Skip to contentSkip to conversation

Blackfin arch bug fixing

GIT PULL Bryan Wu 1 participant 1 message Oct 30, 2007

lore
Share & tools
lore

Bryan Wu

author
#0 lore raw

Hi Linus,

Please pull from 'for-linus' branch of

master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6.git for-linus

to receive the following updates:

 arch/blackfin/Kconfig                           |   15 +-
 arch/blackfin/configs/BF527-EZKIT_defconfig     |    2 +-
 arch/blackfin/configs/BF533-EZKIT_defconfig     |    2 +-
 arch/blackfin/configs/BF533-STAMP_defconfig     |    2 +-
 arch/blackfin/configs/BF537-STAMP_defconfig     |    2 +-
 arch/blackfin/configs/BF548-EZKIT_defconfig     |  279 ++++++++++++++++---
 arch/blackfin/configs/BF561-EZKIT_defconfig     |    2 +-
 arch/blackfin/configs/PNAV-10_defconfig         |    2 +-
 arch/blackfin/kernel/entry.S                    |    6 +-
 arch/blackfin/kernel/fixed_code.S               |   14 +
 arch/blackfin/kernel/gptimers.c                 |   47 +++-
 arch/blackfin/kernel/setup.c                    |   13 +-
 arch/blackfin/kernel/traps.c                    |  340 +++++++++++++----------
 arch/blackfin/kernel/vmlinux.lds.S              |   11 +-
 arch/blackfin/mach-bf527/boards/ezkit.c         |   53 ++++
 arch/blackfin/mach-bf533/boards/H8606.c         |  345 +++++++++++++++++++++++
 arch/blackfin/mach-bf533/boards/Makefile        |    1 +
 arch/blackfin/mach-bf533/boards/cm_bf533.c      |   42 +++-
 arch/blackfin/mach-bf533/boards/stamp.c         |    4 +-
 arch/blackfin/mach-bf537/boards/cm_bf537.c      |    4 +-
 arch/blackfin/mach-bf537/boards/stamp.c         |    6 +-
 arch/blackfin/mach-common/entry.S               |    2 +-
 include/asm-blackfin/bfin-global.h              |    1 +
 include/asm-blackfin/fixed_code.h               |    4 +-
 include/asm-blackfin/gptimers.h                 |    2 +
 include/asm-blackfin/mach-bf527/defBF52x_base.h |   86 +++---
 include/asm-blackfin/mach-bf527/dma.h           |    7 +-
 include/asm-blackfin/mach-bf548/defBF549.h      |    2 +-
 include/asm-blackfin/mach-bf548/defBF54x_base.h |    7 +
 include/asm-blackfin/mach-bf548/portmux.h       |   14 +
 include/asm-blackfin/mach-bf561/defBF561.h      |    3 +
 31 files changed, 1052 insertions(+), 268 deletions(-)
 create mode 100644 arch/blackfin/mach-bf533/boards/H8606.c

Bryan Wu (1):
Blackfin arch: update board defconfig files according to latest information from ADI datasheet

Javier Herrero (1):
Blackfin arch: Added support for HV Sistemas H8606 board

Michael Hennerich (4):
Blackfin arch: add NFC driver support in BF527-EZKIT board
Blackfin arch: fix bug BlueTechnix CM-BF537 board config uses wrong IRQ for net2272 driver Blackfin arch: Apply Bluetchnix vendor patch provided by Harald Krapfenbauer Blackfin arch: Do not pollute name space used in linux-2.6.x/sound

Mike Frysinger (5):
Blackfin arch: add support for checking/clearing overruns in generic purpose Timer API Blackfin arch: fix libata data struct member from irq_type to irq_flags Blackfin arch: reclaim a few bytes from the end of our init section Blackfin arch: Add missing definitions for BF561
Blackfin arch: use a less common define name in BF549

Robin Getz (6):
Blackfin arch: fix bug: kernel prints out error message twice
Blackfin arch: cleanup arch/blackfin/kernel/traps.c handling code.
Blackfin arch: fix bug: tell users if the kernel is recovering from a fault condition Blackfin arch: Fix random crash issue found by Michael.
Blackfin arch: Add missing definitions of BF54x
Blackfin arch: ensure that speculative loads of bad pointers don't cause us to do bad things.

