ide-cd: trivial fixes
PATCH 5/5 ide-cd: fix remaining checkpatch.pl issues
In reply to Borislav PetkovSome of them are:
WARNING: braces {} are not necessary for single statement blocks
CHECK: multiple assignments should be avoided
WARNING: printk() should include KERN_ facility level
WARNING: no space between function name and open parenthesis '('
--- drivers/ide/ide-cd.c | 46 ++++++++++++++++++++++------------------------ 1 files changed, 22 insertions(+), 24 deletions(-)
drivers/ide/ide-cd.c +22 -24
@@ -136,8 +136,7 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,return log; } -static -void cdrom_analyze_sense_data (ide_drive_t *drive, +static void cdrom_analyze_sense_data (ide_drive_t *drive,struct request *failed_command,struct request_sense *sense) {
@@ -186,9 +185,9 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,if (valid <0 ) valid =0 ;if (sector <get_capacity (info->disk) && - drive->probed_capacity - sector <4 *75 ) { + drive->probed_capacity - sector <4 *75 ) +set_capacity (info->disk, sector); - } } }
@@ -219,7 +218,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, rq->data = sense; rq->cmd[0 ] =GPCMD_REQUEST_SENSE ; - rq->cmd[4 ] = rq->data_len =18 ; + rq->cmd[4 ] =18 ; + rq->data_len =18 ; rq->cmd_type =REQ_TYPE_SENSE ;
@@ -310,7 +310,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) sense_key = err >>4 ;if (rq ==NULL ) { -printk ("%s: missing rq in cdrom_decode_status\n" , drive->name); +printk (KERN_ERR "%s: missing rq in cdrom_decode_status\n" , + drive->name);return 1 ; }
@@ -379,7 +380,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)cdrom_saw_media_change (drive);/* fail the request. */ -printk ("%s: tray open\n" , drive->name); +printk (KERN_ERR "%s: tray open\n" , drive->name); do_end_request =1 ; }else {struct cdrom_info *info = drive->driver_data;
@@ -411,7 +412,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) } }else if (sense_key ==UNIT_ATTENTION ) {/* media change. */ -cdrom_saw_media_change (drive); +cdrom_saw_media_change (drive);/* * Arrange to retry the request but be sure to give up
@@ -780,11 +781,10 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive) info->cd_flags |=IDE_CD_FLAG_SEEKING ; -if (retry &&time_after (jiffies, info->start_seek +IDECD_SEEK_TIMER )) { -if (--retry ==0 ) { - drive->dsc_overlap =0 ; - } - } +if (retry &&time_after (jiffies, info->start_seek +IDECD_SEEK_TIMER )) +if (--retry ==0 ) + drive->dsc_overlap =0 ; +return ide_stopped; }
@@ -1216,8 +1216,8 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)/* * cdrom driver request routine. */ -static ide_startstop_t -ide_do_rw_cdrom (ide_drive_t *drive,struct request *rq,sector_t block) +static ide_startstop_t ide_do_rw_cdrom (ide_drive_t *drive,struct request *rq, +sector_t block) {ide_startstop_t action;struct cdrom_info *info = drive->driver_data;
@@ -1275,8 +1275,7 @@ ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block)* subsequent request sense command. The pointer can also be NULL, in which case * no sense information is returned. */ -static -void msf_from_bcd (struct atapi_msf *msf) +static void msf_from_bcd (struct atapi_msf *msf) { msf->minute =BCD2BIN (msf->minute); msf->second =BCD2BIN (msf->second);
@@ -1491,7 +1490,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) toc->last_session_lba =be32_to_cpu (ms_tmp.ent.addr.lba); }else { - ms_tmp.hdr.first_track = ms_tmp.hdr.last_track =CDROM_LEADOUT ; + ms_tmp.hdr.last_track =CDROM_LEADOUT ; + ms_tmp.hdr.first_track = ms_tmp.hdr.last_track; toc->last_session_lba =msf_to_lba (0 ,2 ,0 );/* 0m 2s 0f */ }
@@ -1605,8 +1605,7 @@ static int ide_cdrom_register(ide_drive_t *drive, int nslots)return register_cdrom (devinfo); } -static -int ide_cdrom_probe_capabilities (ide_drive_t *drive) +static int ide_cdrom_probe_capabilities (ide_drive_t *drive) {struct cdrom_info *cd = drive->driver_data;struct cdrom_device_info *cdi = &cd->devinfo;
@@ -1796,8 +1795,8 @@ static sector_t ide_cdrom_capacity(ide_drive_t *drive)return capacity * sectors_per_frame; } -static int proc_idecd_read_capacity - (char *page,char **start,off_t off,int count,int *eof,void *data) +static int proc_idecd_read_capacity (char *page,char **start,off_t off, +int count,int *eof,void *data) {ide_drive_t *drive = data;int len;
@@ -1877,8 +1876,7 @@ static unsigned int ide_cd_flags(struct hd_driveid *id)return 0 ; } -static -int ide_cdrom_setup (ide_drive_t *drive) +static int ide_cdrom_setup (ide_drive_t *drive) {struct cdrom_info *cd = drive->driver_data;struct cdrom_device_info *cdi = &cd->devinfo;
Signature · 1 line
1.5.4.1
PATCH 4/5 ide-cd: shorten lines longer than 80 columns
In reply to Borislav Petkov--- drivers/ide/ide-cd.c | 75 +++++++++++++++++++++++++++++++++---------------- 1 files changed, 50 insertions(+), 25 deletions(-)
drivers/ide/ide-cd.c +50 -25
@@ -279,11 +279,11 @@ static void cdrom_end_request(ide_drive_t *drive, int uptodate)ide_end_request (drive, uptodate, nsectors); } -static void ide_dump_status_no_sense (ide_drive_t *drive,const char *msg,u8 stat) +static void ide_dump_status_no_sense (ide_drive_t *drive,const char *msg,u8 st) { -if (stat &0x80 ) +if (st &0x80 )return ; -ide_dump_status (drive, msg, stat); +ide_dump_status (drive, msg, st); }/*
@@ -390,7 +390,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)* data from cache. */ if (!rq->errors) - info->write_timeout = jiffies +ATAPI_WAIT_WRITE_BUSY ; + info->write_timeout = jiffies + +ATAPI_WAIT_WRITE_BUSY ; rq->errors =1 ;if (time_after (jiffies, info->write_timeout)) do_end_request =1 ;
@@ -403,7 +404,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)*/ spin_lock_irqsave (&ide_lock, flags);blk_plug_device (drive->queue); -spin_unlock_irqrestore (&ide_lock, flags); +spin_unlock_irqrestore (&ide_lock, + flags);return 1 ; } }
@@ -430,11 +432,14 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)* No point in re-trying a zillion times on a bad * sector. If we got here the error is not correctable. */ -ide_dump_status_no_sense (drive,"media error (bad sector)" , stat); +ide_dump_status_no_sense (drive, +"media error (bad sector)" , + stat); do_end_request =1 ; }else if (sense_key ==BLANK_CHECK ) {/* disk appears blank ?? */ -ide_dump_status_no_sense (drive,"media error (blank)" , stat); +ide_dump_status_no_sense (drive,"media error (blank)" , + stat); do_end_request =1 ; }else if ((err & ~ABRT_ERR ) !=0 ) {/* go to the default handler for other errors. */
@@ -504,7 +509,8 @@ static int cdrom_timer_expiry(ide_drive_t *drive)break ;default :if (!(rq->cmd_flags &REQ_QUIET )) -printk (KERN_INFO "ide-cd: cmd 0x%x timed out\n" , rq->cmd[0 ]); +printk (KERN_INFO "ide-cd: cmd 0x%x timed out\n" , + rq->cmd[0 ]); wait =0 ;break ; }
@@ -545,7 +551,8 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, drive->waiting_for_dma =0 ;/* packet command */ -ide_execute_command (drive,WIN_PACKETCMD , handler,ATAPI_WAIT_PC , cdrom_timer_expiry); +ide_execute_command (drive,WIN_PACKETCMD , handler, +ATAPI_WAIT_PC , cdrom_timer_expiry);return ide_started; }else {unsigned long flags;
@@ -802,7 +809,8 @@ static ide_startstop_t cdrom_start_seek(ide_drive_t *drive, unsigned int block) info->dma =0 ; info->start_seek = jiffies; -return cdrom_start_packet_command (drive,0 , cdrom_start_seek_continuation); +return cdrom_start_packet_command (drive,0 , + cdrom_start_seek_continuation); }/*
@@ -812,13 +820,15 @@ static ide_startstop_t cdrom_start_seek(ide_drive_t *drive, unsigned int block)static void restore_request (struct request *rq) {if (rq->buffer !=bio_data (rq->bio)) { -sector_t n = (rq->buffer - (char *)bio_data (rq->bio)) /SECTOR_SIZE ; +sector_t n = (rq->buffer - (char *)bio_data (rq->bio)) / +SECTOR_SIZE ; rq->buffer =bio_data (rq->bio); rq->nr_sectors += n; rq->sector -= n; } - rq->hard_cur_sectors = rq->current_nr_sectors =bio_cur_sectors (rq->bio); + rq->current_nr_sectors =bio_cur_sectors (rq->bio); + rq->hard_cur_sectors = rq->current_nr_sectors; rq->hard_nr_sectors = rq->nr_sectors; rq->hard_sector = rq->sector; rq->q->prep_rq_fn (rq->q, rq);
@@ -1183,7 +1193,8 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)/* sg request */ if (rq->bio) {int mask = drive->queue->dma_alignment; -unsigned long addr = (unsigned long )page_address (bio_page (rq->bio)); +unsigned long addr = (unsigned long ) +page_address (bio_page (rq->bio)); info->dma = drive->using_dma;
@@ -1198,7 +1209,8 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) }/* start sending the command to the drive. */ -return cdrom_start_packet_command (drive, rq->data_len, cdrom_do_newpc_cont); +return cdrom_start_packet_command (drive, rq->data_len, + cdrom_do_newpc_cont); }/*
@@ -1217,14 +1229,21 @@ ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block)if ((stat &SEEK_STAT ) !=SEEK_STAT ) {if (elapsed <IDECD_SEEK_TIMEOUT ) { -ide_stall_queue (drive,IDECD_SEEK_TIMER ); +ide_stall_queue (drive, +IDECD_SEEK_TIMER );return ide_stopped; } -printk (KERN_ERR "%s: DSC timeout\n" , drive->name); +printk (KERN_ERR "%s: DSC timeout\n" , + drive->name); } info->cd_flags &= ~IDE_CD_FLAG_SEEKING ; } -if ((rq_data_dir (rq) ==READ ) &&IDE_LARGE_SEEK (info->last_block, block,IDECD_SEEK_THRESHOLD ) && drive->dsc_overlap) +if ((rq_data_dir (rq) ==READ ) && +IDE_LARGE_SEEK (info->last_block, + block, +IDECD_SEEK_THRESHOLD ) && + drive->dsc_overlap) + action =cdrom_start_seek (drive, block);else action =cdrom_start_rw (drive, rq);
