Skip to contentSkip to conversation

SPI doesn't detect first dataflash (CS0) on a AT91rm9200ek with kernel 2.6.23.1

DISCUSSION Bruno Vétel 2 participants 2 messages Oct 25, 2007 – Nov 1, 2007

lore
Share & tools
lore
#0 lore raw

Hello

I want to use SPI on a at91rm9200ek. The SPI starts and the dataflash is probed but fails with error 255. I tried on another board very similar to at91rm9200ek but with 4 dataflashs (chip select 0 to 3). The flashs 1 2 3 are well detected but the 0 fails also with the same error code. Debug traces tells all transfers seems to be OK. The board with 4 dataflashs works well with a 2.6.17 + patch at91. I don't find any answers to my problem.

Could you help me ?

Thanks

Bruno

#1 lore raw
Quoted 1 line

Could you help me ?

Several people sent suggestions on this topic when you asked this question on linux-arm-kernel last week (which was BTW a far more appropriate list for this).

I notice you didn't follow up on those suggestions in any way. Before you ask again, it'd be polite to try following the suggestions you've already received.

- Dave