Sonic Zhang (1):
Blackfin arch: Fix bug set correct baud for spi mmc and enable SPI after DMA.

arch/blackfin/Kconfig +13 -2
index 7888551..9f9de3e 100644
@@ -295,6 +295,12 @@ config PNAV10
 	help
 	  PNAV 1.0 board Support.
 
+config H8606_HVSISTEMAS
+        bool "HV Sistemas H8606"
+        depends on (BF532)
+        help
+          HV Sistemas H8606 board support.
+
 config GENERIC_BOARD
 	bool "Custom"
 	depends on (BF537 || BF536 \
@@ -317,7 +323,8 @@ config MEM_MT48LC64M4A2FB_7E
 config MEM_MT48LC16M16A2TG_75
 	bool
 	depends on (BFIN533_EZKIT || BFIN561_EZKIT \
-		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM)
+		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
+		|| H8606_HVSISTEMAS)
 	default y
 
 config MEM_MT48LC32M8A2_75
@@ -366,7 +373,7 @@ config CLKIN_HZ
 	int "Crystal Frequency in Hz"
 	default "11059200" if BFIN533_STAMP
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT)
+	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS)
 	default "30000000" if BFIN561_EZKIT
 	default "24576000" if PNAV10
 	help
@@ -404,6 +411,7 @@ config VCO_MULT
 	default "20" if BFIN537_BLUETECHNIX_CM
 	default "20" if BFIN561_BLUETECHNIX_CM
 	default "20" if BFIN561_EZKIT
+	default "16" if H8606_HVSISTEMAS
 	help
 	  This controls the frequency of the on-chip PLL. This can be between 1 and 64.
 	  PLL Frequency = (Crystal Frequency) * (this setting)
@@ -440,6 +448,7 @@ config SCLK_DIV
 	default 4 if BFIN537_BLUETECHNIX_CM
 	default 4 if BFIN561_BLUETECHNIX_CM
 	default 5 if BFIN561_EZKIT
+	default 3 if H8606_HVSISTEMAS
 	help
 	  This sets the frequency of the system clock (including SDRAM or DDR).
 	  This can be between 1 and 15
@@ -492,11 +501,13 @@ config MEM_SIZE
 	default  64 if BFIN561_EZKIT
 	default 128 if BFIN533_STAMP
 	default  64 if PNAV10
+	default  32 if H8606_HVSISTEMAS
 
 config MEM_ADD_WIDTH
 	int "SDRAM Memory Address Width"
 	default  9 if BFIN533_EZKIT
 	default  9 if BFIN561_EZKIT
+	default  9 if H8606_HVSISTEMAS
 	default 10 if BFIN527_EZKIT
 	default 10 if BFIN537_STAMP
 	default 11 if BFIN533_STAMP
arch/blackfin/configs/BF527-EZKIT_defconfig +1 -1
index df974e7..1f6a93d 100644
@@ -244,7 +244,7 @@ CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
arch/blackfin/configs/BF533-EZKIT_defconfig +1 -1
index 57f58d5..9e9b420 100644
@@ -198,7 +198,7 @@ CONFIG_CLKIN_HZ=27000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
arch/blackfin/configs/BF533-STAMP_defconfig +1 -1
index 306302b..f59ade9 100644
@@ -199,7 +199,7 @@ CONFIG_CLKIN_HZ=11059200
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
arch/blackfin/configs/BF537-STAMP_defconfig +1 -1
index 828b604..07eb63d 100644
@@ -206,7 +206,7 @@ CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
arch/blackfin/configs/BF548-EZKIT_defconfig +236 -43

428 lines not on this page · raw message

arch/blackfin/configs/BF561-EZKIT_defconfig +1 -1
index 85e647f..277d72d 100644
@@ -243,7 +243,7 @@ CONFIG_CLKIN_HZ=30000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
arch/blackfin/configs/PNAV-10_defconfig +1 -1
index 15e36aa..3d403e0 100644
@@ -204,7 +204,7 @@ CONFIG_CLKIN_HZ=24576000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
-CONFIG_MAX_SCLK_HZ=133000000
+CONFIG_MAX_SCLK_HZ=133333333
 CONFIG_MIN_SCLK_HZ=27000000
 