@@ -1357,7 +1376,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)/* try to allocate space */ toc =kmalloc (sizeof (struct atapi_toc ),GFP_KERNEL );if (toc ==NULL ) { -printk (KERN_ERR "%s: No cdrom TOC buffer!\n" , drive->name); +printk (KERN_ERR "%s: No cdrom TOC buffer!\n" , + drive->name);return -ENOMEM ; } info->toc = toc;
@@ -1600,7 +1620,8 @@ int ide_cdrom_probe_capabilities(ide_drive_t *drive)if (drive->media == ide_optical) { cdi->mask &= ~(CDC_MO_DRIVE |CDC_RAM ); -printk (KERN_ERR "%s: ATAPI magneto-optical drive\n" , drive->name); +printk (KERN_ERR "%s: ATAPI magneto-optical drive\n" , + drive->name);return nslots; }
@@ -1899,7 +1920,8 @@ int ide_cdrom_setup(ide_drive_t *drive) drive->dsc_overlap = (drive->next != drive);if (ide_cdrom_register (drive, nslots)) { -printk (KERN_ERR "%s: ide_cdrom_setup failed to register device with the cdrom driver.\n" , drive->name); +printk (KERN_ERR "%s: %s failed to register device with the" +" cdrom driver.\n" , drive->name, __func__); cd->devinfo.handle =NULL ;return 1 ; }
@@ -1927,8 +1949,8 @@ static void ide_cd_release(struct kref *kref)kfree (info->toc);if (devinfo->handle == drive &&unregister_cdrom (devinfo)) -printk (KERN_ERR "%s: %s failed to unregister device from the cdrom " -"driver.\n" , __func__, drive->name); +printk (KERN_ERR "%s: %s failed to unregister device from the" +" cdrom driver.\n" , drive->name, __func__); drive->dsc_overlap =0 ; drive->driver_data =NULL ;blk_queue_prep_rq (drive->queue,NULL );
@@ -2097,17 +2119,20 @@ static int ide_cd_probe(ide_drive_t *drive)/* skip drives that we were told to ignore */ if (ignore !=NULL ) {if (strstr (ignore, drive->name)) { -printk (KERN_INFO "ide-cd: ignoring drive %s\n" , drive->name); +printk (KERN_INFO "ide-cd: ignoring drive %s\n" , + drive->name); goto failed; } }if (drive->scsi) { -printk (KERN_INFO "ide-cd: passing drive %s to ide-scsi emulation.\n" , drive->name); +printk (KERN_INFO "ide-cd: passing drive %s to ide-scsi " +"emulation.\n" , drive->name); goto failed; } info =kzalloc (sizeof (struct cdrom_info ),GFP_KERNEL );if (info ==NULL ) { -printk (KERN_ERR "%s: Can't allocate a cdrom structure\n" , drive->name); +printk (KERN_ERR "%s: Can't allocate a cdrom structure\n" , + drive->name); goto failed; }
Signature · 1 line
1.5.4.1
PATCH 3/5 ide-cd: fixup comments
In reply to Borislav Petkov--- drivers/ide/ide-cd.c | 401 ++++++++++++++++++++++++-------------------------- 1 files changed, 192 insertions(+), 209 deletions(-)
drivers/ide/ide-cd.c +192 -209
@@ -39,7 +39,8 @@#include <linux/mutex.h> #include <linux/bcd.h> -#include <scsi/scsi.h> /* For SCSI -> ATAPI command conversion */ +/* For SCSI -> ATAPI command conversion */ +#include <scsi/scsi.h> #include <linux/irq.h> #include <linux/io.h>
@@ -77,12 +78,11 @@ static void ide_cd_put(struct cdrom_info *cd)mutex_unlock (&idecd_ref_mutex); } -/**************************************************************************** +/* * Generic packet command support and error handling routines. */ -/* Mark that we've seen a media change, and invalidate our internal -buffers. */ +/* Mark that we've seen a media change and invalidate our internal buffers. */ static void cdrom_saw_media_change (ide_drive_t *drive) {struct cdrom_info *cd = drive->driver_data;
@@ -105,9 +105,8 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,break ;case NOT_READY :/* -* don't care about tray state messages for -* e.g. capacity commands or in-progress or -* becoming ready +* don't care about tray state messages for e.g. capacity +* commands or in-progress or becoming ready */ if (sense->asc ==0x3a || sense->asc ==0x04 )break ;
@@ -115,8 +114,8 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,break ;case ILLEGAL_REQUEST :/* -* don't log START_STOP unit with LoEj set, since -* we cannot reliably check if drive can auto-close +* don't log START_STOP unit with LoEj set, since we cannot +* reliably check if drive can auto-close */ if (rq->cmd[0 ] ==GPCMD_START_STOP_UNIT && sense->asc ==0x24 )break ;
@@ -124,9 +123,9 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,break ;case UNIT_ATTENTION :/* -* Make good and sure we've seen this potential media -* change. Some drives (i.e. Creative) fail to present -* the correct sense key in the error register. +* Make good and sure we've seen this potential media change. +* Some drives (i.e. Creative) fail to present the correct sense +* key in the error register. */ cdrom_saw_media_change (drive);break ;
@@ -151,15 +150,16 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,return ;/* -* If a read toc is executed for a CD-R or CD-RW medium where -* the first toc has not been recorded yet, it will fail with -* 05/24/00 (which is a confusing error) +* If a read toc is executed for a CD-R or CD-RW medium where the first +* toc has not been recorded yet, it will fail with 05/24/00 (which is a +* confusing error) */ if (failed_command && failed_command->cmd[0 ] ==GPCMD_READ_TOC_PMA_ATIP )if (sense->sense_key ==0x05 && sense->asc ==0x24 )return ; -if (sense->error_code ==0x70 ) {/* Current Error */ +/* current error */ +if (sense->error_code ==0x70 ) {switch (sense->sense_key) {case MEDIUM_ERROR :case VOLUME_OVERFLOW :
@@ -178,7 +178,8 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,if (bio_sectors <4 ) bio_sectors =4 ;if (drive->queue->hardsect_size ==2048 ) - sector <<=2 ;/* Device sector size is 2K */ +/* device sector size is 2K */ + sector <<=2 ; sector &= ~(bio_sectors -1 ); valid = (sector - failed_command->sector) <<9 ;
@@ -194,9 +195,7 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,ide_cd_log_error (drive->name, failed_command, sense); } -/* -* Initialize a ide-cd packet command request -*/ +/* Initialize a ide-cd packet command request */ void ide_cd_init_rq (ide_drive_t *drive,struct request *rq) {struct cdrom_info *cd = drive->driver_data;
@@ -252,7 +251,7 @@ static void cdrom_end_request(ide_drive_t *drive, int uptodate) }cdrom_analyze_sense_data (drive, failed, sense);/* -* now end failed request +* now end the failed request */ if (blk_fs_request (failed)) { if (ide_end_dequeued_request(drive, failed, 0,
@@ -287,14 +286,17 @@ static void ide_dump_status_no_sense(ide_drive_t *drive, const char *msg, u8 staide_dump_status (drive, msg, stat); } -/* Returns 0 if the request should be continued. -Returns 1 if the request was ended. */ +/* +* Returns: +* 0: if the request should be continued. +* 1: if the request was ended. +*/ static int cdrom_decode_status (ide_drive_t *drive,int good_stat,int *stat_ret) {struct request *rq =HWGROUP (drive)->rq;int stat, err, sense_key; -/* Check for errors. */ +/* check for errors. */ stat =ide_read_status (drive);if (stat_ret)
@@ -303,7 +305,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)if (OK_STAT (stat, good_stat,BAD_R_STAT ))return 0 ; -/* Get the IDE error register. */ +/* get the IDE error register. */ err =ide_read_error (drive); sense_key = err >>4 ;
@@ -313,10 +315,11 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) }if (blk_sense_request (rq)) { -/* We got an error trying to get sense info -from the drive (probably while trying -to recover from a former error). Just give up. */ - +/* +* We got an error trying to get sense info from the drive +* (probably while trying to recover from a former error). +* Just give up. +*/ rq->cmd_flags |=REQ_FAILED ;cdrom_end_request (drive,0 );ide_error (drive,"request sense failure" , stat);
@@ -332,13 +335,12 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)if (blk_pc_request (rq) && !rq->errors) rq->errors =SAM_STAT_CHECK_CONDITION ; -/* Check for tray open. */ +/* check for tray open. */ if (sense_key ==NOT_READY ) {cdrom_saw_media_change (drive); }else if (sense_key ==UNIT_ATTENTION ) { -/* Check for media change. */ +/* check for media change. */ cdrom_saw_media_change (drive); -/*printk("%s: media changed\n",drive->name);*/ return 0 ; }else if (sense_key ==ILLEGAL_REQUEST && rq->cmd[0 ] ==GPCMD_START_STOP_UNIT ) {
@@ -350,7 +352,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)* cdrom_log_sense() knows this! */ }else if (!(rq->cmd_flags &REQ_QUIET )) { -/* Otherwise, print an error. */ +/* otherwise, print an error. */ ide_dump_status (drive,"packet command error" , stat); }
@@ -366,25 +368,27 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) }else if (blk_fs_request (rq)) {int do_end_request =0 ; -/* Handle errors from READ and WRITE requests. */ +/* handle errors from READ and WRITE requests. */ if (blk_noretry_request (rq)) do_end_request =1 ;if (sense_key ==NOT_READY ) { -/* Tray open. */ +/* tray open. */ if (rq_data_dir (rq) ==READ ) {cdrom_saw_media_change (drive); -/* Fail the request. */ +/* fail the request. */ printk ("%s: tray open\n" , drive->name); do_end_request =1 ; }else {struct cdrom_info *info = drive->driver_data; -/* allow the drive 5 seconds to recover, some +/* +* allow the drive 5 seconds to recover, some * devices will return this error while flushing -* data from cache */ +* data from cache. +*/ if (!rq->errors) info->write_timeout = jiffies +ATAPI_WAIT_WRITE_BUSY ; rq->errors =1 ;
@@ -394,8 +398,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)unsigned long flags;/* -* take a breather relying on the -* unplug timer to kick us again +* take a breather relying on the unplug +* timer to kick us again */ spin_lock_irqsave (&ide_lock, flags);blk_plug_device (drive->queue);
