lpfc 8.2.3 : Temperature handling fix

diff -upNr a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
@@ -979,6 +979,12 @@ lpfc_soft_wwpn_store(struct class_device
 	unsigned int i, j, cnt=count;
 	u8 wwpn[8];
 
+	spin_lock_irq(&phba->hbalock);
+	if (phba->over_temp_state == HBA_OVER_TEMP) {
+		spin_unlock_irq(&phba->hbalock);
+		return -EPERM;
+	}
+	spin_unlock_irq(&phba->hbalock);
 	/* count may include a LF at end of string */
 	if (buf[cnt-1] == '\n')
 		cnt--;

@@ -1750,6 +1756,12 @@ sysfs_mbox_read(struct kobject *kobj, st
 
 	spin_lock_irq(&phba->hbalock);
 
+	if (phba->over_temp_state == HBA_OVER_TEMP) {
+		sysfs_mbox_idle(phba);
+		spin_unlock_irq(&phba->hbalock);
+		return  -EPERM;
+	}
+
 	if (off == 0 &&
 	    phba->sysfs_mbox.state  == SMBOX_WRITING &&
 	    phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) {

diff -upNr a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
@@ -386,6 +386,11 @@ struct hbq_s {
 #define LPFC_ELS_HBQ	0
 #define LPFC_EXTRA_HBQ	1
 
+enum hba_temp_state {
+	HBA_NORMAL_TEMP,
+	HBA_OVER_TEMP
+};
+
 struct lpfc_hba {
 	struct lpfc_sli sli;
 	uint32_t sli_rev;		/* SLI2 or SLI3 */

@@ -589,6 +594,7 @@ struct lpfc_hba {
 	 */
 #define QUE_BUFTAG_BIT  (1<<31)
 	uint32_t buffer_tag_count;
+	enum hba_temp_state over_temp_state;
 };
 
 static inline struct Scsi_Host *

diff -upNr a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
@@ -246,6 +246,15 @@ lpfc_config_port_post(struct lpfc_hba *p
 	int i, j;
 	int rc;
 
+	spin_lock_irq(&phba->hbalock);
+	/*
+	 * If the Config port completed correctly the HBA is not
+	 * over heated any more.
+	 */
+	if (phba->over_temp_state == HBA_OVER_TEMP)
+		phba->over_temp_state = HBA_NORMAL_TEMP;
+	spin_unlock_irq(&phba->hbalock);
+
 	pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!pmb) {
 		phba->link_state = LPFC_HBA_ERROR;

@@ -703,7 +712,10 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
 					  SCSI_NL_VID_TYPE_PCI
 					  | PCI_VENDOR_ID_EMULEX);
 
+		spin_lock_irq(&phba->hbalock);
 		psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+		phba->over_temp_state = HBA_OVER_TEMP;
+		spin_unlock_irq(&phba->hbalock);
 		lpfc_offline_prep(phba);
 		lpfc_offline(phba);
 		lpfc_unblock_mgmt_io(phba);