 #
arch/blackfin/kernel/entry.S +4 -2
index 65c5ba4..65f4e67 100644
@@ -54,9 +54,11 @@ ENTRY(_ret_from_fork)
 	[sp + PT_IPEND] = r0;
 	/* do a 'fake' RTI by jumping to [RETI]
 	 * to avoid clearing supervisor mode in child
-	*/
+	 */
+	r0 = [sp + PT_PC];
+	[sp + PT_P0] = r0;
+
 	RESTORE_ALL_SYS
-	p0 = reti;
 	jump (p0);
 ENDPROC(_ret_from_fork)
 
arch/blackfin/kernel/fixed_code.S +14 -0
index d8b1ebc..9026269 100644
@@ -129,4 +129,18 @@ ENTRY(_atomic_xor32)
 	rts;
 ENDPROC (_atomic_ior32)
 
+.align 16
+	/*
+	 * safe_user_instruction
+	 * Four NOPS are enough to allow the pipeline to speculativily load
+	 * execute anything it wants. After that, things have gone bad, and
+	 * we are stuck - so panic. Since we might be in user space, we can't
+	 * call panic, so just cause a unhandled exception, this should cause
+	 * a dump of the trace buffer so we can tell were we are, and a reboot
+	 */
+ENTRY(_safe_user_instruction)
+	NOP; NOP; NOP; NOP;
+	EXCPT 0x4;
+ENDPROC(_safe_user_instruction)
+
 ENTRY(_fixed_code_end)
arch/blackfin/kernel/gptimers.c +40 -7

86 lines not on this page · raw message

arch/blackfin/kernel/setup.c +11 -2
index f1b059e..934234f 100644
@@ -316,6 +316,15 @@ void __init setup_arch(char **cmdline_p)
 
 	init_leds();
 
+	_bfin_swrst = bfin_read_SWRST();
+
+	if (_bfin_swrst & RESET_DOUBLE)
+		printk(KERN_INFO "Recovering from Double Fault event\n");
+	else if (_bfin_swrst & RESET_WDOG)
+		printk(KERN_INFO "Recovering from Watchdog event\n");
+	else if (_bfin_swrst & RESET_SOFTWARE)
+		printk(KERN_NOTICE "Reset caused by Software reset\n");
+
 	printk(KERN_INFO "Blackfin support (C) 2004-2007 Analog Devices, Inc.\n");
 	if (bfin_compiled_revid() == 0xffff)
 		printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU);
@@ -402,8 +411,6 @@ void __init setup_arch(char **cmdline_p)
 	if (l1_length > L1_DATA_A_LENGTH)
 		panic("L1 data memory overflow\n");
 
-	_bfin_swrst = bfin_read_SWRST();
-
 	/* Copy atomic sequences to their fixed location, and sanity check that
 	   these locations are the ones that we advertise to userspace.  */
 	memcpy((void *)FIXED_CODE_START, &fixed_code_start,
@@ -424,6 +431,8 @@ void __init setup_arch(char **cmdline_p)
 	       != ATOMIC_AND32 - FIXED_CODE_START);
 	BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
 	       != ATOMIC_XOR32 - FIXED_CODE_START);
+	BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start
+		!= SAFE_USER_INSTRUCTION - FIXED_CODE_START);
 
 	init_exception_vectors();
 	bf53x_cache_init();
arch/blackfin/kernel/traps.c +193 -147

615 lines not on this page · raw message

arch/blackfin/kernel/vmlinux.lds.S +8 -3
index eec4367..9b75bc8 100644
@@ -172,9 +172,14 @@ SECTIONS
 		__ebss_b_l1 = .;
 	}
 
-	___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
-
-	.bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) :
+	/* Force trailing alignment of our init section so that when we
+	 * free our init memory, we don't leave behind a partial page.
+	 */
+	. = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
+	. = ALIGN(PAGE_SIZE);
+	___init_end = .;
+
+	.bss :
 	{
 		. = ALIGN(4);
 		___bss_start = .;
arch/blackfin/mach-bf527/boards/ezkit.c +53 -0