@@ -404,55 +408,54 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) } } }else if (sense_key ==UNIT_ATTENTION ) { -/* Media change. */ +/* media change. */ cdrom_saw_media_change (drive);/* -* Arrange to retry the request. -* But be sure to give up if we've retried -* too many times. +* Arrange to retry the request but be sure to give up +* if we've retried too many times. */ if (++rq->errors >ERROR_MAX ) do_end_request =1 ; }else if (sense_key ==ILLEGAL_REQUEST || sense_key ==DATA_PROTECT ) {/* -* No point in retrying after an illegal -* request or data protect error. +* No point in retrying after an illegal request or data +* protect error. */ ide_dump_status_no_sense (drive,"command error" , stat); do_end_request =1 ; }else if (sense_key ==MEDIUM_ERROR ) {/* * No point in re-trying a zillion times on a bad -* sector... If we got here the error is not correctable +* sector. If we got here the error is not correctable. */ ide_dump_status_no_sense (drive,"media error (bad sector)" , stat); do_end_request =1 ; }else if (sense_key ==BLANK_CHECK ) { -/* Disk appears blank ?? */ +/* disk appears blank ?? */ ide_dump_status_no_sense (drive,"media error (blank)" , stat); do_end_request =1 ; }else if ((err & ~ABRT_ERR ) !=0 ) { -/* Go to the default handler -for other errors. */ +/* go to the default handler for other errors. */ ide_error (drive,"cdrom_decode_status" , stat);return 1 ; }else if ((++rq->errors >ERROR_MAX )) { -/* We've racked up too many retries. Abort. */ +/* we've racked up too many retries, abort. */ do_end_request =1 ; } -/* End a request through request sense analysis when we have -sense data. We need this in order to perform end of media -processing */ - +/* +* End a request through request sense analysis when we have +* sense data. We need this in order to perform end of media +* processing. +*/ if (do_end_request) goto end_request;/* -* If we got a CHECK_CONDITION status, -* queue a request sense command. +* If we got a CHECK_CONDITION status, queue +* a request sense command. */ if (stat &ERR_STAT )cdrom_queue_request_sense (drive,NULL ,NULL );
@@ -461,7 +464,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)cdrom_end_request (drive,0 ); } -/* Retry, or handle the next request. */ +/* retry, or handle the next request. */ return 1 ; end_request:
@@ -486,10 +489,10 @@ static int cdrom_timer_expiry(ide_drive_t *drive)unsigned long wait =0 ;/* -* Some commands are *slow* and normally take a long time to -* complete. Usually we can use the ATAPI "disconnect" to bypass -* this, but not all commands/drives support that. Let -* ide_timer_expiry keep polling us for these. +* Some commands are *slow* and normally take a long time to complete. +* Usually we can use the ATAPI "disconnect" to bypass this, but not all +* commands/drives support that. Let ide_timer_expiry keep polling us +* for these. */ switch (rq->cmd[0 ]) {case GPCMD_BLANK :
@@ -508,13 +511,14 @@ static int cdrom_timer_expiry(ide_drive_t *drive)return wait; } -/* Set up the device registers for transferring a packet command on DEV, -expecting to later transfer XFERLEN bytes. HANDLER is the routine -which actually transfers the command to the drive. If this is a -drq_interrupt device, this routine will arrange for HANDLER to be -called when the interrupt from the drive arrives. Otherwise, HANDLER -will be called immediately after the drive is prepared for the transfer. */ - +/* +* Set up the device registers for transferring a packet command on DEV, +* expecting to later transfer XFERLEN bytes. HANDLER is the routine +* which actually transfers the command to the drive. If this is a +* drq_interrupt device, this routine will arrange for HANDLER to be +* called when the interrupt from the drive arrives. Otherwise, HANDLER +* will be called immediately after the drive is prepared for the transfer. +*/ static ide_startstop_t cdrom_start_packet_command (ide_drive_t *drive,int xferlen,ide_handler_t *handler)
@@ -523,7 +527,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,struct cdrom_info *info = drive->driver_data;ide_hwif_t *hwif = drive->hwif; -/* Wait for the controller to be idle. */ +/* wait for the controller to be idle. */ if (ide_wait_stat (&startstop, drive,0 ,BUSY_STAT ,WAIT_READY ))return startstop;
@@ -531,7 +535,7 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,if (info->dma) info->dma = !hwif->dma_setup (drive); -/* Set up the controller registers. */ +/* set up the controller registers. */ ide_pktcmd_tf_load (drive,IDE_TFLAG_OUT_NSECT |IDE_TFLAG_OUT_LBAL |IDE_TFLAG_NO_SELECT_MASK , xferlen, info->dma);
@@ -557,11 +561,12 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, } } -/* Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. -The device registers must have already been prepared -by cdrom_start_packet_command. -HANDLER is the interrupt handler to call when the command completes -or there's data ready. */ +/* +* Send a packet command to DRIVE described by CMD_BUF and CMD_LEN. The device +* registers must have already been prepared by cdrom_start_packet_command. +* HANDLER is the interrupt handler to call when the command completes or +* there's data ready. +*/ #define ATAPI_MIN_CDB_BYTES 12 static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, struct request *rq,
@@ -573,24 +578,26 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,ide_startstop_t startstop;if (info->cd_flags &IDE_CD_FLAG_DRQ_INTERRUPT ) { -/* Here we should have been called after receiving an interrupt -from the device. DRQ should how be set. */ +/* +* Here we should have been called after receiving an interrupt +* from the device. DRQ should how be set. +*/ -/* Check for errors. */ +/* check for errors. */ if (cdrom_decode_status (drive,DRQ_STAT ,NULL ))return ide_stopped; -/* Ok, next interrupt will be DMA interrupt. */ +/* ok, next interrupt will be DMA interrupt. */ if (info->dma) drive->waiting_for_dma =1 ; }else { -/* Otherwise, we must wait for DRQ to get set. */ +/* otherwise, we must wait for DRQ to get set. */ if (ide_wait_stat (&startstop, drive,DRQ_STAT ,BUSY_STAT ,WAIT_READY ))return startstop; } -/* Arm the interrupt handler. */ +/* arm the interrupt handler. */ ide_set_handler (drive, handler, rq->timeout, cdrom_timer_expiry);/* ATAPI commands get padded out to 12 bytes minimum */
@@ -598,20 +605,19 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,if (cmd_len <ATAPI_MIN_CDB_BYTES ) cmd_len =ATAPI_MIN_CDB_BYTES ; -/* Send the command to the device. */ +/* send the command to the device. */ HWIF (drive)->atapi_output_bytes (drive, rq->cmd, cmd_len); -/* Start the DMA if need be */ +/* start the DMA if need be */ if (info->dma) hwif->dma_start (drive);return ide_started; } -/**************************************************************************** +/* * Block read functions. */ -static void ide_cd_pad_transfer (ide_drive_t *drive,xfer_func_t *xf,int len) {while (len >0 ) {
@@ -649,20 +655,21 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,ide_hwif_t *hwif = drive->hwif;xfer_func_t *xf; -/* Whoops... */ +/* whoops... */ printk (KERN_ERR "%s: %s: wrong transfer direction!\n" , drive->name, __func__); xf = rw ? hwif->atapi_output_bytes : hwif->atapi_input_bytes;ide_cd_pad_transfer (drive, xf, len); }else if (rw ==0 && ireason ==1 ) { -/* Some drives (ASUS) seem to tell us that status -* info is available. just get it and ignore. +/* +* Some drives (ASUS) seem to tell us that status info is +* available. just get it and ignore. */ (void )ide_read_status (drive);return 0 ; }else { -/* Drive wants a command packet, or invalid ireason... */ +/* drive wants a command packet, or invalid ireason... */ printk (KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n" , drive->name, __func__, ireason); }
@@ -702,10 +709,10 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)static ide_startstop_t cdrom_newpc_intr (ide_drive_t *);/* -* Routine to send a read/write packet command to the drive. -* This is usually called directly from cdrom_start_{read,write}(). -* However, for drq_interrupt devices, it is called from an interrupt -* when the drive is ready to accept the command. +* Routine to send a read/write packet command to the drive. This is usually +* called directly from cdrom_start_{read,write}(). However, for drq_interrupt +* devices, it is called from an interrupt when the drive is ready to accept +* the command. */ static ide_startstop_t cdrom_start_rw_cont (ide_drive_t *drive) {
@@ -727,7 +734,7 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)* is larger than the buffer size. */ if (nskip >0 ) { -/* Sanity check... */ +/* sanity check... */ if (rq->current_nr_sectors !=bio_cur_sectors (rq->bio)) { printk(KERN_ERR "%s: %s: buffer botch (%u)\n",
@@ -744,10 +751,10 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)/* the immediate bit */ rq->cmd[1 ] =1 <<3 ;#endif -/* Set up the command */ +/* set up the command */ rq->timeout =ATAPI_WAIT_PC ; -/* Send the command to the drive and return. */ +/* send the command to the drive and return. */ return cdrom_transfer_packet_command (drive, rq, cdrom_newpc_intr); }
@@ -768,12 +775,7 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive)if (retry &&time_after (jiffies, info->start_seek +IDECD_SEEK_TIMER )) {if (--retry ==0 ) { -/* -* this condition is far too common, to bother -* users about it -*/ -/* printk("%s: disabled DSC seek overlap\n", drive->name);*/ - drive->dsc_overlap =0 ; + drive->dsc_overlap =0 ; } }return ide_stopped;
