eicon: fix sparse integer as NULL pointer warnings
PATCH 1/1 eicon: fix sparse integer as NULL pointer warnings
drivers/isdn/hardware/eicon/message.c:745:47: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:761:45: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:9122:16: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:9147:16: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/message.c:9173:14: warning: Using plain integer as NULL pointer drivers/isdn/hardware/eicon/divasmain.c:396:23: warning: Using plain integer as NULL pointer
Signed-off-by Harvey Harrison <[email protected]>
--- drivers/isdn/hardware/eicon/divasmain.c | 2 +- drivers/isdn/hardware/eicon/message.c | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-)
drivers/isdn/hardware/eicon/divasmain.c +1 -1
@@ -393,7 +393,7 @@ void diva_free_dma_map(void *hdev, struct _diva_dma_map_entry *pmap)dma_addr_t dma_handle;void *addr_handle; -for (i =0 ; (pmap !=0 ); i++) { +for (i =0 ; (pmap !=NULL ); i++) {diva_get_dma_map_entry (pmap, i, &cpu_addr, &phys_addr);if (!cpu_addr) {break ;
drivers/isdn/hardware/eicon/message.c +6 -6
@@ -742,7 +742,7 @@ static void start_internal_command (dword Id, PLCI *plci, t_std_internal_commaelse { i =1 ; -while (plci->internal_command_queue[i] !=0 ) +while (plci->internal_command_queue[i] !=NULL ) i++; plci->internal_command_queue[i] = command_function; }
@@ -758,7 +758,7 @@ static void next_internal_command (dword Id, PLCI *plci) plci->internal_command =0 ; plci->internal_command_queue[0 ] =NULL ; -while (plci->internal_command_queue[1 ] !=0 ) +while (plci->internal_command_queue[1 ] !=NULL ) {for (i =0 ; i <MAX_INTERNAL_COMMAND_LEVELS -1 ; i++) plci->internal_command_queue[i] = plci->internal_command_queue[i+1 ];
@@ -9119,7 +9119,7 @@ word AdvCodecSupport(DIVA_CAPI_ADAPTER *a, PLCI *plci, APPL *appl, byte hodbug (1 ,dprintf ("AdvSigPlci=0x%x" ,a->AdvSignalPLCI));return 0x2001 ;/* codec in use by another application */ } -if (plci!=0 ) +if (plci!=NULL ) { a->AdvSignalPLCI = plci; plci->tel=ADV_VOICE ;
@@ -9144,7 +9144,7 @@ word AdvCodecSupport(DIVA_CAPI_ADAPTER *a, PLCI *plci, APPL *appl, byte ho }/* indicate D-ch connect if */ }/* codec is connected OK */ -if (plci!=0 ) +if (plci!=NULL ) { a->AdvSignalPLCI = plci; plci->tel=ADV_VOICE ;
@@ -9170,7 +9170,7 @@ word AdvCodecSupport(DIVA_CAPI_ADAPTER *a, PLCI *plci, APPL *appl, byte ho {if (hook_listen)return 0x300B ;/* Facility not supported */ /* no hook with SCOM */ -if (plci!=0 ) plci->tel =CODEC ; +if (plci!=NULL ) plci->tel =CODEC ;dbug (1 ,dprintf ("S/SCOM codec" ));/* first time we use the scom-s codec we must shut down the internal */ /* handset application of the card. This can be done by an assign with */
@@ -14604,7 +14604,7 @@ static void channel_xmit_extended_xon (PLCI * plci) {int max_ch =ARRAY_SIZE (a->ch_flow_control);int i, one_requested =0 ; -if ((!plci) || (!plci->Id) || ((a = plci->adapter) ==0 )) { +if ((!plci) || (!plci->Id) || ((a = plci->adapter) ==NULL )) {return ; }
Signature · 1 line
1.5.4.2.200.g99e75