Skip to contentSkip to conversation

LVM2 tools lvmcmdline.c major and minor number limits

linux-lvm Darren Lavender 2 participants 4 messages Feb 13, 2008

lore
Share & tools
lore
#0 lore raw

I was wondering whether there was any particular reason why the limitations below are still present given that these were changed between 2.4 and 2.6 linux kernels?

Eg:

LVM2/tools/lvmcmdline.c

int minor_arg(struct cmd_context *cmd __attribute((unused)), struct arg *a)

{
        char *ptr;

        if (!_get_int_arg(a, &ptr) || (*ptr) || (a->sign == SIGN_MINUS))
                return 0;

        if (a->i_value > 255) {
                log_error("Minor number outside range 0-255");
                return 0;
        }

        return 1;
}

int major_arg(struct cmd_context *cmd __attribute((unused)), struct arg *a)

{
        char *ptr;

        if (!_get_int_arg(a, &ptr) || (*ptr) || (a->sign == SIGN_MINUS))
                return 0;

        if (a->i_value > 255) {
                log_error("Major number outside range 0-255");
                return 0;
        }

        /* FIXME Also Check against /proc/devices */

        return 1;
}

Linux 2.4 kernel appears to have a major number of 8 bits, likewise for the minor number.

By comparison, 2.6 appears to have 12 bits for the major and 20 bits for the minor, significantly larger, eg:

4 #define MINORBITS 20
5 #define MINORMASK ((1U << MINORBITS) - 1)
6

  7 #define MAJOR(dev)      ((unsigned int) ((dev) >> MINORBITS))
  8 #define MINOR(dev)      ((unsigned int) ((dev) & MINORMASK))
  9 #define MKDEV(ma,mi)    (((ma) << MINORBITS) | (mi))

Whilst these LVM2 hardcoded limits do not prevent device nodes being created during normal operation they do prevent the user from specifying specific major/minor numbers via the cmdline, eg:

 # lvcreate -n bigminor -l 5 -M y --major 253 --minor 270 vgtest
  Minor number outside range 0-255
  Invalid argument 270
  Error during parsing of command line.

Rebuilding without these limits (a quick hack/test) produces a device node that seems to work just fine:

# ./lvm lvcreate -n highminor -l 5 -M y --major 253 --minor 260 vgtest
  Logical volume "highminor" created
# ll /dev/mapper/
total 128
drwxr-xr-x   2 root root     4096 Feb 12 16:29 .
drwxr-xr-x  35 root root   122880 Feb 12 16:29 ..
lrwxrwxrwx   1 root root       16 Feb 12 15:52 control -> ../device-mapper
brw-------   1 root root 253, 260 Feb 12 16:29 vgtest-highminor
brw-------   1 root root 253, 250 Feb 12 16:04 vgtest-lowminor
brw-------   1 root root 253,   0 Feb 12 16:04 vgtest-nominor

Can this limitation be either removed or updated to bring it in line with more recent kernel functionality? Or is there some reason that I am missing for their continued existence/assigned values.....

Thanks & regards

Signature · 1 line
Darren Lavender <[email protected]>
#1 lore raw
Quoted 3 lines · Darren Lavender

I was wondering whether there was any particular reason why the limitations below are still present given that these were changed between 2.4 and 2.6 linux kernels?

Yes, it's probably time we changed that - nobody's noticed it before. We just have to check the code copes OK if someone sets it to a large number then reboots with a kernel that doesn't support it.

Setting the major number at device creation time is *still* not supported in 2.6. (2.4 does support it.)

Alasdair

Signature · 1 line
[email protected]
#2 lore raw

Hi Alasdair

Quoted 8 lines · Darren Lavender
Quoted 3 lines

I was wondering whether there was any particular reason why the limitations below are still present given that these were changed between 2.4 and 2.6 linux kernels?

Yes, it's probably time we changed that - nobody's noticed it before. We just have to check the code copes OK if someone sets it to a large number then reboots with a kernel that doesn't support it.

Sure.

Quoted 2 lines

Setting the major number at device creation time is *still* not supported in 2.6. (2.4 does support it.)

I think the interest is _only_ in the minor number but I noticed that I had to specify --major at the command line or I received an error:

# lvcreate -n bigminor -l 5 -M y  --minor 70 vgtest
  Please specify major number with --major when using -My
  lvcreate: Create a logical volume

Without the -M I get a different error:

# lvcreate -n new -l 5  --minor 72 vgtest
  Couldn't read major number for logical volume bigminor.
  Couldn't read major number for logical volume bigminor.
  Couldn't read major number for logical volume bigminor.
  Couldn't read major number for logical volume new.
  Couldn't read major number for logical volume bigminor.
  Couldn't read major number for logical volume new.
  Missing major number for persistent device
  Couldn't create ioctl argument
  Couldn't load device 'vgtest-new'.
  Perhaps the persistent device number -1:72 is already in use?
  Failed to activate new LV.

Hence the reason I just provided the DM major number in my original example.

The man pages seem not to mention --major but it does show in the usage:

lvcreate

        [-A|--autobackup {y|n}]
        [--addtag Tag]
        [--alloc AllocationPolicy]
        [-C|--contiguous {y|n}]
        [-d|--debug]
        [-h|-?|--help]
        [-i|--stripes Stripes [-I|--stripesize StripeSize]]
        {-l|--extents LogicalExtentsNumber |
         -L|--size LogicalVolumeSize[kKmMgGtT]}
        [-M|--persistent {y|n}] [--major major] [--minor minor]

....... ^^^^^^^^^^^^^

So perhaps this whole area needs a little bit of an overhaul...???

Tested on SLES9SP3 with:

2.6.5-7.308-bigsmp #1 SMP Mon Dec 10 11:36:40 UTC 2007 i686 i686 i386 GNU/Linux

rpm -q lvm2:
lvm2-2.01.14-3.23

Regards

Signature · 1 line
Darren Lavender 
#3 lore raw
Quoted 2 lines · Darren Lavender

I think the interest is _only_ in the minor number but I noticed that I had to specify --major at the command line or I received an error:

The validation probably broke at some stage. One day someone might port the multiple major number support from 2.4 to 2.6, but there doesn't seem to be any demand for it.

Alasdair

Signature · 1 line
[email protected]