@@ -804,8 +806,8 @@ static ide_startstop_t cdrom_start_seek(ide_drive_t *drive, unsigned int block) }/* -* Fix up a possibly partially-processed request so that we can -* start it over entirely, or even put it back on the request queue. +* Fix up a possibly partially-processed request so that we can start it over +* entirely, or even put it back on the request queue. */ static void restore_request (struct request *rq) {
@@ -822,10 +824,9 @@ static void restore_request(struct request *rq) rq->q->prep_rq_fn (rq->q, rq); } -/**************************************************************************** -* Execute all other packet commands. +/* +* All other packet commands. */ -static void ide_cd_request_sense_fixup (struct request *rq) {/*
@@ -849,7 +850,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq)if (rq->sense ==NULL ) rq->sense = &sense; -/* Start of retry loop. */ +/* start of retry loop. */ do { int error; unsigned long time = jiffies;
@@ -858,41 +859,45 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq) error =ide_do_drive_cmd (drive, rq, ide_wait); time = jiffies - time; -/* FIXME: we should probably abort/retry or something -* in case of failure */ +/* +* FIXME: we should probably abort/retry or something in case of +* failure. +*/ if (rq->cmd_flags &REQ_FAILED ) { -/* The request failed. Retry if it was due to a unit -attention status -(usually means media was changed). */ +/* +* The request failed. Retry if it was due to a unit +* attention status (usually means media was changed). +*/ struct request_sense *reqbuf = rq->sense;if (reqbuf->sense_key ==UNIT_ATTENTION )cdrom_saw_media_change (drive);else if (reqbuf->sense_key ==NOT_READY && reqbuf->asc ==4 && reqbuf->ascq !=4 ) { -/* The drive is in the process of loading -a disk. Retry, but wait a little to give -the drive time to complete the load. */ +/* +* The drive is in the process of loading +* a disk. Retry, but wait a little to give +* the drive time to complete the load. +*/ ssleep (2 ); }else { -/* Otherwise, don't retry. */ +/* otherwise, don't retry. */ retries =0 ; } --retries; } -/* End of retry loop. */ +/* end of retry loop. */ }while ((rq->cmd_flags &REQ_FAILED ) && retries >=0 ); -/* Return an error if the command failed. */ +/* return an error if the command failed. */ return (rq->cmd_flags &REQ_FAILED ) ? -EIO :0 ; }/* -* Called from blk_end_request_callback() after the data of the request -* is completed and before the request is completed. -* By returning value '1', blk_end_request_callback() returns immediately -* without completing the request. +* Called from blk_end_request_callback() after the data of the request is +* completed and before the request itself is completed. By returning value '1', +* blk_end_request_callback() returns immediately without completing it. */ static int cdrom_newpc_intr_dummy_cb (struct request *rq) {
@@ -911,7 +916,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)unsigned int timeout;u8 lowcyl, highcyl; -/* Check for errors. */ +/* check for errors. */ dma = info->dma;if (dma) { info->dma =0 ;
@@ -926,9 +931,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)if (cdrom_decode_status (drive,0 , &stat))return ide_stopped; -/* -* using dma, transfer is complete now -*/ +/* using dma, transfer is complete now */ if (dma) {if (dma_error)return ide_error (drive,"dma error" , stat);
@@ -939,9 +942,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) goto end_request; } -/* -* ok we fall to pio :/ -*/ +/* ok we fall to pio :/ */ ireason = hwif->INB (hwif->io_ports[IDE_IREASON_OFFSET ]) &0x3 ; lowcyl = hwif->INB (hwif->io_ports[IDE_BCOUNTL_OFFSET ]); highcyl = hwif->INB (hwif->io_ports[IDE_BCOUNTH_OFFSET ]);
@@ -952,9 +953,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)if (thislen > len) thislen = len; -/* -* If DRQ is clear, the command has completed. -*/ +/* If DRQ is clear, the command has completed. */ if ((stat &DRQ_STAT ) ==0 ) {if (blk_fs_request (rq)) {/*
@@ -975,15 +974,13 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)return ide_stopped; }else if (!blk_pc_request (rq)) {ide_cd_request_sense_fixup (rq); -/* Complain if we still have data left to transfer. */ +/* complain if we still have data left to transfer. */ uptodate = rq->data_len ?0 :1 ; } goto end_request; } -/* -* check which way to transfer data -*/ +/* check which way to transfer data */ if (ide_cd_check_ireason (drive, rq, len, ireason, write))return ide_stopped;
@@ -1019,16 +1016,12 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) xferfunc =HWIF (drive)->atapi_input_bytes; } -/* -* transfer data -*/ +/* transfer data */ while (thislen >0 ) {u8 *ptr =blk_fs_request (rq) ?NULL : rq->data;int blen = rq->data_len; -/* -* bio backed? -*/ +/* bio backed? */ if (rq->bio) {if (blk_fs_request (rq)) { ptr = rq->buffer;
@@ -1043,7 +1036,8 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)if (blk_fs_request (rq) && !write)/* * If the buffers are full, pipe the rest into -* oblivion. */ +* oblivion. +*/ ide_cd_drain_data (drive, thislen >>9 );else { printk(KERN_ERR "%s: confused, missing data\n",
@@ -1090,9 +1084,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) rq->sense_len += blen; } -/* -* pad, if necessary -*/ +/* pad, if necessary */ if (!blk_fs_request (rq) && len >0 )ide_cd_pad_transfer (drive, xferfunc, len);
@@ -1136,9 +1128,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)queue_hardsect_size (drive->queue) >>SECTOR_BITS ;if (write) { -/* -* disk has become write protected -*/ +/* disk has become write protected */ if (cd->disk->policy) {cdrom_end_request (drive,0 );return ide_stopped;
@@ -1151,9 +1141,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)restore_request (rq); } -/* -* use DMA, if possible / writes *must* be hardware frame aligned -*/ +/* use DMA, if possible / writes *must* be hardware frame aligned */ if ((rq->nr_sectors & (sectors_per_frame -1 )) || (rq->sector & (sectors_per_frame -1 ))) {if (write) {
@@ -1167,7 +1155,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)if (write) cd->devinfo.media_written =1 ; -/* Start sending the read/write request to the drive. */ +/* start sending the read/write request to the drive. */ return cdrom_start_packet_command (drive,32768 , cdrom_start_rw_cont); }
@@ -1192,9 +1180,7 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) info->dma =0 ; -/* -* sg request -*/ +/* sg request */ if (rq->bio) {int mask = drive->queue->dma_alignment;unsigned long addr = (unsigned long )page_address (bio_page (rq->bio));
@@ -1211,11 +1197,11 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) info->dma =0 ; } -/* Start sending the command to the drive. */ +/* start sending the command to the drive. */ return cdrom_start_packet_command (drive, rq->data_len, cdrom_do_newpc_cont); } -/**************************************************************************** +/* * cdrom driver request routine. */ static ide_startstop_t
@@ -1248,9 +1234,8 @@ ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block) rq->cmd_type == REQ_TYPE_ATA_PC) {return cdrom_do_block_pc (drive, rq); } else if (blk_special_request(rq)) { -/* -* right now this can only be a reset... -*/ + +/* right now this can only be a reset... */ cdrom_end_request (drive,1 );return ide_stopped; }
@@ -1262,16 +1247,15 @@ ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, sector_t block) -/**************************************************************************** +/* * Ioctl handling. * -* Routines which queue packet commands take as a final argument a pointer -* to a request_sense struct. If execution of the command results -* in an error with a CHECK CONDITION status, this structure will be filled -* with the results of the subsequent request sense command. The pointer -* can also be NULL, in which case no sense information is returned. +* Routines which queue packet commands take as a final argument a pointer to a +* request_sense struct. If execution of the command results in an error with a +* CHECK CONDITION status, this structure will be filled with the results of the +* subsequent request sense command. The pointer can also be NULL, in which case +* no sense information is returned. */ -static void msf_from_bcd (struct atapi_msf *msf) {
@@ -1293,8 +1277,8 @@ int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense) req.cmd_flags |=REQ_QUIET ;/* -* Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to -* switch CDs instead of supporting the LOAD_UNLOAD opcode. +* Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs +* instead of supporting the LOAD_UNLOAD opcode. */ req.cmd[7 ] = cdi->sanyo_slot %3 ;
@@ -1370,7 +1354,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)unsigned long sectors_per_frame =SECTORS_PER_FRAME ;if (toc ==NULL ) { -/* Try to allocate space. */ +/* try to allocate space */ toc =kmalloc (sizeof (struct atapi_toc ),GFP_KERNEL );if (toc ==NULL ) {printk (KERN_ERR "%s: No cdrom TOC buffer!\n" , drive->name);
@@ -1379,27 +1363,29 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) info->toc = toc; } -/* Check to see if the existing data is still valid. -If it is, just return. */ +/* +* Check to see if the existing data is still valid. If it is, +* just return. +*/ (void )cdrom_check_status (drive, sense);if (info->cd_flags &IDE_CD_FLAG_TOC_VALID )return 0 ; -/* Try to get the total cdrom capacity and sector size. */ +/* try to get the total cdrom capacity and sector size. */ stat =cdrom_read_capacity (drive, &toc->capacity, §ors_per_frame, sense);if (stat) toc->capacity =0x1fffff ;set_capacity (info->disk, toc->capacity * sectors_per_frame); -/* Save a private copy of te TOC capacity for error handling */ +/* save a private copy of the TOC capacity for error handling */ drive->probed_capacity = toc->capacity * sectors_per_frame;blk_queue_hardsect_size (drive->queue, sectors_per_frame <<SECTOR_BITS ); -/* First read just the header, so we know how long the TOC is. */ +/* first read just the header, so we know how long the TOC is. */ stat =cdrom_read_tocentry (drive,0 ,1 ,0 , (char *) &toc->hdr,sizeof (struct atapi_toc_header ), sense);if (stat)
