RFCOMM connection to a cell phone

I am interested in tinkering with my bluetooth devices. I have been reading the specs for the different profiles. It is my understanding that I should be able to make an rfcomm connection to my cellphone and issue AT commands.

The first time the connect command is issued, the phone and computer prompt for the key, and they both report that they paired successfully.

However, when using the command "rfcomm connect 0 00:1C:62:3A:7D:69 1" I get "Can't connect RFCOMM socket: Connection refused".

HCIDump:Results of "sudo hcidump -a"

HCI sniffer - Bluetooth packet analyzer ver 1.39
device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13
i } : b . . . . . . . . .

. . . .

. i } : b . . .

i } : b . .
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
i } : b . . . . . . . . H . F . O ` . .
. .

. . . . i } : b . .

. . . i } : b . . . .
< ACL data: handle 11 flags 0x02 dlen 12

    L2CAP(s): Connect req: psm 3 scid 0x0040

< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
. .

. . . .
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
. . . .

. . . . . . . . . . .

. . . . . .
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
i } : b . . . . . .

. . .

. . . .

    L2CAP(s): Connect rsp: dcid 0x015c scid 0x0040 result 0 status 0
      Connection successful
< ACL data: handle 11 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x015c flags 0x00 clen 4
      MTU 1013 

. i } : b . . T i m s L G V X 8 3 0
0 . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .

    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success

    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
< ACL data: handle 11 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x015c flags 0x00 result 0 clen 4
      Success
      MTU 672 
< ACL data: handle 11 flags 0x02 dlen 8
    L2CAP(d): cid 0x015c len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c 

. . . . .

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7 

< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(d): cid 0x015c len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8 dlci 2 frame_type 0 credit_flow 15 pri 7 ack_timer 0 frame_size 667 max_retrans 0 credits 7

L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8 dlci 2 frame_type 0 credit_flow 14 pri 7 ack_timer 0 frame_size 666 max_retrans 0 credits 3
< ACL data: handle 11 flags 0x02 dlen 8

    L2CAP(d): cid 0x015c len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59 

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73 
< ACL data: handle 11 flags 0x02 dlen 8
    L2CAP(d): cid 0x015c len 4 [psm 3]
      RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd 
< ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Disconn req: dcid 0x015c scid 0x0040

. . . . .

    L2CAP(d): cid 0x0040 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7 

    L2CAP(s): Disconn rsp: dcid 0x015c scid 0x0040

< HCI Command: Disconnect (0x01|0x0006) plen 3
. . .

. . . .

. . . .

Any help or suggestions are appreciated!

Thanks!

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users