74 lines not on this page · raw message

arch/blackfin/mach-bf533/boards/H8606.c new file +345 -0

346 lines not on this page · raw message

arch/blackfin/mach-bf533/boards/Makefile +1 -0
index 12a631a..2452b45 100644
@@ -6,3 +6,4 @@ obj-$(CONFIG_GENERIC_BOARD)            += generic_board.o
 obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN533_BLUETECHNIX_CM)   += cm_bf533.o
+obj-$(CONFIG_H8606_HVSISTEMAS)         += H8606.o
arch/blackfin/mach-bf533/boards/cm_bf533.c +40 -2

85 lines not on this page · raw message

arch/blackfin/mach-bf533/boards/stamp.c +2 -2
index f84be4e..62ffa50 100644
@@ -218,7 +218,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 	{
 		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = 0,
 		.platform_data = NULL,
@@ -227,7 +227,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 	{
 		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
 		.platform_data = NULL,
arch/blackfin/mach-bf537/boards/cm_bf537.c +2 -2
index 52e2320..2915931 100644
@@ -281,8 +281,8 @@ static struct resource net2272_bfin_resources[] = {
 		.end = 0x20200000 + 0x100,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
+		.start = IRQ_PH14,
+		.end = IRQ_PH14,
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 	},
 };
arch/blackfin/mach-bf537/boards/stamp.c +3 -3
index cc41f6c..5f7b91f 100644
@@ -450,7 +450,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
 	{
 		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = 0,
 		.platform_data = NULL,
@@ -459,7 +459,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	},
 	{
 		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
 		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
 		.platform_data = NULL,
@@ -612,7 +612,7 @@ static struct platform_device bfin_sport1_uart_device = {
 
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+	.irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
 };
 
 static struct resource bfin_pata_resources[] = {
arch/blackfin/mach-common/entry.S +1 -1
index e3ad580..1b13fa4 100644
@@ -917,7 +917,7 @@ ENTRY(_ex_table)
 	.long _ex_soft_bp       /* 0x01 - User Defined - Software breakpoint */
 	.long _ex_replaceable   /* 0x02 - User Defined */
 	.long _ex_trap_c        /* 0x03 - User Defined - userspace stack overflow */
-	.long _ex_replaceable   /* 0x04 - User Defined */
+	.long _ex_trap_c        /* 0x04 - User Defined - dump trace buffer */
 	.long _ex_replaceable   /* 0x05 - User Defined */
 	.long _ex_replaceable   /* 0x06 - User Defined */
 	.long _ex_replaceable   /* 0x07 - User Defined */
include/asm-blackfin/bfin-global.h +1 -0
index 14cb8d3..0212e18 100644
@@ -80,6 +80,7 @@ extern int atomic_sub32(void);
 extern int atomic_ior32(void);
 extern int atomic_and32(void);
 extern int atomic_xor32(void);
+extern void safe_user_instruction(void);
 extern void sigreturn_stub(void);
 
 extern void *l1_data_A_sram_alloc(size_t);
include/asm-blackfin/fixed_code.h +3 -1
index e6df84e..37db66c 100644
@@ -17,4 +17,6 @@
 
 #define ATOMIC_SEQS_END		0x480
 
-#define FIXED_CODE_END		0x480
+#define SAFE_USER_INSTRUCTION   0x480
+
+#define FIXED_CODE_END		0x490
include/asm-blackfin/gptimers.h +2 -0
index c97ab03..8265ea4 100644
@@ -197,6 +197,8 @@ uint32_t get_gptimer_period    (int timer_id);
 uint32_t get_gptimer_count     (int timer_id);
 uint16_t get_gptimer_intr      (int timer_id);
 void     clear_gptimer_intr    (int timer_id);
+uint16_t get_gptimer_over      (int timer_id);
+void     clear_gptimer_over    (int timer_id);
 void     set_gptimer_config    (int timer_id, uint16_t config);
 uint16_t get_gptimer_config    (int timer_id);
 void     set_gptimer_pulse_hi  (int timer_id);
include/asm-blackfin/mach-bf527/defBF52x_base.h +43 -43

98 lines not on this page · raw message

include/asm-blackfin/mach-bf527/dma.h +6 -1
index a41627a..2dfee12 100644
@@ -35,7 +35,6 @@
 #define MAX_BLACKFIN_DMA_CHANNEL 16
 