@@ -1416,7 +1402,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)if (ntracks >MAX_TRACKS ) ntracks =MAX_TRACKS ; -/* Now read the whole schmeer. */ +/* now read the whole schmeer. */ stat = cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0, (char *)&toc->hdr, sizeof(struct atapi_toc_header) +
@@ -1424,15 +1410,18 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) sizeof(struct atapi_toc_entry), sense);if (stat && toc->hdr.first_track >1 ) { -/* Cds with CDI tracks only don't have any TOC entries, -despite of this the returned values are -first_track == last_track = number of CDI tracks + 1, -so that this case is indistinguishable from the same -layout plus an additional audio track. -If we get an error for the regular case, we assume -a CDI without additional audio tracks. In this case -the readable TOC is empty (CDI tracks are not included) -and only holds the Leadout entry. Heiko Eißfeldt */ +/* +* Cds with CDI tracks only don't have any TOC entries, despite +* of this the returned values are +* first_track == last_track = number of CDI tracks + 1, +* so that this case is indistinguishable from the same layout +* plus an additional audio track. If we get an error for the +* regular case, we assume a CDI without additional audio +* tracks. In this case the readable TOC is empty (CDI tracks +* are not included) and only holds the Leadout entry. +* +* Heiko Eißfeldt. +*/ ntracks =0 ; stat = cdrom_read_tocentry(drive, CDROM_LEADOUT, 1, 0, (char *)&toc->hdr,
@@ -1473,9 +1462,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) toc->ent[i].addr.msf.frame); } -/* Read the multisession information. */ if (toc->hdr.first_track !=CDROM_LEADOUT ) { -/* Read the multisession information. */ +/* read the multisession information. */ stat =cdrom_read_tocentry (drive,0 ,0 ,1 , (char *)&ms_tmp,sizeof (ms_tmp), sense);if (stat)
@@ -1488,7 +1476,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) }if (info->cd_flags &IDE_CD_FLAG_TOCADDR_AS_BCD ) { -/* Re-read multisession information using MSF format */ +/* re-read multisession information using MSF format */ stat =cdrom_read_tocentry (drive,0 ,1 ,1 , (char *)&ms_tmp,sizeof (ms_tmp), sense);if (stat)
@@ -1502,7 +1490,7 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense) toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track); -/* Now try to get the total cdrom capacity. */ +/* now try to get the total cdrom capacity. */ stat =cdrom_get_last_written (cdi, &last_written);if (!stat && (last_written > toc->capacity)) { toc->capacity = last_written;
@@ -1527,7 +1515,8 @@ int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf) size -=ATAPI_CAPABILITIES_PAGE_PAD_SIZE ;init_cdrom_command (&cgc, buf, size,CGC_DATA_UNKNOWN ); - do { /* we seem to get stat=0x01,err=0x00 the first time (??) */ + do { + /* we seem to get stat=0x01,err=0x00 the first time (??) */ stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0); if (!stat) break;
@@ -1622,11 +1611,10 @@ int ide_cdrom_probe_capabilities(ide_drive_t *drive) }/* -* we have to cheat a little here. the packet will eventually -* be queued with ide_cdrom_packet(), which extracts the -* drive from cdi->handle. Since this device hasn't been -* registered with the Uniform layer yet, it can't do this. -* Same goes for cdi->ops. +* we have to cheat a little here. the packet will eventually be queued +* with ide_cdrom_packet(), which extracts the drive from cdi->handle. +* Since this device hasn't been registered with the Uniform layer yet, +* it can't do this. Same goes for cdi->ops. */ cdi->handle = drive; cdi->ops = &ide_cdrom_dops;
@@ -1695,9 +1683,7 @@ int ide_cdrom_probe_capabilities(ide_drive_t *drive)return nslots; } -/* -* standard prep_rq_fn that builds 10 byte cmds -*/ +/* standard prep_rq_fn that builds 10 byte cmds */ static int ide_cdrom_prep_fs (struct request_queue *q,struct request *rq) {int hard_sect =queue_hardsect_size (q);
@@ -1736,9 +1722,7 @@ static int ide_cdrom_prep_pc(struct request *rq) {u8 *c = rq->cmd; -/* -* Transform 6-byte read/write commands to the 10-byte version -*/ +/* Transform 6-byte read/write commands to the 10-byte version */ if (c[0 ] ==READ_6 || c[0 ] ==WRITE_6 ) { c[8 ] = c[4 ]; c[5 ] = c[3 ];
@@ -1902,13 +1886,12 @@ int ide_cdrom_setup(ide_drive_t *drive) id->fw_rev[4] == '1' && id->fw_rev[6] <= '2') cd->cd_flags |= IDE_CD_FLAG_TOCTRACKS_AS_BCD; else if (cd->cd_flags & IDE_CD_FLAG_SANYO_3CD) - cdi->sanyo_slot = 3; /* 3 => use CD in slot 0 */ +/* 3 => use CD in slot 0 */ + cdi->sanyo_slot = 3; nslots =ide_cdrom_probe_capabilities (drive); -/* -* set correct block size -*/ +/* set correct block size */ blk_queue_hardsect_size (drive->queue,CD_FRAMESIZE ); if (drive->autotune == IDE_TUNE_DEFAULT ||
@@ -2093,7 +2076,7 @@ static struct block_device_operations idecd_ops = { .revalidate_disk = idecd_revalidate_disk }; -/* options */ +/* module options */ static char *ignore;module_param (ignore, charp,0400 );
Signature · 1 line
1.5.4.1
cover ide-cd: trivial fixes
Hi Bart,
here are the ide-cd trivial fixes split in an easier to digest format. I cannot do the md5sum check here since all of the patches change at least one char but i hope that this'll be redundant here since they're trivially easy to review :) now.
drivers/ide/ide-cd.c | 591 +++++++++++++++++++++++++------------------------- 1 files changed, 298 insertions(+), 293 deletions(-)
Thanks,
Boris.
PATCH 2/5 ide-cd: put all proc-related code at one place
--- drivers/ide/ide-cd.c | 71 ++++++++++++++++++++++++------------------------- 1 files changed, 35 insertions(+), 36 deletions(-)
drivers/ide/ide-cd.c +35 -36
@@ -1695,15 +1695,6 @@ int ide_cdrom_probe_capabilities(ide_drive_t *drive)return nslots; } -#ifdef CONFIG_IDE_PROC_FS -static void ide_cdrom_add_settings (ide_drive_t *drive) -{ -ide_add_setting (drive,"dsc_overlap" ,SETTING_RW ,TYPE_BYTE ,0 ,1 ,1 ,1 , &drive->dsc_overlap,NULL ); -} -#else -static inline void ide_cdrom_add_settings (ide_drive_t *drive) { ; } -#endif -/* * standard prep_rq_fn that builds 10 byte cmds */
@@ -1789,6 +1780,41 @@ struct cd_list_entry {unsigned int cd_flags; }; +#ifdef CONFIG_IDE_PROC_FS +static sector_t ide_cdrom_capacity (ide_drive_t *drive) +{ +unsigned long capacity, sectors_per_frame; + +if (cdrom_read_capacity (drive, &capacity, §ors_per_frame,NULL )) +return 0 ; + +return capacity * sectors_per_frame; +} + +static int proc_idecd_read_capacity + (char *page,char **start,off_t off,int count,int *eof,void *data) +{ +ide_drive_t *drive = data; +int len; + + len =sprintf (page,"%llu\n" , (long long )ide_cdrom_capacity (drive)); +PROC_IDE_READ_RETURN (page, start, off, count, eof, len); +} + +static ide_proc_entry_t idecd_proc[] = { + {"capacity" ,S_IFREG |S_IRUGO , proc_idecd_read_capacity,NULL }, + {NULL ,0 ,NULL ,NULL } +}; + +static void ide_cdrom_add_settings (ide_drive_t *drive) +{ +ide_add_setting (drive,"dsc_overlap" ,SETTING_RW ,TYPE_BYTE ,0 ,1 ,1 ,1 , + &drive->dsc_overlap,NULL ); +} +#else +static inline void ide_cdrom_add_settings (ide_drive_t *drive) { ; } +#endif +static const struct cd_list_entry ide_cd_quirks_list[] = {/* Limit transfer size per interrupt. */ {"SAMSUNG CD-ROM SCR-2430" ,NULL ,IDE_CD_FLAG_LIMIT_NFRAMES },
@@ -1930,33 +1956,6 @@ static void ide_cd_release(struct kref *kref)static int ide_cd_probe (ide_drive_t *); -#ifdef CONFIG_IDE_PROC_FS -static sector_t ide_cdrom_capacity (ide_drive_t *drive) -{ -unsigned long capacity, sectors_per_frame; - -if (cdrom_read_capacity (drive, &capacity, §ors_per_frame,NULL )) -return 0 ; - -return capacity * sectors_per_frame; -} - -static int proc_idecd_read_capacity - (char *page,char **start,off_t off,int count,int *eof,void *data) -{ -ide_drive_t *drive = data; -int len; - - len =sprintf (page,"%llu\n" , (long long )ide_cdrom_capacity (drive)); -PROC_IDE_READ_RETURN (page, start, off, count, eof, len); -} - -static ide_proc_entry_t idecd_proc[] = { - {"capacity" ,S_IFREG |S_IRUGO , proc_idecd_read_capacity,NULL }, - {NULL ,0 ,NULL ,NULL } -}; -#endif -static ide_driver_t ide_cdrom_driver = { .gen_driver = { .owner =THIS_MODULE ,
Signature · 1 line
1.5.4.1
PATCH 1/5 ide-cd: include proper headers
In reply to Borislav Petkov--- drivers/ide/ide-cd.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
drivers/ide/ide-cd.c +3 -3
@@ -41,10 +41,10 @@#include <scsi/scsi.h> /* For SCSI -> ATAPI command conversion */ -#include <asm/irq.h> -#include <asm/io.h> +#include <linux/irq.h> +#include <linux/io.h> #include <asm/byteorder.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> #include <asm/unaligned.h> #include "ide-cd.h"
Signature · 1 line
1.5.4.1
Hi,
Quoted 9 lines · Borislav Petkov
Hi Bart,
here are the ide-cd trivial fixes split in an easier to digest format. I cannot do the md5sum check here since all of the patches change at least one char but i hope that this'll be redundant here since they're trivially easy to review :) now.
