec deprecates Universal Graphics Adapter (UGA) protocol and only Graphics Output Protocol (GOP) is produced. Therefore, the boot loader needs to query the UEFI firmware with appropriate Output Protocol and pass the video information to the kernel. As a result of GOP protocol, an EFI framebuffer driver is needed for displaying console messages. The patch adds a EFI framebuffer driver. The EFI frame buffer driver in this patch is based on the Intel Mac framebuffer driver.

The ELILO bootloader takes care of passing the video information as appropriate for EFI firmware.

The framebuffer driver has been tested in i386 kernel and x86_64 kernel on EFI platform.

---

 drivers/video/Kconfig       |   11 ++
 drivers/video/Makefile      |    1 
 drivers/video/efifb.c       |  232 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/screen_info.h |    1 
 4 files changed, 245 insertions(+)
include/linux/screen_info.h +1 -0
Index: linux-2.6.24-rc1/include/linux/screen_info.h
===================================================================
@@ -51,6 +51,7 @@
 #define VIDEO_TYPE_EGAC		0x21	/* EGA in Color Mode		*/
 #define VIDEO_TYPE_VGAC		0x22	/* VGA+ in Color Mode		*/
 #define VIDEO_TYPE_VLFB		0x23	/* VESA VGA in graphic mode	*/
+#define VIDEO_TYPE_EFI		0x24	/* EFI graphic mode		*/
 
 #define VIDEO_TYPE_PICA_S3	0x30	/* ACER PICA-61 local S3 video	*/
 #define VIDEO_TYPE_MIPS_G364	0x31    /* MIPS Magnum 4000 G364 video  */
drivers/video/Kconfig +11 -0
Index: linux-2.6.24-rc1/drivers/video/Kconfig
===================================================================
@@ -641,6 +641,17 @@
 	  You will get a boot time penguin logo at no additional cost. Please
 	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
 
+config FB_EFI
+	bool "EFI-based Framebuffer Support"
+	depends on (FB = y) && X86
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the EFI frame buffer device driver. If the firmware on
+	  your platform is UEFI2.0, select Y to add support for
+	  Graphics Output Protocol for early console messages to appear.
+
 config FB_IMAC
 	bool "Intel-based Macintosh Framebuffer Support"
 	depends on (FB = y) && X86 && EFI
drivers/video/Makefile +1 -0
Index: linux-2.6.24-rc1/drivers/video/Makefile
===================================================================
@@ -118,6 +118,7 @@
 obj-$(CONFIG_FB_UVESA)            += uvesafb.o
 obj-$(CONFIG_FB_VESA)             += vesafb.o
 obj-$(CONFIG_FB_IMAC)             += imacfb.o
+obj-$(CONFIG_FB_EFI)              += efifb.o
 obj-$(CONFIG_FB_VGA16)            += vga16fb.o
 obj-$(CONFIG_FB_OF)               += offb.o
 obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
drivers/video/efifb.c new file +232 -0

232 lines not on this page · raw message