 #define CH_PPI 			0	/* PPI receive/transmit or NFC */
-#define CH_NFC			0	/* PPI receive/transmit or NFC */
 #define CH_EMAC_RX 		1	/* Ethernet MAC receive or HOSTDP */
 #define CH_EMAC_HOSTDP 		1	/* Ethernet MAC receive or HOSTDP */
 #define CH_EMAC_TX 		2	/* Ethernet MAC transmit or NFC */
@@ -54,6 +53,12 @@
 #define CH_MEM_STREAM1_DEST	14	/* TX */
 #define CH_MEM_STREAM1_SRC 	15	/* RX */
 
+#if defined(CONFIG_BF527_NAND_D_PORTF)
+#define CH_NFC			CH_PPI	/* PPI receive/transmit or NFC */
+#elif defined(CONFIG_BF527_NAND_D_PORTH)
+#define CH_NFC			CH_EMAC_TX /* PPI receive/transmit or NFC */
+#endif
+
 extern int channel2irq(unsigned int channel);
 extern struct dma_register *base_addr[];
 
include/asm-blackfin/mach-bf548/defBF549.h +1 -1
index 4e46d65..fcb72b4 100644
@@ -1671,7 +1671,7 @@
 /* Bit masks for MXVR_DMAx_CONFIG */
 
 #define                    MDMAEN  0x1        /* DMA Channel Enable */
-#define                        DD  0x2        /* DMA Channel Direction */
+#define                     DMADD  0x2        /* DMA Channel Direction */
 #define                 BY4SWAPEN  0x20       /* DMA Channel Four Byte Swap Enable */
 #define                     LCHAN  0x3c0      /* DMA Channel Logical Channel */
 #define                 BITSWAPEN  0x400      /* DMA Channel Bit Swap Enable */
include/asm-blackfin/mach-bf548/defBF54x_base.h +7 -0
index 1d365c8..da979cb 100644
@@ -2252,6 +2252,13 @@
 #define                   PLL_OFF  0x2        /* Disable PLL */
 #define                        DF  0x1        /* Divide Frequency */
 
+/* SWRST Masks */
+#define              SYSTEM_RESET 0x0007       /* Initiates A System Software Reset */
+#define              DOUBLE_FAULT 0x0008       /* Core Double Fault Causes Reset */
+#define              RESET_DOUBLE 0x2000       /* SW Reset Generated By Core Double-Fault */
+#define                RESET_WDOG 0x4000       /* SW Reset Generated By Watchdog Timer */
+#define            RESET_SOFTWARE 0x8000       /* SW Reset Occurred Since Last Read Of SWRST */
+
 /* Bit masks for PLL_STAT */
 
 #define                PLL_LOCKED  0x20       /* PLL Locked Status */
include/asm-blackfin/mach-bf548/portmux.h +14 -0
index b382deb..6b48512 100644
@@ -267,4 +267,18 @@
 #define P_AMC_BG	(P_DEFINED | P_IDENT(GPIO_PJ12) | P_FUNCT(0))
 #define P_AMC_BGH	(P_DEFINED | P_IDENT(GPIO_PJ13) | P_FUNCT(0))
 
+
+#define P_NAND_D0	(P_DONTCARE)
+#define P_NAND_D1	(P_DONTCARE)
+#define P_NAND_D2	(P_DONTCARE)
+#define P_NAND_D3	(P_DONTCARE)
+#define P_NAND_D4	(P_DONTCARE)
+#define P_NAND_D5	(P_DONTCARE)
+#define P_NAND_D6	(P_DONTCARE)
+#define P_NAND_D7	(P_DONTCARE)
+#define P_NAND_WE	(P_DONTCARE)
+#define P_NAND_RE	(P_DONTCARE)
+#define P_NAND_CLE	(P_DONTCARE)
+#define P_NAND_ALE	(P_DONTCARE)
+
 #endif /* _MACH_PORTMUX_H_ */
include/asm-blackfin/mach-bf561/defBF561.h +3 -0
index bf7dc4e..7945e8a 100644
@@ -55,6 +55,9 @@
 /* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
 #define SWRST                   SICA_SWRST
 #define SYSCR                   SICA_SYSCR
+#define RESET_DOUBLE            (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A)
+#define RESET_WDOG              (SWRST_WDT_B|SWRST_WDT_A)
+#define RESET_SOFTWARE          (SWRST_OCCURRED)
 
 /* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
 #define SICA_SWRST              0xFFC00100	/* Software Reset register */