drivers/ide/ide-cd.c | 591 +++++++++++++++++++++++++------------------------- 1 files changed, 298 insertions(+), 293 deletions(-)
applied everything
BTW patch #3/5 which accounts for 2/3 of the diffstat passes md5sum check here
Re: [PATCH 4/5] ide-cd: shorten lines longer than 80 columns
In reply to Borislav PetkovQuoted 1 line · Borislav Petkov
Signed-off-by Borislav Petkov <[email protected]>
interdiff for the merged version
drivers/ide/ide-cd.c +19 -21
@@ -433,13 +433,13 @@* sector. If we got here the error is not correctable. */ ide_dump_status_no_sense (drive, -"media error (bad sector)" , - stat); +"media error (bad sector)" , + stat); do_end_request =1 ; }else if (sense_key ==BLANK_CHECK ) {/* disk appears blank ?? */ ide_dump_status_no_sense (drive,"media error (blank)" , - stat); + stat); do_end_request =1 ; }else if ((err & ~ABRT_ERR ) !=0 ) {/* go to the default handler for other errors */
@@ -510,7 +510,7 @@default :if (!(rq->cmd_flags &REQ_QUIET ))printk (KERN_INFO "ide-cd: cmd 0x%x timed out\n" , - rq->cmd[0 ]); + rq->cmd[0 ]); wait =0 ;break ; }
@@ -552,7 +552,7 @@/* packet command */ ide_execute_command (drive,WIN_PACKETCMD , handler, -ATAPI_WAIT_PC , cdrom_timer_expiry); +ATAPI_WAIT_PC , cdrom_timer_expiry);return ide_started; }else {unsigned long flags;
@@ -809,7 +809,7 @@ info->dma =0 ; info->start_seek = jiffies;return cdrom_start_packet_command (drive,0 , - cdrom_start_seek_continuation); + cdrom_start_seek_continuation); }/*
@@ -819,8 +819,8 @@static void restore_request (struct request *rq) {if (rq->buffer !=bio_data (rq->bio)) { -sector_t n = (rq->buffer - (char *)bio_data (rq->bio)) / -SECTOR_SIZE ; +sector_t n = + (rq->buffer - (char *)bio_data (rq->bio)) /SECTOR_SIZE ; rq->buffer =bio_data (rq->bio); rq->nr_sectors += n;
@@ -1192,8 +1192,8 @@/* sg request */ if (rq->bio) {int mask = drive->queue->dma_alignment; -unsigned long addr = (unsigned long ) -page_address (bio_page (rq->bio)); +unsigned long addr = + (unsigned long )page_address (bio_page (rq->bio)); info->dma = drive->using_dma;
@@ -1233,16 +1233,14 @@return ide_stopped; }printk (KERN_ERR "%s: DSC timeout\n" , - drive->name); + drive->name); } info->cd_flags &= ~IDE_CD_FLAG_SEEKING ; } -if ((rq_data_dir (rq) ==READ ) && -IDE_LARGE_SEEK (info->last_block, - block, -IDECD_SEEK_THRESHOLD ) && - drive->dsc_overlap) - +if (rq_data_dir (rq) ==READ && +IDE_LARGE_SEEK (info->last_block, block, +IDECD_SEEK_THRESHOLD ) && + drive->dsc_overlap) action =cdrom_start_seek (drive, block);else action =cdrom_start_rw (drive, rq);
@@ -1375,7 +1373,7 @@ toc =kmalloc (sizeof (struct atapi_toc ),GFP_KERNEL );if (toc ==NULL ) {printk (KERN_ERR "%s: No cdrom TOC buffer!\n" , - drive->name); + drive->name);return -ENOMEM ; } info->toc = toc;
@@ -1619,7 +1617,7 @@if (drive->media == ide_optical) { cdi->mask &= ~(CDC_MO_DRIVE |CDC_RAM );printk (KERN_ERR "%s: ATAPI magneto-optical drive\n" , - drive->name); + drive->name);return nslots; }
@@ -2118,7 +2116,7 @@if (ignore !=NULL ) {if (strstr (ignore, drive->name)) {printk (KERN_INFO "ide-cd: ignoring drive %s\n" , - drive->name); + drive->name); goto failed; } }
@@ -2130,7 +2128,7 @@ info =kzalloc (sizeof (struct cdrom_info ),GFP_KERNEL );if (info ==NULL ) {printk (KERN_ERR "%s: Can't allocate a cdrom structure\n" , - drive->name); + drive->name); goto failed; }
Re: [PATCH 3/5] ide-cd: fixup comments
In reply to Borislav PetkovQuoted 1 line · Borislav Petkov
Signed-off-by Borislav Petkov <[email protected]>
interdiff for the merged version
drivers/ide/ide-cd.c +40 -42
@@ -296,7 +296,7 @@struct request *rq =HWGROUP (drive)->rq;int stat, err, sense_key; -/* check for errors. */ +/* check for errors */ stat =ide_read_status (drive);if (stat_ret)
@@ -305,7 +305,7 @@if (OK_STAT (stat, good_stat,BAD_R_STAT ))return 0 ; -/* get the IDE error register. */ +/* get the IDE error register */ err =ide_read_error (drive); sense_key = err >>4 ;
@@ -335,11 +335,11 @@if (blk_pc_request (rq) && !rq->errors) rq->errors =SAM_STAT_CHECK_CONDITION ; -/* check for tray open. */ +/* check for tray open */ if (sense_key ==NOT_READY ) {cdrom_saw_media_change (drive); }else if (sense_key ==UNIT_ATTENTION ) { -/* check for media change. */ +/* check for media change */ cdrom_saw_media_change (drive);return 0 ; } else if (sense_key == ILLEGAL_REQUEST &&
@@ -352,7 +352,7 @@* cdrom_log_sense() knows this! */ }else if (!(rq->cmd_flags &REQ_QUIET )) { -/* otherwise, print an error. */ +/* otherwise, print an error */ ide_dump_status (drive,"packet command error" , stat); }
@@ -368,24 +368,24 @@ }else if (blk_fs_request (rq)) {int do_end_request =0 ; -/* handle errors from READ and WRITE requests. */ +/* handle errors from READ and WRITE requests */ if (blk_noretry_request (rq)) do_end_request =1 ;if (sense_key ==NOT_READY ) { -/* tray open. */ +/* tray open */ if (rq_data_dir (rq) ==READ ) {cdrom_saw_media_change (drive); -/* fail the request. */ +/* fail the request */ printk ("%s: tray open\n" , drive->name); do_end_request =1 ; }else {struct cdrom_info *info = drive->driver_data;/* -* allow the drive 5 seconds to recover, some +* Allow the drive 5 seconds to recover, some * devices will return this error while flushing * data from cache. */
@@ -408,7 +408,7 @@ } } }else if (sense_key ==UNIT_ATTENTION ) { -/* media change. */ +/* media change */ cdrom_saw_media_change (drive);/*
@@ -437,11 +437,11 @@ide_dump_status_no_sense (drive,"media error (blank)" , stat); do_end_request =1 ; }else if ((err & ~ABRT_ERR ) !=0 ) { -/* go to the default handler for other errors. */ +/* go to the default handler for other errors */ ide_error (drive,"cdrom_decode_status" , stat);return 1 ; }else if ((++rq->errors >ERROR_MAX )) { -/* we've racked up too many retries, abort. */ +/* we've racked up too many retries, abort */ do_end_request =1 ; }
@@ -464,7 +464,7 @@cdrom_end_request (drive,0 ); } -/* retry, or handle the next request. */ +/* retry, or handle the next request */ return 1 ; end_request:
@@ -527,7 +527,7 @@struct cdrom_info *info = drive->driver_data;ide_hwif_t *hwif = drive->hwif; -/* wait for the controller to be idle. */ +/* wait for the controller to be idle */ if (ide_wait_stat (&startstop, drive,0 ,BUSY_STAT ,WAIT_READY ))return startstop;
@@ -535,7 +535,7 @@if (info->dma) info->dma = !hwif->dma_setup (drive); -/* set up the controller registers. */ +/* set up the controller registers */ ide_pktcmd_tf_load (drive,IDE_TFLAG_OUT_NSECT |IDE_TFLAG_OUT_LBAL |IDE_TFLAG_NO_SELECT_MASK , xferlen, info->dma);
@@ -583,21 +583,21 @@* from the device. DRQ should how be set. */ -/* check for errors. */ +/* check for errors */ if (cdrom_decode_status (drive,DRQ_STAT ,NULL ))return ide_stopped; -/* ok, next interrupt will be DMA interrupt. */ +/* ok, next interrupt will be DMA interrupt */ if (info->dma) drive->waiting_for_dma =1 ; }else { -/* otherwise, we must wait for DRQ to get set. */ +/* otherwise, we must wait for DRQ to get set */ if (ide_wait_stat (&startstop, drive,DRQ_STAT ,BUSY_STAT ,WAIT_READY ))return startstop; } -/* arm the interrupt handler. */ +/* arm the interrupt handler */ ide_set_handler (drive, handler, rq->timeout, cdrom_timer_expiry);/* ATAPI commands get padded out to 12 bytes minimum */
@@ -605,7 +605,7 @@if (cmd_len <ATAPI_MIN_CDB_BYTES ) cmd_len =ATAPI_MIN_CDB_BYTES ; -/* send the command to the device. */ +/* send the command to the device */ HWIF (drive)->atapi_output_bytes (drive, rq->cmd, cmd_len);/* start the DMA if need be */
@@ -664,7 +664,7 @@ }else if (rw ==0 && ireason ==1 ) {/* * Some drives (ASUS) seem to tell us that status info is -* available. just get it and ignore. +* available. Just get it and ignore. */ (void )ide_read_status (drive);return 0 ;
