Telnet on ML410
Hi
Im trying to get telnetd from busybox to work on my ML410. Im running the telnetd in the init.d but when I connect to the ML410 with telnet I just get a blank screen without any prompt or login. Any thoughts. Here is my inittab file if that will help, I think it has to do with how my console is setup since Im using the uartlite. Im new to this so any help would be great.
::sysinit:/etc/init.d/rcS
# TERMINALS
#::askfirst:/bin/login
::askfirst:/sbin/getty -L 9600 ttyUL0
# What to do at the "Three Finger Salute"
# NOTE: This will not work over a serial port!
:12345:ctrlaltdel:/sbin/reboot
# What to do at shutdown/reboot
:6:shutdown:/bin/umount -a -r
:6:shutdown:/sbin/swapoff -a
# Stuff to do when restarting the init process
::restart:/sbin/init
Signature · 2 lines
View this message in context: http://www.nabble.com/Telnet-on-ML410-tf4231739.html#a12039337 Sent from the linuxppc-embedded mailing list archive at Nabble.com.
Figured it out I needed to make device nodes
cd /dev
mknod ptmx c 5 2
cd /dev/pts
mknod 0 c 136 0
Signature · 2 lines
View this message in context: http://www.nabble.com/Telnet-on-ML410-tf4231739.html#a12041502 Sent from the linuxppc-embedded mailing list archive at Nabble.com.