@@ -754,7 +754,7 @@/* set up the command */ rq->timeout =ATAPI_WAIT_PC ; -/* send the command to the drive and return. */ +/* send the command to the drive and return */ return cdrom_transfer_packet_command (drive, rq, cdrom_newpc_intr); }
@@ -774,9 +774,8 @@ info->cd_flags |=IDE_CD_FLAG_SEEKING ;if (retry &&time_after (jiffies, info->start_seek +IDECD_SEEK_TIMER )) { -if (--retry ==0 ) { - drive->dsc_overlap =0 ; - } +if (--retry ==0 ) + drive->dsc_overlap =0 ; }return ide_stopped; }
@@ -850,7 +849,7 @@if (rq->sense ==NULL ) rq->sense = &sense; -/* start of retry loop. */ +/* start of retry loop */ do { int error; unsigned long time = jiffies;
@@ -881,16 +880,16 @@*/ ssleep (2 ); }else { -/* otherwise, don't retry. */ +/* otherwise, don't retry */ retries =0 ; } --retries; } -/* end of retry loop. */ +/* end of retry loop */ }while ((rq->cmd_flags &REQ_FAILED ) && retries >=0 ); -/* return an error if the command failed. */ +/* return an error if the command failed */ return (rq->cmd_flags &REQ_FAILED ) ? -EIO :0 ; }
@@ -916,7 +915,7 @@unsigned int timeout;u8 lowcyl, highcyl; -/* check for errors. */ +/* check for errors */ dma = info->dma;if (dma) { info->dma =0 ;
@@ -942,7 +941,7 @@ goto end_request; } -/* ok we fall to pio :/ */ +/* ok we fall to pio :/ */ ireason = hwif->INB (hwif->io_ports[IDE_IREASON_OFFSET ]) &0x3 ; lowcyl = hwif->INB (hwif->io_ports[IDE_BCOUNTL_OFFSET ]); highcyl = hwif->INB (hwif->io_ports[IDE_BCOUNTH_OFFSET ]);
@@ -974,7 +973,7 @@return ide_stopped; }else if (!blk_pc_request (rq)) {ide_cd_request_sense_fixup (rq); -/* complain if we still have data left to transfer. */ +/* complain if we still have data left to transfer */ uptodate = rq->data_len ?0 :1 ; } goto end_request;
@@ -1155,7 +1154,7 @@if (write) cd->devinfo.media_written =1 ; -/* start sending the read/write request to the drive. */ +/* start sending the read/write request to the drive */ return cdrom_start_packet_command (drive,32768 , cdrom_start_rw_cont); }
@@ -1197,7 +1196,7 @@ info->dma =0 ; } -/* start sending the command to the drive. */ +/* start sending the command to the drive */ return cdrom_start_packet_command (drive, rq->data_len, cdrom_do_newpc_cont); }
@@ -1234,7 +1233,6 @@ rq->cmd_type == REQ_TYPE_ATA_PC) {return cdrom_do_block_pc (drive, rq); } else if (blk_special_request(rq)) { -/* right now this can only be a reset... */ cdrom_end_request (drive,1 );return ide_stopped;
@@ -1372,7 +1370,7 @@if (info->cd_flags &IDE_CD_FLAG_TOC_VALID )return 0 ; -/* try to get the total cdrom capacity and sector size. */ +/* try to get the total cdrom capacity and sector size */ stat =cdrom_read_capacity (drive, &toc->capacity, §ors_per_frame, sense);if (stat)
@@ -1385,7 +1383,7 @@blk_queue_hardsect_size (drive->queue, sectors_per_frame <<SECTOR_BITS ); -/* first read just the header, so we know how long the TOC is. */ +/* first read just the header, so we know how long the TOC is */ stat =cdrom_read_tocentry (drive,0 ,1 ,0 , (char *) &toc->hdr,sizeof (struct atapi_toc_header ), sense);if (stat)
@@ -1402,7 +1400,7 @@if (ntracks >MAX_TRACKS ) ntracks =MAX_TRACKS ; -/* now read the whole schmeer. */ +/* now read the whole schmeer */ stat = cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0, (char *)&toc->hdr, sizeof(struct atapi_toc_header) +
@@ -1463,7 +1461,7 @@ }if (toc->hdr.first_track !=CDROM_LEADOUT ) { -/* read the multisession information. */ +/* read the multisession information */ stat =cdrom_read_tocentry (drive,0 ,0 ,1 , (char *)&ms_tmp,sizeof (ms_tmp), sense);if (stat)
@@ -1490,7 +1488,7 @@ toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track); -/* now try to get the total cdrom capacity. */ +/* now try to get the total cdrom capacity */ stat =cdrom_get_last_written (cdi, &last_written);if (!stat && (last_written > toc->capacity)) { toc->capacity = last_written;
@@ -1611,7 +1609,7 @@ }/* -* we have to cheat a little here. the packet will eventually be queued +* We have to cheat a little here. the packet will eventually be queued * with ide_cdrom_packet(), which extracts the drive from cdi->handle. * Since this device hasn't been registered with the Uniform layer yet, * it can't do this. Same goes for cdi->ops.
@@ -1722,7 +1720,7 @@ {u8 *c = rq->cmd; -/* Transform 6-byte read/write commands to the 10-byte version */ +/* transform 6-byte read/write commands to the 10-byte version */ if (c[0 ] ==READ_6 || c[0 ] ==WRITE_6 ) { c[8 ] = c[4 ]; c[5 ] = c[3 ];
Re: [PATCH 5/5] ide-cd: fix remaining checkpatch.pl issues
In reply to Borislav PetkovQuoted 7 lines · Borislav Petkov
Some of them are:
WARNING: braces {} are not necessary for single statement blocks
CHECK: multiple assignments should be avoided
WARNING:printk()should includeKERN_facility level
WARNING: no space between function name and open parenthesis '('Signed-off-by Borislav Petkov <[email protected]>
interdiff for the merged version
drivers/ide/ide-cd.c +4 -5
@@ -185,8 +185,7 @@if (valid <0 ) valid =0 ;if (sector <get_capacity (info->disk) && - drive->probed_capacity - sector <4 *75 ) - + drive->probed_capacity - sector <4 *75 )set_capacity (info->disk, sector); } }
@@ -218,7 +217,7 @@ rq->data = sense; rq->cmd[0 ] =GPCMD_REQUEST_SENSE ; - rq->cmd[4 ] =18 ; + rq->cmd[4 ] =18 ; rq->data_len =18 ; rq->cmd_type =REQ_TYPE_SENSE ;
@@ -310,8 +309,8 @@ sense_key = err >>4 ;if (rq ==NULL ) { -printk (KERN_ERR "%s: missing rq in cdrom_decode_status\n" , - drive->name); +printk (KERN_ERR "%s: missing rq in %s\n" , + drive->name, __func__);return 1 ; }
Re: [PATCH 4/5] ide-cd: shorten lines longer than 80 columns
In reply to Bartlomiej ZolnierkiewiczQuoted 26 lines · Bartlomiej Zolnierkiewicz
Quoted 1 line · Borislav Petkov
Signed-off-by Borislav Petkov <[email protected]>interdiff for the merged version
diff -u
b/drivers/ide/ide-cd.cb/drivers/ide/ide-cd.cdrivers/ide/ide-cd.c +3
-3@@ -433,13 +433,13 @@* sector. If we got here the error is not correctable. */ ide_dump_status_no_sense (drive, -"media error (bad sector)" , - stat); +"media error (bad sector)" , + stat); do_end_request =1 ; }else if (sense_key ==BLANK_CHECK ) {/* disk appears blank ?? */ ide_dump_status_no_sense (drive,"media error (blank)" , - stat); + stat); do_end_request =1 ; }else if ((err & ~ABRT_ERR ) !=0 ) {/* go to the default handler for other errors */
drivers/ide/ide-cd.c line 513
Quoted 5 lines
drivers/ide/ide-cd.c +1
-1@@ -510,7 +510,7 @@default :if (!(rq->cmd_flags &REQ_QUIET ))printk (KERN_INFO "ide-cd: cmd 0x%x timed out\n" , - rq->cmd[0 ]); + rq->cmd[0 ]);
why do you push the rq->cmd[0] thingy back here. Shouldn't it be aligned with the opening brace as the zillion others so far?
Quoted 22 lines
drivers/ide/ide-cd.c +2
-2wait =0 ;break ; }@@ -552,7 +552,7 @@/* packet command */ ide_execute_command (drive,WIN_PACKETCMD , handler, -ATAPI_WAIT_PC , cdrom_timer_expiry); +ATAPI_WAIT_PC , cdrom_timer_expiry);return ide_started; }else {unsigned long flags;@@ -809,7 +809,7 @@ info->dma =0 ; info->start_seek = jiffies;return cdrom_start_packet_command (drive,0 , - cdrom_start_seek_continuation); + cdrom_start_seek_continuation); }/*
drivers/ide/ide-cd.c line 823
Quoted 7 lines
drivers/ide/ide-cd.c +2
-2@@ -819,8 +819,8 @@static void restore_request (struct request *rq) {if (rq->buffer !=bio_data (rq->bio)) { -sector_t n = (rq->buffer - (char *)bio_data (rq->bio)) / -SECTOR_SIZE ; +sector_t n = + (rq->buffer - (char *)bio_data (rq->bio)) /SECTOR_SIZE ;
i must say, lines like this one always look ugly, no matter the formatting tricks.
Quoted 71 lines
drivers/ide/ide-cd.c +11
-13rq->buffer =bio_data (rq->bio); rq->nr_sectors += n;@@ -1192,8 +1192,8 @@/* sg request */ if (rq->bio) {int mask = drive->queue->dma_alignment; -unsigned long addr = (unsigned long ) -page_address (bio_page (rq->bio)); +unsigned long addr = + (unsigned long )page_address (bio_page (rq->bio)); info->dma = drive->using_dma;@@ -1233,16 +1233,14 @@return ide_stopped; }printk (KERN_ERR "%s: DSC timeout\n" , - drive->name); + drive->name); } info->cd_flags &= ~IDE_CD_FLAG_SEEKING ; } -if ((rq_data_dir (rq) ==READ ) && -IDE_LARGE_SEEK (info->last_block, - block, -IDECD_SEEK_THRESHOLD ) && - drive->dsc_overlap) - +if (rq_data_dir (rq) ==READ && +IDE_LARGE_SEEK (info->last_block, block, +IDECD_SEEK_THRESHOLD ) && + drive->dsc_overlap) action =cdrom_start_seek (drive, block);else action =cdrom_start_rw (drive, rq);@@ -1375,7 +1373,7 @@ toc =kmalloc (sizeof (struct atapi_toc ),GFP_KERNEL );if (toc ==NULL ) {printk (KERN_ERR "%s: No cdrom TOC buffer!\n" , - drive->name); + drive->name);return -ENOMEM ; } info->toc = toc;@@ -1619,7 +1617,7 @@if (drive->media == ide_optical) { cdi->mask &= ~(CDC_MO_DRIVE |CDC_RAM );printk (KERN_ERR "%s: ATAPI magneto-optical drive\n" , - drive->name); + drive->name);return nslots; }@@ -2118,7 +2116,7 @@if (ignore !=NULL ) {if (strstr (ignore, drive->name)) {printk (KERN_INFO "ide-cd: ignoring drive %s\n" , - drive->name); + drive->name); goto failed; } }@@ -2130,7 +2128,7 @@ info =kzalloc (sizeof (struct cdrom_info ),GFP_KERNEL );if (info ==NULL ) {printk (KERN_ERR "%s: Can't allocate a cdrom structure\n" , - drive->name); + drive->name); goto failed; }
Signature · 2 lines
Regards/Gruß,
Boris.Quoted 11 lines · Bartlomiej Zolnierkiewicz
Hi,
Quoted 7 lines · Borislav Petkov
Hi Bart,
here are the ide-cd trivial fixes split in an easier to digest format. I cannot do the md5sum check here since all of the patches change at least one char but i hope that this'll be redundant here since they're trivially easy to review :) now.
Quoted 6 lines
Quoted 2 lines
drivers/ide/ide-cd.c | 591 +++++++++++++++++++++++++------------------------- 1 files changed, 298 insertions(+), 293 deletions(-)applied everything
BTW patch #3/5 which accounts for 2/3 of the diffstat passes md5sum check here
huh, are you sure? The fixup-comments patch adds at least one char to the source file so the md5sums cannot be the same.
Signature · 2 lines
Regards/Gruß,
Boris.Re: [PATCH 4/5] ide-cd: shorten lines longer than 80 columns
In reply to Borislav PetkovQuoted 6 lines · Borislav Petkov
Quoted 5 lines · Bartlomiej Zolnierkiewicz
Quoted 1 line · Borislav Petkov
Signed-off-by Borislav Petkov <[email protected]>interdiff for the merged version
[...]
Quoted 4 lines
Quoted 4 lines
diff -u
b/drivers/ide/ide-cd.cb/drivers/ide/ide-cd.cdrivers/ide/ide-cd.c +0
-0@@ -510,7 +510,7 @@
Quoted 8 lines
drivers/ide/ide-cd.c line 513
Quoted 5 lines
drivers/ide/ide-cd.c +1
-1default :if (!(rq->cmd_flags &REQ_QUIET ))printk (KERN_INFO "ide-cd: cmd 0x%x timed out\n" , - rq->cmd[0 ]); + rq->cmd[0 ]);why do you push the rq->cmd[0] thingy back here. Shouldn't it be aligned with the opening brace as the zillion others so far?
IDE is quite consistent with the above style but maybe it is just me being used to it. I could revert this change if you feel strong about it...
Quoted 11 lines
drivers/ide/ide-cd.c line 823
Quoted 8 lines
drivers/ide/ide-cd.c +2
-2@@ -819,8 +819,8 @@static void restore_request (struct request *rq) {if (rq->buffer !=bio_data (rq->bio)) { -sector_t n = (rq->buffer - (char *)bio_data (rq->bio)) / -SECTOR_SIZE ; +sector_t n = + (rq->buffer - (char *)bio_data (rq->bio)) /SECTOR_SIZE ;i must say, lines like this one always look ugly, no matter the formatting tricks.
For this case there is a simple solution: fix ide-cd to use hwif->sg_table instead of having it to walk rq->bio's and the whole function will vanish. ;-)
[ IOW We are putting way too much time into these coding style fixes and as
the old code is replaced with the new one the coding style improves itself. ]
Thanks,
Bart
Quoted 15 lines · Borislav Petkov
Quoted 14 lines · Bartlomiej Zolnierkiewicz
Hi,
Quoted 9 lines · Borislav Petkov
Hi Bart,
here are the ide-cd trivial fixes split in an easier to digest format. I cannot do the md5sum check here since all of the patches change at least one char but i hope that this'll be redundant here since they're trivially easy to review :) now.
drivers/ide/ide-cd.c | 591 +++++++++++++++++++++++++------------------------- 1 files changed, 298 insertions(+), 293 deletions(-)
Quoted 6 lines
Quoted 3 lines
applied everything
BTW patch #3/5 which accounts for 2/3 of the diffstat passes md5sum check here
huh, are you sure? The fixup-comments patch adds at least one char to the source file so the md5sums cannot be the same.
OTOH md5sums of the resulting _binary_ files matches... ;-)
Re: [PATCH 4/5] ide-cd: shorten lines longer than 80 columns
In reply to Bartlomiej ZolnierkiewiczOn Thursday 28 February 2008, Bartlomiej Zolnierkiewicz wrote:
[...]
Quoted 2 lines
[ IOW We are putting way too much time into these coding style fixes and as
the old code is replaced with the new one the coding style improves itself. ]
Just to clarify: by "these" I meant only ide-cd ones, i.e. we are beautifying comments for code which is going to be heavily modified soon because of other changes like ATAPI handling unification...
Quoted 16 lines · Bartlomiej Zolnierkiewicz
Quoted 15 lines · Borislav Petkov
Quoted 14 lines · Bartlomiej Zolnierkiewicz
Hi,
Quoted 9 lines · Borislav Petkov
Hi Bart,
here are the ide-cd trivial fixes split in an easier to digest format. I cannot do the md5sum check here since all of the patches change at least one char but i hope that this'll be redundant here since they're trivially easy to review :) now.
drivers/ide/ide-cd.c | 591 +++++++++++++++++++++++++------------------------- 1 files changed, 298 insertions(+), 293 deletions(-)
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
applied everything
BTW patch #3/5 which accounts for 2/3 of the diffstat passes md5sum check here
huh, are you sure? The fixup-comments patch adds at least one char to the source file so the md5sums cannot be the same.
OTOH md5sums of the resulting _binary_ files matches... ;-)
right, the compiler discards all comments during compilation and the sole code remains unchanged.
Signature · 2 lines
Regards/Gruß,
Boris.Re: [PATCH 4/5] ide-cd: shorten lines longer than 80 columns
In reply to Bartlomiej ZolnierkiewiczQuoted 23 lines · Bartlomiej Zolnierkiewicz
Quoted 6 lines · Borislav Petkov
Quoted 5 lines · Bartlomiej Zolnierkiewicz
Quoted 1 line · Borislav Petkov
Signed-off-by Borislav Petkov <[email protected]>interdiff for the merged version
[...]
Quoted 4 lines
Quoted 4 lines
diff -u
b/drivers/ide/ide-cd.cb/drivers/ide/ide-cd.cdrivers/ide/ide-cd.c +0
-0@@ -510,7 +510,7 @@Quoted 8 lines
drivers/ide/ide-cd.c line 513
Quoted 5 lines
drivers/ide/ide-cd.c +1
-1default :if (!(rq->cmd_flags &REQ_QUIET ))printk (KERN_INFO "ide-cd: cmd 0x%x timed out\n" , - rq->cmd[0 ]); + rq->cmd[0 ]);why do you push the rq->cmd[0] thingy back here. Shouldn't it be aligned with the opening brace as the zillion others so far?
Quoted 3 lines
IDE is quite consistent with the above style but maybe it is just me being used to it. I could revert this change if you feel strong about it...
not at all, i'm not that concerned with codestyle issues as long as it is mostly readable :). The only issue of importance is consistency along all the source files so i'll try to keep up with the rest of ide.
Quoted 12 lines
Quoted 11 lines
drivers/ide/ide-cd.c line 823
Quoted 8 lines
drivers/ide/ide-cd.c +2
-2@@ -819,8 +819,8 @@static void restore_request (struct request *rq) {if (rq->buffer !=bio_data (rq->bio)) { -sector_t n = (rq->buffer - (char *)bio_data (rq->bio)) / -SECTOR_SIZE ; +sector_t n = + (rq->buffer - (char *)bio_data (rq->bio)) /SECTOR_SIZE ;i must say, lines like this one always look ugly, no matter the formatting tricks.
Quoted 2 lines
For this case there is a simple solution: fix ide-cd to use
hwif->sg_tableinstead of having it to walk rq->bio's and the whole function will vanish. ;-)
Is this hwif->sg_table walk something similar to what it is being done in ide_build_sglist() or ide_build_dmatable()?
Quoted 2 lines
[ IOW We are putting way too much time into these coding style fixes and as
the old code is replaced with the new one the coding style improves itself. ]
Exactly my thoughts. On the one hand, it is important to clean up the code before you stare at it for a magnitude of hours looking for bugs and actually this cleanup was supposed to be really brief, to begin with, but you know how things really work out in reality :). On the other hand, there are places in ide-cd that are just horrible and need rewriting, besides API changes.
On a different note, i'm working on ripping out pipelining from ide-tape since this'll make ATAPI unification a lot easier. Do you happen to have figured out what this tape->merge_stage is supposed to do, i know it is a pipeline stage and in all r/w requests the tape->merge_stage->bh is the buffer that receives/sends the data to/from the device but still it looks really strange. What i've done so far is remove the pipeline control algos and have kept the tape->merge_stage for simplicity. In a different cycle i'll have to kick it out too replacing it with a simple data buffer.
Any ideas?
Thanks.
Signature · 2 lines
Regards/Gruß,
Boris.